McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 2

Question 10

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing OSPF area design and link-state convergence during a production cutover (HCIP-H12-821-OSPF-003). The observed network issue is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. Which ongoing preventive or detective control would best reduce recurrence?

  1. Compare area IDs in both directions during OSPF adjacency acceptance.
  2. Check duplicate router IDs in configuration reviews and fault diagnostics.
  3. Inspect both LSDB and routing table when evaluating routing-filter controls.
  4. Check inter-area LSA propagation from each ABR after topology changes.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Check inter-area LSA propagation from each ABR after topology changes. This directly addresses the recurring fault: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. The corrective action would be: Inspect ABR area connectivity and the Type 3 summary LSAs used for inter-area advertisement. Success is demonstrated when: The receiving area learns approved inter-area prefixes through expected summary LSAs.

Incorrect Answers

A:

“Compare area IDs in both directions during OSPF adjacency acceptance” addresses recurrence of another problem: Two neighboring Huawei routers exchange Hello packets but never become OSPF neighbors because their area identifiers differ. That problem depends on: The preventive or detective safeguard is: Compare area IDs in both directions during OSPF adjacency acceptance. The recurring risk here is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. The more targeted safeguard is “Check inter-area LSA propagation from each ABR after topology changes” because the preventive or detective safeguard is: Check inter-area LSA propagation from each ABR after topology changes.

B:

“Check duplicate router IDs in configuration reviews and fault diagnostics” addresses recurrence of another problem: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. That problem depends on: The preventive or detective safeguard is: Check duplicate router IDs in configuration reviews and fault diagnostics. The recurring risk here is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. The more targeted safeguard is “Check inter-area LSA propagation from each ABR after topology changes” because the preventive or detective safeguard is: Check inter-area LSA propagation from each ABR after topology changes.

C:

“Inspect both LSDB and routing table when evaluating routing-filter controls” addresses recurrence of another problem: An engineer uses a prefix-filter on one OSPF router expecting to prevent every other router from receiving the LSA. That problem depends on: The preventive or detective safeguard is: Inspect both LSDB and routing table when evaluating routing-filter controls. The recurring risk here is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. The more targeted safeguard is “Check inter-area LSA propagation from each ABR after topology changes” because the preventive or detective safeguard is: Check inter-area LSA propagation from each ABR after topology changes.

Question 11

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing OSPF area design and link-state convergence during a production cutover (HCIP-H12-821-OSPF-003). The observed network issue is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. Which next engineering action best addresses the reported problem?

  1. Assign a unique stable router ID to the affected routing process and reset the appropriate adjacency.
  2. Select an area type supporting the required local ASBR redistribution and inspect resulting LSA policy.
  3. Inspect ABR area connectivity and the Type 3 summary LSAs used for inter-area advertisement.
  4. Inspect external redistribution configuration, LSA Type 5 generation and area restrictions.

Explanation

Correct Answer

C:

The directly responsive action is: Inspect ABR area connectivity and the Type 3 summary LSAs used for inter-area advertisement. The specific reported fault is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. Confirmation should show: The receiving area learns approved inter-area prefixes through expected summary LSAs. The supporting technical principle is: OSPF area border routers convey inter-area network reachability using summary information.

Incorrect Answers

A:

“Assign a unique stable router ID to the affected routing process and reset the appropriate adjacency” responds to another technical or business failure: OSPF neighbors become stuck in ExStart because both routers are configured with the same router ID. That source case depends on: OSPF routers require unique identifiers for reliable link-state database exchange. The present issue is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. The more direct action is “Inspect ABR area connectivity and the Type 3 summary LSAs used for inter-area advertisement” because OSPF area border routers convey inter-area network reachability using summary information.

B:

“Select an area type supporting the required local ASBR redistribution and inspect resulting LSA policy” responds to another technical or business failure: An engineer designates an OSPF NSSA as a stub to reduce LSAs but unintentionally removes local redistribution. That source case depends on: NSSA and stub areas have different support for originating external routes. The present issue is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. The more direct action is “Inspect ABR area connectivity and the Type 3 summary LSAs used for inter-area advertisement” because OSPF area border routers convey inter-area network reachability using summary information.

D:

“Inspect external redistribution configuration, LSA Type 5 generation and area restrictions” responds to another technical or business failure: An ASBR redistributes a static service subnet but other areas never see its external OSPF destination. That source case depends on: OSPF external routing requires correctly originated and flooded AS-external LSAs. The present issue is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. The more direct action is “Inspect ABR area connectivity and the Type 3 summary LSAs used for inter-area advertisement” because OSPF area border routers convey inter-area network reachability using summary information.

Question 12

At fictional Cedar Retail, a network engineer supporting store connectivity is reviewing OSPF area design and link-state convergence during a production cutover (HCIP-H12-821-OSPF-003). The observed network issue is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. Which observation most directly verifies that the corrective change succeeded?

  1. The new DR or BDR assignment appears only after an appropriate election-triggering event.
  2. The NSSA prefix appears beyond the area as an appropriate translated external route.
  3. The receiving area learns approved inter-area prefixes through expected summary LSAs.
  4. Only intended reachable subnets are forwarded and aggregate black holes are documented or prevented.

Explanation

Correct Answer

C:

The best verification observation is: The receiving area learns approved inter-area prefixes through expected summary LSAs. It demonstrates the corrective action: Inspect ABR area connectivity and the Type 3 summary LSAs used for inter-area advertisement. This fits the principle: OSPF area border routers convey inter-area network reachability using summary information. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The new DR or BDR assignment appears only after an appropriate election-triggering event” responds to another technical or business failure: An OSPF DR election change unexpectedly disrupts traffic because an engineer assumes elections are always preemptive. That source case depends on: The best verification observation is: The new DR or BDR assignment appears only after an appropriate election-triggering event. The present issue is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. The more direct action is “The receiving area learns approved inter-area prefixes through expected summary LSAs” because the best verification observation is: The receiving area learns approved inter-area prefixes through expected summary LSAs.

B:

“The NSSA prefix appears beyond the area as an appropriate translated external route” responds to another technical or business failure: An NSSA branch redistributes a local service prefix but the backbone never receives the route. That source case depends on: The best verification observation is: The NSSA prefix appears beyond the area as an appropriate translated external route. The present issue is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. The more direct action is “The receiving area learns approved inter-area prefixes through expected summary LSAs” because the best verification observation is: The receiving area learns approved inter-area prefixes through expected summary LSAs.

D:

“Only intended reachable subnets are forwarded and aggregate black holes are documented or prevented” responds to another technical or business failure: An OSPF summary aggregate covers a disconnected subnet and an engineer assumes all summarized addresses have valid next hops. That source case depends on: The best verification observation is: Only intended reachable subnets are forwarded and aggregate black holes are documented or prevented. The present issue is: A backbone-connected router receives intra-area LSAs but remote area destinations never appear in its routing table. The more direct action is “The receiving area learns approved inter-area prefixes through expected summary LSAs” because the best verification observation is: The receiving area learns approved inter-area prefixes through expected summary LSAs.

Question 13

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing DHCP and network management during an initial deployment test (HCIP-H12-821-SERVICES-004). The observed network issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. Which ongoing preventive or detective control would best reduce recurrence?

  1. Test DHCP relay behavior after server migration and VLAN changes.
  2. Test SLA thresholds and failover of representative application classes.
  3. Validate SNMPv3 reachability and least-privilege views before monitoring rollout.
  4. Trend OSPF adjacency and SPF event rates alongside interface health.

Explanation

Correct Answer

C:

The preventive or detective safeguard is: Validate SNMPv3 reachability and least-privilege views before monitoring rollout. This directly addresses the recurring fault: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The corrective action would be: Align authorized SNMP version, access control and secure user parameters with the NMS. Success is demonstrated when: Polling reads permitted interface metrics while unauthorized attempts remain rejected.

Incorrect Answers

A:

“Test DHCP relay behavior after server migration and VLAN changes” addresses recurrence of another problem: A DHCP client reaches a relay-enabled interface but receives no address because the relay forwards to an obsolete DHCP server. That problem depends on: The preventive or detective safeguard is: Test DHCP relay behavior after server migration and VLAN changes. The recurring risk here is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The more targeted safeguard is “Validate SNMPv3 reachability and least-privilege views before monitoring rollout” because the preventive or detective safeguard is: Validate SNMPv3 reachability and least-privilege views before monitoring rollout.

B:

“Test SLA thresholds and failover of representative application classes” addresses recurrence of another problem: An SD-WAN design chooses an overlay tunnel for all application flows without observing link quality or SLA objectives. That problem depends on: The preventive or detective safeguard is: Test SLA thresholds and failover of representative application classes. The recurring risk here is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The more targeted safeguard is “Validate SNMPv3 reachability and least-privilege views before monitoring rollout” because the preventive or detective safeguard is: Validate SNMPv3 reachability and least-privilege views before monitoring rollout.

D:

“Trend OSPF adjacency and SPF event rates alongside interface health” addresses recurrence of another problem: A router repeatedly runs SPF after frequent interface state changes and application latency rises. That problem depends on: The preventive or detective safeguard is: Trend OSPF adjacency and SPF event rates alongside interface health. The recurring risk here is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The more targeted safeguard is “Validate SNMPv3 reachability and least-privilege views before monitoring rollout” because the preventive or detective safeguard is: Validate SNMPv3 reachability and least-privilege views before monitoring rollout.

Question 14

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing DHCP and network management during an initial deployment test (HCIP-H12-821-SERVICES-004). The observed network issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. Which routing, switching, or network principle best explains the appropriate solution?

  1. Network management protocols require compatible authentication, permissions and transport.
  2. PIM forwarding state should track downstream interest and prune unused paths.
  3. VRRP priority and preemption behavior are separate configured failover choices.
  4. DHCP relay bridges client broadcast requests to a configured reachable server.

Explanation

Correct Answer

A:

The governing principle is: Network management protocols require compatible authentication, permissions and transport. In this scenario, the appropriate action is: Align authorized SNMP version, access control and secure user parameters with the NMS. Valid evidence would show: Polling reads permitted interface metrics while unauthorized attempts remain rejected.

Incorrect Answers

B:

“PIM forwarding state should track downstream interest and prune unused paths” responds to another technical or business failure: An upstream router continuously forwards multicast after a branch has no receivers because PIM prune information is missing. That source case depends on: PIM forwarding state should track downstream interest and prune unused paths. The present issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The more direct action is “Network management protocols require compatible authentication, permissions and transport” because Network management protocols require compatible authentication, permissions and transport.

C:

“VRRP priority and preemption behavior are separate configured failover choices” responds to another technical or business failure: A maintenance engineer expects a higher-priority VRRP router to take back Master instantly although preemption is disabled. That source case depends on: VRRP priority and preemption behavior are separate configured failover choices. The present issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The more direct action is “Network management protocols require compatible authentication, permissions and transport” because Network management protocols require compatible authentication, permissions and transport.

D:

“DHCP relay bridges client broadcast requests to a configured reachable server” responds to another technical or business failure: A DHCP client reaches a relay-enabled interface but receives no address because the relay forwards to an obsolete DHCP server. That source case depends on: DHCP relay bridges client broadcast requests to a configured reachable server. The present issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The more direct action is “Network management protocols require compatible authentication, permissions and transport” because Network management protocols require compatible authentication, permissions and transport.

Question 15

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing DHCP and network management during an initial deployment test (HCIP-H12-821-SERVICES-004). The observed network issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. Which next engineering action best addresses the reported problem?

  1. Align authorized SNMP version, access control and secure user parameters with the NMS.
  2. Update DHCP gateway options to the valid interface or VRRP virtual IP for that subnet.
  3. Configure the supported eBGP multihop reachability and correct peer addresses with appropriate routing.
  4. Restrict administrative VTY or SSH access to approved management sources with authenticated roles.

Explanation

Correct Answer

A:

The directly responsive action is: Align authorized SNMP version, access control and secure user parameters with the NMS. The specific reported fault is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. Confirmation should show: Polling reads permitted interface metrics while unauthorized attempts remain rejected. The supporting technical principle is: Network management protocols require compatible authentication, permissions and transport.

Incorrect Answers

B:

“Update DHCP gateway options to the valid interface or VRRP virtual IP for that subnet” responds to another technical or business failure: A DHCP pool provides the correct address block but clients cannot route because option 3 advertises the wrong default gateway. That source case depends on: DHCP option delivery configures host network behavior beyond simple address assignment. The present issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The more direct action is “Align authorized SNMP version, access control and secure user parameters with the NMS” because Network management protocols require compatible authentication, permissions and transport.

C:

“Configure the supported eBGP multihop reachability and correct peer addresses with appropriate routing” responds to another technical or business failure: Two eBGP routers attempt to peer over loopback addresses separated by several transit hops using the default one-hop behavior. That source case depends on: EBGP multi-hop peers require explicit control of TTL and loopback reachability. The present issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The more direct action is “Align authorized SNMP version, access control and secure user parameters with the NMS” because Network management protocols require compatible authentication, permissions and transport.

D:

“Restrict administrative VTY or SSH access to approved management sources with authenticated roles” responds to another technical or business failure: An edge router uses a static ACL to protect management traffic but allows device configuration access from all remote subnets. That source case depends on: Management-plane hardening limits access separately from ordinary routed user traffic. The present issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The more direct action is “Align authorized SNMP version, access control and secure user parameters with the NMS” because Network management protocols require compatible authentication, permissions and transport.

Question 16

At fictional Granite Logistics, a network engineer supporting warehouse distribution is reviewing DHCP and network management during an initial deployment test (HCIP-H12-821-SERVICES-004). The observed network issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. Which observation most directly verifies that the corrective change succeeded?

  1. Polling reads permitted interface metrics while unauthorized attempts remain rejected.
  2. The intended service flow changes next hop while other routes retain established egress.
  3. Denied test flows increment the expected counters and permitted traffic still passes.
  4. Clients receive valid leases and can reach authorized off-subnet destinations.

Explanation

Correct Answer

A:

The best verification observation is: Polling reads permitted interface metrics while unauthorized attempts remain rejected. It demonstrates the corrective action: Align authorized SNMP version, access control and secure user parameters with the NMS. This fits the principle: Network management protocols require compatible authentication, permissions and transport. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“The intended service flow changes next hop while other routes retain established egress” responds to another technical or business failure: A dual-provider network expects a routing preference change to affect only one VLAN yet every route in the VRF changes. That source case depends on: The best verification observation is: The intended service flow changes next hop while other routes retain established egress. The present issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The more direct action is “Polling reads permitted interface metrics while unauthorized attempts remain rejected” because the best verification observation is: Polling reads permitted interface metrics while unauthorized attempts remain rejected.

C:

“Denied test flows increment the expected counters and permitted traffic still passes” responds to another technical or business failure: An administrator applies an ACL to an ingress interface in the wrong direction and a blocked flow still reaches servers. That source case depends on: The best verification observation is: Denied test flows increment the expected counters and permitted traffic still passes. The present issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The more direct action is “Polling reads permitted interface metrics while unauthorized attempts remain rejected” because the best verification observation is: Polling reads permitted interface metrics while unauthorized attempts remain rejected.

D:

“Clients receive valid leases and can reach authorized off-subnet destinations” responds to another technical or business failure: A DHCP pool provides the correct address block but clients cannot route because option 3 advertises the wrong default gateway. That source case depends on: The best verification observation is: Clients receive valid leases and can reach authorized off-subnet destinations. The present issue is: A network monitoring system shows no interface counters because SNMP credentials or community scope differs from the Huawei device. The more direct action is “Polling reads permitted interface metrics while unauthorized attempts remain rejected” because the best verification observation is: Polling reads permitted interface metrics while unauthorized attempts remain rejected.

Question 17

At fictional Harbor Media, a network engineer supporting streaming networks is reviewing route-policy and traffic-control behavior during a controlled failover exercise (HCIP-H12-821-POLICY-005). The observed network issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. Which observation most directly verifies that the corrective change succeeded?

  1. Upstream observed updates carry permitted communities and service-specific actions occur.
  2. Controlled traffic shows desired throughput and measured color actions without unexpected loss.
  3. Voice packets hit the intended class and maintain lower delay during controlled congestion.
  4. Only authorized /24 components are accepted and the prohibited aggregates remain excluded.

Explanation

Correct Answer

B:

The best verification observation is: Controlled traffic shows desired throughput and measured color actions without unexpected loss. It demonstrates the corrective action: Recalculate token-bucket parameters and choose intended conform, exceed and violate actions. This fits the principle: Token bucket policers classify traffic using configured rate and burst parameters. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“Upstream observed updates carry permitted communities and service-specific actions occur” responds to another technical or business failure: An outbound route-policy appends a community but the upstream device removes communities when send behavior is disabled. That source case depends on: The best verification observation is: Upstream observed updates carry permitted communities and service-specific actions occur. The present issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The more direct action is “Controlled traffic shows desired throughput and measured color actions without unexpected loss” because the best verification observation is: Controlled traffic shows desired throughput and measured color actions without unexpected loss.

C:

“Voice packets hit the intended class and maintain lower delay during controlled congestion” responds to another technical or business failure: A classifier matches the wrong VLAN priority bits and high-priority voice is treated as bulk data. That source case depends on: The best verification observation is: Voice packets hit the intended class and maintain lower delay during controlled congestion. The present issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The more direct action is “Controlled traffic shows desired throughput and measured color actions without unexpected loss” because the best verification observation is: Controlled traffic shows desired throughput and measured color actions without unexpected loss.

D:

“Only authorized /24 components are accepted and the prohibited aggregates remain excluded” responds to another technical or business failure: A prefix-list denies an entire /16 because its mask range does not include the intended /24 subnet entries. That source case depends on: The best verification observation is: Only authorized /24 components are accepted and the prohibited aggregates remain excluded. The present issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The more direct action is “Controlled traffic shows desired throughput and measured color actions without unexpected loss” because the best verification observation is: Controlled traffic shows desired throughput and measured color actions without unexpected loss.

Question 18

At fictional Harbor Media, a network engineer supporting streaming networks is reviewing route-policy and traffic-control behavior during a controlled failover exercise (HCIP-H12-821-POLICY-005). The observed network issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. Which ongoing preventive or detective control would best reduce recurrence?

  1. Check trust boundary and classification counters before measuring QoS outcome.
  2. Review external route inventory after every redistribution expansion.
  3. Validate policer and shaper action selection against traffic SLAs.
  4. Verify CIR and CBS settings under steady and burst traffic tests.

Explanation

Correct Answer

D:

The preventive or detective safeguard is: Verify CIR and CBS settings under steady and burst traffic tests. This directly addresses the recurring fault: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The corrective action would be: Recalculate token-bucket parameters and choose intended conform, exceed and violate actions. Success is demonstrated when: Controlled traffic shows desired throughput and measured color actions without unexpected loss.

Incorrect Answers

A:

“Check trust boundary and classification counters before measuring QoS outcome” addresses recurrence of another problem: A classifier matches the wrong VLAN priority bits and high-priority voice is treated as bulk data. That problem depends on: The preventive or detective safeguard is: Check trust boundary and classification counters before measuring QoS outcome. The recurring risk here is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The more targeted safeguard is “Verify CIR and CBS settings under steady and burst traffic tests” because the preventive or detective safeguard is: Verify CIR and CBS settings under steady and burst traffic tests.

B:

“Review external route inventory after every redistribution expansion” addresses recurrence of another problem: A site redistributes static routes into OSPF and accidentally advertises a management-only address to every area. That problem depends on: The preventive or detective safeguard is: Review external route inventory after every redistribution expansion. The recurring risk here is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The more targeted safeguard is “Verify CIR and CBS settings under steady and burst traffic tests” because the preventive or detective safeguard is: Verify CIR and CBS settings under steady and burst traffic tests.

C:

“Validate policer and shaper action selection against traffic SLAs” addresses recurrence of another problem: A Huawei MQC behavior applies policing at an uplink but the operator expects it to buffer all excess traffic. That problem depends on: The preventive or detective safeguard is: Validate policer and shaper action selection against traffic SLAs. The recurring risk here is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The more targeted safeguard is “Verify CIR and CBS settings under steady and burst traffic tests” because the preventive or detective safeguard is: Verify CIR and CBS settings under steady and burst traffic tests.

Question 19

At fictional Harbor Media, a network engineer supporting streaming networks is reviewing route-policy and traffic-control behavior during a controlled failover exercise (HCIP-H12-821-POLICY-005). The observed network issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. Which routing, switching, or network principle best explains the appropriate solution?

  1. Token bucket policers classify traffic using configured rate and burst parameters.
  2. Traffic classification must identify real packets before forwarding or QoS behavior is applied.
  3. QoS behavior begins with accurate classification of relevant traffic fields.
  4. ACL enforcement is sensitive to attachment location and traffic direction.

Explanation

Correct Answer

A:

The governing principle is: Token bucket policers classify traffic using configured rate and burst parameters. In this scenario, the appropriate action is: Recalculate token-bucket parameters and choose intended conform, exceed and violate actions. Valid evidence would show: Controlled traffic shows desired throughput and measured color actions without unexpected loss.

Incorrect Answers

B:

“Traffic classification must identify real packets before forwarding or QoS behavior is applied” responds to another technical or business failure: A routing policy references a nonexistent ACL and traffic is still sent down the default path. That source case depends on: Traffic classification must identify real packets before forwarding or QoS behavior is applied. The present issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The more direct action is “Token bucket policers classify traffic using configured rate and burst parameters” because Token bucket policers classify traffic using configured rate and burst parameters.

C:

“QoS behavior begins with accurate classification of relevant traffic fields” responds to another technical or business failure: A classifier matches the wrong VLAN priority bits and high-priority voice is treated as bulk data. That source case depends on: QoS behavior begins with accurate classification of relevant traffic fields. The present issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The more direct action is “Token bucket policers classify traffic using configured rate and burst parameters” because Token bucket policers classify traffic using configured rate and burst parameters.

D:

“ACL enforcement is sensitive to attachment location and traffic direction” responds to another technical or business failure: An administrator applies an ACL to an ingress interface in the wrong direction and a blocked flow still reaches servers. That source case depends on: ACL enforcement is sensitive to attachment location and traffic direction. The present issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The more direct action is “Token bucket policers classify traffic using configured rate and burst parameters” because Token bucket policers classify traffic using configured rate and burst parameters.

Question 20

At fictional Harbor Media, a network engineer supporting streaming networks is reviewing route-policy and traffic-control behavior during a controlled failover exercise (HCIP-H12-821-POLICY-005). The observed network issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. Which next engineering action best addresses the reported problem?

  1. Review route-policy node sequence and permit or deny outcomes for matching and unmatched routes.
  2. Assign the appropriate strict or weighted priority queue behavior with controlled capacity limits.
  3. Recalculate token-bucket parameters and choose intended conform, exceed and violate actions.
  4. Distinguish policing drop or remark actions from shaping that buffers traffic over time.

Explanation

Correct Answer

C:

The directly responsive action is: Recalculate token-bucket parameters and choose intended conform, exceed and violate actions. The specific reported fault is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. Confirmation should show: Controlled traffic shows desired throughput and measured color actions without unexpected loss. The supporting technical principle is: Token bucket policers classify traffic using configured rate and burst parameters.

Incorrect Answers

A:

“Review route-policy node sequence and permit or deny outcomes for matching and unmatched routes” responds to another technical or business failure: A Huawei route-policy matches a prefix but the engineer expects every route passing the first node to continue through later nodes. That source case depends on: Ordered route policies evaluate match conditions and actions rather than combining all nodes indiscriminately. The present issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The more direct action is “Recalculate token-bucket parameters and choose intended conform, exceed and violate actions” because Token bucket policers classify traffic using configured rate and burst parameters.

B:

“Assign the appropriate strict or weighted priority queue behavior with controlled capacity limits” responds to another technical or business failure: A campus egress port uses weighted scheduling but latency-sensitive voice sits behind large bulk transfers. That source case depends on: Egress congestion scheduling determines queuing delay among traffic classes. The present issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The more direct action is “Recalculate token-bucket parameters and choose intended conform, exceed and violate actions” because Token bucket policers classify traffic using configured rate and burst parameters.

D:

“Distinguish policing drop or remark actions from shaping that buffers traffic over time” responds to another technical or business failure: A Huawei MQC behavior applies policing at an uplink but the operator expects it to buffer all excess traffic. That source case depends on: Traffic policing and traffic shaping handle excess rates differently. The present issue is: A WAN traffic policy drops packets after a bandwidth threshold because committed and excess rates were configured incorrectly. The more direct action is “Recalculate token-bucket parameters and choose intended conform, exceed and violate actions” because Token bucket policers classify traffic using configured rate and burst parameters.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests