McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 12

Question 110

Two tenants reuse the same VNI plan in separate routing contexts, but a careless global RT import configuration risks leaking one tenant's advertisements into the other. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Test both positive and negative route-target import outcomes during tenant deployment.
  2. Document loopback allocation and verify its route advertisement during device replacement and uplink maintenance.
  3. Validate distributed gateway placement and VRF association when adding VNIs or leafs.
  4. Validate ESI and link-aggregation consistency whenever replacing a multihoming peer.

Explanation

Correct Answer

A:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Test both positive and negative route-target import outcomes during tenant deployment. Logical tenant separation relies on explicit control-plane route distribution scope, not only shared fabric transport.

Incorrect Answers

B:

Document loopback allocation and verify its route advertisement during device replacement and uplink maintenance. That concerns VTEP loopback source identity stability, while the issue here is EVPN route target tenant import. Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership.

C:

Edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks. However, the present prevention decision is grounded in: Two tenants reuse the same VNI plan in separate routing contexts, but a careless global RT import configuration risks leaking one tenant's advertisements into the other. For this issue, compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership.

D:

Validate ESI and link-aggregation consistency whenever replacing a multihoming peer. Here, route targets mark EVPN VPN route membership and VRF import/export decisions; an established BGP session alone does not authorize all tenant routes.

Question 111

Two racks intend to extend one Layer 2 tenant segment, but their bridge domains map different customer VLANs to unrelated EVPN instances. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment.
  2. EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain.
  3. An EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.
  4. A shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

Explanation

Correct Answer

C:

The decisive cause is an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

Incorrect Answers

A:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

B:

EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain. That concerns EVPN Type 3 inclusive membership for BUM, while the issue here is EVI and bridge domain consistency. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

D:

A shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

Question 112

Two racks intend to extend one Layer 2 tenant segment, but their bridge domains map different customer VLANs to unrelated EVPN instances. Which configuration or operational action MOST directly addresses the problem?

  1. Compare the peer addressing and ASNs on leaf and spine, establish the supported BGP underlay sessions, and verify route installation.
  2. Trace the actual leaf-to-spine adjacencies and restore the reference topology so each leaf has its intended uplinks to the spine set.
  3. Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.
  4. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

Explanation

Correct Answer

D:

In this case, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration. Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated.

Incorrect Answers

A:

Physical link state does not guarantee underlay routes if the intended BGP neighbors or address-family configuration fail. However, the present correction decision is grounded in: Two racks intend to extend one Layer 2 tenant segment, but their bridge domains map different customer VLANs to unrelated EVPN instances. For this issue, inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

B:

Trace the actual leaf-to-spine adjacencies and restore the reference topology so each leaf has its intended uplinks to the spine set. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

C:

Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices. That concerns edge-routed bridging for local gateway rather than EVI and bridge domain consistency. Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated.

Question 113

Two racks intend to extend one Layer 2 tenant segment, but their bridge domains map different customer VLANs to unrelated EVPN instances. The team proposes: Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration. Which data-center or operational principle BEST justifies that choice?

  1. A familiar VLAN name is not sufficient evidence that two attachment circuits share one overlay broadcast domain.
  2. An operational underlay tunnel needs tenant endpoint information from the overlay control plane for efficient known unicast.
  3. A healthy-looking overlay route cannot substitute for timely detection of an unusable transport path.
  4. Control-plane knowledge of a tenant endpoint cannot compensate for a missing transport route to its tunnel endpoint.

Explanation

Correct Answer

A:

Two racks intend to extend one Layer 2 tenant segment, but their bridge domains map different customer VLANs to unrelated EVPN instances. The central principle is a familiar VLAN name is not sufficient evidence that two attachment circuits share one overlay broadcast domain. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

Incorrect Answers

B:

An operational underlay tunnel needs tenant endpoint information from the overlay control plane for efficient known unicast. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

C:

A healthy-looking overlay route cannot substitute for timely detection of an unusable transport path. That concerns underlay failure isolation using BFD and route state rather than EVI and bridge domain consistency. Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated.

D:

Overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

Question 114

Two racks intend to extend one Layer 2 tenant segment, but their bridge domains map different customer VLANs to unrelated EVPN instances. After applying this change—Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.—which observation BEST demonstrates success?

  1. The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service.
  2. A controlled ARP or broadcast discovery test reaches only the intended participating VTEPs while known unicast remains functional.
  3. Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated.
  4. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.

Explanation

Correct Answer

C:

Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated. That tests the recommended change (Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.) against the original case: Two racks intend to extend one Layer 2 tenant segment, but their bridge domains map different customer VLANs to unrelated EVPN instances.

Incorrect Answers

A:

The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service. That concerns ingress VTEP encapsulation and egress decapsulation, while the issue here is EVI and bridge domain consistency. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

B:

EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain. For this issue, inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

D:

Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay. That concerns VXLAN VNI-to-VLAN mapping rather than EVI and bridge domain consistency. Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated.

Question 115

Two racks intend to extend one Layer 2 tenant segment, but their bridge domains map different customer VLANs to unrelated EVPN instances. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Check anycast gateway consistency whenever a tenant virtual network is extended to another rack.
  2. Test both positive and negative route-target import outcomes during tenant deployment.
  3. Maintain a tenant service inventory relating bridge domains, EVPN instances and VNIs.
  4. Validate distributed gateway placement and VRF association when adding VNIs or leafs.

Explanation

Correct Answer

C:

A lasting control should detect the original error before release. Maintain a tenant service inventory relating bridge domains, EVPN instances and VNIs. That is important in this case because an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service. The scenario was: Two racks intend to extend one Layer 2 tenant segment, but their bridge domains map different customer VLANs to unrelated EVPN instances.

Incorrect Answers

A:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. For the current prevention question, the evidence instead states: Two racks intend to extend one Layer 2 tenant segment, but their bridge domains map different customer VLANs to unrelated EVPN instances. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

B:

Test both positive and negative route-target import outcomes during tenant deployment. That concerns EVPN route target tenant import, while the issue here is EVI and bridge domain consistency. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

D:

Validate distributed gateway placement and VRF association when adding VNIs or leafs. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

Question 116

An engineer places servers into the same descriptive VLAN label on separate leafs yet forgets that the EVPN service and bridge-domain mapping must agree. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Underlay path failure detection and route convergence have their own timers and signaling independent of the tenant EVPN service database.
  2. An EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.
  3. EVPN Type 2 routes distribute learned MAC and optionally IP reachability so remote VTEPs can locate a host.
  4. Overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

Explanation

Correct Answer

B:

The fault is not established by a generic firewall symptom alone. An EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

Incorrect Answers

A:

Underlay path failure detection and route convergence have their own timers and signaling independent of the tenant EVPN service database. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

C:

EVPN Type 2 routes distribute learned MAC and optionally IP reachability so remote VTEPs can locate a host. For this issue, inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

D:

This choice would be assessed for a different data-center fabric or Apstra operational situation: An EVPN route to a remote MAC is visible, but the receiving leaf cannot encapsulate traffic because its underlay has no route toward the remote VTEP address. Its decisive constraint is an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

Question 117

An engineer places servers into the same descriptive VLAN label on separate leafs yet forgets that the EVPN service and bridge-domain mapping must agree. Which configuration or operational action MOST directly addresses the problem?

  1. Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.
  2. Inspect the tenant's EVPN Type 3 reachability and import scope, and repair the supported BUM replication membership for its VNI.
  3. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.
  4. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

Explanation

Correct Answer

D:

This action directly fixes the documented constraint: An EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service. Apply it to the reported case: An engineer places servers into the same descriptive VLAN label on separate leafs yet forgets that the EVPN service and bridge-domain mapping must agree. Then verify: Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated.

Incorrect Answers

A:

A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. For this issue, inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

B:

Inspect the tenant's EVPN Type 3 reachability and import scope, and repair the supported BUM replication membership for its VNI. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

C:

Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment. That concerns ingress VTEP encapsulation and egress decapsulation rather than EVI and bridge domain consistency. Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated.

Question 118

An engineer places servers into the same descriptive VLAN label on separate leafs yet forgets that the EVPN service and bridge-domain mapping must agree. The team proposes: Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration. Which data-center or operational principle BEST justifies that choice?

  1. Consistent distributed gateway identity helps preserve endpoint expectations when their physical attachment location changes.
  2. A fabric can route at its edges instead of requiring every tenant packet to hairpin through an unrelated centralized device.
  3. Logical tenant separation relies on explicit control-plane route distribution scope, not only shared fabric transport.
  4. A familiar VLAN name is not sufficient evidence that two attachment circuits share one overlay broadcast domain.

Explanation

Correct Answer

D:

This principle links classification and policy semantics to the relevant failure. A familiar VLAN name is not sufficient evidence that two attachment circuits share one overlay broadcast domain. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service. The remedy under discussion is: Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

Incorrect Answers

A:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. For this issue, inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

B:

A fabric can route at its edges instead of requiring every tenant packet to hairpin through an unrelated centralized device. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

C:

Logical tenant separation relies on explicit control-plane route distribution scope, not only shared fabric transport. That concerns EVPN route target tenant import rather than EVI and bridge domain consistency. Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated.

Question 119

An engineer places servers into the same descriptive VLAN label on separate leafs yet forgets that the EVPN service and bridge-domain mapping must agree. After applying this change—Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.—which observation BEST demonstrates success?

  1. Both intended BGP adjacencies establish and the leaf learns the reachable remote loopback prefixes needed for VXLAN transport.
  2. Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated.
  3. A test flow between leaf-attached hosts follows a supported leaf–spine–leaf path and avoids an unintended transit leaf.
  4. The remote leaf receives the intended MAC/IP reachability route and forwards test unicast to the advertising VTEP.

Explanation

Correct Answer

B:

The criterion directly exercises the affected flow or security object: Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated. The original condition was: An engineer places servers into the same descriptive VLAN label on separate leafs yet forgets that the EVPN service and bridge-domain mapping must agree. The relevant correction is: Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

Incorrect Answers

A:

Both intended BGP adjacencies establish and the leaf learns the reachable remote loopback prefixes needed for VXLAN transport. That concerns BGP underlay adjacency versus established overlay, while the issue here is EVI and bridge domain consistency. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

C:

A test flow between leaf-attached hosts follows a supported leaf–spine–leaf path and avoids an unintended transit leaf. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

D:

The remote leaf receives the intended MAC/IP reachability route and forwards test unicast to the advertising VTEP. That concerns EVPN control-plane MAC location advertisement rather than EVI and bridge domain consistency. Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated.

Question 120

An engineer places servers into the same descriptive VLAN label on separate leafs yet forgets that the EVPN service and bridge-domain mapping must agree. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Audit RD uniqueness and RT import/export as two independent controls during EVPN template changes.
  2. Include encapsulated MTU and every ECMP path in fabric acceptance and upgrade testing.
  3. Maintain a tenant service inventory relating bridge domains, EVPN instances and VNIs.
  4. Monitor underlay loopback reachability separately from EVPN route presence during fabric changes.

Explanation

Correct Answer

C:

This control reduces recurrence of the same class of failure: An EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service. Apply the recurring practice: Maintain a tenant service inventory relating bridge domains, EVPN instances and VNIs. The previous example was: An engineer places servers into the same descriptive VLAN label on separate leafs yet forgets that the EVPN service and bridge-domain mapping must agree.

Incorrect Answers

A:

An EVPN route distinguisher makes BGP VPN NLRI unique across originating contexts; its purpose is distinct from policy-based route import membership. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

B:

Include encapsulated MTU and every ECMP path in fabric acceptance and upgrade testing. That concerns underlay MTU for VXLAN encapsulation, while the issue here is EVI and bridge domain consistency. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

D:

Monitor underlay loopback reachability separately from EVPN route presence during fabric changes. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service. Specifically for the prevention question, the case to validate is: An engineer places servers into the same descriptive VLAN label on separate leafs yet forgets that the EVPN service and bridge-domain mapping must agree.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests