McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 18

Question 170

A rack migration moves several servers onto new Junos interfaces and the engineer copies the VLAN number but misses the configured VXLAN network identifier. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include encapsulation/decapsulation and VNI validation in packet-level overlay fault isolation.
  2. Maintain automated checks for VNI service identity during VLAN renumbering and rack expansion.
  3. Check anycast gateway consistency whenever a tenant virtual network is extended to another rack.
  4. Validate ESI and link-aggregation consistency whenever replacing a multihoming peer.

Explanation

Correct Answer

B:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Maintain automated checks for VNI service identity during VLAN renumbering and rack expansion. Local attachment labels and the overlay's network identifier must align to avoid apparent tenant connectivity with the wrong segment.

Incorrect Answers

A:

VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

C:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. For this issue, compare each local VLAN-to-VNI association and the tenant's intended EVPN service, then correct the mismatched mapping.

D:

Validate ESI and link-aggregation consistency whenever replacing a multihoming peer. Here, a VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

Question 171

A captured underlay packet shows an outer IP and UDP header surrounding a tenant Ethernet frame, and an engineer interprets it as a second application session rather than VXLAN transport. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.
  2. A shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment.
  3. A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment.
  4. Underlay path failure detection and route convergence have their own timers and signaling independent of the tenant EVPN service database.

Explanation

Correct Answer

A:

The decisive cause is vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

Incorrect Answers

B:

A shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment. That concerns ethernet segment identifier for multihomed access, while the issue here is ingress VTEP encapsulation and egress decapsulation. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

C:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. For this issue, trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

D:

Underlay path failure detection and route convergence have their own timers and signaling independent of the tenant EVPN service database. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.

Question 172

A captured underlay packet shows an outer IP and UDP header surrounding a tenant Ethernet frame, and an engineer interprets it as a second application session rather than VXLAN transport. Which configuration or operational action MOST directly addresses the problem?

  1. Confirm the appropriate tenant VRF and supported IP-prefix export, import targets and remote route installation before testing intersubnet traffic.
  2. Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership.
  3. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.
  4. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

Explanation

Correct Answer

D:

In this case, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment. The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service.

Incorrect Answers

A:

EVPN Type 5 routes can carry IP prefix reachability for routed overlays independently of individual MAC/IP Type 2 host advertisements. For this issue, trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

B:

Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.

C:

Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance. That concerns ECMP hash path versus per-packet round robin rather than ingress VTEP encapsulation and egress decapsulation. The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service.

Question 173

A captured underlay packet shows an outer IP and UDP header surrounding a tenant Ethernet frame, and an engineer interprets it as a second application session rather than VXLAN transport. The team proposes: Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment. Which data-center or operational principle BEST justifies that choice?

  1. Control-plane knowledge of a tenant endpoint cannot compensate for a missing transport route to its tunnel endpoint.
  2. Local attachment labels and the overlay's network identifier must align to avoid apparent tenant connectivity with the wrong segment.
  3. Logical tunnel endpoint identity should be separated from individual physical transport paths.
  4. A VXLAN transport packet carries an inner tenant frame; both transport reachability and egress service mapping are required.

Explanation

Correct Answer

D:

A captured underlay packet shows an outer IP and UDP header surrounding a tenant Ethernet frame, and an engineer interprets it as a second application session rather than VXLAN transport. The central principle is a VXLAN transport packet carries an inner tenant frame; both transport reachability and egress service mapping are required. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

Incorrect Answers

A:

Overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane. For this issue, trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

B:

Local attachment labels and the overlay's network identifier must align to avoid apparent tenant connectivity with the wrong segment. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.

C:

Logical tunnel endpoint identity should be separated from individual physical transport paths. That concerns VTEP loopback source identity stability rather than ingress VTEP encapsulation and egress decapsulation. The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service.

Question 174

A captured underlay packet shows an outer IP and UDP header surrounding a tenant Ethernet frame, and an engineer interprets it as a second application session rather than VXLAN transport. After applying this change—Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.—which observation BEST demonstrates success?

  1. The remote leaf receives the intended MAC/IP reachability route and forwards test unicast to the advertising VTEP.
  2. The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service.
  3. Failed next hops are withdrawn within the design target and authorized VXLAN traffic converges onto surviving underlay paths.
  4. A controlled ARP or broadcast discovery test reaches only the intended participating VTEPs while known unicast remains functional.

Explanation

Correct Answer

B:

The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service. That tests the recommended change (Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.) against the original case: A captured underlay packet shows an outer IP and UDP header surrounding a tenant Ethernet frame, and an engineer interprets it as a second application session rather than VXLAN transport.

Incorrect Answers

A:

The remote leaf receives the intended MAC/IP reachability route and forwards test unicast to the advertising VTEP. That concerns EVPN control-plane MAC location advertisement, while the issue here is ingress VTEP encapsulation and egress decapsulation. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

C:

Failed next hops are withdrawn within the design target and authorized VXLAN traffic converges onto surviving underlay paths. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. Specifically for the verification question, the case to validate is: A captured underlay packet shows an outer IP and UDP header surrounding a tenant Ethernet frame, and an engineer interprets it as a second application session rather than VXLAN transport.

D:

A controlled ARP or broadcast discovery test reaches only the intended participating VTEPs while known unicast remains functional. That concerns EVPN Type 3 inclusive membership for BUM rather than ingress VTEP encapsulation and egress decapsulation. The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service.

Question 175

A captured underlay packet shows an outer IP and UDP header surrounding a tenant Ethernet frame, and an engineer interprets it as a second application session rather than VXLAN transport. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include encapsulation/decapsulation and VNI validation in packet-level overlay fault isolation.
  2. Check anycast gateway consistency whenever a tenant virtual network is extended to another rack.
  3. Evaluate ECMP using diverse realistic flows and per-path counters rather than a single stream.
  4. Validate ESI and link-aggregation consistency whenever replacing a multihoming peer.

Explanation

Correct Answer

A:

A lasting control should detect the original error before release. Include encapsulation/decapsulation and VNI validation in packet-level overlay fault isolation. That is important in this case because vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. The scenario was: A captured underlay packet shows an outer IP and UDP header surrounding a tenant Ethernet frame, and an engineer interprets it as a second application session rather than VXLAN transport.

Incorrect Answers

B:

Check anycast gateway consistency whenever a tenant virtual network is extended to another rack. That concerns anycast default gateway identity across leafs, while the issue here is ingress VTEP encapsulation and egress decapsulation. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

C:

Common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop. However, the present prevention decision is grounded in: A captured underlay packet shows an outer IP and UDP header surrounding a tenant Ethernet frame, and an engineer interprets it as a second application session rather than VXLAN transport. For this issue, trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

D:

Validate ESI and link-aggregation consistency whenever replacing a multihoming peer. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.

Question 176

A remote VTEP receives encapsulated traffic for a configured VNI but does not deliver it locally because its service mapping fails at decapsulation. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.
  2. Overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.
  3. VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.
  4. A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific.

Explanation

Correct Answer

C:

The fault is not established by a generic firewall symptom alone. VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

Incorrect Answers

A:

A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.

B:

Overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane. That concerns underlay reachability prerequisite for overlay, while the issue here is ingress VTEP encapsulation and egress decapsulation. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

D:

A VXLAN VNI distinguishes the logical overlay segment, while local VLAN numbers and attachment mapping can be implementation-specific. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.

Question 177

A remote VTEP receives encapsulated traffic for a configured VNI but does not deliver it locally because its service mapping fails at decapsulation. Which configuration or operational action MOST directly addresses the problem?

  1. Correlate interface errors, supported BFD or routing-neighbor state and route withdrawal, then correct the underlay fault and validate recovery.
  2. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.
  3. Verify local MAC learning, the advertised EVPN Type 2 route, route-target import and remote forwarding installation for the tenant VNI.
  4. Inspect the tenant's EVPN Type 3 reachability and import scope, and repair the supported BUM replication membership for its VNI.

Explanation

Correct Answer

B:

This action directly fixes the documented constraint: VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. Apply it to the reported case: A remote VTEP receives encapsulated traffic for a configured VNI but does not deliver it locally because its service mapping fails at decapsulation. Then verify: The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service.

Incorrect Answers

A:

Underlay path failure detection and route convergence have their own timers and signaling independent of the tenant EVPN service database. However, the present correction decision is grounded in: A remote VTEP receives encapsulated traffic for a configured VNI but does not deliver it locally because its service mapping fails at decapsulation. For this issue, trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

C:

Verify local MAC learning, the advertised EVPN Type 2 route, route-target import and remote forwarding installation for the tenant VNI. That concerns EVPN control-plane MAC location advertisement rather than ingress VTEP encapsulation and egress decapsulation. The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service.

D:

EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.

Question 178

A remote VTEP receives encapsulated traffic for a configured VNI but does not deliver it locally because its service mapping fails at decapsulation. The team proposes: Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment. Which data-center or operational principle BEST justifies that choice?

  1. Consistent distributed gateway identity helps preserve endpoint expectations when their physical attachment location changes.
  2. Equal-cost path availability does not imply that each individual connection uses every available physical route.
  3. A VXLAN transport packet carries an inner tenant frame; both transport reachability and egress service mapping are required.
  4. Two physical links alone do not create a coordinated EVPN Ethernet segment.

Explanation

Correct Answer

C:

This principle links classification and policy semantics to the relevant failure. A VXLAN transport packet carries an inner tenant frame; both transport reachability and egress service mapping are required. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. The remedy under discussion is: Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

Incorrect Answers

A:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. However, the present principle decision is grounded in: A remote VTEP receives encapsulated traffic for a configured VNI but does not deliver it locally because its service mapping fails at decapsulation. For this issue, trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

B:

Equal-cost path availability does not imply that each individual connection uses every available physical route. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.

D:

A shared Ethernet segment identity is important for supported EVPN multihoming coordination of the same access segment. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.

Question 179

A remote VTEP receives encapsulated traffic for a configured VNI but does not deliver it locally because its service mapping fails at decapsulation. After applying this change—Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.—which observation BEST demonstrates success?

  1. A representative maximum-size tenant transfer succeeds over each selected spine path without underlay oversize drops.
  2. Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink.
  3. Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated.
  4. The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service.

Explanation

Correct Answer

D:

The criterion directly exercises the affected flow or security object: The receiving VTEP decapsulates the intended tenant frame and forwards it only on the authorized local service. The original condition was: A remote VTEP receives encapsulated traffic for a configured VNI but does not deliver it locally because its service mapping fails at decapsulation. The relevant correction is: Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

Incorrect Answers

A:

A representative maximum-size tenant transfer succeeds over each selected spine path without underlay oversize drops. That concerns underlay MTU for VXLAN encapsulation, while the issue here is ingress VTEP encapsulation and egress decapsulation. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

B:

A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface. For this issue, trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

C:

Both approved tenant hosts share the intended bridged service while a similarly numbered VLAN from another tenant remains isolated. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.

Question 180

A remote VTEP receives encapsulated traffic for a configured VNI but does not deliver it locally because its service mapping fails at decapsulation. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include encapsulation/decapsulation and VNI validation in packet-level overlay fault isolation.
  2. Maintain automated checks for VNI service identity during VLAN renumbering and rack expansion.
  3. Validate distributed gateway placement and VRF association when adding VNIs or leafs.
  4. Check BUM membership whenever adding VNIs or extending a bridge domain to a new rack.

Explanation

Correct Answer

A:

This control reduces recurrence of the same class of failure: VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. Apply the recurring practice: Include encapsulation/decapsulation and VNI validation in packet-level overlay fault isolation. The previous example was: A remote VTEP receives encapsulated traffic for a configured VNI but does not deliver it locally because its service mapping fails at decapsulation.

Incorrect Answers

B:

Maintain automated checks for VNI service identity during VLAN renumbering and rack expansion. That concerns VXLAN VNI-to-VLAN mapping, while the issue here is ingress VTEP encapsulation and egress decapsulation. Trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

C:

Edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks. However, the present prevention decision is grounded in: A remote VTEP receives encapsulated traffic for a configured VNI but does not deliver it locally because its service mapping fails at decapsulation. For this issue, trace VTEP source/destination, outer transport and VNI at ingress and egress, then align the receiving bridge-domain attachment.

D:

Check BUM membership whenever adding VNIs or extending a bridge domain to a new rack. Here, vXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests