McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 35

Question 340

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing BGP routing, path attributes and EVPN exchange during an initial deployment test (HCIP-H12-821-BGP-085). The observed network issue is: A received BGP prefix has a NEXT_HOP attribute unreachable inside the receiving autonomous system. Which observation most directly verifies that the corrective change succeeded?

  1. The prefix is permitted by the intended node and unwanted routes remain excluded.
  2. RR clients install a usable route with a resolvable forwarding next hop.
  3. The BGP FSM reaches Established and exchanges the intended prefixes.
  4. The BGP prefix becomes usable and installs a resolvable forwarding next hop.

Explanation

Correct Answer

D:

The best verification observation is: The BGP prefix becomes usable and installs a resolvable forwarding next hop. It demonstrates the corrective action: Establish reachability to the advertised next hop or apply supported next-hop-local policy where appropriate. This fits the principle: BGP route viability depends on recursive reachability of the next-hop attribute. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The prefix is permitted by the intended node and unwanted routes remain excluded” responds to another technical or business failure: A route-policy applies an import deny clause before the intended permit and unexpectedly drops every received route. That source case depends on: The best verification observation is: The prefix is permitted by the intended node and unwanted routes remain excluded. The present issue is: A received BGP prefix has a NEXT_HOP attribute unreachable inside the receiving autonomous system. The more direct action is “The BGP prefix becomes usable and installs a resolvable forwarding next hop” because the best verification observation is: The BGP prefix becomes usable and installs a resolvable forwarding next hop.

B:

“RR clients install a usable route with a resolvable forwarding next hop” responds to another technical or business failure: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. That source case depends on: The best verification observation is: RR clients install a usable route with a resolvable forwarding next hop. The present issue is: A received BGP prefix has a NEXT_HOP attribute unreachable inside the receiving autonomous system. The more direct action is “The BGP prefix becomes usable and installs a resolvable forwarding next hop” because the best verification observation is: The BGP prefix becomes usable and installs a resolvable forwarding next hop.

C:

“The BGP FSM reaches Established and exchanges the intended prefixes” responds to another technical or business failure: Two routers establish TCP connectivity but BGP stays in Active because the configured peer AS differs from the neighbor's actual AS. That source case depends on: The best verification observation is: The BGP FSM reaches Established and exchanges the intended prefixes. The present issue is: A received BGP prefix has a NEXT_HOP attribute unreachable inside the receiving autonomous system. The more direct action is “The BGP prefix becomes usable and installs a resolvable forwarding next hop” because the best verification observation is: The BGP prefix becomes usable and installs a resolvable forwarding next hop.

Question 341

At fictional Juniper Publishing, a network engineer supporting hybrid offices is reviewing controller-managed enterprise WLAN during a network troubleshooting drill (HCIP-H12-821-WLAN-086). The observed network issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. Which next engineering action best addresses the reported problem?

  1. Tune transmit power and roaming design based on RF measurements and actual client coverage.
  2. Configure a supported 802.1X and RADIUS authentication policy and validate appropriate encryption.
  3. Design supported AC redundancy and AP failover behavior and verify its licensing and topology.
  4. Integrate supported WLAN access control or NAC posture policy with identity decisions.

Explanation

Correct Answer

D:

The directly responsive action is: Integrate supported WLAN access control or NAC posture policy with identity decisions. The specific reported fault is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. Confirmation should show: Compliant devices enter the intended access role and unapproved devices receive a restricted result. The supporting technical principle is: Wireless authentication and security posture authorization solve different access-control requirements.

Incorrect Answers

A:

“Tune transmit power and roaming design based on RF measurements and actual client coverage” responds to another technical or business failure: A Wi-Fi deployment applies identical power levels in a dense conference center and clients roam unpredictably to distant APs. That source case depends on: WLAN radio cell size influences roaming decisions and co-channel interference. The present issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The more direct action is “Integrate supported WLAN access control or NAC posture policy with identity decisions” because Wireless authentication and security posture authorization solve different access-control requirements.

B:

“Configure a supported 802.1X and RADIUS authentication policy and validate appropriate encryption” responds to another technical or business failure: An SSID uses open authentication despite organizational requirements for enterprise identity verification. That source case depends on: Enterprise WLAN admission can use centralized identity authorization rather than shared open access. The present issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The more direct action is “Integrate supported WLAN access control or NAC posture policy with identity decisions” because Wireless authentication and security posture authorization solve different access-control requirements.

C:

“Design supported AC redundancy and AP failover behavior and verify its licensing and topology” responds to another technical or business failure: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. That source case depends on: Centralized WLAN control needs deliberate high availability and AP failover planning. The present issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The more direct action is “Integrate supported WLAN access control or NAC posture policy with identity decisions” because Wireless authentication and security posture authorization solve different access-control requirements.

Question 342

At fictional Juniper Publishing, a network engineer supporting hybrid offices is reviewing controller-managed enterprise WLAN during a network troubleshooting drill (HCIP-H12-821-WLAN-086). The observed network issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. Which ongoing preventive or detective control would best reduce recurrence?

  1. Verify WLAN identity and posture combinations after NAC policy changes.
  2. Monitor CAPWAP session stability after switching or ACL changes.
  3. Record RF occupancy and client performance after adding new APs.
  4. Rehearse controller loss with representative APs and client traffic.

Explanation

Correct Answer

A:

The preventive or detective safeguard is: Verify WLAN identity and posture combinations after NAC policy changes. This directly addresses the recurring fault: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The corrective action would be: Integrate supported WLAN access control or NAC posture policy with identity decisions. Success is demonstrated when: Compliant devices enter the intended access role and unapproved devices receive a restricted result.

Incorrect Answers

B:

“Monitor CAPWAP session stability after switching or ACL changes” addresses recurrence of another problem: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. That problem depends on: The preventive or detective safeguard is: Monitor CAPWAP session stability after switching or ACL changes. The recurring risk here is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The more targeted safeguard is “Verify WLAN identity and posture combinations after NAC policy changes” because the preventive or detective safeguard is: Verify WLAN identity and posture combinations after NAC policy changes.

C:

“Record RF occupancy and client performance after adding new APs” addresses recurrence of another problem: A large warehouse WLAN appears healthy but clients disconnect during a channel change because radios suffer co-channel congestion. That problem depends on: The preventive or detective safeguard is: Record RF occupancy and client performance after adding new APs. The recurring risk here is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The more targeted safeguard is “Verify WLAN identity and posture combinations after NAC policy changes” because the preventive or detective safeguard is: Verify WLAN identity and posture combinations after NAC policy changes.

D:

“Rehearse controller loss with representative APs and client traffic” addresses recurrence of another problem: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. That problem depends on: The preventive or detective safeguard is: Rehearse controller loss with representative APs and client traffic. The recurring risk here is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The more targeted safeguard is “Verify WLAN identity and posture combinations after NAC policy changes” because the preventive or detective safeguard is: Verify WLAN identity and posture combinations after NAC policy changes.

Question 343

At fictional Juniper Publishing, a network engineer supporting hybrid offices is reviewing controller-managed enterprise WLAN during a network troubleshooting drill (HCIP-H12-821-WLAN-086). The observed network issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. Which observation most directly verifies that the corrective change succeeded?

  1. The AP maintains a stable CAPWAP session and adopts the approved service profile.
  2. Roaming clients retain suitable network continuity or follow documented subnet mobility behavior.
  3. The AP establishes its authorized controller session and downloads the intended configuration.
  4. Compliant devices enter the intended access role and unapproved devices receive a restricted result.

Explanation

Correct Answer

D:

The best verification observation is: Compliant devices enter the intended access role and unapproved devices receive a restricted result. It demonstrates the corrective action: Integrate supported WLAN access control or NAC posture policy with identity decisions. This fits the principle: Wireless authentication and security posture authorization solve different access-control requirements. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The AP maintains a stable CAPWAP session and adopts the approved service profile” responds to another technical or business failure: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. That source case depends on: The best verification observation is: The AP maintains a stable CAPWAP session and adopts the approved service profile. The present issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The more direct action is “Compliant devices enter the intended access role and unapproved devices receive a restricted result” because the best verification observation is: Compliant devices enter the intended access role and unapproved devices receive a restricted result.

B:

“Roaming clients retain suitable network continuity or follow documented subnet mobility behavior” responds to another technical or business failure: Users roam between APs but lose sessions because the target AP maps the same SSID to a different unplanned VLAN. That source case depends on: The best verification observation is: Roaming clients retain suitable network continuity or follow documented subnet mobility behavior. The present issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The more direct action is “Compliant devices enter the intended access role and unapproved devices receive a restricted result” because the best verification observation is: Compliant devices enter the intended access role and unapproved devices receive a restricted result.

C:

“The AP establishes its authorized controller session and downloads the intended configuration” responds to another technical or business failure: A large Huawei WLAN has many access points but a new AP cannot register because it discovers the wrong wireless controller. That source case depends on: The best verification observation is: The AP establishes its authorized controller session and downloads the intended configuration. The present issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The more direct action is “Compliant devices enter the intended access role and unapproved devices receive a restricted result” because the best verification observation is: Compliant devices enter the intended access role and unapproved devices receive a restricted result.

Question 344

At fictional Juniper Publishing, a network engineer supporting hybrid offices is reviewing controller-managed enterprise WLAN during a network troubleshooting drill (HCIP-H12-821-WLAN-086). The observed network issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. Which routing, switching, or network principle best explains the appropriate solution?

  1. Centralized WLAN control needs deliberate high availability and AP failover planning.
  2. WLAN centralized management requires a healthy control channel independent of user radio frames.
  3. Wireless authentication and security posture authorization solve different access-control requirements.
  4. VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments.

Explanation

Correct Answer

C:

The governing principle is: Wireless authentication and security posture authorization solve different access-control requirements. In this scenario, the appropriate action is: Integrate supported WLAN access control or NAC posture policy with identity decisions. Valid evidence would show: Compliant devices enter the intended access role and unapproved devices receive a restricted result.

Incorrect Answers

A:

“Centralized WLAN control needs deliberate high availability and AP failover planning” responds to another technical or business failure: A large WLAN loses client services during AC maintenance because all APs depend on a single unprotected controller. That source case depends on: Centralized WLAN control needs deliberate high availability and AP failover planning. The present issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The more direct action is “Wireless authentication and security posture authorization solve different access-control requirements” because Wireless authentication and security posture authorization solve different access-control requirements.

B:

“WLAN centralized management requires a healthy control channel independent of user radio frames” responds to another technical or business failure: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. That source case depends on: WLAN centralized management requires a healthy control channel independent of user radio frames. The present issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The more direct action is “Wireless authentication and security posture authorization solve different access-control requirements” because Wireless authentication and security posture authorization solve different access-control requirements.

D:

“VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments” responds to another technical or business failure: A large campus uses one client subnet for all wireless users and DHCP lease exhaustion occurs at busy events. That source case depends on: VLAN pooling can distribute wireless clients across multiple managed Layer 2 segments. The present issue is: A campus wireless network admits noncompliant devices to a sensitive SSID because network admission-control posture is not evaluated. The more direct action is “Wireless authentication and security posture authorization solve different access-control requirements” because Wireless authentication and security posture authorization solve different access-control requirements.

Question 345

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing IS-IS level-aware topology and database synchronization during a lab-to-production acceptance (HCIP-H12-821-ISIS-087). The observed network issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. Which routing, switching, or network principle best explains the appropriate solution?

  1. IS-IS route leaking trades specific interarea visibility against scaling and policy control.
  2. IS-IS routing integrity can require compatible authentication at the relevant PDU scope.
  3. IS-IS LAN DIS behavior differs from OSPF designated-router adjacency handling.
  4. An IS-IS neighbor relationship alone does not guarantee every network prefix is advertised.

Explanation

Correct Answer

A:

The governing principle is: IS-IS route leaking trades specific interarea visibility against scaling and policy control. In this scenario, the appropriate action is: Restrict permitted interlevel route leaking with appropriate routing policy and aggregation. Valid evidence would show: Only the intended reachable interarea prefixes appear in the Level 1 database.

Incorrect Answers

B:

“IS-IS routing integrity can require compatible authentication at the relevant PDU scope” responds to another technical or business failure: An IS-IS adjacency repeatedly resets because neighboring devices use incompatible authentication settings. That source case depends on: IS-IS routing integrity can require compatible authentication at the relevant PDU scope. The present issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The more direct action is “IS-IS route leaking trades specific interarea visibility against scaling and policy control” because IS-IS route leaking trades specific interarea visibility against scaling and policy control.

C:

“IS-IS LAN DIS behavior differs from OSPF designated-router adjacency handling” responds to another technical or business failure: An IS-IS router is elected designated intermediate system on an Ethernet segment but an engineer calls it an OSPF DR. That source case depends on: IS-IS LAN DIS behavior differs from OSPF designated-router adjacency handling. The present issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The more direct action is “IS-IS route leaking trades specific interarea visibility against scaling and policy control” because IS-IS route leaking trades specific interarea visibility against scaling and policy control.

D:

“An IS-IS neighbor relationship alone does not guarantee every network prefix is advertised” responds to another technical or business failure: An IS-IS neighbor forms correctly but the expected IPv4 destination never appears in downstream route tables. That source case depends on: An IS-IS neighbor relationship alone does not guarantee every network prefix is advertised. The present issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The more direct action is “IS-IS route leaking trades specific interarea visibility against scaling and policy control” because IS-IS route leaking trades specific interarea visibility against scaling and policy control.

Question 346

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing IS-IS level-aware topology and database synchronization during a lab-to-production acceptance (HCIP-H12-821-ISIS-087). The observed network issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. Which observation most directly verifies that the corrective change succeeded?

  1. The point-to-point link forms the correct adjacency without a pseudonode LSP.
  2. Only the intended reachable interarea prefixes appear in the Level 1 database.
  3. Other routers avoid the maintenance node for ordinary transit paths when alternatives exist.
  4. An eligible Level 1 neighbor forms in the expected common area.

Explanation

Correct Answer

B:

The best verification observation is: Only the intended reachable interarea prefixes appear in the Level 1 database. It demonstrates the corrective action: Restrict permitted interlevel route leaking with appropriate routing policy and aggregation. This fits the principle: IS-IS route leaking trades specific interarea visibility against scaling and policy control. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The point-to-point link forms the correct adjacency without a pseudonode LSP” responds to another technical or business failure: An engineer expects every IS-IS point-to-point interface to elect a LAN designated intermediate system. That source case depends on: The best verification observation is: The point-to-point link forms the correct adjacency without a pseudonode LSP. The present issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The more direct action is “Only the intended reachable interarea prefixes appear in the Level 1 database” because the best verification observation is: Only the intended reachable interarea prefixes appear in the Level 1 database.

C:

“Other routers avoid the maintenance node for ordinary transit paths when alternatives exist” responds to another technical or business failure: A maintenance router still attracts IS-IS transit traffic after operators intend it to avoid forwarding. That source case depends on: The best verification observation is: Other routers avoid the maintenance node for ordinary transit paths when alternatives exist. The present issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The more direct action is “Only the intended reachable interarea prefixes appear in the Level 1 database” because the best verification observation is: Only the intended reachable interarea prefixes appear in the Level 1 database.

D:

“An eligible Level 1 neighbor forms in the expected common area” responds to another technical or business failure: Two Huawei routers share a link but their IS-IS NET addresses use different area identifiers while both are configured as Level 1. That source case depends on: The best verification observation is: An eligible Level 1 neighbor forms in the expected common area. The present issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The more direct action is “Only the intended reachable interarea prefixes appear in the Level 1 database” because the best verification observation is: Only the intended reachable interarea prefixes appear in the Level 1 database.

Question 347

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing IS-IS level-aware topology and database synchronization during a lab-to-production acceptance (HCIP-H12-821-ISIS-087). The observed network issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. Which next engineering action best addresses the reported problem?

  1. Check whether IPv4 reachability is advertised under the correct IS-IS topology and filtered by policy.
  2. Confirm the expected nearest Level 1/2 border route and associated default or leaking policy.
  3. Align the intended IS-IS area identifiers or establish a deliberate Level 2 relationship.
  4. Restrict permitted interlevel route leaking with appropriate routing policy and aggregation.

Explanation

Correct Answer

D:

The directly responsive action is: Restrict permitted interlevel route leaking with appropriate routing policy and aggregation. The specific reported fault is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. Confirmation should show: Only the intended reachable interarea prefixes appear in the Level 1 database. The supporting technical principle is: IS-IS route leaking trades specific interarea visibility against scaling and policy control.

Incorrect Answers

A:

“Check whether IPv4 reachability is advertised under the correct IS-IS topology and filtered by policy” responds to another technical or business failure: An IS-IS neighbor forms correctly but the expected IPv4 destination never appears in downstream route tables. That source case depends on: An IS-IS neighbor relationship alone does not guarantee every network prefix is advertised. The present issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The more direct action is “Restrict permitted interlevel route leaking with appropriate routing policy and aggregation” because IS-IS route leaking trades specific interarea visibility against scaling and policy control.

B:

“Confirm the expected nearest Level 1/2 border route and associated default or leaking policy” responds to another technical or business failure: A Level 1-only router cannot reach an IP prefix advertised only outside its local IS-IS area. That source case depends on: IS-IS Level 1 routing has area-local visibility and relies on Level 2 interarea reachability. The present issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The more direct action is “Restrict permitted interlevel route leaking with appropriate routing policy and aggregation” because IS-IS route leaking trades specific interarea visibility against scaling and policy control.

C:

“Align the intended IS-IS area identifiers or establish a deliberate Level 2 relationship” responds to another technical or business failure: Two Huawei routers share a link but their IS-IS NET addresses use different area identifiers while both are configured as Level 1. That source case depends on: IS-IS Level 1 adjacency requires compatible area membership. The present issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The more direct action is “Restrict permitted interlevel route leaking with appropriate routing policy and aggregation” because IS-IS route leaking trades specific interarea visibility against scaling and policy control.

Question 348

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing IS-IS level-aware topology and database synchronization during a lab-to-production acceptance (HCIP-H12-821-ISIS-087). The observed network issue is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. Which ongoing preventive or detective control would best reduce recurrence?

  1. Test default reachability from every Level 1 access area.
  2. Compare circuit-type values during core link acceptance.
  3. Audit attached-bit and border-exit policies in dual-homed areas.
  4. Review leaked-prefix counts during Level 1 and Level 2 changes.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Review leaked-prefix counts during Level 1 and Level 2 changes. This directly addresses the recurring fault: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The corrective action would be: Restrict permitted interlevel route leaking with appropriate routing policy and aggregation. Success is demonstrated when: Only the intended reachable interarea prefixes appear in the Level 1 database.

Incorrect Answers

A:

“Test default reachability from every Level 1 access area” addresses recurrence of another problem: A Level 1-only router cannot reach an IP prefix advertised only outside its local IS-IS area. That problem depends on: The preventive or detective safeguard is: Test default reachability from every Level 1 access area. The recurring risk here is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The more targeted safeguard is “Review leaked-prefix counts during Level 1 and Level 2 changes” because the preventive or detective safeguard is: Review leaked-prefix counts during Level 1 and Level 2 changes.

B:

“Compare circuit-type values during core link acceptance” addresses recurrence of another problem: Two Level 2 IS-IS routers do not form neighbors because one interface is configured for Level 1-only adjacencies. That problem depends on: The preventive or detective safeguard is: Compare circuit-type values during core link acceptance. The recurring risk here is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The more targeted safeguard is “Review leaked-prefix counts during Level 1 and Level 2 changes” because the preventive or detective safeguard is: Review leaked-prefix counts during Level 1 and Level 2 changes.

C:

“Audit attached-bit and border-exit policies in dual-homed areas” addresses recurrence of another problem: An IS-IS Level 1 router gets an unwanted default path after an L1/L2 node reports reachability to other areas. That problem depends on: The preventive or detective safeguard is: Audit attached-bit and border-exit policies in dual-homed areas. The recurring risk here is: An engineer leaks all Level 2 routes into Level 1 and overwhelms a branch routing table. The more targeted safeguard is “Review leaked-prefix counts during Level 1 and Level 2 changes” because the preventive or detective safeguard is: Review leaked-prefix counts during Level 1 and Level 2 changes.

Question 349

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing IS-IS level-aware topology and database synchronization during an initial deployment test (HCIP-H12-821-ISIS-088). The observed network issue is: A maintenance router still attracts IS-IS transit traffic after operators intend it to avoid forwarding. Which routing, switching, or network principle best explains the appropriate solution?

  1. IS-IS overload signaling can discourage use of a router as a transit node.
  2. An IS-IS neighbor relationship alone does not guarantee every network prefix is advertised.
  3. IS-IS LAN DIS behavior differs from OSPF designated-router adjacency handling.
  4. IS-IS wide metrics extend usable cost representation for modern network designs.

Explanation

Correct Answer

A:

The governing principle is: IS-IS overload signaling can discourage use of a router as a transit node. In this scenario, the appropriate action is: Use supported IS-IS overload-bit maintenance procedures while preserving required local reachability. Valid evidence would show: Other routers avoid the maintenance node for ordinary transit paths when alternatives exist.

Incorrect Answers

B:

“An IS-IS neighbor relationship alone does not guarantee every network prefix is advertised” responds to another technical or business failure: An IS-IS neighbor forms correctly but the expected IPv4 destination never appears in downstream route tables. That source case depends on: An IS-IS neighbor relationship alone does not guarantee every network prefix is advertised. The present issue is: A maintenance router still attracts IS-IS transit traffic after operators intend it to avoid forwarding. The more direct action is “IS-IS overload signaling can discourage use of a router as a transit node” because IS-IS overload signaling can discourage use of a router as a transit node.

C:

“IS-IS LAN DIS behavior differs from OSPF designated-router adjacency handling” responds to another technical or business failure: An IS-IS router is elected designated intermediate system on an Ethernet segment but an engineer calls it an OSPF DR. That source case depends on: IS-IS LAN DIS behavior differs from OSPF designated-router adjacency handling. The present issue is: A maintenance router still attracts IS-IS transit traffic after operators intend it to avoid forwarding. The more direct action is “IS-IS overload signaling can discourage use of a router as a transit node” because IS-IS overload signaling can discourage use of a router as a transit node.

D:

“IS-IS wide metrics extend usable cost representation for modern network designs” responds to another technical or business failure: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. That source case depends on: IS-IS wide metrics extend usable cost representation for modern network designs. The present issue is: A maintenance router still attracts IS-IS transit traffic after operators intend it to avoid forwarding. The more direct action is “IS-IS overload signaling can discourage use of a router as a transit node” because IS-IS overload signaling can discourage use of a router as a transit node.

Question 350

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing IS-IS level-aware topology and database synchronization during an initial deployment test (HCIP-H12-821-ISIS-088). The observed network issue is: A maintenance router still attracts IS-IS transit traffic after operators intend it to avoid forwarding. Which next engineering action best addresses the reported problem?

  1. Use supported IS-IS overload-bit maintenance procedures while preserving required local reachability.
  2. Verify wide-metric support and configuration consistency across participating routers.
  3. Permit the appropriate IS-IS link-layer PDUs and check physical segment connectivity.
  4. Configure matching supported IS-IS Hello or LSP authentication parameters for the peering scope.

Explanation

Correct Answer

A:

The directly responsive action is: Use supported IS-IS overload-bit maintenance procedures while preserving required local reachability. The specific reported fault is: A maintenance router still attracts IS-IS transit traffic after operators intend it to avoid forwarding. Confirmation should show: Other routers avoid the maintenance node for ordinary transit paths when alternatives exist. The supporting technical principle is: IS-IS overload signaling can discourage use of a router as a transit node.

Incorrect Answers

B:

“Verify wide-metric support and configuration consistency across participating routers” responds to another technical or business failure: A large IS-IS deployment uses narrow metrics until a new path cost exceeds the legacy representable range. That source case depends on: IS-IS wide metrics extend usable cost representation for modern network designs. The present issue is: A maintenance router still attracts IS-IS transit traffic after operators intend it to avoid forwarding. The more direct action is “Use supported IS-IS overload-bit maintenance procedures while preserving required local reachability” because IS-IS overload signaling can discourage use of a router as a transit node.

C:

“Permit the appropriate IS-IS link-layer PDUs and check physical segment connectivity” responds to another technical or business failure: IS-IS adjacency remains Down when Hello frames are filtered by an intermediate layer-2 device. That source case depends on: IS-IS exchanges routing PDUs directly over the link rather than using ordinary IP multicast transport. The present issue is: A maintenance router still attracts IS-IS transit traffic after operators intend it to avoid forwarding. The more direct action is “Use supported IS-IS overload-bit maintenance procedures while preserving required local reachability” because IS-IS overload signaling can discourage use of a router as a transit node.

D:

“Configure matching supported IS-IS Hello or LSP authentication parameters for the peering scope” responds to another technical or business failure: An IS-IS adjacency repeatedly resets because neighboring devices use incompatible authentication settings. That source case depends on: IS-IS routing integrity can require compatible authentication at the relevant PDU scope. The present issue is: A maintenance router still attracts IS-IS transit traffic after operators intend it to avoid forwarding. The more direct action is “Use supported IS-IS overload-bit maintenance procedures while preserving required local reachability” because IS-IS overload signaling can discourage use of a router as a transit node.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests