McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 11

Question 100

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing enterprise campus, data center and SD-WAN architecture during a customer network audit (HCIP-H12-821-SOLUTIONS-025). The observed network issue is: An SDN-WAN solution diagram confuses centralized orchestration with the devices that actually forward WAN packets. Which next engineering action best addresses the reported problem?

  1. Align VRRP preemption settings and timing with the intended maintenance policy.
  2. Separate controller management, control policy and forwarding-plane responsibilities in the proposed architecture.
  3. Design a stable routed IP underlay then add the intended VXLAN or EVPN overlay service.
  4. Verify and permit authorized BGP TCP transport in both directions without exposing unrelated services.

Explanation

Correct Answer

B:

The directly responsive action is: Separate controller management, control policy and forwarding-plane responsibilities in the proposed architecture. The specific reported fault is: An SDN-WAN solution diagram confuses centralized orchestration with the devices that actually forward WAN packets. Confirmation should show: Device configurations and observed traffic follow controller intent without treating the controller as universal data transit. The supporting technical principle is: SDN separates management and control orchestration from packet forwarding where the architecture permits.

Incorrect Answers

A:

“Align VRRP preemption settings and timing with the intended maintenance policy” responds to another technical or business failure: A maintenance engineer expects a higher-priority VRRP router to take back Master instantly although preemption is disabled. That source case depends on: VRRP priority and preemption behavior are separate configured failover choices. The present issue is: An SDN-WAN solution diagram confuses centralized orchestration with the devices that actually forward WAN packets. The more direct action is “Separate controller management, control policy and forwarding-plane responsibilities in the proposed architecture” because SDN separates management and control orchestration from packet forwarding where the architecture permits.

C:

“Design a stable routed IP underlay then add the intended VXLAN or EVPN overlay service” responds to another technical or business failure: A data center project assumes any VXLAN service works without adequate underlay IP reachability between VTEPs. That source case depends on: Overlay reachability depends on reliable underlay transport and consistent endpoint mappings. The present issue is: An SDN-WAN solution diagram confuses centralized orchestration with the devices that actually forward WAN packets. The more direct action is “Separate controller management, control policy and forwarding-plane responsibilities in the proposed architecture” because SDN separates management and control orchestration from packet forwarding where the architecture permits.

D:

“Verify and permit authorized BGP TCP transport in both directions without exposing unrelated services” responds to another technical or business failure: A border router can ping an eBGP peer yet session establishment fails because firewall ACL blocks TCP port 179. That source case depends on: IP reachability alone does not imply that BGP TCP transport is permitted. The present issue is: An SDN-WAN solution diagram confuses centralized orchestration with the devices that actually forward WAN packets. The more direct action is “Separate controller management, control policy and forwarding-plane responsibilities in the proposed architecture” because SDN separates management and control orchestration from packet forwarding where the architecture permits.

Question 101

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing VRRP, BFD and redundancy design during a controlled failover exercise (HCIP-H12-821-RELIABILITY-026). The observed network issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. Which routing, switching, or network principle best explains the appropriate solution?

  1. BFD monitors a forwarding path but does not by itself create routing advertisements.
  2. Hardware redundancy only improves availability when dependent paths are also redundant.
  3. BFD detection speed depends on compatible transmit and receive timers and multiplier behavior.
  4. VRRP interface or route tracking can couple gateway priority to actual upstream health.

Explanation

Correct Answer

A:

The governing principle is: BFD monitors a forwarding path but does not by itself create routing advertisements. In this scenario, the appropriate action is: Verify routing protocol and FIB state separately from the BFD liveliness signal. Valid evidence would show: BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB.

Incorrect Answers

B:

“Hardware redundancy only improves availability when dependent paths are also redundant” responds to another technical or business failure: A switch stack offers redundant members but its sole uplink attaches to one device and remains a failure point. That source case depends on: Hardware redundancy only improves availability when dependent paths are also redundant. The present issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The more direct action is “BFD monitors a forwarding path but does not by itself create routing advertisements” because BFD monitors a forwarding path but does not by itself create routing advertisements.

C:

“BFD detection speed depends on compatible transmit and receive timers and multiplier behavior” responds to another technical or business failure: BFD keeps an OSPF neighbor Down even after link restoration because the negotiated intervals or detection multiplier are incompatible. That source case depends on: BFD detection speed depends on compatible transmit and receive timers and multiplier behavior. The present issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The more direct action is “BFD monitors a forwarding path but does not by itself create routing advertisements” because BFD monitors a forwarding path but does not by itself create routing advertisements.

D:

“VRRP interface or route tracking can couple gateway priority to actual upstream health” responds to another technical or business failure: A VRRP standby router never becomes master after the preferred uplink fails because only the physical LAN interface remains Up. That source case depends on: VRRP interface or route tracking can couple gateway priority to actual upstream health. The present issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The more direct action is “BFD monitors a forwarding path but does not by itself create routing advertisements” because BFD monitors a forwarding path but does not by itself create routing advertisements.

Question 102

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing VRRP, BFD and redundancy design during a controlled failover exercise (HCIP-H12-821-RELIABILITY-026). The observed network issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. Which next engineering action best addresses the reported problem?

  1. Review BFD session negotiation parameters and protocol association at both ends.
  2. Verify routing protocol and FIB state separately from the BFD liveliness signal.
  3. Identify shared physical dependencies and add independent power or placement where feasible.
  4. Align VRRP preemption settings and timing with the intended maintenance policy.

Explanation

Correct Answer

B:

The directly responsive action is: Verify routing protocol and FIB state separately from the BFD liveliness signal. The specific reported fault is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. Confirmation should show: BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB. The supporting technical principle is: BFD monitors a forwarding path but does not by itself create routing advertisements.

Incorrect Answers

A:

“Review BFD session negotiation parameters and protocol association at both ends” responds to another technical or business failure: BFD keeps an OSPF neighbor Down even after link restoration because the negotiated intervals or detection multiplier are incompatible. That source case depends on: BFD detection speed depends on compatible transmit and receive timers and multiplier behavior. The present issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The more direct action is “Verify routing protocol and FIB state separately from the BFD liveliness signal” because BFD monitors a forwarding path but does not by itself create routing advertisements.

C:

“Identify shared physical dependencies and add independent power or placement where feasible” responds to another technical or business failure: A campus design has redundant routers and switches but both power feeds terminate on one supply circuit. That source case depends on: Network reliability depends on eliminating shared risks, not only duplicating network devices. The present issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The more direct action is “Verify routing protocol and FIB state separately from the BFD liveliness signal” because BFD monitors a forwarding path but does not by itself create routing advertisements.

D:

“Align VRRP preemption settings and timing with the intended maintenance policy” responds to another technical or business failure: A maintenance engineer expects a higher-priority VRRP router to take back Master instantly although preemption is disabled. That source case depends on: VRRP priority and preemption behavior are separate configured failover choices. The present issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The more direct action is “Verify routing protocol and FIB state separately from the BFD liveliness signal” because BFD monitors a forwarding path but does not by itself create routing advertisements.

Question 103

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing VRRP, BFD and redundancy design during a controlled failover exercise (HCIP-H12-821-RELIABILITY-026). The observed network issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. Which ongoing preventive or detective control would best reduce recurrence?

  1. Compare configured and negotiated BFD timers during network changes.
  2. Verify VRRP version and group compatibility before device replacements.
  3. Check both BFD and route installation in availability acceptance.
  4. Test BFD-down consequences under a controlled far-end path outage.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Check both BFD and route installation in availability acceptance. This directly addresses the recurring fault: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The corrective action would be: Verify routing protocol and FIB state separately from the BFD liveliness signal. Success is demonstrated when: BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB.

Incorrect Answers

A:

“Compare configured and negotiated BFD timers during network changes” addresses recurrence of another problem: BFD keeps an OSPF neighbor Down even after link restoration because the negotiated intervals or detection multiplier are incompatible. That problem depends on: The preventive or detective safeguard is: Compare configured and negotiated BFD timers during network changes. The recurring risk here is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The more targeted safeguard is “Check both BFD and route installation in availability acceptance” because the preventive or detective safeguard is: Check both BFD and route installation in availability acceptance.

B:

“Verify VRRP version and group compatibility before device replacements” addresses recurrence of another problem: Two VRRP routers advertise the same group but use mismatched authentication or version support settings. That problem depends on: The preventive or detective safeguard is: Verify VRRP version and group compatibility before device replacements. The recurring risk here is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The more targeted safeguard is “Check both BFD and route installation in availability acceptance” because the preventive or detective safeguard is: Check both BFD and route installation in availability acceptance.

D:

“Test BFD-down consequences under a controlled far-end path outage” addresses recurrence of another problem: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. That problem depends on: The preventive or detective safeguard is: Test BFD-down consequences under a controlled far-end path outage. The recurring risk here is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The more targeted safeguard is “Check both BFD and route installation in availability acceptance” because the preventive or detective safeguard is: Check both BFD and route installation in availability acceptance.

Question 104

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing VRRP, BFD and redundancy design during a controlled failover exercise (HCIP-H12-821-RELIABILITY-026). The observed network issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. Which observation most directly verifies that the corrective change succeeded?

  1. BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB.
  2. Controlled loss of one supply feed preserves the defined critical forwarding service.
  3. The BFD session reaches Up and OSPF resumes the intended stable adjacency.
  4. Loss of the tracked path leads to the intended gateway failover while user hosts retain their virtual address.

Explanation

Correct Answer

A:

The best verification observation is: BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB. It demonstrates the corrective action: Verify routing protocol and FIB state separately from the BFD liveliness signal. This fits the principle: BFD monitors a forwarding path but does not by itself create routing advertisements. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“Controlled loss of one supply feed preserves the defined critical forwarding service” responds to another technical or business failure: A campus design has redundant routers and switches but both power feeds terminate on one supply circuit. That source case depends on: The best verification observation is: Controlled loss of one supply feed preserves the defined critical forwarding service. The present issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The more direct action is “BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB” because the best verification observation is: BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB.

C:

“The BFD session reaches Up and OSPF resumes the intended stable adjacency” responds to another technical or business failure: BFD keeps an OSPF neighbor Down even after link restoration because the negotiated intervals or detection multiplier are incompatible. That source case depends on: The best verification observation is: The BFD session reaches Up and OSPF resumes the intended stable adjacency. The present issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The more direct action is “BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB” because the best verification observation is: BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB.

D:

“Loss of the tracked path leads to the intended gateway failover while user hosts retain their virtual address” responds to another technical or business failure: A VRRP standby router never becomes master after the preferred uplink fails because only the physical LAN interface remains Up. That source case depends on: The best verification observation is: Loss of the tracked path leads to the intended gateway failover while user hosts retain their virtual address. The present issue is: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. The more direct action is “BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB” because the best verification observation is: BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB.

Question 105

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing controller-managed enterprise WLAN during a supervised route change (HCIP-H12-821-WLAN-027). The observed network issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. Which routing, switching, or network principle best explains the appropriate solution?

  1. WLAN centralized management requires a healthy control channel independent of user radio frames.
  2. Wireless authentication and security posture authorization solve different access-control requirements.
  3. WLAN roaming outcomes depend on consistent client network mapping and mobility design.
  4. Enterprise WLAN admission can use centralized identity authorization rather than shared open access.

Explanation

Correct Answer

D:

The governing principle is: Enterprise WLAN admission can use centralized identity authorization rather than shared open access. In this scenario, the appropriate action is: Configure a supported 802.1X and RADIUS authentication policy and validate appropriate encryption. Valid evidence would show: Authorized identities connect to the WLAN while invalid credentials are denied.

Incorrect Answers

A:

“WLAN centralized management requires a healthy control channel independent of user radio frames” responds to another technical or business failure: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. That source case depends on: WLAN centralized management requires a healthy control channel independent of user radio frames. The present issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The more direct action is “Enterprise WLAN admission can use centralized identity authorization rather than shared open access” because Enterprise WLAN admission can use centralized identity authorization rather than shared open access.

B:

“Wireless authentication and security posture authorization solve different access-control requirements” responds to another technical or business failure: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. That source case depends on: Wireless authentication and security posture authorization solve different access-control requirements. The present issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The more direct action is “Enterprise WLAN admission can use centralized identity authorization rather than shared open access” because Enterprise WLAN admission can use centralized identity authorization rather than shared open access.

C:

“WLAN roaming outcomes depend on consistent client network mapping and mobility design” responds to another technical or business failure: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. That source case depends on: WLAN roaming outcomes depend on consistent client network mapping and mobility design. The present issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The more direct action is “Enterprise WLAN admission can use centralized identity authorization rather than shared open access” because Enterprise WLAN admission can use centralized identity authorization rather than shared open access.

Question 106

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing controller-managed enterprise WLAN during a supervised route change (HCIP-H12-821-WLAN-027). The observed network issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. Which next engineering action best addresses the reported problem?

  1. Correct supported AC discovery and CAPWAP reachability for the AP management segment.
  2. Troubleshoot AP-to-AC control reachability, certificates and supported software compatibility.
  3. Design WLAN VLAN pooling and appropriately sized DHCP scopes for the intended client population.
  4. Configure a supported 802.1X and RADIUS authentication policy and validate appropriate encryption.

Explanation

Correct Answer

D:

The directly responsive action is: Configure a supported 802.1X and RADIUS authentication policy and validate appropriate encryption. The specific reported fault is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. Confirmation should show: Authorized identities connect to the WLAN while invalid credentials are denied. The supporting technical principle is: Enterprise WLAN admission can use centralized identity authorization rather than shared open access.

Incorrect Answers

A:

“Correct supported AC discovery and CAPWAP reachability for the AP management segment” responds to another technical or business failure: A large Huawei WLAN has many access points but a new AP cannot register because it discovers the wrong wireless controller. That source case depends on: Centrally managed WLAN APs depend on controller discovery and CAPWAP control connectivity. The present issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The more direct action is “Configure a supported 802.1X and RADIUS authentication policy and validate appropriate encryption” because Enterprise WLAN admission can use centralized identity authorization rather than shared open access.

B:

“Troubleshoot AP-to-AC control reachability, certificates and supported software compatibility” responds to another technical or business failure: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. That source case depends on: WLAN centralized management requires a healthy control channel independent of user radio frames. The present issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The more direct action is “Configure a supported 802.1X and RADIUS authentication policy and validate appropriate encryption” because Enterprise WLAN admission can use centralized identity authorization rather than shared open access.

C:

“Design WLAN VLAN pooling and appropriately sized DHCP scopes for the intended client population” responds to another technical or business failure: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. That source case depends on: VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments. The present issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The more direct action is “Configure a supported 802.1X and RADIUS authentication policy and validate appropriate encryption” because Enterprise WLAN admission can use centralized identity authorization rather than shared open access.

Question 107

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing controller-managed enterprise WLAN during a supervised route change (HCIP-H12-821-WLAN-027). The observed network issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. Which ongoing preventive or detective control would best reduce recurrence?

  1. Test same-SSID roaming across all intended coverage and VLAN boundaries.
  2. Test positive and negative 802.1X authentication during SSID commissioning.
  3. Verify controller discovery and reachability for each new AP subnet.
  4. Verify RF design through client roaming tests in dense locations.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Test positive and negative 802.1X authentication during SSID commissioning. This directly addresses the recurring fault: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The corrective action would be: Configure a supported 802.1X and RADIUS authentication policy and validate appropriate encryption. Success is demonstrated when: Authorized identities connect to the WLAN while invalid credentials are denied.

Incorrect Answers

A:

“Test same-SSID roaming across all intended coverage and VLAN boundaries” addresses recurrence of another problem: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. That problem depends on: The preventive or detective safeguard is: Test same-SSID roaming across all intended coverage and VLAN boundaries. The recurring risk here is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The more targeted safeguard is “Test positive and negative 802.1X authentication during SSID commissioning” because the preventive or detective safeguard is: Test positive and negative 802.1X authentication during SSID commissioning.

C:

“Verify controller discovery and reachability for each new AP subnet” addresses recurrence of another problem: A large Huawei WLAN has many access points but a new AP cannot register because it discovers the wrong wireless controller. That problem depends on: The preventive or detective safeguard is: Verify controller discovery and reachability for each new AP subnet. The recurring risk here is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The more targeted safeguard is “Test positive and negative 802.1X authentication during SSID commissioning” because the preventive or detective safeguard is: Test positive and negative 802.1X authentication during SSID commissioning.

D:

“Verify RF design through client roaming tests in dense locations” addresses recurrence of another problem: A Wi-Fi deployment applies identical power levels in a dense conference center and clients roam unpredictably to distant APs. That problem depends on: The preventive or detective safeguard is: Verify RF design through client roaming tests in dense locations. The recurring risk here is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The more targeted safeguard is “Test positive and negative 802.1X authentication during SSID commissioning” because the preventive or detective safeguard is: Test positive and negative 802.1X authentication during SSID commissioning.

Question 108

At fictional Elmstone Transit, a network engineer supporting operations terminals is reviewing controller-managed enterprise WLAN during a supervised route change (HCIP-H12-821-WLAN-027). The observed network issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. Which observation most directly verifies that the corrective change succeeded?

  1. Representative roaming clients sustain usable throughput with reduced interference.
  2. The specified APs advertise only the approved SSIDs and map users to intended services.
  3. Authorized identities connect to the WLAN while invalid credentials are denied.
  4. Roaming clients retain suitable network continuity or follow documented subnet mobility behavior.

Explanation

Correct Answer

C:

The best verification observation is: Authorized identities connect to the WLAN while invalid credentials are denied. It demonstrates the corrective action: Configure a supported 802.1X and RADIUS authentication policy and validate appropriate encryption. This fits the principle: Enterprise WLAN admission can use centralized identity authorization rather than shared open access. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Representative roaming clients sustain usable throughput with reduced interference” responds to another technical or business failure: A large warehouse WLAN appears healthy but clients disconnect during a channel change because radios suffer co-channel congestion. That source case depends on: The best verification observation is: Representative roaming clients sustain usable throughput with reduced interference. The present issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The more direct action is “Authorized identities connect to the WLAN while invalid credentials are denied” because the best verification observation is: Authorized identities connect to the WLAN while invalid credentials are denied.

B:

“The specified APs advertise only the approved SSIDs and map users to intended services” responds to another technical or business failure: An AC service template is correct but an AP group still advertises an old SSID due to an unbound or wrong profile. That source case depends on: The best verification observation is: The specified APs advertise only the approved SSIDs and map users to intended services. The present issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The more direct action is “Authorized identities connect to the WLAN while invalid credentials are denied” because the best verification observation is: Authorized identities connect to the WLAN while invalid credentials are denied.

D:

“Roaming clients retain suitable network continuity or follow documented subnet mobility behavior” responds to another technical or business failure: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. That source case depends on: The best verification observation is: Roaming clients retain suitable network continuity or follow documented subnet mobility behavior. The present issue is: An SSID uses open authentication despite organizational requirements for enterprise identity verification. The more direct action is “Authorized identities connect to the WLAN while invalid credentials are denied” because the best verification observation is: Authorized identities connect to the WLAN while invalid credentials are denied.

Question 109

At fictional Oakridge Energy, a network engineer supporting field substations is reviewing IS-IS level-aware topology and database synchronization during an initial deployment test (HCIP-H12-821-ISIS-028). The observed network issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. Which ongoing preventive or detective control would best reduce recurrence?

  1. Test IS-IS PDU forwarding over new Ethernet interconnects.
  2. Validate system IDs across a network before enabling IS-IS.
  3. Audit attached-bit and border-exit policies in dual-homed areas.
  4. Compare circuit-type values during core link acceptance.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Audit attached-bit and border-exit policies in dual-homed areas. This directly addresses the recurring fault: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The corrective action would be: Examine the L1/L2 router's attached-state behavior and desired inter-area default routing. Success is demonstrated when: Access routers select the documented exit and no longer follow an accidental preferred attachment.

Incorrect Answers

A:

“Test IS-IS PDU forwarding over new Ethernet interconnects” addresses recurrence of another problem: IS-IS adjacency remains Down when Hello frames are filtered by an intermediate layer-2 device. That problem depends on: The preventive or detective safeguard is: Test IS-IS PDU forwarding over new Ethernet interconnects. The recurring risk here is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more targeted safeguard is “Audit attached-bit and border-exit policies in dual-homed areas” because the preventive or detective safeguard is: Audit attached-bit and border-exit policies in dual-homed areas.

B:

“Validate system IDs across a network before enabling IS-IS” addresses recurrence of another problem: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. That problem depends on: The preventive or detective safeguard is: Validate system IDs across a network before enabling IS-IS. The recurring risk here is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more targeted safeguard is “Audit attached-bit and border-exit policies in dual-homed areas” because the preventive or detective safeguard is: Audit attached-bit and border-exit policies in dual-homed areas.

D:

“Compare circuit-type values during core link acceptance” addresses recurrence of another problem: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. That problem depends on: The preventive or detective safeguard is: Compare circuit-type values during core link acceptance. The recurring risk here is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more targeted safeguard is “Audit attached-bit and border-exit policies in dual-homed areas” because the preventive or detective safeguard is: Audit attached-bit and border-exit policies in dual-homed areas.

Question 110

At fictional Oakridge Energy, a network engineer supporting field substations is reviewing IS-IS level-aware topology and database synchronization during an initial deployment test (HCIP-H12-821-ISIS-028). The observed network issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. Which observation most directly verifies that the corrective change succeeded?

  1. Neighbor Hellos are received and the intended adjacency reaches Up.
  2. The elected DIS originates the expected pseudonode and other routers form correct LAN adjacencies.
  3. Adjacent routers converge on consistent current LSP contents and route tables.
  4. Access routers select the documented exit and no longer follow an accidental preferred attachment.

Explanation

Correct Answer

D:

The best verification observation is: Access routers select the documented exit and no longer follow an accidental preferred attachment. It demonstrates the corrective action: Examine the L1/L2 router's attached-state behavior and desired inter-area default routing. This fits the principle: IS-IS attached-bit behavior can influence Level 1 routing toward other areas. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Neighbor Hellos are received and the intended adjacency reaches Up” responds to another technical or business failure: IS-IS adjacency remains Down when Hello frames are filtered by an intermediate layer-2 device. That source case depends on: The best verification observation is: Neighbor Hellos are received and the intended adjacency reaches Up. The present issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more direct action is “Access routers select the documented exit and no longer follow an accidental preferred attachment” because the best verification observation is: Access routers select the documented exit and no longer follow an accidental preferred attachment.

B:

“The elected DIS originates the expected pseudonode and other routers form correct LAN adjacencies” responds to another technical or business failure: An IS-IS router is elected designated intermediate system on an Ethernet segment but an engineer calls it an OSPF DR. That source case depends on: The best verification observation is: The elected DIS originates the expected pseudonode and other routers form correct LAN adjacencies. The present issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more direct action is “Access routers select the documented exit and no longer follow an accidental preferred attachment” because the best verification observation is: Access routers select the documented exit and no longer follow an accidental preferred attachment.

C:

“Adjacent routers converge on consistent current LSP contents and route tables” responds to another technical or business failure: An IS-IS area contains conflicting LSP versions after connectivity flaps and routers disagree about routes. That source case depends on: The best verification observation is: Adjacent routers converge on consistent current LSP contents and route tables. The present issue is: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. The more direct action is “Access routers select the documented exit and no longer follow an accidental preferred attachment” because the best verification observation is: Access routers select the documented exit and no longer follow an accidental preferred attachment.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests