McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 3

Question 20

A maintenance team disables a single leaf-to-spine circuit and expects the fabric to use the surviving equal-cost route, yet the test is never performed. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Validate fabric cabling against the reference topology whenever racks or spine ports are added.
  2. Correlate MAC learning, EVPN advertisement and remote route import during server moves.
  3. Include controlled link-failure ECMP convergence tests in rack commissioning and uplink changes.
  4. Include route type and tenant VRF checks in intersubnet rollout procedures.

Explanation

Correct Answer

C:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Include controlled link-failure ECMP convergence tests in rack commissioning and uplink changes. Redundancy is a forwarding property demonstrated by healthy alternate paths, not simply by the number of cables installed.

Incorrect Answers

A:

In a conventional leaf–spine Clos fabric, interleaf traffic normally crosses an available spine while servers attach at the leaf edge. Here, equal-cost multipath routing can retain forwarding over remaining healthy next hops when one member path disappears.

B:

Correlate MAC learning, EVPN advertisement and remote route import during server moves. That concerns EVPN control-plane MAC location advertisement, while the issue here is ECMP resilience after a spine link failure. Verify next-hop programming and the affected routing adjacencies, then test controlled traffic using surviving ECMP members before declaring resilience.

D:

Include route type and tenant VRF checks in intersubnet rollout procedures. Here, equal-cost multipath routing can retain forwarding over remaining healthy next hops when one member path disappears.

Question 21

An EVPN route to a remote MAC is visible, but the receiving leaf cannot encapsulate traffic because its underlay has no route toward the remote VTEP address. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. EVPN control-plane MAC mobility handling updates the advertised endpoint location and withdraws or supersedes stale location information.
  2. Overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.
  3. EVPN Type 2 routes distribute learned MAC and optionally IP reachability so remote VTEPs can locate a host.
  4. A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

Explanation

Correct Answer

B:

The decisive cause is overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane. Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

Incorrect Answers

A:

EVPN control-plane MAC mobility handling updates the advertised endpoint location and withdraws or supersedes stale location information. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

C:

EVPN Type 2 routes distribute learned MAC and optionally IP reachability so remote VTEPs can locate a host. For this issue, restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

D:

A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

Question 22

An EVPN route to a remote MAC is visible, but the receiving leaf cannot encapsulate traffic because its underlay has no route toward the remote VTEP address. Which configuration or operational action MOST directly addresses the problem?

  1. Confirm the appropriate tenant VRF and supported IP-prefix export, import targets and remote route installation before testing intersubnet traffic.
  2. Compare the peer addressing and ASNs on leaf and spine, establish the supported BGP underlay sessions, and verify route installation.
  3. Measure encapsulation overhead and configure a consistent supported underlay MTU, or constrain overlay payload sizes according to the design.
  4. Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

Explanation

Correct Answer

D:

In this case, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane. Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again. The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end.

Incorrect Answers

A:

EVPN Type 5 routes can carry IP prefix reachability for routed overlays independently of individual MAC/IP Type 2 host advertisements. For this issue, restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

B:

Compare the peer addressing and ASNs on leaf and spine, establish the supported BGP underlay sessions, and verify route installation. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

C:

Measure encapsulation overhead and configure a consistent supported underlay MTU, or constrain overlay payload sizes according to the design. That concerns underlay MTU for VXLAN encapsulation rather than underlay reachability prerequisite for overlay. The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end.

Question 23

An EVPN route to a remote MAC is visible, but the receiving leaf cannot encapsulate traffic because its underlay has no route toward the remote VTEP address. The team proposes: Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again. Which data-center or operational principle BEST justifies that choice?

  1. Control-plane knowledge of a tenant endpoint cannot compensate for a missing transport route to its tunnel endpoint.
  2. Tenant flood membership is a separate control-plane requirement from individual host MAC advertisement.
  3. A fabric can route at its edges instead of requiring every tenant packet to hairpin through an unrelated centralized device.
  4. A healthy-looking overlay route cannot substitute for timely detection of an unusable transport path.

Explanation

Correct Answer

A:

An EVPN route to a remote MAC is visible, but the receiving leaf cannot encapsulate traffic because its underlay has no route toward the remote VTEP address. The central principle is control-plane knowledge of a tenant endpoint cannot compensate for a missing transport route to its tunnel endpoint. Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

Incorrect Answers

B:

Tenant flood membership is a separate control-plane requirement from individual host MAC advertisement. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

C:

A fabric can route at its edges instead of requiring every tenant packet to hairpin through an unrelated centralized device. That concerns edge-routed bridging for local gateway rather than underlay reachability prerequisite for overlay. The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end.

D:

Underlay path failure detection and route convergence have their own timers and signaling independent of the tenant EVPN service database. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

Question 24

An EVPN route to a remote MAC is visible, but the receiving leaf cannot encapsulate traffic because its underlay has no route toward the remote VTEP address. After applying this change—Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.—which observation BEST demonstrates success?

  1. The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end.
  2. Only the intended receiving VRFs import the remote EVPN routes, while a deliberate unrelated tenant import test remains isolated.
  3. The controlled frame reaches legitimate remote segments without returning to its originating shared attachment.
  4. Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow.

Explanation

Correct Answer

A:

The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end. That tests the recommended change (Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.) against the original case: An EVPN route to a remote MAC is visible, but the receiving leaf cannot encapsulate traffic because its underlay has no route toward the remote VTEP address.

Incorrect Answers

B:

Route targets mark EVPN VPN route membership and VRF import/export decisions; an established BGP session alone does not authorize all tenant routes. For this issue, restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

C:

The controlled frame reaches legitimate remote segments without returning to its originating shared attachment. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

D:

Multiple qualified flows distribute across the intended healthy path set without unnecessary packet reordering of each tested flow. That concerns ECMP hash path versus per-packet round robin rather than underlay reachability prerequisite for overlay. The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end.

Question 25

An EVPN route to a remote MAC is visible, but the receiving leaf cannot encapsulate traffic because its underlay has no route toward the remote VTEP address. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include encapsulation/decapsulation and VNI validation in packet-level overlay fault isolation.
  2. Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations.
  3. Include route type and tenant VRF checks in intersubnet rollout procedures.
  4. Monitor underlay loopback reachability separately from EVPN route presence during fabric changes.

Explanation

Correct Answer

D:

A lasting control should detect the original error before release. Monitor underlay loopback reachability separately from EVPN route presence during fabric changes. That is important in this case because overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane. The scenario was: An EVPN route to a remote MAC is visible, but the receiving leaf cannot encapsulate traffic because its underlay has no route toward the remote VTEP address.

Incorrect Answers

A:

VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

B:

Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations. That concerns EVPN MAC mobility after virtual machine relocation, while the issue here is underlay reachability prerequisite for overlay. Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

C:

EVPN Type 5 routes can carry IP prefix reachability for routed overlays independently of individual MAC/IP Type 2 host advertisements. However, the present prevention decision is grounded in: An EVPN route to a remote MAC is visible, but the receiving leaf cannot encapsulate traffic because its underlay has no route toward the remote VTEP address. For this issue, restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

Question 26

A fabric operator fixes EVPN route targets while ignoring a withdrawn loopback route required to reach a remote VXLAN tunnel endpoint. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.
  2. EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain.
  3. Edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks.
  4. Underlay path failure detection and route convergence have their own timers and signaling independent of the tenant EVPN service database.

Explanation

Correct Answer

A:

The fault is not established by a generic firewall symptom alone. Overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane. Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

Incorrect Answers

B:

EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain. That concerns EVPN Type 3 inclusive membership for BUM, while the issue here is underlay reachability prerequisite for overlay. Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

C:

Edge-routed bridging places an appropriate distributed Layer 3 gateway function at fabric edges for attached virtual networks. For this issue, restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

D:

This choice would be assessed for a different data-center fabric or Apstra operational situation: A data center experiences intermittent leaf-to-spine packet loss while BGP sessions reset slowly, and the team compares only tenant MAC routes for a diagnosis. Its decisive constraint is overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

Question 27

A fabric operator fixes EVPN route targets while ignoring a withdrawn loopback route required to reach a remote VXLAN tunnel endpoint. Which configuration or operational action MOST directly addresses the problem?

  1. Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.
  2. Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership.
  3. Verify the supported ESI split-horizon and multihoming forwarding state, and correct mismatched peer membership before adding broader flood permissions.
  4. Test several distinct source/destination/transport tuples, inspect effective ECMP next hops and compare aggregate usage before claiming imbalance.

Explanation

Correct Answer

A:

This action directly fixes the documented constraint: Overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane. Apply it to the reported case: A fabric operator fixes EVPN route targets while ignoring a withdrawn loopback route required to reach a remote VXLAN tunnel endpoint. Then verify: The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end.

Incorrect Answers

B:

Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

C:

Verify the supported ESI split-horizon and multihoming forwarding state, and correct mismatched peer membership before adding broader flood permissions. That concerns EVPN multihoming split-horizon behavior rather than underlay reachability prerequisite for overlay. The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end.

D:

Common ECMP forwarding implementations use stable flow hashing to select paths, so one flow need not balance packet-by-packet across every next hop. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

Question 28

A fabric operator fixes EVPN route targets while ignoring a withdrawn loopback route required to reach a remote VXLAN tunnel endpoint. The team proposes: Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again. Which data-center or operational principle BEST justifies that choice?

  1. A VXLAN transport packet carries an inner tenant frame; both transport reachability and egress service mapping are required.
  2. Tenant endpoint mobility changes overlay location information even when the underlying IP fabric topology stays unchanged.
  3. Layer 3 overlay prefix distribution and Layer 2 endpoint signaling solve different forwarding problems.
  4. Control-plane knowledge of a tenant endpoint cannot compensate for a missing transport route to its tunnel endpoint.

Explanation

Correct Answer

D:

This principle links classification and policy semantics to the relevant failure. Control-plane knowledge of a tenant endpoint cannot compensate for a missing transport route to its tunnel endpoint. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane. The remedy under discussion is: Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

Incorrect Answers

A:

VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. For this issue, restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

B:

Tenant endpoint mobility changes overlay location information even when the underlying IP fabric topology stays unchanged. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

C:

Layer 3 overlay prefix distribution and Layer 2 endpoint signaling solve different forwarding problems. That concerns EVPN Type 5 routed prefix reachability rather than underlay reachability prerequisite for overlay. The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end.

Question 29

A fabric operator fixes EVPN route targets while ignoring a withdrawn loopback route required to reach a remote VXLAN tunnel endpoint. After applying this change—Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.—which observation BEST demonstrates success?

  1. Both intended BGP adjacencies establish and the leaf learns the reachable remote loopback prefixes needed for VXLAN transport.
  2. The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end.
  3. A representative maximum-size tenant transfer succeeds over each selected spine path without underlay oversize drops.
  4. Failed next hops are withdrawn within the design target and authorized VXLAN traffic converges onto surviving underlay paths.

Explanation

Correct Answer

B:

The criterion directly exercises the affected flow or security object: The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end. The original condition was: A fabric operator fixes EVPN route targets while ignoring a withdrawn loopback route required to reach a remote VXLAN tunnel endpoint. The relevant correction is: Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

Incorrect Answers

A:

Both intended BGP adjacencies establish and the leaf learns the reachable remote loopback prefixes needed for VXLAN transport. That concerns BGP underlay adjacency versus established overlay, while the issue here is underlay reachability prerequisite for overlay. Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

C:

A representative maximum-size tenant transfer succeeds over each selected spine path without underlay oversize drops. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

D:

Failed next hops are withdrawn within the design target and authorized VXLAN traffic converges onto surviving underlay paths. That concerns underlay failure isolation using BFD and route state rather than underlay reachability prerequisite for overlay. The remote VTEP address becomes reachable over the underlay and the approved encapsulated tenant flow succeeds end to end.

Question 30

A fabric operator fixes EVPN route targets while ignoring a withdrawn loopback route required to reach a remote VXLAN tunnel endpoint. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include controlled link-failure ECMP convergence tests in rack commissioning and uplink changes.
  2. Check BUM membership whenever adding VNIs or extending a bridge domain to a new rack.
  3. Test both positive and negative route-target import outcomes during tenant deployment.
  4. Monitor underlay loopback reachability separately from EVPN route presence during fabric changes.

Explanation

Correct Answer

D:

This control reduces recurrence of the same class of failure: Overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane. Apply the recurring practice: Monitor underlay loopback reachability separately from EVPN route presence during fabric changes. The previous example was: A fabric operator fixes EVPN route targets while ignoring a withdrawn loopback route required to reach a remote VXLAN tunnel endpoint.

Incorrect Answers

A:

Equal-cost multipath routing can retain forwarding over remaining healthy next hops when one member path disappears. Here, overlay reachability depends on the IP underlay being able to route packets between the VTEP endpoints advertised by the control plane.

B:

Check BUM membership whenever adding VNIs or extending a bridge domain to a new rack. That concerns EVPN Type 3 inclusive membership for BUM, while the issue here is underlay reachability prerequisite for overlay. Restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again. Specifically for the prevention question, the case to validate is: A fabric operator fixes EVPN route targets while ignoring a withdrawn loopback route required to reach a remote VXLAN tunnel endpoint.

C:

Route targets mark EVPN VPN route membership and VRF import/export decisions; an established BGP session alone does not authorize all tenant routes. However, the present prevention decision is grounded in: A fabric operator fixes EVPN route targets while ignoring a withdrawn loopback route required to reach a remote VXLAN tunnel endpoint. For this issue, restore and verify the underlay route to the remote VTEP loopback and its next hops before troubleshooting tenant bridging again.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests