McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 31

Question 300

At fictional Willow Transportation, a network engineer supporting fleet operations is reviewing RSTP, MSTP and switching interconnects during a production cutover (HCIP-H12-821-SWITCH-075). The observed network issue is: An iStack link fails and an engineer assumes the remaining members will always preserve a single partition-free control plane. Which routing, switching, or network principle best explains the appropriate solution?

  1. Stack resiliency requires deliberate master election and partition handling.
  2. MSTP permits multiple VLANs to share explicitly defined spanning-tree instances.
  3. Spanning-tree selected paths depend on cumulative root cost and bridge identifiers.
  4. VLAN trunking requires explicit compatible tagging and allowed membership.

Explanation

Correct Answer

A:

The governing principle is: Stack resiliency requires deliberate master election and partition handling. In this scenario, the appropriate action is: Check split-brain prevention mechanisms and stack topology supported by the platform. Valid evidence would show: The remaining stack behaves predictably and avoids simultaneous unauthorized active masters.

Incorrect Answers

B:

“MSTP permits multiple VLANs to share explicitly defined spanning-tree instances” responds to another technical or business failure: A network requires multiple spanning-tree topologies but maps all VLANs into one MST instance. That source case depends on: MSTP permits multiple VLANs to share explicitly defined spanning-tree instances. The present issue is: An iStack link fails and an engineer assumes the remaining members will always preserve a single partition-free control plane. The more direct action is “Stack resiliency requires deliberate master election and partition handling” because Stack resiliency requires deliberate master election and partition handling.

C:

“Spanning-tree selected paths depend on cumulative root cost and bridge identifiers” responds to another technical or business failure: A switch link that should be an MST root port instead alternates forwarding because path costs differ from the planned design. That source case depends on: Spanning-tree selected paths depend on cumulative root cost and bridge identifiers. The present issue is: An iStack link fails and an engineer assumes the remaining members will always preserve a single partition-free control plane. The more direct action is “Stack resiliency requires deliberate master election and partition handling” because Stack resiliency requires deliberate master election and partition handling.

D:

“VLAN trunking requires explicit compatible tagging and allowed membership” responds to another technical or business failure: A technician adds a new VLAN but leaves it out of the allowed trunk list between access and aggregation switches. That source case depends on: VLAN trunking requires explicit compatible tagging and allowed membership. The present issue is: An iStack link fails and an engineer assumes the remaining members will always preserve a single partition-free control plane. The more direct action is “Stack resiliency requires deliberate master election and partition handling” because Stack resiliency requires deliberate master election and partition handling.

Question 301

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing controller-managed enterprise WLAN during a customer network audit (HCIP-H12-821-WLAN-076). The observed network issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. Which next engineering action best addresses the reported problem?

  1. Integrate supported WLAN access control or NAC posture policy with identity decisions.
  2. Align approved SSID-to-VLAN and roaming architecture across relevant AP groups.
  3. Correct supported AC discovery and CAPWAP reachability for the AP management segment.
  4. Configure a supported 802.1X and RADIUS authentication policy and validate appropriate encryption.

Explanation

Correct Answer

B:

The directly responsive action is: Align approved SSID-to-VLAN and roaming architecture across relevant AP groups. The specific reported fault is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. Confirmation should show: Roaming clients retain suitable network continuity or follow documented subnet mobility behavior. The supporting technical principle is: WLAN roaming outcomes depend on consistent client network mapping and mobility design.

Incorrect Answers

A:

“Integrate supported WLAN access control or NAC posture policy with identity decisions” responds to another technical or business failure: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. That source case depends on: Wireless authentication and security posture authorization solve different access-control requirements. The present issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The more direct action is “Align approved SSID-to-VLAN and roaming architecture across relevant AP groups” because WLAN roaming outcomes depend on consistent client network mapping and mobility design.

C:

“Correct supported AC discovery and CAPWAP reachability for the AP management segment” responds to another technical or business failure: A large Huawei WLAN has many access points but a new AP cannot register because it discovers the wrong wireless controller. That source case depends on: Centrally managed WLAN APs depend on controller discovery and CAPWAP control connectivity. The present issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The more direct action is “Align approved SSID-to-VLAN and roaming architecture across relevant AP groups” because WLAN roaming outcomes depend on consistent client network mapping and mobility design.

D:

“Configure a supported 802.1X and RADIUS authentication policy and validate appropriate encryption” responds to another technical or business failure: An SSID uses open authentication despite organizational requirements for enterprise identity verification. That source case depends on: Enterprise WLAN admission can use centralized identity authorization rather than shared open access. The present issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The more direct action is “Align approved SSID-to-VLAN and roaming architecture across relevant AP groups” because WLAN roaming outcomes depend on consistent client network mapping and mobility design.

Question 302

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing controller-managed enterprise WLAN during a customer network audit (HCIP-H12-821-WLAN-076). The observed network issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. Which routing, switching, or network principle best explains the appropriate solution?

  1. WLAN radio cell size influences roaming decisions and co-channel interference.
  2. Wireless authentication and security posture authorization solve different access-control requirements.
  3. Centrally managed WLAN APs depend on controller discovery and CAPWAP control connectivity.
  4. WLAN roaming outcomes depend on consistent client network mapping and mobility design.

Explanation

Correct Answer

D:

The governing principle is: WLAN roaming outcomes depend on consistent client network mapping and mobility design. In this scenario, the appropriate action is: Align approved SSID-to-VLAN and roaming architecture across relevant AP groups. Valid evidence would show: Roaming clients retain suitable network continuity or follow documented subnet mobility behavior.

Incorrect Answers

A:

“WLAN radio cell size influences roaming decisions and co-channel interference” responds to another technical or business failure: A Wi-Fi deployment applies identical power levels in a dense conference center and clients roam unpredictably to distant APs. That source case depends on: WLAN radio cell size influences roaming decisions and co-channel interference. The present issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The more direct action is “WLAN roaming outcomes depend on consistent client network mapping and mobility design” because WLAN roaming outcomes depend on consistent client network mapping and mobility design.

B:

“Wireless authentication and security posture authorization solve different access-control requirements” responds to another technical or business failure: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. That source case depends on: Wireless authentication and security posture authorization solve different access-control requirements. The present issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The more direct action is “WLAN roaming outcomes depend on consistent client network mapping and mobility design” because WLAN roaming outcomes depend on consistent client network mapping and mobility design.

C:

“Centrally managed WLAN APs depend on controller discovery and CAPWAP control connectivity” responds to another technical or business failure: A large Huawei WLAN has many access points but a new AP cannot register because it discovers the wrong wireless controller. That source case depends on: Centrally managed WLAN APs depend on controller discovery and CAPWAP control connectivity. The present issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The more direct action is “WLAN roaming outcomes depend on consistent client network mapping and mobility design” because WLAN roaming outcomes depend on consistent client network mapping and mobility design.

Question 303

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing controller-managed enterprise WLAN during a customer network audit (HCIP-H12-821-WLAN-076). The observed network issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. Which ongoing preventive or detective control would best reduce recurrence?

  1. Verify controller discovery and reachability for each new AP subnet.
  2. Verify RF design through client roaming tests in dense locations.
  3. Test same-SSID roaming across all intended coverage and VLAN boundaries.
  4. Forecast client concurrency and pool utilization before large events.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Test same-SSID roaming across all intended coverage and VLAN boundaries. This directly addresses the recurring fault: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The corrective action would be: Align approved SSID-to-VLAN and roaming architecture across relevant AP groups. Success is demonstrated when: Roaming clients retain suitable network continuity or follow documented subnet mobility behavior.

Incorrect Answers

A:

“Verify controller discovery and reachability for each new AP subnet” addresses recurrence of another problem: A large Huawei WLAN has many access points but a new AP cannot register because it discovers the wrong wireless controller. That problem depends on: The preventive or detective safeguard is: Verify controller discovery and reachability for each new AP subnet. The recurring risk here is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The more targeted safeguard is “Test same-SSID roaming across all intended coverage and VLAN boundaries” because the preventive or detective safeguard is: Test same-SSID roaming across all intended coverage and VLAN boundaries.

B:

“Verify RF design through client roaming tests in dense locations” addresses recurrence of another problem: A Wi-Fi deployment applies identical power levels in a dense conference center and clients roam unpredictably to distant APs. That problem depends on: The preventive or detective safeguard is: Verify RF design through client roaming tests in dense locations. The recurring risk here is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The more targeted safeguard is “Test same-SSID roaming across all intended coverage and VLAN boundaries” because the preventive or detective safeguard is: Test same-SSID roaming across all intended coverage and VLAN boundaries.

D:

“Forecast client concurrency and pool utilization before large events” addresses recurrence of another problem: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. That problem depends on: The preventive or detective safeguard is: Forecast client concurrency and pool utilization before large events. The recurring risk here is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The more targeted safeguard is “Test same-SSID roaming across all intended coverage and VLAN boundaries” because the preventive or detective safeguard is: Test same-SSID roaming across all intended coverage and VLAN boundaries.

Question 304

At fictional Lakeshore Finance, a network engineer supporting transaction systems is reviewing controller-managed enterprise WLAN during a customer network audit (HCIP-H12-821-WLAN-076). The observed network issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. Which observation most directly verifies that the corrective change succeeded?

  1. The AP establishes its authorized controller session and downloads the intended configuration.
  2. APs recover onto the intended backup AC and approved SSIDs resume service.
  3. Roaming clients retain suitable network continuity or follow documented subnet mobility behavior.
  4. New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits.

Explanation

Correct Answer

C:

The best verification observation is: Roaming clients retain suitable network continuity or follow documented subnet mobility behavior. It demonstrates the corrective action: Align approved SSID-to-VLAN and roaming architecture across relevant AP groups. This fits the principle: WLAN roaming outcomes depend on consistent client network mapping and mobility design. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The AP establishes its authorized controller session and downloads the intended configuration” responds to another technical or business failure: A large Huawei WLAN has many access points but a new AP cannot register because it discovers the wrong wireless controller. That source case depends on: The best verification observation is: The AP establishes its authorized controller session and downloads the intended configuration. The present issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The more direct action is “Roaming clients retain suitable network continuity or follow documented subnet mobility behavior” because the best verification observation is: Roaming clients retain suitable network continuity or follow documented subnet mobility behavior.

B:

“APs recover onto the intended backup AC and approved SSIDs resume service” responds to another technical or business failure: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. That source case depends on: The best verification observation is: APs recover onto the intended backup AC and approved SSIDs resume service. The present issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The more direct action is “Roaming clients retain suitable network continuity or follow documented subnet mobility behavior” because the best verification observation is: Roaming clients retain suitable network continuity or follow documented subnet mobility behavior.

D:

“New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits” responds to another technical or business failure: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. That source case depends on: The best verification observation is: New clients receive valid addresses across the planned pool without exceeding broadcast-domain limits. The present issue is: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. The more direct action is “Roaming clients retain suitable network continuity or follow documented subnet mobility behavior” because the best verification observation is: Roaming clients retain suitable network continuity or follow documented subnet mobility behavior.

Question 305

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing BGP routing, path attributes and EVPN exchange during a baseline compliance test (HCIP-H12-821-BGP-077). The observed network issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. Which next engineering action best addresses the reported problem?

  1. Choose the correct EVPN route type for IP prefix routing versus bridged endpoint MAC reachability.
  2. Differentiate retained alternatives, chosen best path and supported multipath forwarding configuration.
  3. Verify RR cluster design and use appropriate cluster IDs for intentional reflection domains.
  4. Review MED comparison scope and any explicit policy for peers from different autonomous systems.

Explanation

Correct Answer

C:

The directly responsive action is: Verify RR cluster design and use appropriate cluster IDs for intentional reflection domains. The specific reported fault is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. Confirmation should show: Reflected updates carry expected cluster-list information without false loop rejection. The supporting technical principle is: BGP route reflectors use cluster-list attributes to detect reflection loops.

Incorrect Answers

A:

“Choose the correct EVPN route type for IP prefix routing versus bridged endpoint MAC reachability” responds to another technical or business failure: An engineer expects BGP EVPN Type 5 IP prefixes to replace all MAC learning requirements for a layer-2 stretch. That source case depends on: EVPN route types distinguish IP-prefix advertisement from MAC/IP advertisement. The present issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The more direct action is “Verify RR cluster design and use appropriate cluster IDs for intentional reflection domains” because BGP route reflectors use cluster-list attributes to detect reflection loops.

B:

“Differentiate retained alternatives, chosen best path and supported multipath forwarding configuration” responds to another technical or business failure: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. That source case depends on: BGP can retain multiple paths while installing selected forwarding entries under platform rules. The present issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The more direct action is “Verify RR cluster design and use appropriate cluster IDs for intentional reflection domains” because BGP route reflectors use cluster-list attributes to detect reflection loops.

D:

“Review MED comparison scope and any explicit policy for peers from different autonomous systems” responds to another technical or business failure: A multi-exit BGP neighbor advertises a preferred MED but the local router compares routes from unrelated upstream ASes incorrectly. That source case depends on: MED can influence entry choice but default comparisons and import policy constrain its use. The present issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The more direct action is “Verify RR cluster design and use appropriate cluster IDs for intentional reflection domains” because BGP route reflectors use cluster-list attributes to detect reflection loops.

Question 306

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing BGP routing, path attributes and EVPN exchange during a baseline compliance test (HCIP-H12-821-BGP-077). The observed network issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. Which ongoing preventive or detective control would best reduce recurrence?

  1. Review VNI and RT mapping before changing underlay topology.
  2. Record the relevant best-path comparison attributes in route-change reviews.
  3. Document RR cluster IDs and compare them during dual-reflector deployment.
  4. Inspect originator and cluster-list fields when route reflection drops paths.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Document RR cluster IDs and compare them during dual-reflector deployment. This directly addresses the recurring fault: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The corrective action would be: Verify RR cluster design and use appropriate cluster IDs for intentional reflection domains. Success is demonstrated when: Reflected updates carry expected cluster-list information without false loop rejection.

Incorrect Answers

A:

“Review VNI and RT mapping before changing underlay topology” addresses recurrence of another problem: A fabric advertises a host MAC under the wrong VNI and an engineer changes the global underlay OSPF cost to compensate. That problem depends on: The preventive or detective safeguard is: Review VNI and RT mapping before changing underlay topology. The recurring risk here is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The more targeted safeguard is “Document RR cluster IDs and compare them during dual-reflector deployment” because the preventive or detective safeguard is: Document RR cluster IDs and compare them during dual-reflector deployment.

B:

“Record the relevant best-path comparison attributes in route-change reviews” addresses recurrence of another problem: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. That problem depends on: The preventive or detective safeguard is: Record the relevant best-path comparison attributes in route-change reviews. The recurring risk here is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The more targeted safeguard is “Document RR cluster IDs and compare them during dual-reflector deployment” because the preventive or detective safeguard is: Document RR cluster IDs and compare them during dual-reflector deployment.

D:

“Inspect originator and cluster-list fields when route reflection drops paths” addresses recurrence of another problem: A route reflector receives an update whose ORIGINATOR_ID equals its own router identifier and a technician wants to override the loop check. That problem depends on: The preventive or detective safeguard is: Inspect originator and cluster-list fields when route reflection drops paths. The recurring risk here is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The more targeted safeguard is “Document RR cluster IDs and compare them during dual-reflector deployment” because the preventive or detective safeguard is: Document RR cluster IDs and compare them during dual-reflector deployment.

Question 307

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing BGP routing, path attributes and EVPN exchange during a baseline compliance test (HCIP-H12-821-BGP-077). The observed network issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. Which observation most directly verifies that the corrective change succeeded?

  1. The multihop eBGP session reaches Established while the control path follows approved routing.
  2. External observed routes show the intended prepending while any remaining policy preference is explained.
  3. Reflected updates carry expected cluster-list information without false loop rejection.
  4. Both routers reach Established using the planned loopback source and destination.

Explanation

Correct Answer

C:

The best verification observation is: Reflected updates carry expected cluster-list information without false loop rejection. It demonstrates the corrective action: Verify RR cluster design and use appropriate cluster IDs for intentional reflection domains. This fits the principle: BGP route reflectors use cluster-list attributes to detect reflection loops. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The multihop eBGP session reaches Established while the control path follows approved routing” responds to another technical or business failure: Two eBGP routers attempt to peer over loopback addresses separated by several transit hops using the default one-hop behavior. That source case depends on: The best verification observation is: The multihop eBGP session reaches Established while the control path follows approved routing. The present issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The more direct action is “Reflected updates carry expected cluster-list information without false loop rejection” because the best verification observation is: Reflected updates carry expected cluster-list information without false loop rejection.

B:

“External observed routes show the intended prepending while any remaining policy preference is explained” responds to another technical or business failure: A company prepends its AS several times to influence inbound traffic but sees no change at a remote network. That source case depends on: The best verification observation is: External observed routes show the intended prepending while any remaining policy preference is explained. The present issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The more direct action is “Reflected updates carry expected cluster-list information without false loop rejection” because the best verification observation is: Reflected updates carry expected cluster-list information without false loop rejection.

D:

“Both routers reach Established using the planned loopback source and destination” responds to another technical or business failure: An iBGP adjacency to peer loopbacks fails because one side sends TCP from the physical interface address. That source case depends on: The best verification observation is: Both routers reach Established using the planned loopback source and destination. The present issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The more direct action is “Reflected updates carry expected cluster-list information without false loop rejection” because the best verification observation is: Reflected updates carry expected cluster-list information without false loop rejection.

Question 308

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing BGP routing, path attributes and EVPN exchange during a baseline compliance test (HCIP-H12-821-BGP-077). The observed network issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. Which routing, switching, or network principle best explains the appropriate solution?

  1. BGP aggregation must be consistent with actual routed component reachability.
  2. BGP can retain multiple paths while installing selected forwarding entries under platform rules.
  3. BGP route reflectors use cluster-list attributes to detect reflection loops.
  4. BGP LOCAL_PREF is normally local to an AS and is not sent to eBGP neighbors.

Explanation

Correct Answer

C:

The governing principle is: BGP route reflectors use cluster-list attributes to detect reflection loops. In this scenario, the appropriate action is: Verify RR cluster design and use appropriate cluster IDs for intentional reflection domains. Valid evidence would show: Reflected updates carry expected cluster-list information without false loop rejection.

Incorrect Answers

A:

“BGP aggregation must be consistent with actual routed component reachability” responds to another technical or business failure: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. That source case depends on: BGP aggregation must be consistent with actual routed component reachability. The present issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The more direct action is “BGP route reflectors use cluster-list attributes to detect reflection loops” because BGP route reflectors use cluster-list attributes to detect reflection loops.

B:

“BGP can retain multiple paths while installing selected forwarding entries under platform rules” responds to another technical or business failure: A BGP router receives multiple paths and engineering assumes all alternate paths must be installed for forwarding regardless of BGP capability. That source case depends on: BGP can retain multiple paths while installing selected forwarding entries under platform rules. The present issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The more direct action is “BGP route reflectors use cluster-list attributes to detect reflection loops” because BGP route reflectors use cluster-list attributes to detect reflection loops.

D:

“BGP LOCAL_PREF is normally local to an AS and is not sent to eBGP neighbors” responds to another technical or business failure: An edge router tries to influence its upstream provider's path selection by assigning LOCAL_PREF on an eBGP announcement. That source case depends on: BGP LOCAL_PREF is normally local to an AS and is not sent to eBGP neighbors. The present issue is: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. The more direct action is “BGP route reflectors use cluster-list attributes to detect reflection loops” because BGP route reflectors use cluster-list attributes to detect reflection loops.

Question 309

At fictional Zenith Cloudworks, a network engineer supporting data center interconnects is reviewing OSPF area design and link-state convergence during a lab-to-production acceptance (HCIP-H12-821-OSPF-078). The observed network issue is: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. Which routing, switching, or network principle best explains the appropriate solution?

  1. OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss.
  2. NSSA and stub areas have different support for originating external routes.
  3. OSPF routing exchanges depend on matched authentication parameters when authentication is enabled.
  4. OSPF external aggregation occurs at the appropriate redistribution boundary.

Explanation

Correct Answer

A:

The governing principle is: OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss. In this scenario, the appropriate action is: Analyze Hello loss, Dead timers, interfaces errors and broadcast congestion rather than changing router IDs. Valid evidence would show: Adjacency stays stable after underlying packet loss or timer sensitivity is corrected.

Incorrect Answers

B:

“NSSA and stub areas have different support for originating external routes” responds to another technical or business failure: An engineer designates an OSPF NSSA as a stub to reduce LSAs but unintentionally removes local redistribution. That source case depends on: NSSA and stub areas have different support for originating external routes. The present issue is: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. The more direct action is “OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss” because OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss.

C:

“OSPF routing exchanges depend on matched authentication parameters when authentication is enabled” responds to another technical or business failure: An OSPF adjacency repeatedly fails due to mismatched authentication algorithms after a maintenance window. That source case depends on: OSPF routing exchanges depend on matched authentication parameters when authentication is enabled. The present issue is: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. The more direct action is “OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss” because OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss.

D:

“OSPF external aggregation occurs at the appropriate redistribution boundary” responds to another technical or business failure: An ASBR advertising multiple external subnets floods excessive details because external route aggregation was never applied. That source case depends on: OSPF external aggregation occurs at the appropriate redistribution boundary. The present issue is: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. The more direct action is “OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss” because OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss.

Question 310

At fictional Zenith Cloudworks, a network engineer supporting data center interconnects is reviewing OSPF area design and link-state convergence during a lab-to-production acceptance (HCIP-H12-821-OSPF-078). The observed network issue is: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. Which next engineering action best addresses the reported problem?

  1. Compare interface IP addresses with enabled OSPF network ranges and area bindings.
  2. Analyze Hello loss, Dead timers, interfaces errors and broadcast congestion rather than changing router IDs.
  3. Configure appropriate ASBR external route summarization while preserving necessary exceptions.
  4. Restore an appropriate area 0 connection or review a supported planned virtual-link design.

Explanation

Correct Answer

B:

The directly responsive action is: Analyze Hello loss, Dead timers, interfaces errors and broadcast congestion rather than changing router IDs. The specific reported fault is: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. Confirmation should show: Adjacency stays stable after underlying packet loss or timer sensitivity is corrected. The supporting technical principle is: OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss.

Incorrect Answers

A:

“Compare interface IP addresses with enabled OSPF network ranges and area bindings” responds to another technical or business failure: OSPF adjacency is stable but a route to a target subnet is absent due to network-statement matching mistakes. That source case depends on: OSPF process activation on interfaces depends on matching enabled prefixes and area configuration. The present issue is: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. The more direct action is “Analyze Hello loss, Dead timers, interfaces errors and broadcast congestion rather than changing router IDs” because OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss.

C:

“Configure appropriate ASBR external route summarization while preserving necessary exceptions” responds to another technical or business failure: An ASBR advertising multiple external subnets floods excessive details because external route aggregation was never applied. That source case depends on: OSPF external aggregation occurs at the appropriate redistribution boundary. The present issue is: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. The more direct action is “Analyze Hello loss, Dead timers, interfaces errors and broadcast congestion rather than changing router IDs” because OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss.

D:

“Restore an appropriate area 0 connection or review a supported planned virtual-link design” responds to another technical or business failure: A branch area has no direct backbone connectivity and operators try to exchange routes between nonbackbone areas directly. That source case depends on: OSPF inter-area routing depends on a contiguous logical backbone architecture. The present issue is: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. The more direct action is “Analyze Hello loss, Dead timers, interfaces errors and broadcast congestion rather than changing router IDs” because OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests