McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 45

Question 440

Engineers stage a blueprint node and attempt to push switch configuration before completing supported Apstra agent onboarding on its underlying operating system. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Gate cutover approval on observed device readiness, deployment task completion and active-state validation.
  2. Require serial and rack-location reconciliation during device onboarding and replacement.
  3. Review endpoint versus fabric-node roles before importing rack inventory.
  4. Include agent version and management-channel prerequisites in leaf onboarding checklists.

Explanation

Correct Answer

D:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Include agent version and management-channel prerequisites in leaf onboarding checklists. Fabric automation cannot reliably configure a device it has not fully enrolled and connected as a managed endpoint.

Incorrect Answers

A:

Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. For the current prevention question, the evidence instead states: Engineers stage a blueprint node and attempt to push switch configuration before completing supported Apstra agent onboarding on its underlying operating system. Here, the managed device lifecycle requires supported device agent readiness and control connectivity before the controller can safely deliver its intended configuration.

B:

Require serial and rack-location reconciliation during device onboarding and replacement. That concerns discovering and binding device serial IDs, while the issue here is agent installation before configuration deployment. Complete the vendor-supported agent setup and verify management transport and health, then retry the staged deployment checks.

C:

Managed fabric switches and generic attached systems have different operational roles, with generic systems modeling external endpoint connectivity rather than switch control. However, the present prevention decision is grounded in: Engineers stage a blueprint node and attempt to push switch configuration before completing supported Apstra agent onboarding on its underlying operating system. For this issue, complete the vendor-supported agent setup and verify management transport and health, then retry the staged deployment checks.

Question 441

A rack's planned leaf-to-spine cables are reversed at the patch panel, but both interfaces show link up and the team assumes the Apstra cable map must be correct. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes.
  2. The supported Apstra deployment mode and device state determine how intent configuration is introduced and reconciled with the current platform.
  3. Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.
  4. A successful request to deploy does not prove completion; Apstra task state and device-level error details determine the actual result.

Explanation

Correct Answer

C:

The decisive cause is apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

Incorrect Answers

A:

Staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

B:

The supported Apstra deployment mode and device state determine how intent configuration is introduced and reconciled with the current platform. That concerns build deploy mode choice for device control, while the issue here is cable map topology validation. Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

D:

A successful request to deploy does not prove completion; Apstra task state and device-level error details determine the actual result. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

Question 442

A rack's planned leaf-to-spine cables are reversed at the patch panel, but both interfaces show link up and the team assumes the Apstra cable map must be correct. Which configuration or operational action MOST directly addresses the problem?

  1. Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.
  2. Choose or create a supported interface map for the actual device model, assign it in the staged physical build and validate mapped ports before deploy.
  3. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.
  4. Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

Explanation

Correct Answer

D:

In this case, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections. The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing.

Incorrect Answers

A:

A topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic. For this issue, compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

B:

Choose or create a supported interface map for the actual device model, assign it in the staged physical build and validate mapped ports before deploy. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

C:

Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication. That concerns appliance onboarding management route rather than cable map topology validation. The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing.

Question 443

A rack's planned leaf-to-spine cables are reversed at the patch panel, but both interfaces show link up and the team assumes the Apstra cable map must be correct. The team proposes: Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections. Which data-center or operational principle BEST justifies that choice?

  1. Discovering a connected device does not make it an Apstra-managed routing or switching node.
  2. Network deployment state must be judged from lifecycle evidence rather than the mere presence of a device in inventory.
  3. Ethernet carrier is a local interface signal, not proof of conformance with a modeled fabric topology.
  4. Fabric automation cannot reliably configure a device it has not fully enrolled and connected as a managed endpoint.

Explanation

Correct Answer

C:

A rack's planned leaf-to-spine cables are reversed at the patch panel, but both interfaces show link up and the team assumes the Apstra cable map must be correct. The central principle is ethernet carrier is a local interface signal, not proof of conformance with a modeled fabric topology. Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

Incorrect Answers

A:

Managed fabric switches and generic attached systems have different operational roles, with generic systems modeling external endpoint connectivity rather than switch control. For this issue, compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

B:

Network deployment state must be judged from lifecycle evidence rather than the mere presence of a device in inventory. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

D:

The managed device lifecycle requires supported device agent readiness and control connectivity before the controller can safely deliver its intended configuration. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

Question 444

A rack's planned leaf-to-spine cables are reversed at the patch panel, but both interfaces show link up and the team assumes the Apstra cable map must be correct. After applying this change—Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.—which observation BEST demonstrates success?

  1. The target leaf reaches an active managed condition with its required management access intact and intended fabric settings enforced.
  2. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.
  3. The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing.
  4. The active blueprint revision and device running configuration agree with the newly approved fabric role settings.

Explanation

Correct Answer

C:

The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing. That tests the recommended change (Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.) against the original case: A rack's planned leaf-to-spine cables are reversed at the patch panel, but both interfaces show link up and the team assumes the Apstra cable map must be correct.

Incorrect Answers

A:

The target leaf reaches an active managed condition with its required management access intact and intended fabric settings enforced. That concerns build deploy mode choice for device control, while the issue here is cable map topology validation. Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections. Specifically for the verification question, the case to validate is: A rack's planned leaf-to-spine cables are reversed at the patch panel, but both interfaces show link up and the team assumes the Apstra cable map must be correct.

B:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. For this issue, compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

D:

The active blueprint revision and device running configuration agree with the newly approved fabric role settings. That concerns safe staged versus deployed device configuration rather than cable map topology validation. The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing.

Question 445

A rack's planned leaf-to-spine cables are reversed at the patch panel, but both interfaces show link up and the team assumes the Apstra cable map must be correct. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Reconcile physical patch records and blueprint cable maps after every rack move or spine port change.
  2. Test management-plane connectivity whenever changing out-of-band or device-agent networks.
  3. Retest interface-map compatibility and required breakouts for each hardware substitution.
  4. Make patch changes and blueprint topology changes part of one reviewed maintenance transaction.

Explanation

Correct Answer

A:

A lasting control should detect the original error before release. Reconcile physical patch records and blueprint cable maps after every rack move or spine port change. That is important in this case because apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. The scenario was: A rack's planned leaf-to-spine cables are reversed at the patch panel, but both interfaces show link up and the team assumes the Apstra cable map must be correct.

Incorrect Answers

B:

Test management-plane connectivity whenever changing out-of-band or device-agent networks. That concerns appliance onboarding management route, while the issue here is cable map topology validation. Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

C:

Blueprint build requires assigning a compatible interface map that links each device profile's physical interfaces to the logical port roles. For this issue, compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

D:

Make patch changes and blueprint topology changes part of one reviewed maintenance transaction. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

Question 446

A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Managed fabric switches and generic attached systems have different operational roles, with generic systems modeling external endpoint connectivity rather than switch control.
  2. The managed device lifecycle requires supported device agent readiness and control connectivity before the controller can safely deliver its intended configuration.
  3. Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.
  4. Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

Explanation

Correct Answer

D:

The fault is not established by a generic firewall symptom alone. Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

Incorrect Answers

A:

Managed fabric switches and generic attached systems have different operational roles, with generic systems modeling external endpoint connectivity rather than switch control. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

B:

The managed device lifecycle requires supported device agent readiness and control connectivity before the controller can safely deliver its intended configuration. That concerns agent installation before configuration deployment, while the issue here is cable map topology validation. Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

C:

Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. For this issue, compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

Question 447

A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment. Which configuration or operational action MOST directly addresses the problem?

  1. Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.
  2. Inspect the staged and uncommitted diffs, satisfy validations and perform the approved commit before testing the live switch.
  3. Review the selected mode and platform prerequisites, inspect generated configuration impact and follow the approved staged onboarding procedure.
  4. Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

Explanation

Correct Answer

D:

This action directly fixes the documented constraint: Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. Apply it to the reported case: A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment. Then verify: The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing.

Incorrect Answers

A:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. However, the present correction decision is grounded in: A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment. For this issue, compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

B:

Inspect the staged and uncommitted diffs, satisfy validations and perform the approved commit before testing the live switch. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

C:

Review the selected mode and platform prerequisites, inspect generated configuration impact and follow the approved staged onboarding procedure. That concerns build deploy mode choice for device control rather than cable map topology validation. The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing.

Question 448

A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment. The team proposes: Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections. Which data-center or operational principle BEST justifies that choice?

  1. Intention and reality must be reconciled; blindly suppressing a cabling anomaly does not establish which network topology is correct.
  2. Ethernet carrier is a local interface signal, not proof of conformance with a modeled fabric topology.
  3. Data-plane service success cannot certify that the controller can securely reach its managed node.
  4. A valid high-level topology does not eliminate the need for correct concrete switch port bindings.

Explanation

Correct Answer

B:

This principle links classification and policy semantics to the relevant failure. Ethernet carrier is a local interface signal, not proof of conformance with a modeled fabric topology. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. The remedy under discussion is: Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

Incorrect Answers

A:

A topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic. However, the present principle decision is grounded in: A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment. For this issue, compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

C:

Data-plane service success cannot certify that the controller can securely reach its managed node. That concerns appliance onboarding management route rather than cable map topology validation. The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing.

D:

Blueprint build requires assigning a compatible interface map that links each device profile's physical interfaces to the logical port roles. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

Question 449

A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment. After applying this change—Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.—which observation BEST demonstrates success?

  1. The modeled endpoint has its intended link connectivity without being incorrectly treated as a switch requiring an Apstra device agent.
  2. The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing.
  3. The expected device shows a healthy Apstra agent and proceeds to deploy without losing management connectivity.
  4. Inventory and blueprint bindings agree with actual rack labels, and the intended switch receives the correct configuration during deployment.

Explanation

Correct Answer

B:

The criterion directly exercises the affected flow or security object: The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing. The original condition was: A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment. The relevant correction is: Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

Incorrect Answers

A:

The modeled endpoint has its intended link connectivity without being incorrectly treated as a switch requiring an Apstra device agent. That concerns managed versus generic system classification, while the issue here is cable map topology validation. Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

C:

The expected device shows a healthy Apstra agent and proceeds to deploy without losing management connectivity. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

D:

Inventory and blueprint bindings agree with actual rack labels, and the intended switch receives the correct configuration during deployment. That concerns discovering and binding device serial IDs rather than cable map topology validation. The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing.

Question 450

A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include resource allocation checks in the staged build acceptance sequence.
  2. Reconcile physical patch records and blueprint cable maps after every rack move or spine port change.
  3. Document deploy-mode assumptions and recovery steps for greenfield and brownfield device introduction.
  4. Distinguish rendered preview, uncommitted intent and active configuration in commissioning records.

Explanation

Correct Answer

B:

This control reduces recurrence of the same class of failure: Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. Apply the recurring practice: Reconcile physical patch records and blueprint cable maps after every rack move or spine port change. The previous example was: A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment.

Incorrect Answers

A:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

C:

The supported Apstra deployment mode and device state determine how intent configuration is introduced and reconciled with the current platform. For this issue, compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

D:

Distinguish rendered preview, uncommitted intent and active configuration in commissioning records. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. Specifically for the prevention question, the case to validate is: A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests