McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 4

Question 30

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing OSPF area design and link-state convergence during a network troubleshooting drill (HCIP-H12-821-OSPF-008). The observed network issue is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. Which routing, switching, or network principle best explains the appropriate solution?

  1. OSPF external routing requires correctly originated and flooded AS-external LSAs.
  2. NSSA external routes use Type 7 LSAs internally and can be translated at an ABR.
  3. Route summarization reduces advertisements but can conceal specific reachability failures.
  4. OSPF neighbor liveness requires compatible timer parameters on the shared network.

Explanation

Correct Answer

B:

The governing principle is: NSSA external routes use Type 7 LSAs internally and can be translated at an ABR. In this scenario, the appropriate action is: Check NSSA Type 7 origination and the ABR's permitted Type 7 to Type 5 translation. Valid evidence would show: The NSSA prefix appears beyond the area as an appropriate translated external route.

Incorrect Answers

A:

“OSPF external routing requires correctly originated and flooded AS-external LSAs” responds to another technical or business failure: An ASBR redistributes a static service subnet but other areas never see its external OSPF destination. That source case depends on: OSPF external routing requires correctly originated and flooded AS-external LSAs. The present issue is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. The more direct action is “NSSA external routes use Type 7 LSAs internally and can be translated at an ABR” because NSSA external routes use Type 7 LSAs internally and can be translated at an ABR.

C:

“Route summarization reduces advertisements but can conceal specific reachability failures” responds to another technical or business failure: An OSPF summary aggregate covers a disconnected subnet and an engineer assumes all summarized addresses have valid next hops. That source case depends on: Route summarization reduces advertisements but can conceal specific reachability failures. The present issue is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. The more direct action is “NSSA external routes use Type 7 LSAs internally and can be translated at an ABR” because NSSA external routes use Type 7 LSAs internally and can be translated at an ABR.

D:

“OSPF neighbor liveness requires compatible timer parameters on the shared network” responds to another technical or business failure: Routers have the same network prefix but one side uses a different OSPF Hello interval on an Ethernet segment. That source case depends on: OSPF neighbor liveness requires compatible timer parameters on the shared network. The present issue is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. The more direct action is “NSSA external routes use Type 7 LSAs internally and can be translated at an ABR” because NSSA external routes use Type 7 LSAs internally and can be translated at an ABR.

Question 31

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing OSPF area design and link-state convergence during a network troubleshooting drill (HCIP-H12-821-OSPF-008). The observed network issue is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. Which ongoing preventive or detective control would best reduce recurrence?

  1. Capture Hellos from both devices when link-state adjacencies stall.
  2. Validate Type 7 generation and ABR translation during branch redistribution testing.
  3. Test FIB next-hop count and path usage after ECMP policy changes.
  4. Trend OSPF adjacency and SPF event rates alongside interface health.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Validate Type 7 generation and ABR translation during branch redistribution testing. This directly addresses the recurring fault: An NSSA branch redistributes a local service prefix but the backbone never receives the route. The corrective action would be: Check NSSA Type 7 origination and the ABR's permitted Type 7 to Type 5 translation. Success is demonstrated when: The NSSA prefix appears beyond the area as an appropriate translated external route.

Incorrect Answers

A:

“Capture Hellos from both devices when link-state adjacencies stall” addresses recurrence of another problem: A transit OSPF link remains in Init because one router never sees its own router ID listed in neighbor Hellos. That problem depends on: The preventive or detective safeguard is: Capture Hellos from both devices when link-state adjacencies stall. The recurring risk here is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. The more targeted safeguard is “Validate Type 7 generation and ABR translation during branch redistribution testing” because the preventive or detective safeguard is: Validate Type 7 generation and ABR translation during branch redistribution testing.

C:

“Test FIB next-hop count and path usage after ECMP policy changes” addresses recurrence of another problem: Two equal-cost OSPF paths exist but traffic uses only one because the forwarding configuration limits ECMP. That problem depends on: The preventive or detective safeguard is: Test FIB next-hop count and path usage after ECMP policy changes. The recurring risk here is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. The more targeted safeguard is “Validate Type 7 generation and ABR translation during branch redistribution testing” because the preventive or detective safeguard is: Validate Type 7 generation and ABR translation during branch redistribution testing.

D:

“Trend OSPF adjacency and SPF event rates alongside interface health” addresses recurrence of another problem: A router repeatedly runs SPF after frequent interface state changes and application latency rises. That problem depends on: The preventive or detective safeguard is: Trend OSPF adjacency and SPF event rates alongside interface health. The recurring risk here is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. The more targeted safeguard is “Validate Type 7 generation and ABR translation during branch redistribution testing” because the preventive or detective safeguard is: Validate Type 7 generation and ABR translation during branch redistribution testing.

Question 32

At fictional Northgate Services, a network engineer supporting head-office connectivity is reviewing OSPF area design and link-state convergence during a network troubleshooting drill (HCIP-H12-821-OSPF-008). The observed network issue is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. Which next engineering action best addresses the reported problem?

  1. Analyze Hello loss, Dead timers, interfaces errors and broadcast congestion rather than changing router IDs.
  2. Align compatible OSPF network types and validate hello and DR behavior for the actual media.
  3. Verify equal SPF costs and the route count installed in the FIB before adjusting ECMP support.
  4. Check NSSA Type 7 origination and the ABR's permitted Type 7 to Type 5 translation.

Explanation

Correct Answer

D:

The directly responsive action is: Check NSSA Type 7 origination and the ABR's permitted Type 7 to Type 5 translation. The specific reported fault is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. Confirmation should show: The NSSA prefix appears beyond the area as an appropriate translated external route. The supporting technical principle is: NSSA external routes use Type 7 LSAs internally and can be translated at an ABR.

Incorrect Answers

A:

“Analyze Hello loss, Dead timers, interfaces errors and broadcast congestion rather than changing router IDs” responds to another technical or business failure: An OSPF neighbor oscillates between Full and Down on a congested shared segment despite correct area IDs. That source case depends on: OSPF detects neighbor failure using liveness Hellos that can be impacted by packet loss. The present issue is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. The more direct action is “Check NSSA Type 7 origination and the ABR's permitted Type 7 to Type 5 translation” because NSSA external routes use Type 7 LSAs internally and can be translated at an ABR.

B:

“Align compatible OSPF network types and validate hello and DR behavior for the actual media” responds to another technical or business failure: Two OSPF devices on a point-to-point fiber cannot build an adjacency because their interface network types differ. That source case depends on: OSPF interface network type affects neighbor handling and designated router behavior. The present issue is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. The more direct action is “Check NSSA Type 7 origination and the ABR's permitted Type 7 to Type 5 translation” because NSSA external routes use Type 7 LSAs internally and can be translated at an ABR.

C:

“Verify equal SPF costs and the route count installed in the FIB before adjusting ECMP support” responds to another technical or business failure: Two equal-cost OSPF paths exist but traffic uses only one because the forwarding configuration limits ECMP. That source case depends on: Equal-cost shortest paths must also be installed under platform ECMP constraints. The present issue is: An NSSA branch redistributes a local service prefix but the backbone never receives the route. The more direct action is “Check NSSA Type 7 origination and the ABR's permitted Type 7 to Type 5 translation” because NSSA external routes use Type 7 LSAs internally and can be translated at an ABR.

Question 33

At fictional Dovetail University, a network engineer supporting campus routing is reviewing enterprise campus, data center and SD-WAN architecture during a lab-to-production acceptance (HCIP-H12-821-SOLUTIONS-009). The observed network issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. Which ongoing preventive or detective control would best reduce recurrence?

  1. Test SLA thresholds and failover of representative application classes.
  2. Verify forwarding during controller disconnection as part of solution acceptance.
  3. Monitor CAPWAP session stability after switching or ACL changes.
  4. Record the relevant best-path comparison attributes in route-change reviews.

Explanation

Correct Answer

A:

The preventive or detective safeguard is: Test SLA thresholds and failover of representative application classes. This directly addresses the recurring fault: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The corrective action would be: Define application-aware transport selection based on permitted paths and measured loss, delay and jitter. Success is demonstrated when: Critical applications take the planned transport path under induced link impairment.

Incorrect Answers

B:

“Verify forwarding during controller disconnection as part of solution acceptance” addresses recurrence of another problem: An SDN-WAN solution diagram confuses centralized orchestration with the devices that actually forward WAN packets. That problem depends on: The preventive or detective safeguard is: Verify forwarding during controller disconnection as part of solution acceptance. The recurring risk here is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The more targeted safeguard is “Test SLA thresholds and failover of representative application classes” because the preventive or detective safeguard is: Test SLA thresholds and failover of representative application classes.

C:

“Monitor CAPWAP session stability after switching or ACL changes” addresses recurrence of another problem: A controller provides SSID configuration but one AP never accepts a management policy because its CAPWAP session repeatedly resets. That problem depends on: The preventive or detective safeguard is: Monitor CAPWAP session stability after switching or ACL changes. The recurring risk here is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The more targeted safeguard is “Test SLA thresholds and failover of representative application classes” because the preventive or detective safeguard is: Test SLA thresholds and failover of representative application classes.

D:

“Record the relevant best-path comparison attributes in route-change reviews” addresses recurrence of another problem: Two customer-facing links show unequal AS_PATH lengths and operators insist the longer path is always preferred regardless of policy. That problem depends on: The preventive or detective safeguard is: Record the relevant best-path comparison attributes in route-change reviews. The recurring risk here is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The more targeted safeguard is “Test SLA thresholds and failover of representative application classes” because the preventive or detective safeguard is: Test SLA thresholds and failover of representative application classes.

Question 34

At fictional Dovetail University, a network engineer supporting campus routing is reviewing enterprise campus, data center and SD-WAN architecture during a lab-to-production acceptance (HCIP-H12-821-SOLUTIONS-009). The observed network issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. Which next engineering action best addresses the reported problem?

  1. Plan access, aggregation and core layers with segmentation and predictable routing boundaries.
  2. Configure or learn a valid IPv6 default route and verify neighbor reachability separately.
  3. Validate supporting component routes and safe aggregate generation or discard behavior.
  4. Define application-aware transport selection based on permitted paths and measured loss, delay and jitter.

Explanation

Correct Answer

D:

The directly responsive action is: Define application-aware transport selection based on permitted paths and measured loss, delay and jitter. The specific reported fault is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. Confirmation should show: Critical applications take the planned transport path under induced link impairment. The supporting technical principle is: SD-WAN policy can align application forwarding with measured link performance and business intent.

Incorrect Answers

A:

“Plan access, aggregation and core layers with segmentation and predictable routing boundaries” responds to another technical or business failure: An enterprise campus project chooses a flat broadcast domain for thousands of users rather than a hierarchical design. That source case depends on: Hierarchical campus designs improve scaling and fault isolation compared with unchecked flat networks. The present issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The more direct action is “Define application-aware transport selection based on permitted paths and measured loss, delay and jitter” because SD-WAN policy can align application forwarding with measured link performance and business intent.

B:

“Configure or learn a valid IPv6 default route and verify neighbor reachability separately” responds to another technical or business failure: An engineer configures an IPv6 global unicast address but assumes this automatically establishes external default routing. That source case depends on: IPv6 addressing, NDP and route selection are separate prerequisites for forwarding. The present issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The more direct action is “Define application-aware transport selection based on permitted paths and measured loss, delay and jitter” because SD-WAN policy can align application forwarding with measured link performance and business intent.

C:

“Validate supporting component routes and safe aggregate generation or discard behavior” responds to another technical or business failure: An operator creates a BGP aggregate but traffic is black-holed because no specific reachable next hop supports it. That source case depends on: BGP aggregation must be consistent with actual routed component reachability. The present issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The more direct action is “Define application-aware transport selection based on permitted paths and measured loss, delay and jitter” because SD-WAN policy can align application forwarding with measured link performance and business intent.

Question 35

At fictional Dovetail University, a network engineer supporting campus routing is reviewing enterprise campus, data center and SD-WAN architecture during a lab-to-production acceptance (HCIP-H12-821-SOLUTIONS-009). The observed network issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. Which routing, switching, or network principle best explains the appropriate solution?

  1. Edge-port optimizations are intended for endpoint-facing links rather than switch-to-switch trunks.
  2. SD-WAN policy can align application forwarding with measured link performance and business intent.
  3. Overlay reachability depends on reliable underlay transport and consistent endpoint mappings.
  4. Egress congestion scheduling determines queuing delay among traffic classes.

Explanation

Correct Answer

B:

The governing principle is: SD-WAN policy can align application forwarding with measured link performance and business intent. In this scenario, the appropriate action is: Define application-aware transport selection based on permitted paths and measured loss, delay and jitter. Valid evidence would show: Critical applications take the planned transport path under induced link impairment.

Incorrect Answers

A:

“Edge-port optimizations are intended for endpoint-facing links rather than switch-to-switch trunks” responds to another technical or business failure: An engineer places an edge-port setting on a trunk toward another switch and an unexpected BPDU enters the network. That source case depends on: Edge-port optimizations are intended for endpoint-facing links rather than switch-to-switch trunks. The present issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The more direct action is “SD-WAN policy can align application forwarding with measured link performance and business intent” because SD-WAN policy can align application forwarding with measured link performance and business intent.

C:

“Overlay reachability depends on reliable underlay transport and consistent endpoint mappings” responds to another technical or business failure: A data center project assumes any VXLAN service works without adequate underlay IP reachability between VTEPs. That source case depends on: Overlay reachability depends on reliable underlay transport and consistent endpoint mappings. The present issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The more direct action is “SD-WAN policy can align application forwarding with measured link performance and business intent” because SD-WAN policy can align application forwarding with measured link performance and business intent.

D:

“Egress congestion scheduling determines queuing delay among traffic classes” responds to another technical or business failure: A campus egress port uses weighted scheduling but latency-sensitive voice sits behind large bulk transfers. That source case depends on: Egress congestion scheduling determines queuing delay among traffic classes. The present issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The more direct action is “SD-WAN policy can align application forwarding with measured link performance and business intent” because SD-WAN policy can align application forwarding with measured link performance and business intent.

Question 36

At fictional Dovetail University, a network engineer supporting campus routing is reviewing enterprise campus, data center and SD-WAN architecture during a lab-to-production acceptance (HCIP-H12-821-SOLUTIONS-009). The observed network issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. Which observation most directly verifies that the corrective change succeeded?

  1. Neighbor databases show distinct system IDs and consistent LSP origins.
  2. Critical applications take the planned transport path under induced link impairment.
  3. Only approved management hosts can start authorized sessions to the device.
  4. VTEPs can reach one another and approved tenant overlays exchange intended traffic.

Explanation

Correct Answer

B:

The best verification observation is: Critical applications take the planned transport path under induced link impairment. It demonstrates the corrective action: Define application-aware transport selection based on permitted paths and measured loss, delay and jitter. This fits the principle: SD-WAN policy can align application forwarding with measured link performance and business intent. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Neighbor databases show distinct system IDs and consistent LSP origins” responds to another technical or business failure: An IS-IS configuration reuses one system ID on two distinct routers and link-state advertisements become ambiguous. That source case depends on: The best verification observation is: Neighbor databases show distinct system IDs and consistent LSP origins. The present issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The more direct action is “Critical applications take the planned transport path under induced link impairment” because the best verification observation is: Critical applications take the planned transport path under induced link impairment.

C:

“Only approved management hosts can start authorized sessions to the device” responds to another technical or business failure: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. That source case depends on: The best verification observation is: Only approved management hosts can start authorized sessions to the device. The present issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The more direct action is “Critical applications take the planned transport path under induced link impairment” because the best verification observation is: Critical applications take the planned transport path under induced link impairment.

D:

“VTEPs can reach one another and approved tenant overlays exchange intended traffic” responds to another technical or business failure: A data center project assumes any VXLAN service works without adequate underlay IP reachability between VTEPs. That source case depends on: The best verification observation is: VTEPs can reach one another and approved tenant overlays exchange intended traffic. The present issue is: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. The more direct action is “Critical applications take the planned transport path under induced link impairment” because the best verification observation is: Critical applications take the planned transport path under induced link impairment.

Question 37

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing VRRP, BFD and redundancy design during a customer network audit (HCIP-H12-821-RELIABILITY-010). The observed network issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. Which routing, switching, or network principle best explains the appropriate solution?

  1. BFD monitors a forwarding path but does not by itself create routing advertisements.
  2. Network reliability depends on eliminating shared risks, not only duplicating network devices.
  3. Unstable track state can cause repeated virtual-gateway ownership changes.
  4. Gateway availability and end-to-end network reachability are different reliability properties.

Explanation

Correct Answer

D:

The governing principle is: Gateway availability and end-to-end network reachability are different reliability properties. In this scenario, the appropriate action is: Configure suitable upstream route tracking and investigate WAN reachability beyond the LAN gateway. Valid evidence would show: Failover selects a router with a viable upstream route and restores service connectivity.

Incorrect Answers

A:

“BFD monitors a forwarding path but does not by itself create routing advertisements” responds to another technical or business failure: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. That source case depends on: BFD monitors a forwarding path but does not by itself create routing advertisements. The present issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The more direct action is “Gateway availability and end-to-end network reachability are different reliability properties” because Gateway availability and end-to-end network reachability are different reliability properties.

B:

“Network reliability depends on eliminating shared risks, not only duplicating network devices” responds to another technical or business failure: A campus design has redundant routers and switches but both power feeds terminate on one supply circuit. That source case depends on: Network reliability depends on eliminating shared risks, not only duplicating network devices. The present issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The more direct action is “Gateway availability and end-to-end network reachability are different reliability properties” because Gateway availability and end-to-end network reachability are different reliability properties.

C:

“Unstable track state can cause repeated virtual-gateway ownership changes” responds to another technical or business failure: A VRRP group flaps repeatedly because upstream connectivity causes tracked priority to alternate around the peer threshold. That source case depends on: Unstable track state can cause repeated virtual-gateway ownership changes. The present issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The more direct action is “Gateway availability and end-to-end network reachability are different reliability properties” because Gateway availability and end-to-end network reachability are different reliability properties.

Question 38

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing VRRP, BFD and redundancy design during a customer network audit (HCIP-H12-821-RELIABILITY-010). The observed network issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. Which ongoing preventive or detective control would best reduce recurrence?

  1. Test member and uplink loss separately in stack design validation.
  2. Include remote service probes in VRRP gateway validation.
  3. Verify VRRP version and group compatibility before device replacements.
  4. Audit power and physical path diversity alongside protocol failover tests.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Include remote service probes in VRRP gateway validation. This directly addresses the recurring fault: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The corrective action would be: Configure suitable upstream route tracking and investigate WAN reachability beyond the LAN gateway. Success is demonstrated when: Failover selects a router with a viable upstream route and restores service connectivity.

Incorrect Answers

A:

“Test member and uplink loss separately in stack design validation” addresses recurrence of another problem: A switch stack offers redundant members but its sole uplink attaches to one device and remains a failure point. That problem depends on: The preventive or detective safeguard is: Test member and uplink loss separately in stack design validation. The recurring risk here is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The more targeted safeguard is “Include remote service probes in VRRP gateway validation” because the preventive or detective safeguard is: Include remote service probes in VRRP gateway validation.

C:

“Verify VRRP version and group compatibility before device replacements” addresses recurrence of another problem: Two VRRP routers advertise the same group but use mismatched authentication or version support settings. That problem depends on: The preventive or detective safeguard is: Verify VRRP version and group compatibility before device replacements. The recurring risk here is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The more targeted safeguard is “Include remote service probes in VRRP gateway validation” because the preventive or detective safeguard is: Include remote service probes in VRRP gateway validation.

D:

“Audit power and physical path diversity alongside protocol failover tests” addresses recurrence of another problem: A campus design has redundant routers and switches but both power feeds terminate on one supply circuit. That problem depends on: The preventive or detective safeguard is: Audit power and physical path diversity alongside protocol failover tests. The recurring risk here is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The more targeted safeguard is “Include remote service probes in VRRP gateway validation” because the preventive or detective safeguard is: Include remote service probes in VRRP gateway validation.

Question 39

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing VRRP, BFD and redundancy design during a customer network audit (HCIP-H12-821-RELIABILITY-010). The observed network issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. Which next engineering action best addresses the reported problem?

  1. Distribute or aggregate uplinks across supported stack members with correct failure design.
  2. Review BFD session negotiation parameters and protocol association at both ends.
  3. Adjust appropriate tracking conditions, hysteresis or delay settings and repair unstable uplink state.
  4. Configure suitable upstream route tracking and investigate WAN reachability beyond the LAN gateway.

Explanation

Correct Answer

D:

The directly responsive action is: Configure suitable upstream route tracking and investigate WAN reachability beyond the LAN gateway. The specific reported fault is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. Confirmation should show: Failover selects a router with a viable upstream route and restores service connectivity. The supporting technical principle is: Gateway availability and end-to-end network reachability are different reliability properties.

Incorrect Answers

A:

“Distribute or aggregate uplinks across supported stack members with correct failure design” responds to another technical or business failure: A switch stack offers redundant members but its sole uplink attaches to one device and remains a failure point. That source case depends on: Hardware redundancy only improves availability when dependent paths are also redundant. The present issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The more direct action is “Configure suitable upstream route tracking and investigate WAN reachability beyond the LAN gateway” because Gateway availability and end-to-end network reachability are different reliability properties.

B:

“Review BFD session negotiation parameters and protocol association at both ends” responds to another technical or business failure: BFD keeps an OSPF neighbor Down even after link restoration because the negotiated intervals or detection multiplier are incompatible. That source case depends on: BFD detection speed depends on compatible transmit and receive timers and multiplier behavior. The present issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The more direct action is “Configure suitable upstream route tracking and investigate WAN reachability beyond the LAN gateway” because Gateway availability and end-to-end network reachability are different reliability properties.

C:

“Adjust appropriate tracking conditions, hysteresis or delay settings and repair unstable uplink state” responds to another technical or business failure: A VRRP group flaps repeatedly because upstream connectivity causes tracked priority to alternate around the peer threshold. That source case depends on: Unstable track state can cause repeated virtual-gateway ownership changes. The present issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The more direct action is “Configure suitable upstream route tracking and investigate WAN reachability beyond the LAN gateway” because Gateway availability and end-to-end network reachability are different reliability properties.

Question 40

At fictional Timberline Operations, a network engineer supporting production campuses is reviewing VRRP, BFD and redundancy design during a customer network audit (HCIP-H12-821-RELIABILITY-010). The observed network issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. Which observation most directly verifies that the corrective change succeeded?

  1. Controlled loss of one supply feed preserves the defined critical forwarding service.
  2. Failover selects a router with a viable upstream route and restores service connectivity.
  3. Gateway mastership remains stable through normal transients and changes on genuine failure.
  4. Loss of the tracked path leads to the intended gateway failover while user hosts retain their virtual address.

Explanation

Correct Answer

B:

The best verification observation is: Failover selects a router with a viable upstream route and restores service connectivity. It demonstrates the corrective action: Configure suitable upstream route tracking and investigate WAN reachability beyond the LAN gateway. This fits the principle: Gateway availability and end-to-end network reachability are different reliability properties. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Controlled loss of one supply feed preserves the defined critical forwarding service” responds to another technical or business failure: A campus design has redundant routers and switches but both power feeds terminate on one supply circuit. That source case depends on: The best verification observation is: Controlled loss of one supply feed preserves the defined critical forwarding service. The present issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The more direct action is “Failover selects a router with a viable upstream route and restores service connectivity” because the best verification observation is: Failover selects a router with a viable upstream route and restores service connectivity.

C:

“Gateway mastership remains stable through normal transients and changes on genuine failure” responds to another technical or business failure: A VRRP group flaps repeatedly because upstream connectivity causes tracked priority to alternate around the peer threshold. That source case depends on: The best verification observation is: Gateway mastership remains stable through normal transients and changes on genuine failure. The present issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The more direct action is “Failover selects a router with a viable upstream route and restores service connectivity” because the best verification observation is: Failover selects a router with a viable upstream route and restores service connectivity.

D:

“Loss of the tracked path leads to the intended gateway failover while user hosts retain their virtual address” responds to another technical or business failure: A VRRP standby router never becomes master after the preferred uplink fails because only the physical LAN interface remains Up. That source case depends on: The best verification observation is: Loss of the tracked path leads to the intended gateway failover while user hosts retain their virtual address. The present issue is: A VRRP virtual IP responds locally but remote services fail because both gateway uplinks have lost their default route. The more direct action is “Failover selects a router with a viable upstream route and restores service connectivity” because the best verification observation is: Failover selects a router with a viable upstream route and restores service connectivity.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests