McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 13

Question 120

An engineer places servers into the same descriptive VLAN label on separate leafs yet forgets that the EVPN service and bridge-domain mapping must agree. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Audit RD uniqueness and RT import/export as two independent controls during EVPN template changes.
  2. Include encapsulated MTU and every ECMP path in fabric acceptance and upgrade testing.
  3. Maintain a tenant service inventory relating bridge domains, EVPN instances and VNIs.
  4. Monitor underlay loopback reachability separately from EVPN route presence during fabric changes.

Explanation

Correct Answer

C:

This control reduces recurrence of the same class of failure: An EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service. Apply the recurring practice: Maintain a tenant service inventory relating bridge domains, EVPN instances and VNIs. The previous example was: An engineer places servers into the same descriptive VLAN label on separate leafs yet forgets that the EVPN service and bridge-domain mapping must agree.

Incorrect Answers

A:

An EVPN route distinguisher makes BGP VPN NLRI unique across originating contexts; its purpose is distinct from policy-based route import membership. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service.

B:

Include encapsulated MTU and every ECMP path in fabric acceptance and upgrade testing. That concerns underlay MTU for VXLAN encapsulation, while the issue here is EVI and bridge domain consistency. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.

D:

Monitor underlay loopback reachability separately from EVPN route presence during fabric changes. Here, an EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service. Specifically for the prevention question, the case to validate is: An engineer places servers into the same descriptive VLAN label on separate leafs yet forgets that the EVPN service and bridge-domain mapping must agree.

Question 121

A dual-homed server has links to two leafs but the fabric does not treat them as one EVPN Ethernet segment because ESI configuration differs on the two attachment peers. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.
  2. A shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.
  3. Physical link state does not guarantee underlay routes if the intended BGP neighbors or address-family configuration fail.
  4. An EVPN route distinguisher makes BGP VPN NLRI unique across originating contexts; its purpose is distinct from policy-based route import membership.

Explanation

Correct Answer

B:

A shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment. The two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior.

Incorrect Answers

A:

A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

C:

Physical link state does not guarantee underlay routes if the intended BGP neighbors or address-family configuration fail. However, the present diagnosis decision is grounded in: A dual-homed server has links to two leafs but the fabric does not treat them as one EVPN Ethernet segment because ESI configuration differs on the two attachment peers. For this issue, review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

D:

An EVPN route distinguisher makes BGP VPN NLRI unique across originating contexts; its purpose is distinct from policy-based route import membership. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

Question 122

A dual-homed server has links to two leafs but the fabric does not treat them as one EVPN Ethernet segment because ESI configuration differs on the two attachment peers. Which configuration or operational action MOST directly addresses the problem?

  1. Inspect the tenant's EVPN Type 3 reachability and import scope, and repair the supported BUM replication membership for its VNI.
  2. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.
  3. Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership.
  4. Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

Explanation

Correct Answer

D:

Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes. The target behavior is demonstrated when the two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior.

Incorrect Answers

A:

EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain. For this issue, review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

B:

Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

C:

Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership. That concerns EVPN route target tenant import rather than ethernet segment identifier for multihomed access. The two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior.

Question 123

A dual-homed server has links to two leafs but the fabric does not treat them as one EVPN Ethernet segment because ESI configuration differs on the two attachment peers. The team proposes: Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes. Which data-center or operational principle BEST justifies that choice?

  1. Two physical links alone do not create a coordinated EVPN Ethernet segment.
  2. Multihoming loop prevention depends on segment provenance rather than treating every flood path as independent.
  3. Consistent distributed gateway identity helps preserve endpoint expectations when their physical attachment location changes.
  4. Multi-active endpoint reachability needs coordinated flood forwarding to prevent duplicate delivery on shared segments.

Explanation

Correct Answer

A:

Two physical links alone do not create a coordinated EVPN Ethernet segment. It justifies the proposed change (Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.) for the precise reported case: A dual-homed server has links to two leafs but the fabric does not treat them as one EVPN Ethernet segment because ESI configuration differs on the two attachment peers.

Incorrect Answers

B:

Multihoming loop prevention depends on segment provenance rather than treating every flood path as independent. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

C:

Consistent distributed gateway identity helps preserve endpoint expectations when their physical attachment location changes. That concerns anycast default gateway identity across leafs rather than ethernet segment identifier for multihomed access. The two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior.

D:

EVPN designated-forwarder selection controls eligible BUM forwarding toward a shared Ethernet segment and helps avoid duplicate delivery. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

Question 124

A dual-homed server has links to two leafs but the fabric does not treat them as one EVPN Ethernet segment because ESI configuration differs on the two attachment peers. After applying this change—Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.—which observation BEST demonstrates success?

  1. BGP represents the intended advertisements distinctly and importing VRFs use their authorized route targets rather than RD values alone.
  2. The two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior.
  3. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.
  4. Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated.

Explanation

Correct Answer

B:

The configuration is not validated merely by a successful commit. The two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior. A shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

Incorrect Answers

A:

BGP represents the intended advertisements distinctly and importing VRFs use their authorized route targets rather than RD values alone. That concerns EVPN route distinguisher route uniqueness, while the issue here is ethernet segment identifier for multihomed access. Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

C:

Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

D:

Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated. That concerns EVI and bridge domain consistency rather than ethernet segment identifier for multihomed access. The two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior.

Question 125

A dual-homed server has links to two leafs but the fabric does not treat them as one EVPN Ethernet segment because ESI configuration differs on the two attachment peers. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Check interface state, BGP session state and learned prefix coverage as separate fabric health criteria.
  2. Test both positive and negative route-target import outcomes during tenant deployment.
  3. Validate ESI and link-aggregation consistency whenever replacing a multihoming peer.
  4. Include encapsulated MTU and every ECMP path in fabric acceptance and upgrade testing.

Explanation

Correct Answer

C:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Validate ESI and link-aggregation consistency whenever replacing a multihoming peer. Two physical links alone do not create a coordinated EVPN Ethernet segment.

Incorrect Answers

A:

Physical link state does not guarantee underlay routes if the intended BGP neighbors or address-family configuration fail. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

B:

Test both positive and negative route-target import outcomes during tenant deployment. That concerns EVPN route target tenant import, while the issue here is ethernet segment identifier for multihomed access. Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

D:

Include encapsulated MTU and every ECMP path in fabric acceptance and upgrade testing. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

Question 126

After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. EVPN designated-forwarder selection controls eligible BUM forwarding toward a shared Ethernet segment and helps avoid duplicate delivery.
  2. A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment.
  3. EVPN multihoming uses loop-prevention procedures to avoid forwarding eligible frames back into the Ethernet segment from which they originated.
  4. A shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

Explanation

Correct Answer

D:

The decisive cause is a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment. Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

Incorrect Answers

A:

EVPN designated-forwarder selection controls eligible BUM forwarding toward a shared Ethernet segment and helps avoid duplicate delivery. For the current diagnosis question, the evidence instead states: After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

B:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. That concerns anycast default gateway identity across leafs, while the issue here is ethernet segment identifier for multihomed access. Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

C:

EVPN multihoming uses loop-prevention procedures to avoid forwarding eligible frames back into the Ethernet segment from which they originated. However, the present diagnosis decision is grounded in: After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior. For this issue, review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

Question 127

After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior. Which configuration or operational action MOST directly addresses the problem?

  1. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.
  2. Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.
  3. Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.
  4. Validate unique route distinguisher assignment under the chosen EVPN design while checking route-target policies separately for tenant membership.

Explanation

Correct Answer

C:

In this case, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment. Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes. The two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior.

Incorrect Answers

A:

An EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service. However, the present correction decision is grounded in: After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior. For this issue, review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

B:

Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

D:

The alternative applies to another Juniper security situation: Two VTEPs advertise otherwise identical tenant prefixes, and an engineer reuses route identity assumptions that obscure how BGP can distinguish different originating advertisements. That situation concerns an EVPN route distinguisher makes BGP VPN NLRI unique across originating contexts; its purpose is distinct from policy-based route import membership. Its key condition is a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

Question 128

After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior. The team proposes: Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes. Which data-center or operational principle BEST justifies that choice?

  1. Tunnel reachability for small packets does not prove the transport supports full-size encapsulated application traffic.
  2. The routed fabric foundation depends on working protocol adjacencies and installed prefixes, not merely Ethernet carrier.
  3. Two physical links alone do not create a coordinated EVPN Ethernet segment.
  4. Logical tenant separation relies on explicit control-plane route distribution scope, not only shared fabric transport.

Explanation

Correct Answer

C:

After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior. The central principle is two physical links alone do not create a coordinated EVPN Ethernet segment. Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

Incorrect Answers

A:

VXLAN adds outer transport headers, making the required underlay packet size greater than the original tenant Ethernet payload. However, the present principle decision is grounded in: After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior. For this issue, review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

B:

The routed fabric foundation depends on working protocol adjacencies and installed prefixes, not merely Ethernet carrier. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

D:

Route targets mark EVPN VPN route membership and VRF import/export decisions; an established BGP session alone does not authorize all tenant routes. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

Question 129

After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior. After applying this change—Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.—which observation BEST demonstrates success?

  1. A controlled ARP or broadcast discovery test reaches only the intended participating VTEPs while known unicast remains functional.
  2. The two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior.
  3. A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance.
  4. The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service.

Explanation

Correct Answer

B:

The two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior. That tests the recommended change (Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.) against the original case: After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior.

Incorrect Answers

A:

A controlled ARP or broadcast discovery test reaches only the intended participating VTEPs while known unicast remains functional. That concerns EVPN Type 3 inclusive membership for BUM, while the issue here is ethernet segment identifier for multihomed access. Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

C:

A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance. Here, a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

D:

The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service. That concerns ingress VTEP encapsulation and egress decapsulation rather than ethernet segment identifier for multihomed access. The two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior.

Question 130

After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include DF role and BUM duplication checks in EVPN multihoming change tests.
  2. Check anycast gateway consistency whenever a tenant virtual network is extended to another rack.
  3. Maintain automated checks for VNI service identity during VLAN renumbering and rack expansion.
  4. Validate ESI and link-aggregation consistency whenever replacing a multihoming peer.

Explanation

Correct Answer

D:

A lasting control should detect the original error before release. Validate ESI and link-aggregation consistency whenever replacing a multihoming peer. That is important in this case because a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment. The scenario was: After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior.

Incorrect Answers

A:

The alternative applies to another Juniper security situation: An operator studies the two uplinks of a dual-attached rack and expects both leafs to forward every broadcast copy without considering designated-forwarder responsibilities. That situation concerns eVPN designated-forwarder selection controls eligible BUM forwarding toward a shared Ethernet segment and helps avoid duplicate delivery. Its key condition is a shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.

B:

Check anycast gateway consistency whenever a tenant virtual network is extended to another rack. That concerns anycast default gateway identity across leafs, while the issue here is ethernet segment identifier for multihomed access. Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes. Specifically for the prevention question, the case to validate is: After replacing a leaf, a customer LAG is wired to the new pair but the second leaf advertises an unrelated Ethernet segment identifier, weakening the expected multihoming behavior.

C:

A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. For this issue, review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests