McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 17

Question 160

A team configures independent tenant gateway identities on each leaf and then expects seamless mobility across one EVPN virtual network. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Evaluate ECMP using diverse realistic flows and per-path counters rather than a single stream.
  2. Include encapsulation/decapsulation and VNI validation in packet-level overlay fault isolation.
  3. Check anycast gateway consistency whenever a tenant virtual network is extended to another rack.
  4. Include route type and tenant VRF checks in intersubnet rollout procedures.

Explanation

Correct Answer

C:

A lasting control should detect the original error before release. Check anycast gateway consistency whenever a tenant virtual network is extended to another rack. That is important in this case because a distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. The scenario was: A team configures independent tenant gateway identities on each leaf and then expects seamless mobility across one EVPN virtual network.

Incorrect Answers

A:

Common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop. Here, a distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment.

B:

Include encapsulation/decapsulation and VNI validation in packet-level overlay fault isolation. That concerns ingress VTEP encapsulation and egress decapsulation, while the issue here is anycast default gateway identity across leafs. Compare approved shared gateway address and MAC behavior on the relevant IRB interfaces, then test host mobility and local L3 forwarding. Specifically for the prevention question, the case to validate is: A team configures independent tenant gateway identities on each leaf and then expects seamless mobility across one EVPN virtual network.

D:

Include route type and tenant VRF checks in intersubnet rollout procedures. Here, a distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment.

Question 161

Two EVPN leafs exchange overlay routes successfully, but one maps the intended tenant VLAN to VNI 10400 and the other maps the same service to VNI 10500. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.
  2. An EVPN route distinguisher makes BGP VPN NLRI unique across originating contexts; its purpose is distinct from policy-based route import membership.
  3. Edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.
  4. EVPN control-plane MAC mobility handling updates the advertised endpoint location and withdraws or supersedes stale location information.

Explanation

Correct Answer

A:

The fault is not established by a generic firewall symptom alone. A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

Incorrect Answers

B:

An EVPN route distinguisher makes BGP VPN NLRI unique across originating contexts; its purpose is distinct from policy-based route import membership. That concerns EVPN route distinguisher route uniqueness, while the issue here is VXLAN VNI-to-VLAN mapping. Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

C:

Edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks. For this issue, compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

D:

EVPN control-plane MAC mobility handling updates the advertised endpoint location and withdraws or supersedes stale location information. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

Question 162

Two EVPN leafs exchange overlay routes successfully, but one maps the intended tenant VLAN to VNI 10400 and the other maps the same service to VNI 10500. Which configuration or operational action MOST directly addresses the problem?

  1. Correlate interface errors, supported BFD or routing-neighbor state and route withdrawal, then correct the underlay fault and validate recovery.
  2. Verify local MAC learning, the advertised EVPN Type 2 route, route-target import and remote forwarding installation for the tenant VNI.
  3. Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership.
  4. Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

Explanation

Correct Answer

D:

This action directly fixes the documented constraint: A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. Apply it to the reported case: Two EVPN leafs exchange overlay routes successfully, but one maps the intended tenant VLAN to VNI 10400 and the other maps the same service to VNI 10500. Then verify: Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.

Incorrect Answers

A:

Underlay path failure detection and route convergence have their own timers and signaling independent of the tenant EVPN service database. For this issue, compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

B:

Verify local MAC learning, the advertised EVPN Type 2 route, route-target import and remote forwarding installation for the tenant VNI. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

C:

Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership. That concerns EVPN route target tenant import rather than VXLAN VNI-to-VLAN mapping. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.

Question 163

Two EVPN leafs exchange overlay routes successfully, but one maps the intended tenant VLAN to VNI 10400 and the other maps the same service to VNI 10500. The team proposes: Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping. Which data-center or operational principle BEST justifies that choice?

  1. Tenant flood membership is a separate control-plane requirement from individual host MAC advertisement.
  2. Local attachment labels and the overlay's network identifier must align to avoid apparent tenant connectivity with the wrong segment.
  3. Layer 3 overlay prefix distribution and Layer 2 endpoint signaling solve different forwarding problems.
  4. Predictable multi-path connectivity comes from the consistent Clos role hierarchy rather than ad hoc leaf transit.

Explanation

Correct Answer

B:

This principle links classification and policy semantics to the relevant failure. Local attachment labels and the overlay's network identifier must align to avoid apparent tenant connectivity with the wrong segment. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. The remedy under discussion is: Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

Incorrect Answers

A:

EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain. For this issue, compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

C:

Layer 3 overlay prefix distribution and Layer 2 endpoint signaling solve different forwarding problems. That concerns EVPN Type 5 routed prefix reachability rather than VXLAN VNI-to-VLAN mapping. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.

D:

In a conventional leaf–spine Clos fabric, interleaf traffic normally crosses an available spine while servers attach at the leaf edge. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

Question 164

Two EVPN leafs exchange overlay routes successfully, but one maps the intended tenant VLAN to VNI 10400 and the other maps the same service to VNI 10500. After applying this change—Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.—which observation BEST demonstrates success?

  1. A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance.
  2. The controlled frame reaches legitimate remote segments without returning to its originating shared attachment.
  3. A moved endpoint retains the expected gateway identity and authorized routed connectivity from either participating leaf.
  4. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.

Explanation

Correct Answer

D:

The criterion directly exercises the affected flow or security object: Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay. The original condition was: Two EVPN leafs exchange overlay routes successfully, but one maps the intended tenant VLAN to VNI 10400 and the other maps the same service to VNI 10500. The relevant correction is: Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

Incorrect Answers

A:

A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance. That concerns edge-routed bridging for local gateway, while the issue here is VXLAN VNI-to-VLAN mapping. Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

B:

EVPN multihoming uses loop-prevention procedures to avoid forwarding eligible frames back into the Ethernet segment from which they originated. For this issue, compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

C:

A moved endpoint retains the expected gateway identity and authorized routed connectivity from either participating leaf. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

Question 165

Two EVPN leafs exchange overlay routes successfully, but one maps the intended tenant VLAN to VNI 10400 and the other maps the same service to VNI 10500. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Audit RD uniqueness and RT import/export as two independent controls during EVPN template changes.
  2. Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations.
  3. Test both positive and negative route-target import outcomes during tenant deployment.
  4. Maintain automated checks for VNI service identity during VLAN renumbering and rack expansion.

Explanation

Correct Answer

D:

This control reduces recurrence of the same class of failure: A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. Apply the recurring practice: Maintain automated checks for VNI service identity during VLAN renumbering and rack expansion. The previous example was: Two EVPN leafs exchange overlay routes successfully, but one maps the intended tenant VLAN to VNI 10400 and the other maps the same service to VNI 10500.

Incorrect Answers

A:

An EVPN route distinguisher makes BGP VPN NLRI unique across originating contexts; its purpose is distinct from policy-based route import membership. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

B:

Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations. That concerns EVPN MAC mobility after virtual machine relocation, while the issue here is VXLAN VNI-to-VLAN mapping. Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

C:

Route targets mark EVPN VPN route membership and VRF import/export decisions; an established BGP session alone does not authorize all tenant routes. For this issue, compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

Question 166

A rack migration moves several servers onto new Junos interfaces and the engineer copies the VLAN number but misses the configured VXLAN network identifier. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain.
  2. EVPN Type 5 routes can carry IP prefix reachability for routed overlays independently of individual MAC/IP Type 2 host advertisements.
  3. In a conventional leaf–spine Clos fabric, interleaf traffic normally crosses an available spine while servers attach at the leaf edge.
  4. A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

Explanation

Correct Answer

D:

A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.

Incorrect Answers

A:

EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

B:

EVPN Type 5 routes can carry IP prefix reachability for routed overlays independently of individual MAC/IP Type 2 host advertisements. That concerns EVPN Type 5 routed prefix reachability, while the issue here is VXLAN VNI-to-VLAN mapping. Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

C:

In a conventional leaf–spine Clos fabric, interleaf traffic normally crosses an available spine while servers attach at the leaf edge. For this issue, compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

Question 167

A rack migration moves several servers onto new Junos interfaces and the engineer copies the VLAN number but misses the configured VXLAN network identifier. Which configuration or operational action MOST directly addresses the problem?

  1. Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.
  2. Compare approved shared gateway address and MAC behavior on the relevant IRB interfaces, then test host mobility and local L3 forwarding.
  3. Verify the supported ESI split-horizon and multihoming forwarding state, and correct mismatched peer membership before adding broader flood permissions.
  4. Verify the tenant's IRB or gateway configuration, VRF association and EVPN routed reachability on eligible leaf devices.

Explanation

Correct Answer

A:

Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping. The target behavior is demonstrated when traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.

Incorrect Answers

B:

Compare approved shared gateway address and MAC behavior on the relevant IRB interfaces, then test host mobility and local L3 forwarding. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

C:

Verify the supported ESI split-horizon and multihoming forwarding state, and correct mismatched peer membership before adding broader flood permissions. That concerns EVPN multihoming split-horizon behavior rather than VXLAN VNI-to-VLAN mapping. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.

D:

Edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

Question 168

A rack migration moves several servers onto new Junos interfaces and the engineer copies the VLAN number but misses the configured VXLAN network identifier. The team proposes: Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping. Which data-center or operational principle BEST justifies that choice?

  1. Tenant endpoint mobility changes overlay location information even when the underlying IP fabric topology stays unchanged.
  2. Logical tenant separation relies on explicit control-plane route distribution scope, not only shared fabric transport.
  3. Route identity and route distribution policy must not be treated as the same EVPN field.
  4. Local attachment labels and the overlay's network identifier must align to avoid apparent tenant connectivity with the wrong segment.

Explanation

Correct Answer

D:

Local attachment labels and the overlay's network identifier must align to avoid apparent tenant connectivity with the wrong segment. It justifies the proposed change (Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.) for the precise reported case: A rack migration moves several servers onto new Junos interfaces and the engineer copies the VLAN number but misses the configured VXLAN network identifier.

Incorrect Answers

A:

EVPN control-plane MAC mobility handling updates the advertised endpoint location and withdraws or supersedes stale location information. For this issue, compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

B:

Logical tenant separation relies on explicit control-plane route distribution scope, not only shared fabric transport. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

C:

Route identity and route distribution policy must not be treated as the same EVPN field. That concerns EVPN route distinguisher route uniqueness rather than VXLAN VNI-to-VLAN mapping. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.

Question 169

A rack migration moves several servers onto new Junos interfaces and the engineer copies the VLAN number but misses the configured VXLAN network identifier. After applying this change—Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.—which observation BEST demonstrates success?

  1. A test flow between leaf-attached hosts follows a supported leaf–spine–leaf path and avoids an unintended transit leaf.
  2. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.
  3. A bounded broadcast test arrives at the shared attachment once per intended frame and DF status matches the effective forwarding role.
  4. The remote leaf receives the intended MAC/IP reachability route and forwards test unicast to the advertising VTEP.

Explanation

Correct Answer

B:

The configuration is not validated merely by a successful commit. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay. A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

Incorrect Answers

A:

A test flow between leaf-attached hosts follows a supported leaf–spine–leaf path and avoids an unintended transit leaf. That concerns leaf–spine predictable hop count, while the issue here is VXLAN VNI-to-VLAN mapping. Compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

C:

A bounded broadcast test arrives at the shared attachment once per intended frame and DF status matches the effective forwarding role. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

D:

The remote leaf receives the intended MAC/IP reachability route and forwards test unicast to the advertising VTEP. That concerns EVPN control-plane MAC location advertisement rather than VXLAN VNI-to-VLAN mapping. Traffic between authorized endpoints enters the expected VNI from both racks without crossing into another tenant overlay.

Question 170

A rack migration moves several servers onto new Junos interfaces and the engineer copies the VLAN number but misses the configured VXLAN network identifier. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include encapsulation/decapsulation and VNI validation in packet-level overlay fault isolation.
  2. Maintain automated checks for VNI service identity during VLAN renumbering and rack expansion.
  3. Check anycast gateway consistency whenever a tenant virtual network is extended to another rack.
  4. Validate ESI and link-aggregation consistency whenever replacing a multihoming peer.

Explanation

Correct Answer

B:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Maintain automated checks for VNI service identity during VLAN renumbering and rack expansion. Local attachment labels and the overlay's network identifier must align to avoid apparent tenant connectivity with the wrong segment.

Incorrect Answers

A:

VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

C:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. For this issue, compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

D:

Validate ESI and link-aggregation consistency whenever replacing a multihoming peer. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests