McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 29

Question 280

At fictional Quayside Education, a network engineer supporting learning sites is reviewing IGMP and PIM multicast distribution during a planned network scaling change (HCIP-H12-821-MULTICAST-070). The observed network issue is: A source-specific multicast receiver attempts to use an any-source RP tree even though the deployment expects a specified source. Which observation most directly verifies that the corrective change succeeded?

  1. The correct incoming interface and expected outgoing interface list are installed end to end.
  2. Receivers build valid PIM-SM join state toward the intended rendezvous point.
  3. Only the requested source-group stream is delivered without RP-based ambiguity.
  4. Packets arrive on the expected RPF interface and are forwarded downstream.

Explanation

Correct Answer

C:

The best verification observation is: Only the requested source-group stream is delivered without RP-based ambiguity. It demonstrates the corrective action: Configure compatible IGMPv3 source filters and source-specific PIM behavior. This fits the principle: SSM receivers identify the source and group and avoid general ASM RP discovery. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The correct incoming interface and expected outgoing interface list are installed end to end” responds to another technical or business failure: An engineer diagnoses multicast stream loss by checking only source packets and ignores outgoing interface list and receiver state. That source case depends on: The best verification observation is: The correct incoming interface and expected outgoing interface list are installed end to end. The present issue is: A source-specific multicast receiver attempts to use an any-source RP tree even though the deployment expects a specified source. The more direct action is “Only the requested source-group stream is delivered without RP-based ambiguity” because the best verification observation is: Only the requested source-group stream is delivered without RP-based ambiguity.

B:

“Receivers build valid PIM-SM join state toward the intended rendezvous point” responds to another technical or business failure: A PIM sparse-mode receiver joins a group but no rendezvous point is reachable in the intended PIM domain. That source case depends on: The best verification observation is: Receivers build valid PIM-SM join state toward the intended rendezvous point. The present issue is: A source-specific multicast receiver attempts to use an any-source RP tree even though the deployment expects a specified source. The more direct action is “Only the requested source-group stream is delivered without RP-based ambiguity” because the best verification observation is: Only the requested source-group stream is delivered without RP-based ambiguity.

D:

“Packets arrive on the expected RPF interface and are forwarded downstream” responds to another technical or business failure: A multicast forwarding entry receives traffic from a source on the wrong interface and drops it. That source case depends on: The best verification observation is: Packets arrive on the expected RPF interface and are forwarded downstream. The present issue is: A source-specific multicast receiver attempts to use an any-source RP tree even though the deployment expects a specified source. The more direct action is “Only the requested source-group stream is delivered without RP-based ambiguity” because the best verification observation is: Only the requested source-group stream is delivered without RP-based ambiguity.

Question 281

At fictional Alder Community, a network engineer supporting regional administration is reviewing controller-managed enterprise WLAN during an intersite service activation (HCIP-H12-821-WLAN-071). The observed network issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. Which ongoing preventive or detective control would best reduce recurrence?

  1. Rehearse controller loss with representative APs and client traffic.
  2. Verify RF design through client roaming tests in dense locations.
  3. Test positive and negative 802.1X authentication during SSID commissioning.
  4. Monitor CAPWAP session stability after switching or ACL changes.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Monitor CAPWAP session stability after switching or ACL changes. This directly addresses the recurring fault: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The corrective action would be: Troubleshoot AP-to-AC control reachability, certificates and supported software compatibility. Success is demonstrated when: The AP maintains a stable CAPWAP session and adopts the approved service profile.

Incorrect Answers

A:

“Rehearse controller loss with representative APs and client traffic” addresses recurrence of another problem: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. That problem depends on: The preventive or detective safeguard is: Rehearse controller loss with representative APs and client traffic. The recurring risk here is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The more targeted safeguard is “Monitor CAPWAP session stability after switching or ACL changes” because the preventive or detective safeguard is: Monitor CAPWAP session stability after switching or ACL changes.

B:

“Verify RF design through client roaming tests in dense locations” addresses recurrence of another problem: A Wi-Fi deployment applies identical power levels in a dense conference center and clients roam unpredictably to distant APs. That problem depends on: The preventive or detective safeguard is: Verify RF design through client roaming tests in dense locations. The recurring risk here is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The more targeted safeguard is “Monitor CAPWAP session stability after switching or ACL changes” because the preventive or detective safeguard is: Monitor CAPWAP session stability after switching or ACL changes.

C:

“Test positive and negative 802.1X authentication during SSID commissioning” addresses recurrence of another problem: An SSID uses open authentication despite organizational requirements for enterprise identity verification. That problem depends on: The preventive or detective safeguard is: Test positive and negative 802.1X authentication during SSID commissioning. The recurring risk here is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The more targeted safeguard is “Monitor CAPWAP session stability after switching or ACL changes” because the preventive or detective safeguard is: Monitor CAPWAP session stability after switching or ACL changes.

Question 282

At fictional Alder Community, a network engineer supporting regional administration is reviewing controller-managed enterprise WLAN during an intersite service activation (HCIP-H12-821-WLAN-071). The observed network issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. Which observation most directly verifies that the corrective change succeeded?

  1. APs recover onto the intended backup AC and approved SSIDs resume service.
  2. The AP maintains a stable CAPWAP session and adopts the approved service profile.
  3. Authorized identities connect to the WLAN while invalid credentials are denied.
  4. Roaming clients retain suitable network continuity or follow documented subnet mobility behavior.

Explanation

Correct Answer

B:

The best verification observation is: The AP maintains a stable CAPWAP session and adopts the approved service profile. It demonstrates the corrective action: Troubleshoot AP-to-AC control reachability, certificates and supported software compatibility. This fits the principle: WLAN centralized management requires a healthy control channel independent of user radio frames. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“APs recover onto the intended backup AC and approved SSIDs resume service” responds to another technical or business failure: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. That source case depends on: The best verification observation is: APs recover onto the intended backup AC and approved SSIDs resume service. The present issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The more direct action is “The AP maintains a stable CAPWAP session and adopts the approved service profile” because the best verification observation is: The AP maintains a stable CAPWAP session and adopts the approved service profile.

C:

“Authorized identities connect to the WLAN while invalid credentials are denied” responds to another technical or business failure: An SSID uses open authentication despite organizational requirements for enterprise identity verification. That source case depends on: The best verification observation is: Authorized identities connect to the WLAN while invalid credentials are denied. The present issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The more direct action is “The AP maintains a stable CAPWAP session and adopts the approved service profile” because the best verification observation is: The AP maintains a stable CAPWAP session and adopts the approved service profile.

D:

“Roaming clients retain suitable network continuity or follow documented subnet mobility behavior” responds to another technical or business failure: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. That source case depends on: The best verification observation is: Roaming clients retain suitable network continuity or follow documented subnet mobility behavior. The present issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The more direct action is “The AP maintains a stable CAPWAP session and adopts the approved service profile” because the best verification observation is: The AP maintains a stable CAPWAP session and adopts the approved service profile.

Question 283

At fictional Alder Community, a network engineer supporting regional administration is reviewing controller-managed enterprise WLAN during an intersite service activation (HCIP-H12-821-WLAN-071). The observed network issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. Which next engineering action best addresses the reported problem?

  1. Correct supported AC discovery and CAPWAP reachability for the AP management segment.
  2. Troubleshoot AP-to-AC control reachability, certificates and supported software compatibility.
  3. Design supported AC redundancy and AP failover behavior and verify its licensing and topology.
  4. Integrate supported WLAN access control or NAC posture policy with identity decisions.

Explanation

Correct Answer

B:

The directly responsive action is: Troubleshoot AP-to-AC control reachability, certificates and supported software compatibility. The specific reported fault is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. Confirmation should show: The AP maintains a stable CAPWAP session and adopts the approved service profile. The supporting technical principle is: WLAN centralized management requires a healthy control channel independent of user radio frames.

Incorrect Answers

A:

“Correct supported AC discovery and CAPWAP reachability for the AP management segment” responds to another technical or business failure: A large Huawei WLAN has many access points but a new AP cannot register because it discovers the wrong wireless controller. That source case depends on: Centrally managed WLAN APs depend on controller discovery and CAPWAP control connectivity. The present issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The more direct action is “Troubleshoot AP-to-AC control reachability, certificates and supported software compatibility” because WLAN centralized management requires a healthy control channel independent of user radio frames.

C:

“Design supported AC redundancy and AP failover behavior and verify its licensing and topology” responds to another technical or business failure: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. That source case depends on: Centralized WLAN control needs deliberate high availability and AP failover planning. The present issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The more direct action is “Troubleshoot AP-to-AC control reachability, certificates and supported software compatibility” because WLAN centralized management requires a healthy control channel independent of user radio frames.

D:

“Integrate supported WLAN access control or NAC posture policy with identity decisions” responds to another technical or business failure: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. That source case depends on: Wireless authentication and security posture authorization solve different access-control requirements. The present issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The more direct action is “Troubleshoot AP-to-AC control reachability, certificates and supported software compatibility” because WLAN centralized management requires a healthy control channel independent of user radio frames.

Question 284

At fictional Alder Community, a network engineer supporting regional administration is reviewing controller-managed enterprise WLAN during an intersite service activation (HCIP-H12-821-WLAN-071). The observed network issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. Which routing, switching, or network principle best explains the appropriate solution?

  1. Wireless authentication and security posture authorization solve different access-control requirements.
  2. Enterprise WLAN admission can use centralized identity authorization rather than shared open access.
  3. WLAN radio cell size influences roaming decisions and co-channel interference.
  4. WLAN centralized management requires a healthy control channel independent of user radio frames.

Explanation

Correct Answer

D:

The governing principle is: WLAN centralized management requires a healthy control channel independent of user radio frames. In this scenario, the appropriate action is: Troubleshoot AP-to-AC control reachability, certificates and supported software compatibility. Valid evidence would show: The AP maintains a stable CAPWAP session and adopts the approved service profile.

Incorrect Answers

A:

“Wireless authentication and security posture authorization solve different access-control requirements” responds to another technical or business failure: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. That source case depends on: Wireless authentication and security posture authorization solve different access-control requirements. The present issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The more direct action is “WLAN centralized management requires a healthy control channel independent of user radio frames” because WLAN centralized management requires a healthy control channel independent of user radio frames.

B:

“Enterprise WLAN admission can use centralized identity authorization rather than shared open access” responds to another technical or business failure: An SSID uses open authentication despite organizational requirements for enterprise identity verification. That source case depends on: Enterprise WLAN admission can use centralized identity authorization rather than shared open access. The present issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The more direct action is “WLAN centralized management requires a healthy control channel independent of user radio frames” because WLAN centralized management requires a healthy control channel independent of user radio frames.

C:

“WLAN radio cell size influences roaming decisions and co-channel interference” responds to another technical or business failure: A Wi-Fi deployment applies identical power levels in a dense conference center and clients roam unpredictably to distant APs. That source case depends on: WLAN radio cell size influences roaming decisions and co-channel interference. The present issue is: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. The more direct action is “WLAN centralized management requires a healthy control channel independent of user radio frames” because WLAN centralized management requires a healthy control channel independent of user radio frames.

Question 285

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing IS-IS level-aware topology and database synchronization during a production cutover (HCIP-H12-821-ISIS-072). The observed network issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. Which observation most directly verifies that the corrective change succeeded?

  1. Link-state packets carry supported larger metrics and computed paths match design.
  2. Other routers avoid the maintenance node for ordinary transit paths when alternatives exist.
  3. An eligible Level 1 neighbor forms in the expected common area.
  4. The point-to-point link forms the correct adjacency without a pseudonode LSP.

Explanation

Correct Answer

A:

The best verification observation is: Link-state packets carry supported larger metrics and computed paths match design. It demonstrates the corrective action: Verify wide-metric support and configuration consistency across participating routers. This fits the principle: IS-IS wide metrics extend usable cost representation for modern network designs. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“Other routers avoid the maintenance node for ordinary transit paths when alternatives exist” responds to another technical or business failure: A maintenance router still attracts IS-IS transit traffic after operators intend it to avoid forwarding. That source case depends on: The best verification observation is: Other routers avoid the maintenance node for ordinary transit paths when alternatives exist. The present issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The more direct action is “Link-state packets carry supported larger metrics and computed paths match design” because the best verification observation is: Link-state packets carry supported larger metrics and computed paths match design.

C:

“An eligible Level 1 neighbor forms in the expected common area” responds to another technical or business failure: Two Huawei routers share a link but their IS-IS NET addresses use different area identifiers while both are configured as Level 1. That source case depends on: The best verification observation is: An eligible Level 1 neighbor forms in the expected common area. The present issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The more direct action is “Link-state packets carry supported larger metrics and computed paths match design” because the best verification observation is: Link-state packets carry supported larger metrics and computed paths match design.

D:

“The point-to-point link forms the correct adjacency without a pseudonode LSP” responds to another technical or business failure: An engineer expects every IS-IS point-to-point interface to elect a LAN designated intermediate system. That source case depends on: The best verification observation is: The point-to-point link forms the correct adjacency without a pseudonode LSP. The present issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The more direct action is “Link-state packets carry supported larger metrics and computed paths match design” because the best verification observation is: Link-state packets carry supported larger metrics and computed paths match design.

Question 286

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing IS-IS level-aware topology and database synchronization during a production cutover (HCIP-H12-821-ISIS-072). The observed network issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. Which next engineering action best addresses the reported problem?

  1. Confirm the expected nearest Level 1/2 border route and associated default or leaking policy.
  2. Verify wide-metric support and configuration consistency across participating routers.
  3. Check whether IPv4 reachability is advertised under the correct IS-IS topology and filtered by policy.
  4. Inspect LSP sequence numbers and use CSNP or PSNP synchronization mechanisms to repair the database.

Explanation

Correct Answer

B:

The directly responsive action is: Verify wide-metric support and configuration consistency across participating routers. The specific reported fault is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. Confirmation should show: Link-state packets carry supported larger metrics and computed paths match design. The supporting technical principle is: IS-IS wide metrics extend usable cost representation for modern network designs.

Incorrect Answers

A:

“Confirm the expected nearest Level 1/2 border route and associated default or leaking policy” responds to another technical or business failure: A Level 1-only router cannot reach an IP prefix advertised only outside its local IS-IS area. That source case depends on: IS-IS Level 1 routing has area-local visibility and relies on Level 2 interarea reachability. The present issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The more direct action is “Verify wide-metric support and configuration consistency across participating routers” because IS-IS wide metrics extend usable cost representation for modern network designs.

C:

“Check whether IPv4 reachability is advertised under the correct IS-IS topology and filtered by policy” responds to another technical or business failure: An IS-IS neighbor forms correctly but the expected IPv4 destination never appears in downstream route tables. That source case depends on: An IS-IS neighbor relationship alone does not guarantee every network prefix is advertised. The present issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The more direct action is “Verify wide-metric support and configuration consistency across participating routers” because IS-IS wide metrics extend usable cost representation for modern network designs.

D:

“Inspect LSP sequence numbers and use CSNP or PSNP synchronization mechanisms to repair the database” responds to another technical or business failure: An IS-IS area contains conflicting LSP versions after connectivity flaps and routers disagree about routes. That source case depends on: IS-IS database consistency relies on link-state PDU sequencing and flooding acknowledgements. The present issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The more direct action is “Verify wide-metric support and configuration consistency across participating routers” because IS-IS wide metrics extend usable cost representation for modern network designs.

Question 287

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing IS-IS level-aware topology and database synchronization during a production cutover (HCIP-H12-821-ISIS-072). The observed network issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. Which routing, switching, or network principle best explains the appropriate solution?

  1. IS-IS database consistency relies on link-state PDU sequencing and flooding acknowledgements.
  2. IS-IS wide metrics extend usable cost representation for modern network designs.
  3. IS-IS DIS elections are a broadcast-LAN behavior, not a point-to-point requirement.
  4. IS-IS route leaking trades specific interarea visibility against scaling and policy control.

Explanation

Correct Answer

B:

The governing principle is: IS-IS wide metrics extend usable cost representation for modern network designs. In this scenario, the appropriate action is: Verify wide-metric support and configuration consistency across participating routers. Valid evidence would show: Link-state packets carry supported larger metrics and computed paths match design.

Incorrect Answers

A:

“IS-IS database consistency relies on link-state PDU sequencing and flooding acknowledgements” responds to another technical or business failure: An IS-IS area contains conflicting LSP versions after connectivity flaps and routers disagree about routes. That source case depends on: IS-IS database consistency relies on link-state PDU sequencing and flooding acknowledgements. The present issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The more direct action is “IS-IS wide metrics extend usable cost representation for modern network designs” because IS-IS wide metrics extend usable cost representation for modern network designs.

C:

“IS-IS DIS elections are a broadcast-LAN behavior, not a point-to-point requirement” responds to another technical or business failure: An engineer expects every IS-IS point-to-point interface to elect a LAN designated intermediate system. That source case depends on: IS-IS DIS elections are a broadcast-LAN behavior, not a point-to-point requirement. The present issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The more direct action is “IS-IS wide metrics extend usable cost representation for modern network designs” because IS-IS wide metrics extend usable cost representation for modern network designs.

D:

“IS-IS route leaking trades specific interarea visibility against scaling and policy control” responds to another technical or business failure: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. That source case depends on: IS-IS route leaking trades specific interarea visibility against scaling and policy control. The present issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The more direct action is “IS-IS wide metrics extend usable cost representation for modern network designs” because IS-IS wide metrics extend usable cost representation for modern network designs.

Question 288

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing IS-IS level-aware topology and database synchronization during a production cutover (HCIP-H12-821-ISIS-072). The observed network issue is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. Which ongoing preventive or detective control would best reduce recurrence?

  1. Include actual circuit topology and type in ISIS troubleshooting checks.
  2. Compare circuit-type values during core link acceptance.
  3. Review metric-style consistency before raising link costs.
  4. Audit attached-bit and border-exit policies in dual-homed areas.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Review metric-style consistency before raising link costs. This directly addresses the recurring fault: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The corrective action would be: Verify wide-metric support and configuration consistency across participating routers. Success is demonstrated when: Link-state packets carry supported larger metrics and computed paths match design.

Incorrect Answers

A:

“Include actual circuit topology and type in ISIS troubleshooting checks” addresses recurrence of another problem: An engineer expects every IS-IS point-to-point interface to elect a LAN designated intermediate system. That problem depends on: The preventive or detective safeguard is: Include actual circuit topology and type in ISIS troubleshooting checks. The recurring risk here is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The more targeted safeguard is “Review metric-style consistency before raising link costs” because the preventive or detective safeguard is: Review metric-style consistency before raising link costs.

B:

“Compare circuit-type values during core link acceptance” addresses recurrence of another problem: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. That problem depends on: The preventive or detective safeguard is: Compare circuit-type values during core link acceptance. The recurring risk here is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The more targeted safeguard is “Review metric-style consistency before raising link costs” because the preventive or detective safeguard is: Review metric-style consistency before raising link costs.

D:

“Audit attached-bit and border-exit policies in dual-homed areas” addresses recurrence of another problem: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. That problem depends on: The preventive or detective safeguard is: Audit attached-bit and border-exit policies in dual-homed areas. The recurring risk here is: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. The more targeted safeguard is “Review metric-style consistency before raising link costs” because the preventive or detective safeguard is: Review metric-style consistency before raising link costs.

Question 289

At fictional Maple Housing, a network engineer supporting property locations is reviewing OSPF area design and link-state convergence during a planned network scaling change (HCIP-H12-821-OSPF-073). The observed network issue is: An operator raises OSPF interface cost expecting every transit path to become more attractive. Which observation most directly verifies that the corrective change succeeded?

  1. The neighbor remains stable beyond multiple Dead intervals under normal traffic.
  2. The NSSA prefix appears beyond the area as an appropriate translated external route.
  3. Remote destinations select the lower cumulative-cost path after convergence.
  4. The intended default route is available and detailed inter-area summaries are suppressed as designed.

Explanation

Correct Answer

C:

The best verification observation is: Remote destinations select the lower cumulative-cost path after convergence. It demonstrates the corrective action: Model the new shortest-path calculation and apply costs to the intended links only. This fits the principle: OSPF uses accumulated interface cost to select shortest paths within its topology. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The neighbor remains stable beyond multiple Dead intervals under normal traffic” responds to another technical or business failure: Routers have the same network prefix but one side uses a different OSPF Hello interval on an Ethernet segment. That source case depends on: The best verification observation is: The neighbor remains stable beyond multiple Dead intervals under normal traffic. The present issue is: An operator raises OSPF interface cost expecting every transit path to become more attractive. The more direct action is “Remote destinations select the lower cumulative-cost path after convergence” because the best verification observation is: Remote destinations select the lower cumulative-cost path after convergence.

B:

“The NSSA prefix appears beyond the area as an appropriate translated external route” responds to another technical or business failure: An NSSA branch redistributes a local service prefix but the backbone never receives the route. That source case depends on: The best verification observation is: The NSSA prefix appears beyond the area as an appropriate translated external route. The present issue is: An operator raises OSPF interface cost expecting every transit path to become more attractive. The more direct action is “Remote destinations select the lower cumulative-cost path after convergence” because the best verification observation is: Remote destinations select the lower cumulative-cost path after convergence.

D:

“The intended default route is available and detailed inter-area summaries are suppressed as designed” responds to another technical or business failure: An OSPF totally stubby area receives unwanted detailed inter-area routes after only one router's configuration changes. That source case depends on: The best verification observation is: The intended default route is available and detailed inter-area summaries are suppressed as designed. The present issue is: An operator raises OSPF interface cost expecting every transit path to become more attractive. The more direct action is “Remote destinations select the lower cumulative-cost path after convergence” because the best verification observation is: Remote destinations select the lower cumulative-cost path after convergence.

Question 290

At fictional Maple Housing, a network engineer supporting property locations is reviewing OSPF area design and link-state convergence during a planned network scaling change (HCIP-H12-821-OSPF-073). The observed network issue is: An operator raises OSPF interface cost expecting every transit path to become more attractive. Which routing, switching, or network principle best explains the appropriate solution?

  1. OSPF two-way communication is established only after reciprocal Hello discovery.
  2. OSPF uses accumulated interface cost to select shortest paths within its topology.
  3. OSPF routers require unique identifiers for reliable link-state database exchange.
  4. OSPF area border routers convey inter-area network reachability using summary information.

Explanation

Correct Answer

B:

The governing principle is: OSPF uses accumulated interface cost to select shortest paths within its topology. In this scenario, the appropriate action is: Model the new shortest-path calculation and apply costs to the intended links only. Valid evidence would show: Remote destinations select the lower cumulative-cost path after convergence.

Incorrect Answers

A:

“OSPF two-way communication is established only after reciprocal Hello discovery” responds to another technical or business failure: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. That source case depends on: OSPF two-way communication is established only after reciprocal Hello discovery. The present issue is: An operator raises OSPF interface cost expecting every transit path to become more attractive. The more direct action is “OSPF uses accumulated interface cost to select shortest paths within its topology” because OSPF uses accumulated interface cost to select shortest paths within its topology.

C:

“OSPF routers require unique identifiers for reliable link-state database exchange” responds to another technical or business failure: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. That source case depends on: OSPF routers require unique identifiers for reliable link-state database exchange. The present issue is: An operator raises OSPF interface cost expecting every transit path to become more attractive. The more direct action is “OSPF uses accumulated interface cost to select shortest paths within its topology” because OSPF uses accumulated interface cost to select shortest paths within its topology.

D:

“OSPF area border routers convey inter-area network reachability using summary information” responds to another technical or business failure: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. That source case depends on: OSPF area border routers convey inter-area network reachability using summary information. The present issue is: An operator raises OSPF interface cost expecting every transit path to become more attractive. The more direct action is “OSPF uses accumulated interface cost to select shortest paths within its topology” because OSPF uses accumulated interface cost to select shortest paths within its topology.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests