McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 15

Question 140

An operator studies the two uplinks of a dual-attached rack and expects both leafs to forward every broadcast copy without considering designated-forwarder responsibilities. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Evaluate ECMP using diverse realistic flows and per-path counters rather than a single stream.
  2. Include encapsulated MTU and every ECMP path in fabric acceptance and upgrade testing.
  3. Include DF role and BUM duplication checks in EVPN multihoming change tests.
  4. Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations.

Explanation

Correct Answer

C:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Include DF role and BUM duplication checks in EVPN multihoming change tests. Multi-active endpoint reachability needs coordinated flood forwarding to prevent duplicate delivery on shared segments.

Incorrect Answers

A:

Common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop. Here, eVPN designated-forwarder selection controls eligible BUM forwarding toward a shared Ethernet segment and helps avoid duplicate delivery.

B:

Include encapsulated MTU and every ECMP path in fabric acceptance and upgrade testing. That concerns underlay MTU for VXLAN encapsulation, while the issue here is EVPN designated forwarder for BUM traffic. Inspect the supported DF election and Ethernet-segment role state, then correct inconsistent multihoming membership or election inputs.

D:

Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations. Here, eVPN designated-forwarder selection controls eligible BUM forwarding toward a shared Ethernet segment and helps avoid duplicate delivery.

Question 141

A host sends a packet to its default gateway, but the design hairpins every inter-VLAN flow to a distant central router even though edge-routed bridging was planned. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.
  2. An EVPN route distinguisher makes BGP VPN NLRI unique across originating contexts; its purpose is distinct from policy-based route import membership.
  3. VXLAN adds outer transport headers, making the required underlay packet size greater than the original tenant Ethernet payload.
  4. EVPN multihoming uses loop-prevention procedures to avoid forwarding eligible frames back into the Ethernet segment from which they originated.

Explanation

Correct Answer

A:

The decisive cause is edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks. Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

Incorrect Answers

B:

An EVPN route distinguisher makes BGP VPN NLRI unique across originating contexts; its purpose is distinct from policy-based route import membership. That concerns EVPN route distinguisher route uniqueness, while the issue here is edge-routed bridging for local gateway. Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

C:

VXLAN adds outer transport headers, making the required underlay packet size greater than the original tenant Ethernet payload. For this issue, verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

D:

EVPN multihoming uses loop-prevention procedures to avoid forwarding eligible frames back into the Ethernet segment from which they originated. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

Question 142

A host sends a packet to its default gateway, but the design hairpins every inter-VLAN flow to a distant central router even though edge-routed bridging was planned. Which configuration or operational action MOST directly addresses the problem?

  1. Inspect the EVPN instance, local bridge-domain membership and intended VNI mappings on both leafs; align the supported tenant service configuration.
  2. Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.
  3. Verify local MAC learning, the advertised EVPN Type 2 route, route-target import and remote forwarding installation for the tenant VNI.
  4. Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

Explanation

Correct Answer

B:

In this case, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks. Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices. A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance.

Incorrect Answers

A:

An EVPN instance and its bridge-domain/VNI mappings define which local attachment circuits participate in the same bridged overlay service. For this issue, verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

C:

Verify local MAC learning, the advertised EVPN Type 2 route, route-target import and remote forwarding installation for the tenant VNI. That concerns EVPN control-plane MAC location advertisement rather than edge-routed bridging for local gateway. A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance.

D:

Overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

Question 143

A host sends a packet to its default gateway, but the design hairpins every inter-VLAN flow to a distant central router even though edge-routed bridging was planned. The team proposes: Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices. Which data-center or operational principle BEST justifies that choice?

  1. Local attachment labels and the overlay's network identifier must align to avoid apparent tenant connectivity with the wrong segment.
  2. The routed fabric foundation depends on working protocol adjacencies and installed prefixes, not merely Ethernet carrier.
  3. A VXLAN transport packet carries an inner tenant frame; both transport reachability and egress service mapping are required.
  4. A fabric can route at its edges instead of requiring every tenant packet to hairpin through an unrelated centralized device.

Explanation

Correct Answer

D:

A host sends a packet to its default gateway, but the design hairpins every inter-VLAN flow to a distant central router even though edge-routed bridging was planned. The central principle is a fabric can route at its edges instead of requiring every tenant packet to hairpin through an unrelated centralized device. Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

Incorrect Answers

A:

A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. For this issue, verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

B:

The routed fabric foundation depends on working protocol adjacencies and installed prefixes, not merely Ethernet carrier. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

C:

A VXLAN transport packet carries an inner tenant frame; both transport reachability and egress service mapping are required. That concerns ingress VTEP encapsulation and egress decapsulation rather than edge-routed bridging for local gateway. A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance.

Question 144

A host sends a packet to its default gateway, but the design hairpins every inter-VLAN flow to a distant central router even though edge-routed bridging was planned. After applying this change—Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.—which observation BEST demonstrates success?

  1. A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance.
  2. Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink.
  3. A controlled flow to the moved virtual machine converges to the new VTEP without permanent forwarding to its old attachment.
  4. A representative maximum-size tenant transfer succeeds over each selected spine path without underlay oversize drops.

Explanation

Correct Answer

A:

A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance. That tests the recommended change (Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.) against the original case: A host sends a packet to its default gateway, but the design hairpins every inter-VLAN flow to a distant central router even though edge-routed bridging was planned.

Incorrect Answers

B:

A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface. For this issue, verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

C:

A controlled flow to the moved virtual machine converges to the new VTEP without permanent forwarding to its old attachment. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

D:

A representative maximum-size tenant transfer succeeds over each selected spine path without underlay oversize drops. That concerns underlay MTU for VXLAN encapsulation rather than edge-routed bridging for local gateway. A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance.

Question 145

A host sends a packet to its default gateway, but the design hairpins every inter-VLAN flow to a distant central router even though edge-routed bridging was planned. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Check anycast gateway consistency whenever a tenant virtual network is extended to another rack.
  2. Include route type and tenant VRF checks in intersubnet rollout procedures.
  3. Validate distributed gateway placement and VRF association when adding VNIs or leafs.
  4. Monitor underlay loopback reachability separately from EVPN route presence during fabric changes.

Explanation

Correct Answer

C:

A lasting control should detect the original error before release. Validate distributed gateway placement and VRF association when adding VNIs or leafs. That is important in this case because edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks. The scenario was: A host sends a packet to its default gateway, but the design hairpins every inter-VLAN flow to a distant central router even though edge-routed bridging was planned.

Incorrect Answers

A:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

B:

Include route type and tenant VRF checks in intersubnet rollout procedures. That concerns EVPN Type 5 routed prefix reachability, while the issue here is edge-routed bridging for local gateway. Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

D:

Monitor underlay loopback reachability separately from EVPN route presence during fabric changes. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

Question 146

A new leaf hosts several tenant subnets and the team cannot identify the expected IRB or gateway function near the endpoints for the routed EVPN service. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.
  2. Physical link state does not guarantee underlay routes if the intended BGP neighbors or address-family configuration fail.
  3. Edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.
  4. A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

Explanation

Correct Answer

C:

The fault is not established by a generic firewall symptom alone. Edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks. Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

Incorrect Answers

A:

VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

B:

Physical link state does not guarantee underlay routes if the intended BGP neighbors or address-family configuration fail. That concerns BGP underlay adjacency versus established overlay, while the issue here is edge-routed bridging for local gateway. Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

D:

A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

Question 147

A new leaf hosts several tenant subnets and the team cannot identify the expected IRB or gateway function near the endpoints for the routed EVPN service. Which configuration or operational action MOST directly addresses the problem?

  1. Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.
  2. Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.
  3. Inspect MAC learning, the mobile endpoint's EVPN advertisements and remote forwarding state, then resolve any stale route or move-detection problem.
  4. Measure encapsulation overhead and configure a consistent supported underlay MTU, or constrain overlay payload sizes according to the design.

Explanation

Correct Answer

B:

This action directly fixes the documented constraint: Edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks. Apply it to the reported case: A new leaf hosts several tenant subnets and the team cannot identify the expected IRB or gateway function near the endpoints for the routed EVPN service. Then verify: A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance.

Incorrect Answers

A:

A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface. However, the present correction decision is grounded in: A new leaf hosts several tenant subnets and the team cannot identify the expected IRB or gateway function near the endpoints for the routed EVPN service. For this issue, verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

C:

Inspect MAC learning, the mobile endpoint's EVPN advertisements and remote forwarding state, then resolve any stale route or move-detection problem. That concerns EVPN MAC mobility after virtual machine relocation rather than edge-routed bridging for local gateway. A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance.

D:

VXLAN adds outer transport headers, making the required underlay packet size greater than the original tenant Ethernet payload. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

Question 148

A new leaf hosts several tenant subnets and the team cannot identify the expected IRB or gateway function near the endpoints for the routed EVPN service. The team proposes: Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices. Which data-center or operational principle BEST justifies that choice?

  1. Consistent distributed gateway identity helps preserve endpoint expectations when their physical attachment location changes.
  2. Layer 3 overlay prefix distribution and Layer 2 endpoint signaling solve different forwarding problems.
  3. A fabric can route at its edges instead of requiring every tenant packet to hairpin through an unrelated centralized device.
  4. Control-plane knowledge of a tenant endpoint cannot compensate for a missing transport route to its tunnel endpoint.

Explanation

Correct Answer

C:

This principle links classification and policy semantics to the relevant failure. A fabric can route at its edges instead of requiring every tenant packet to hairpin through an unrelated centralized device. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks. The remedy under discussion is: Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

Incorrect Answers

A:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. For this issue, verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

B:

Layer 3 overlay prefix distribution and Layer 2 endpoint signaling solve different forwarding problems. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

D:

The alternative applies to another Juniper security situation: An EVPN route to a remote MAC is visible, but the receiving leaf cannot encapsulate traffic because its underlay has no route toward the remote VTEP address. That situation concerns overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane. Its key condition is edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

Question 149

A new leaf hosts several tenant subnets and the team cannot identify the expected IRB or gateway function near the endpoints for the routed EVPN service. After applying this change—Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.—which observation BEST demonstrates success?

  1. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.
  2. The remote leaf receives the intended MAC/IP reachability route and forwards test unicast to the advertising VTEP.
  3. Only the intended receiving VRFs import the remote EVPN routes, while a deliberate unrelated tenant import test remains isolated.
  4. A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance.

Explanation

Correct Answer

D:

The criterion directly exercises the affected flow or security object: A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance. The original condition was: A new leaf hosts several tenant subnets and the team cannot identify the expected IRB or gateway function near the endpoints for the routed EVPN service. The relevant correction is: Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

Incorrect Answers

A:

Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay. That concerns VXLAN VNI-to-VLAN mapping, while the issue here is edge-routed bridging for local gateway. Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

B:

EVPN Type 2 routes distribute learned MAC and optionally IP reachability so remote VTEPs can locate a host. For this issue, verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

C:

Only the intended receiving VRFs import the remote EVPN routes, while a deliberate unrelated tenant import test remains isolated. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

Question 150

A new leaf hosts several tenant subnets and the team cannot identify the expected IRB or gateway function near the endpoints for the routed EVPN service. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include encapsulation/decapsulation and VNI validation in packet-level overlay fault isolation.
  2. Validate distributed gateway placement and VRF association when adding VNIs or leafs.
  3. Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations.
  4. Check interface state, BGP session state and learned prefix coverage as separate fabric health criteria.

Explanation

Correct Answer

B:

This control reduces recurrence of the same class of failure: Edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks. Apply the recurring practice: Validate distributed gateway placement and VRF association when adding VNIs or leafs. The previous example was: A new leaf hosts several tenant subnets and the team cannot identify the expected IRB or gateway function near the endpoints for the routed EVPN service.

Incorrect Answers

A:

The alternative applies to another Juniper security situation: A remote VTEP receives encapsulated traffic for a configured VNI but does not deliver it locally because its service mapping fails at decapsulation. That situation concerns vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. Its key condition is edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

C:

EVPN control-plane MAC mobility handling updates the advertised endpoint location and withdraws or supersedes stale location information. For this issue, verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

D:

Check interface state, BGP session state and learned prefix coverage as separate fabric health criteria. Here, edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests