McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 5

Question 40

A new rack comes online with correct cabling, yet mismatched BGP neighbor ASNs prevent underlay prefix exchange and overlay traffic cannot form usable paths. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Check interface state, BGP session state and learned prefix coverage as separate fabric health criteria.
  2. Correlate MAC learning, EVPN advertisement and remote route import during server moves.
  3. Check anycast gateway consistency whenever a tenant virtual network is extended to another rack.
  4. Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations.

Explanation

Correct Answer

A:

A lasting control should detect the original error before release. Check interface state, BGP session state and learned prefix coverage as separate fabric health criteria. That is important in this case because physical link state does not guarantee underlay routes if the intended BGP neighbors or address-family configuration fail. The scenario was: A new rack comes online with correct cabling, yet mismatched BGP neighbor ASNs prevent underlay prefix exchange and overlay traffic cannot form usable paths.

Incorrect Answers

B:

Correlate MAC learning, EVPN advertisement and remote route import during server moves. That concerns EVPN control-plane MAC location advertisement, while the issue here is BGP underlay adjacency versus established overlay. Compare the peer addressing and ASNs on leaf and spine, establish the supported BGP underlay sessions, and verify route installation.

C:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. For this issue, compare the peer addressing and ASNs on leaf and spine, establish the supported BGP underlay sessions, and verify route installation.

D:

Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations. Here, physical link state does not guarantee underlay routes if the intended BGP neighbors or address-family configuration fail.

Question 41

A leaf sources VXLAN packets from a transient physical uplink address, and remote peers cannot consistently associate the fabric device with a stable tunnel endpoint. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Physical link state does not guarantee underlay routes if the intended BGP neighbors or address-family configuration fail.
  2. A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.
  3. EVPN Type 2 routes distribute learned MAC and optionally IP reachability so remote VTEPs can locate a host.
  4. EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain.

Explanation

Correct Answer

B:

The fault is not established by a generic firewall symptom alone. A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface. Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

Incorrect Answers

A:

Physical link state does not guarantee underlay routes if the intended BGP neighbors or address-family configuration fail. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

C:

EVPN Type 2 routes distribute learned MAC and optionally IP reachability so remote VTEPs can locate a host. For this issue, confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

D:

EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

Question 42

A leaf sources VXLAN packets from a transient physical uplink address, and remote peers cannot consistently associate the fabric device with a stable tunnel endpoint. Which configuration or operational action MOST directly addresses the problem?

  1. Measure encapsulation overhead and configure a consistent supported underlay MTU, or constrain overlay payload sizes according to the design.
  2. Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership.
  3. Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.
  4. Correlate interface errors, supported BFD or routing-neighbor state and route withdrawal, then correct the underlay fault and validate recovery.

Explanation

Correct Answer

C:

This action directly fixes the documented constraint: A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface. Apply it to the reported case: A leaf sources VXLAN packets from a transient physical uplink address, and remote peers cannot consistently associate the fabric device with a stable tunnel endpoint. Then verify: Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink.

Incorrect Answers

A:

VXLAN adds outer transport headers, making the required underlay packet size greater than the original tenant Ethernet payload. For this issue, confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

B:

Compare intended export RTs and import policy in the participating tenant instances, correcting only the authorized membership. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

D:

Underlay path failure detection and route convergence have their own timers and signaling independent of the tenant EVPN service database. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

Question 43

A leaf sources VXLAN packets from a transient physical uplink address, and remote peers cannot consistently associate the fabric device with a stable tunnel endpoint. The team proposes: Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity. Which data-center or operational principle BEST justifies that choice?

  1. Logical tunnel endpoint identity should be separated from individual physical transport paths.
  2. Consistent distributed gateway identity helps preserve endpoint expectations when their physical attachment location changes.
  3. A VXLAN transport packet carries an inner tenant frame; both transport reachability and egress service mapping are required.
  4. Layer 3 overlay prefix distribution and Layer 2 endpoint signaling solve different forwarding problems.

Explanation

Correct Answer

A:

This principle links classification and policy semantics to the relevant failure. Logical tunnel endpoint identity should be separated from individual physical transport paths. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface. The remedy under discussion is: Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

Incorrect Answers

B:

Consistent distributed gateway identity helps preserve endpoint expectations when their physical attachment location changes. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

C:

A VXLAN transport packet carries an inner tenant frame; both transport reachability and egress service mapping are required. That concerns ingress VTEP encapsulation and egress decapsulation rather than VTEP loopback source identity stability. Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink.

D:

EVPN Type 5 routes can carry IP prefix reachability for routed overlays independently of individual MAC/IP Type 2 host advertisements. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

Question 44

A leaf sources VXLAN packets from a transient physical uplink address, and remote peers cannot consistently associate the fabric device with a stable tunnel endpoint. After applying this change—Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.—which observation BEST demonstrates success?

  1. A controlled flow to the moved virtual machine converges to the new VTEP without permanent forwarding to its old attachment.
  2. Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink.
  3. The two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior.
  4. Both intended BGP adjacencies establish and the leaf learns the reachable remote loopback prefixes needed for VXLAN transport.

Explanation

Correct Answer

B:

The criterion directly exercises the affected flow or security object: Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink. The original condition was: A leaf sources VXLAN packets from a transient physical uplink address, and remote peers cannot consistently associate the fabric device with a stable tunnel endpoint. The relevant correction is: Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

Incorrect Answers

A:

A controlled flow to the moved virtual machine converges to the new VTEP without permanent forwarding to its old attachment. That concerns EVPN MAC mobility after virtual machine relocation, while the issue here is VTEP loopback source identity stability. Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

C:

The two authorized leafs advertise coherent membership for the same segment and a controlled member-link loss follows the supported recovery behavior. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

D:

Both intended BGP adjacencies establish and the leaf learns the reachable remote loopback prefixes needed for VXLAN transport. That concerns BGP underlay adjacency versus established overlay rather than VTEP loopback source identity stability. Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink.

Question 45

A leaf sources VXLAN packets from a transient physical uplink address, and remote peers cannot consistently associate the fabric device with a stable tunnel endpoint. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Document loopback allocation and verify its route advertisement during device replacement and uplink maintenance.
  2. Evaluate ECMP using diverse realistic flows and per-path counters rather than a single stream.
  3. Test both positive and negative route-target import outcomes during tenant deployment.
  4. Check BUM membership whenever adding VNIs or extending a bridge domain to a new rack.

Explanation

Correct Answer

A:

This control reduces recurrence of the same class of failure: A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface. Apply the recurring practice: Document loopback allocation and verify its route advertisement during device replacement and uplink maintenance. The previous example was: A leaf sources VXLAN packets from a transient physical uplink address, and remote peers cannot consistently associate the fabric device with a stable tunnel endpoint.

Incorrect Answers

B:

Evaluate ECMP using diverse realistic flows and per-path counters rather than a single stream. That concerns ECMP hash path versus per-packet round robin, while the issue here is VTEP loopback source identity stability. Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

C:

Route targets mark EVPN VPN route membership and VRF import/export decisions; an established BGP session alone does not authorize all tenant routes. For this issue, confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

D:

Check BUM membership whenever adding VNIs or extending a bridge domain to a new rack. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface. Specifically for the prevention question, the case to validate is: A leaf sources VXLAN packets from a transient physical uplink address, and remote peers cannot consistently associate the fabric device with a stable tunnel endpoint.

Question 46

A spine-link migration changes a transit interface address and unexpectedly disrupts VXLAN reachability because the design never used a stable VTEP identity. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. EVPN Type 5 routes can carry IP prefix reachability for routed overlays independently of individual MAC/IP Type 2 host advertisements.
  2. A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment.
  3. VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context.
  4. A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

Explanation

Correct Answer

D:

A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface. Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink.

Incorrect Answers

A:

EVPN Type 5 routes can carry IP prefix reachability for routed overlays independently of individual MAC/IP Type 2 host advertisements. For the current diagnosis question, the evidence instead states: A spine-link migration changes a transit interface address and unexpectedly disrupts VXLAN reachability because the design never used a stable VTEP identity. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

B:

A distributed anycast gateway design requires a consistent logical gateway identity across participating VTEPs for the same tenant segment. That concerns anycast default gateway identity across leafs, while the issue here is VTEP loopback source identity stability. Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

C:

VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. For this issue, confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

Question 47

A spine-link migration changes a transit interface address and unexpectedly disrupts VXLAN reachability because the design never used a stable VTEP identity. Which configuration or operational action MOST directly addresses the problem?

  1. Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.
  2. Compare the peer addressing and ASNs on leaf and spine, establish the supported BGP underlay sessions, and verify route installation.
  3. Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes.
  4. Inspect MAC learning, the mobile endpoint's EVPN advertisements and remote forwarding state, then resolve any stale route or move-detection problem.

Explanation

Correct Answer

A:

Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity. The target behavior is demonstrated when encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink.

Incorrect Answers

B:

Compare the peer addressing and ASNs on leaf and spine, establish the supported BGP underlay sessions, and verify route installation. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

C:

Review the supported ESI and attachment configuration on both peers, align its identity and check the resulting EVPN multihoming routes. That concerns ethernet segment identifier for multihomed access rather than VTEP loopback source identity stability. Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink.

D:

EVPN control-plane MAC mobility handling updates the advertised endpoint location and withdraws or supersedes stale location information. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

Question 48

A spine-link migration changes a transit interface address and unexpectedly disrupts VXLAN reachability because the design never used a stable VTEP identity. The team proposes: Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity. Which data-center or operational principle BEST justifies that choice?

  1. Tenant flood membership is a separate control-plane requirement from individual host MAC advertisement.
  2. Equal-cost path availability does not imply that each individual connection uses every available physical route.
  3. Logical tenant separation relies on explicit control-plane route distribution scope, not only shared fabric transport.
  4. Logical tunnel endpoint identity should be separated from individual physical transport paths.

Explanation

Correct Answer

D:

Logical tunnel endpoint identity should be separated from individual physical transport paths. It justifies the proposed change (Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.) for the precise reported case: A spine-link migration changes a transit interface address and unexpectedly disrupts VXLAN reachability because the design never used a stable VTEP identity.

Incorrect Answers

A:

EVPN Type 3 IMET signaling can advertise VTEP membership information used for broadcast, unknown-unicast and multicast replication in a VXLAN domain. For this issue, confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

B:

Equal-cost path availability does not imply that each individual connection uses every available physical route. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

C:

Logical tenant separation relies on explicit control-plane route distribution scope, not only shared fabric transport. That concerns EVPN route target tenant import rather than VTEP loopback source identity stability. Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink.

Question 49

A spine-link migration changes a transit interface address and unexpectedly disrupts VXLAN reachability because the design never used a stable VTEP identity. After applying this change—Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.—which observation BEST demonstrates success?

  1. A representative maximum-size tenant transfer succeeds over each selected spine path without underlay oversize drops.
  2. Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink.
  3. A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance.
  4. Failed next hops are withdrawn within the design target and authorized VXLAN traffic converges onto surviving underlay paths.

Explanation

Correct Answer

B:

The configuration is not validated merely by a successful commit. Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink. A VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

Incorrect Answers

A:

A representative maximum-size tenant transfer succeeds over each selected spine path without underlay oversize drops. That concerns underlay MTU for VXLAN encapsulation, while the issue here is VTEP loopback source identity stability. Confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

C:

A controlled intersubnet flow uses the intended edge gateway and reaches the destination through the authorized tenant routing instance. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

D:

Failed next hops are withdrawn within the design target and authorized VXLAN traffic converges onto surviving underlay paths. That concerns underlay failure isolation using BFD and route state rather than VTEP loopback source identity stability. Encapsulated test traffic retains the intended VTEP source while underlay forwarding can use either healthy physical uplink.

Question 50

A spine-link migration changes a transit interface address and unexpectedly disrupts VXLAN reachability because the design never used a stable VTEP identity. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include route type and tenant VRF checks in intersubnet rollout procedures.
  2. Document loopback allocation and verify its route advertisement during device replacement and uplink maintenance.
  3. Include encapsulation/decapsulation and VNI validation in packet-level overlay fault isolation.
  4. Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations.

Explanation

Correct Answer

B:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Document loopback allocation and verify its route advertisement during device replacement and uplink maintenance. Logical tunnel endpoint identity should be separated from individual physical transport paths.

Incorrect Answers

A:

EVPN Type 5 routes can carry IP prefix reachability for routed overlays independently of individual MAC/IP Type 2 host advertisements. For the current prevention question, the evidence instead states: A spine-link migration changes a transit interface address and unexpectedly disrupts VXLAN reachability because the design never used a stable VTEP identity. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

C:

VXLAN tunnel endpoints encapsulate tenant frames at ingress and decapsulate at egress using the overlay VNI context. However, the present prevention decision is grounded in: A spine-link migration changes a transit interface address and unexpectedly disrupts VXLAN reachability because the design never used a stable VTEP identity. For this issue, confirm the intended VTEP source address and advertise its loopback through the underlay so transport changes do not silently change endpoint identity.

D:

Include endpoint move tests and MAC route convergence monitoring during host virtualization migrations. Here, a VTEP endpoint requires an appropriate stable IP identity reachable in the underlay, commonly on a loopback interface.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests