McAfee Secure

Exam Code: H12-821

Exam Name: HCIP-Datacom-Core Technology V1.0

Certification Provider: Huawei

Huawei H12-821 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

471 Questions & Answers with Testing Engine

"HCIP-Datacom-Core Technology V1.0 Exam", also known as H12-821 exam, is a Huawei certification exam.

Pass your tests with the always up-to-date H12-821 Exam Engine. Your H12-821 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Huawei H12-821 Practice Test 70

Question 690

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing VRRP, BFD and redundancy design during an intersite service activation (HCIP-H12-821-RELIABILITY-173). The observed network issue is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. Which routing, switching, or network principle best explains the appropriate solution?

  1. Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers.
  2. Network reliability depends on eliminating shared risks, not only duplicating network devices.
  3. Fast fault detection is ineffective without a genuinely independent recovery path.
  4. Hardware redundancy only improves availability when dependent paths are also redundant.

Explanation

Correct Answer

A:

The governing principle is: Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers. In this scenario, the appropriate action is: Establish BFD monitoring over the intended adjacency and link its state to routing as supported. Valid evidence would show: The routing session or route promptly reacts when BFD detects forwarding failure.

Incorrect Answers

B:

“Network reliability depends on eliminating shared risks, not only duplicating network devices” responds to another technical or business failure: A campus design has redundant routers and switches but both power feeds terminate on one supply circuit. That source case depends on: Network reliability depends on eliminating shared risks, not only duplicating network devices. The present issue is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. The more direct action is “Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers” because Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers.

C:

“Fast fault detection is ineffective without a genuinely independent recovery path” responds to another technical or business failure: An interface failure is detected rapidly by BFD but the backup route points to the same failed upstream dependency. That source case depends on: Fast fault detection is ineffective without a genuinely independent recovery path. The present issue is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. The more direct action is “Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers” because Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers.

D:

“Hardware redundancy only improves availability when dependent paths are also redundant” responds to another technical or business failure: A switch stack offers redundant members but its sole uplink attaches to one device and remains a failure point. That source case depends on: Hardware redundancy only improves availability when dependent paths are also redundant. The present issue is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. The more direct action is “Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers” because Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers.

Question 691

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing VRRP, BFD and redundancy design during an intersite service activation (HCIP-H12-821-RELIABILITY-173). The observed network issue is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. Which observation most directly verifies that the corrective change succeeded?

  1. The routing session or route promptly reacts when BFD detects forwarding failure.
  2. BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB.
  3. Each router recognizes the intended group advertisements and one stable master remains.
  4. Failure of the primary dependency reroutes traffic through a distinct working backup.

Explanation

Correct Answer

A:

The best verification observation is: The routing session or route promptly reacts when BFD detects forwarding failure. It demonstrates the corrective action: Establish BFD monitoring over the intended adjacency and link its state to routing as supported. This fits the principle: Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers. Verify on the actual Huawei platform and network release.

Incorrect Answers

B:

“BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB” responds to another technical or business failure: A BFD session is Up but a technician assumes that means every destination route through the neighbor is installed. That source case depends on: The best verification observation is: BFD reports peer liveliness while permitted routes are confirmed independently in RIB and FIB. The present issue is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. The more direct action is “The routing session or route promptly reacts when BFD detects forwarding failure” because the best verification observation is: The routing session or route promptly reacts when BFD detects forwarding failure.

C:

“Each router recognizes the intended group advertisements and one stable master remains” responds to another technical or business failure: Two VRRP routers advertise the same group but use mismatched authentication or version support settings. That source case depends on: The best verification observation is: Each router recognizes the intended group advertisements and one stable master remains. The present issue is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. The more direct action is “The routing session or route promptly reacts when BFD detects forwarding failure” because the best verification observation is: The routing session or route promptly reacts when BFD detects forwarding failure.

D:

“Failure of the primary dependency reroutes traffic through a distinct working backup” responds to another technical or business failure: An interface failure is detected rapidly by BFD but the backup route points to the same failed upstream dependency. That source case depends on: The best verification observation is: Failure of the primary dependency reroutes traffic through a distinct working backup. The present issue is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. The more direct action is “The routing session or route promptly reacts when BFD detects forwarding failure” because the best verification observation is: The routing session or route promptly reacts when BFD detects forwarding failure.

Question 692

At fictional Ironbridge Utilities, a network engineer supporting branch services is reviewing VRRP, BFD and redundancy design during an intersite service activation (HCIP-H12-821-RELIABILITY-173). The observed network issue is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. Which next engineering action best addresses the reported problem?

  1. Align supported VRRP version and security or compatibility parameters for the segment.
  2. Align VRRP preemption settings and timing with the intended maintenance policy.
  3. Redesign independent backup next-hop reachability and validate actual alternate path availability.
  4. Establish BFD monitoring over the intended adjacency and link its state to routing as supported.

Explanation

Correct Answer

D:

The directly responsive action is: Establish BFD monitoring over the intended adjacency and link its state to routing as supported. The specific reported fault is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. Confirmation should show: The routing session or route promptly reacts when BFD detects forwarding failure. The supporting technical principle is: Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers.

Incorrect Answers

A:

“Align supported VRRP version and security or compatibility parameters for the segment” responds to another technical or business failure: Two VRRP routers advertise the same group but use mismatched authentication or version support settings. That source case depends on: VRRP members must process compatible advertisements to coordinate gateway state. The present issue is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. The more direct action is “Establish BFD monitoring over the intended adjacency and link its state to routing as supported” because Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers.

B:

“Align VRRP preemption settings and timing with the intended maintenance policy” responds to another technical or business failure: A maintenance engineer expects a higher-priority VRRP router to take back Master instantly although preemption is disabled. That source case depends on: VRRP priority and preemption behavior are separate configured failover choices. The present issue is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. The more direct action is “Establish BFD monitoring over the intended adjacency and link its state to routing as supported” because Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers.

C:

“Redesign independent backup next-hop reachability and validate actual alternate path availability” responds to another technical or business failure: An interface failure is detected rapidly by BFD but the backup route points to the same failed upstream dependency. That source case depends on: Fast fault detection is ineffective without a genuinely independent recovery path. The present issue is: A router forwards to a remote next hop even after its BGP peer's far-end forwarding path is lost, causing slow detection. The more direct action is “Establish BFD monitoring over the intended adjacency and link its state to routing as supported” because Bidirectional Forwarding Detection provides fast failure detection independent of routing protocol timers.

Question 693

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing Huawei network security and VPN isolation during a production cutover (HCIP-H12-821-SECURITY-174). The observed network issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. Which observation most directly verifies that the corrective change succeeded?

  1. The intended DNS flows match controlled rules in both permitted transport modes.
  2. The intended LAN traffic creates a child security association and passes through the tunnel.
  3. Authorized subnet pairs pass and unrelated internal segments remain inaccessible.
  4. Authorized application traffic passes while a controlled unauthorized flow is denied.

Explanation

Correct Answer

B:

The best verification observation is: The intended LAN traffic creates a child security association and passes through the tunnel. It demonstrates the corrective action: Align protected subnet selectors and IPsec transform settings while retaining least-privilege scope. This fits the principle: IKE control-plane success alone does not prove IPsec traffic selectors match. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“The intended DNS flows match controlled rules in both permitted transport modes” responds to another technical or business failure: An edge ACL denies DNS over UDP while applications switch to TCP DNS and an operator considers the hostname filtering complete. That source case depends on: The best verification observation is: The intended DNS flows match controlled rules in both permitted transport modes. The present issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The more direct action is “The intended LAN traffic creates a child security association and passes through the tunnel” because the best verification observation is: The intended LAN traffic creates a child security association and passes through the tunnel.

C:

“Authorized subnet pairs pass and unrelated internal segments remain inaccessible” responds to another technical or business failure: An engineer enables IPsec encryption but never examines whether the protected tunnel permits excessive internal subnet access. That source case depends on: The best verification observation is: Authorized subnet pairs pass and unrelated internal segments remain inaccessible. The present issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The more direct action is “The intended LAN traffic creates a child security association and passes through the tunnel” because the best verification observation is: The intended LAN traffic creates a child security association and passes through the tunnel.

D:

“Authorized application traffic passes while a controlled unauthorized flow is denied” responds to another technical or business failure: A branch firewall permits traffic from a less-trusted zone because a newly added security policy has an overly broad source match. That source case depends on: The best verification observation is: Authorized application traffic passes while a controlled unauthorized flow is denied. The present issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The more direct action is “The intended LAN traffic creates a child security association and passes through the tunnel” because the best verification observation is: The intended LAN traffic creates a child security association and passes through the tunnel.

Question 694

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing Huawei network security and VPN isolation during a production cutover (HCIP-H12-821-SECURITY-174). The observed network issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. Which routing, switching, or network principle best explains the appropriate solution?

  1. VPN tunnel establishment does not by itself guarantee each application uses the intended route.
  2. Security zones reflect interface trust boundaries used by policy evaluation.
  3. Cleartext administrative protocols can expose credentials and control activity.
  4. IKE control-plane success alone does not prove IPsec traffic selectors match.

Explanation

Correct Answer

D:

The governing principle is: IKE control-plane success alone does not prove IPsec traffic selectors match. In this scenario, the appropriate action is: Align protected subnet selectors and IPsec transform settings while retaining least-privilege scope. Valid evidence would show: The intended LAN traffic creates a child security association and passes through the tunnel.

Incorrect Answers

A:

“VPN tunnel establishment does not by itself guarantee each application uses the intended route” responds to another technical or business failure: A remote-access VPN sends sensitive traffic outside the encrypted tunnel because split-tunnel destinations were omitted. That source case depends on: VPN tunnel establishment does not by itself guarantee each application uses the intended route. The present issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The more direct action is “IKE control-plane success alone does not prove IPsec traffic selectors match” because IKE control-plane success alone does not prove IPsec traffic selectors match.

B:

“Security zones reflect interface trust boundaries used by policy evaluation” responds to another technical or business failure: A network places a server in a DMZ but mistakenly assigns its interface to the internal trust zone. That source case depends on: Security zones reflect interface trust boundaries used by policy evaluation. The present issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The more direct action is “IKE control-plane success alone does not prove IPsec traffic selectors match” because IKE control-plane success alone does not prove IPsec traffic selectors match.

C:

“Cleartext administrative protocols can expose credentials and control activity” responds to another technical or business failure: A router uses telnet for administration across an untrusted network and the team assumes its device password makes sessions confidential. That source case depends on: Cleartext administrative protocols can expose credentials and control activity. The present issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The more direct action is “IKE control-plane success alone does not prove IPsec traffic selectors match” because IKE control-plane success alone does not prove IPsec traffic selectors match.

Question 695

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing Huawei network security and VPN isolation during a production cutover (HCIP-H12-821-SECURITY-174). The observed network issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. Which next engineering action best addresses the reported problem?

  1. Replace default credentials and enforce strong role-based management authentication.
  2. Examine stateful session creation, route symmetry and security policies instead of assuming stateless ACL behavior.
  3. Align protected subnet selectors and IPsec transform settings while retaining least-privilege scope.
  4. Inspect zone direction, policy order and matching hit counts for the affected flow.

Explanation

Correct Answer

C:

The directly responsive action is: Align protected subnet selectors and IPsec transform settings while retaining least-privilege scope. The specific reported fault is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. Confirmation should show: The intended LAN traffic creates a child security association and passes through the tunnel. The supporting technical principle is: IKE control-plane success alone does not prove IPsec traffic selectors match.

Incorrect Answers

A:

“Replace default credentials and enforce strong role-based management authentication” responds to another technical or business failure: A Huawei router has default admin credentials on a remotely reachable service and a technician treats protocol encryption as sufficient. That source case depends on: Encrypted transport does not compensate for weak or shared administrative identity. The present issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The more direct action is “Align protected subnet selectors and IPsec transform settings while retaining least-privilege scope” because IKE control-plane success alone does not prove IPsec traffic selectors match.

B:

“Examine stateful session creation, route symmetry and security policies instead of assuming stateless ACL behavior” responds to another technical or business failure: A Huawei firewall blocks a legitimate return packet even though the initiating client request was allowed by a separate ACL. That source case depends on: Stateful firewall enforcement relies on session context distinct from simple packet ACL filtering. The present issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The more direct action is “Align protected subnet selectors and IPsec transform settings while retaining least-privilege scope” because IKE control-plane success alone does not prove IPsec traffic selectors match.

D:

“Inspect zone direction, policy order and matching hit counts for the affected flow” responds to another technical or business failure: A firewall logs allowed connections but its security team cannot tie sessions to intended service policies. That source case depends on: A session can match a higher-priority policy before reaching a later intended rule. The present issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The more direct action is “Align protected subnet selectors and IPsec transform settings while retaining least-privilege scope” because IKE control-plane success alone does not prove IPsec traffic selectors match.

Question 696

At fictional Keystone Hospitality, a network engineer supporting guest services is reviewing Huawei network security and VPN isolation during a production cutover (HCIP-H12-821-SECURITY-174). The observed network issue is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. Which ongoing preventive or detective control would best reduce recurrence?

  1. Audit customer interface-to-VRF and route-leak configuration at onboarding.
  2. Validate source and destination protected subnets in VPN acceptance.
  3. Audit physical interfaces and logical subinterfaces against their assigned zones.
  4. Disable unneeded insecure management services during baseline hardening.

Explanation

Correct Answer

B:

The preventive or detective safeguard is: Validate source and destination protected subnets in VPN acceptance. This directly addresses the recurring fault: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The corrective action would be: Align protected subnet selectors and IPsec transform settings while retaining least-privilege scope. Success is demonstrated when: The intended LAN traffic creates a child security association and passes through the tunnel.

Incorrect Answers

A:

“Audit customer interface-to-VRF and route-leak configuration at onboarding” addresses recurrence of another problem: A routing project combines two customer networks in one global route table, causing overlapping private addresses to collide. That problem depends on: The preventive or detective safeguard is: Audit customer interface-to-VRF and route-leak configuration at onboarding. The recurring risk here is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The more targeted safeguard is “Validate source and destination protected subnets in VPN acceptance” because the preventive or detective safeguard is: Validate source and destination protected subnets in VPN acceptance.

C:

“Audit physical interfaces and logical subinterfaces against their assigned zones” addresses recurrence of another problem: A network places a server in a DMZ but mistakenly assigns its interface to the internal trust zone. That problem depends on: The preventive or detective safeguard is: Audit physical interfaces and logical subinterfaces against their assigned zones. The recurring risk here is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The more targeted safeguard is “Validate source and destination protected subnets in VPN acceptance” because the preventive or detective safeguard is: Validate source and destination protected subnets in VPN acceptance.

D:

“Disable unneeded insecure management services during baseline hardening” addresses recurrence of another problem: A router uses telnet for administration across an untrusted network and the team assumes its device password makes sessions confidential. That problem depends on: The preventive or detective safeguard is: Disable unneeded insecure management services during baseline hardening. The recurring risk here is: An IPsec VPN IKE session succeeds but protected LAN traffic fails because phase-two traffic selectors differ. The more targeted safeguard is “Validate source and destination protected subnets in VPN acceptance” because the preventive or detective safeguard is: Validate source and destination protected subnets in VPN acceptance.

Question 697

At fictional Quayside Education, a network engineer supporting learning sites is reviewing BGP routing, path attributes and EVPN exchange during a planned network scaling change (HCIP-H12-821-BGP-175). The observed network issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. Which ongoing preventive or detective control would best reduce recurrence?

  1. Validate multihomed segment IDs and failover before adding customer circuits.
  2. Test TCP 179 specifically for peering after security policy changes.
  3. State MED scope and exceptions in the multi-provider BGP design.
  4. Validate both reflected path visibility and next-hop recursion on clients.

Explanation

Correct Answer

A:

The preventive or detective safeguard is: Validate multihomed segment IDs and failover before adding customer circuits. This directly addresses the recurring fault: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The corrective action would be: Verify the Ethernet Segment Identifier and designated-forwarder state on intended attachment leaves. Success is demonstrated when: Both attachment nodes agree on the segment identity and permitted designated-forwarder behavior.

Incorrect Answers

B:

“Test TCP 179 specifically for peering after security policy changes” addresses recurrence of another problem: A border router can ping an eBGP peer yet session establishment fails because firewall ACL blocks TCP port 179. That problem depends on: The preventive or detective safeguard is: Test TCP 179 specifically for peering after security policy changes. The recurring risk here is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The more targeted safeguard is “Validate multihomed segment IDs and failover before adding customer circuits” because the preventive or detective safeguard is: Validate multihomed segment IDs and failover before adding customer circuits.

C:

“State MED scope and exceptions in the multi-provider BGP design” addresses recurrence of another problem: A multi-exit BGP neighbor advertises a preferred MED but the local router compares routes from unrelated upstream ASes incorrectly. That problem depends on: The preventive or detective safeguard is: State MED scope and exceptions in the multi-provider BGP design. The recurring risk here is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The more targeted safeguard is “Validate multihomed segment IDs and failover before adding customer circuits” because the preventive or detective safeguard is: Validate multihomed segment IDs and failover before adding customer circuits.

D:

“Validate both reflected path visibility and next-hop recursion on clients” addresses recurrence of another problem: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. That problem depends on: The preventive or detective safeguard is: Validate both reflected path visibility and next-hop recursion on clients. The recurring risk here is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The more targeted safeguard is “Validate multihomed segment IDs and failover before adding customer circuits” because the preventive or detective safeguard is: Validate multihomed segment IDs and failover before adding customer circuits.

Question 698

At fictional Quayside Education, a network engineer supporting learning sites is reviewing BGP routing, path attributes and EVPN exchange during a planned network scaling change (HCIP-H12-821-BGP-175). The observed network issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. Which next engineering action best addresses the reported problem?

  1. Verify RR cluster design and use appropriate cluster IDs for intentional reflection domains.
  2. Verify EVPN Type 2 MAC/IP route origination and import RTs between the VTEPs.
  3. Narrow permitted prefix filters to the approved route set and confirm the aggregate's precise prefix length.
  4. Verify the Ethernet Segment Identifier and designated-forwarder state on intended attachment leaves.

Explanation

Correct Answer

D:

The directly responsive action is: Verify the Ethernet Segment Identifier and designated-forwarder state on intended attachment leaves. The specific reported fault is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. Confirmation should show: Both attachment nodes agree on the segment identity and permitted designated-forwarder behavior. The supporting technical principle is: EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination.

Incorrect Answers

A:

“Verify RR cluster design and use appropriate cluster IDs for intentional reflection domains” responds to another technical or business failure: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. That source case depends on: BGP route reflectors use cluster-list attributes to detect reflection loops. The present issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The more direct action is “Verify the Ethernet Segment Identifier and designated-forwarder state on intended attachment leaves” because EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination.

B:

“Verify EVPN Type 2 MAC/IP route origination and import RTs between the VTEPs” responds to another technical or business failure: A VXLAN VTEP fails to learn a remote host's MAC and IP even though underlay IP reachability is working. That source case depends on: EVPN Type 2 routes distribute endpoint MAC reachability and related IP bindings. The present issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The more direct action is “Verify the Ethernet Segment Identifier and designated-forwarder state on intended attachment leaves” because EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination.

C:

“Narrow permitted prefix filters to the approved route set and confirm the aggregate's precise prefix length” responds to another technical or business failure: An administrator applies an export prefix list at the BGP border but mistakenly filters all networks including a critical aggregate. That source case depends on: BGP outbound prefix filtering controls which NLRI are advertised to external peers. The present issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The more direct action is “Verify the Ethernet Segment Identifier and designated-forwarder state on intended attachment leaves” because EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination.

Question 699

At fictional Quayside Education, a network engineer supporting learning sites is reviewing BGP routing, path attributes and EVPN exchange during a planned network scaling change (HCIP-H12-821-BGP-175). The observed network issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. Which observation most directly verifies that the corrective change succeeded?

  1. RR clients install a usable route with a resolvable forwarding next hop.
  2. Both attachment nodes agree on the segment identity and permitted designated-forwarder behavior.
  3. The control TCP session completes and BGP reaches Established.
  4. Inbound BGP best-path decisions honor the documented MED comparison policy.

Explanation

Correct Answer

B:

The best verification observation is: Both attachment nodes agree on the segment identity and permitted designated-forwarder behavior. It demonstrates the corrective action: Verify the Ethernet Segment Identifier and designated-forwarder state on intended attachment leaves. This fits the principle: EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination. Verify on the actual Huawei platform and network release.

Incorrect Answers

A:

“RR clients install a usable route with a resolvable forwarding next hop” responds to another technical or business failure: A route reflector receives a new external prefix but its clients cannot use the route because the advertised next hop is unreachable. That source case depends on: The best verification observation is: RR clients install a usable route with a resolvable forwarding next hop. The present issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The more direct action is “Both attachment nodes agree on the segment identity and permitted designated-forwarder behavior” because the best verification observation is: Both attachment nodes agree on the segment identity and permitted designated-forwarder behavior.

C:

“The control TCP session completes and BGP reaches Established” responds to another technical or business failure: A border router can ping an eBGP peer yet session establishment fails because firewall ACL blocks TCP port 179. That source case depends on: The best verification observation is: The control TCP session completes and BGP reaches Established. The present issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The more direct action is “Both attachment nodes agree on the segment identity and permitted designated-forwarder behavior” because the best verification observation is: Both attachment nodes agree on the segment identity and permitted designated-forwarder behavior.

D:

“Inbound BGP best-path decisions honor the documented MED comparison policy” responds to another technical or business failure: A multi-exit BGP neighbor advertises a preferred MED but the local router compares routes from unrelated upstream ASes incorrectly. That source case depends on: The best verification observation is: Inbound BGP best-path decisions honor the documented MED comparison policy. The present issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The more direct action is “Both attachment nodes agree on the segment identity and permitted designated-forwarder behavior” because the best verification observation is: Both attachment nodes agree on the segment identity and permitted designated-forwarder behavior.

Question 700

At fictional Quayside Education, a network engineer supporting learning sites is reviewing BGP routing, path attributes and EVPN exchange during a planned network scaling change (HCIP-H12-821-BGP-175). The observed network issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. Which routing, switching, or network principle best explains the appropriate solution?

  1. EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination.
  2. EVPN Type 3 routes can signal inclusive multicast membership for an Ethernet segment.
  3. BGP route reflectors use cluster-list attributes to detect reflection loops.
  4. Route reflection reduces iBGP full-mesh requirements through controlled reflection.

Explanation

Correct Answer

A:

The governing principle is: EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination. In this scenario, the appropriate action is: Verify the Ethernet Segment Identifier and designated-forwarder state on intended attachment leaves. Valid evidence would show: Both attachment nodes agree on the segment identity and permitted designated-forwarder behavior.

Incorrect Answers

B:

“EVPN Type 3 routes can signal inclusive multicast membership for an Ethernet segment” responds to another technical or business failure: A leaf does not learn remote VXLAN flood-list membership because its EVPN Type 3 route is missing. That source case depends on: EVPN Type 3 routes can signal inclusive multicast membership for an Ethernet segment. The present issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The more direct action is “EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination” because EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination.

C:

“BGP route reflectors use cluster-list attributes to detect reflection loops” responds to another technical or business failure: Two route reflectors use an accidental identical cluster identifier across a design where distinct clusters are required. That source case depends on: BGP route reflectors use cluster-list attributes to detect reflection loops. The present issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The more direct action is “EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination” because EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination.

D:

“Route reflection reduces iBGP full-mesh requirements through controlled reflection” responds to another technical or business failure: An enterprise has too many iBGP sessions and introduces a route reflector without identifying its client peers. That source case depends on: Route reflection reduces iBGP full-mesh requirements through controlled reflection. The present issue is: A multihomed EVPN Ethernet segment advertises conflicting identifiers and an engineer assumes all attached devices will suppress duplicates automatically. The more direct action is “EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination” because EVPN multihoming uses Ethernet Segment identification and designated-forwarder coordination.

HCIP-Datacom-Core Technology V1.0 (H12-821) Practice Tests