McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 46

Question 450

A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include resource allocation checks in the staged build acceptance sequence.
  2. Reconcile physical patch records and blueprint cable maps after every rack move or spine port change.
  3. Document deploy-mode assumptions and recovery steps for greenfield and brownfield device introduction.
  4. Distinguish rendered preview, uncommitted intent and active configuration in commissioning records.

Explanation

Correct Answer

B:

This control reduces recurrence of the same class of failure: Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. Apply the recurring practice: Reconcile physical patch records and blueprint cable maps after every rack move or spine port change. The previous example was: A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment.

Incorrect Answers

A:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.

C:

The supported Apstra deployment mode and device state determine how intent configuration is introduced and reconciled with the current platform. For this issue, compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.

D:

Distinguish rendered preview, uncommitted intent and active configuration in commissioning records. Here, apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. Specifically for the prevention question, the case to validate is: A new leaf is connected to a spare spine port outside its assigned topology and the build dashboard reports cabling anomalies before deployment.

Question 451

A builder expects a leaf to appear active immediately after discovery, although it still has unresolved cabling and interface-map requirements. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.
  2. Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.
  3. The supported Apstra deployment mode and device state determine how intent configuration is introduced and reconciled with the current platform.
  4. Staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes.

Explanation

Correct Answer

A:

Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. The selected device transitions through the documented valid states and its active configuration matches the committed blueprint.

Incorrect Answers

B:

Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. That concerns appliance onboarding management route, while the issue here is device state transitions during build. Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

C:

The supported Apstra deployment mode and device state determine how intent configuration is introduced and reconciled with the current platform. For this issue, review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

D:

Staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

Question 452

A builder expects a leaf to appear active immediately after discovery, although it still has unresolved cabling and interface-map requirements. Which configuration or operational action MOST directly addresses the problem?

  1. Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.
  2. Inspect active task progress and the failed device operation, resolve the supported configuration issue and verify final active state.
  3. Complete the vendor-supported agent setup and verify management transport and health, then retry the staged deployment checks.
  4. Inspect discovered system identifiers and serials, verify their physical rack locations and bind only the approved device to each staged blueprint role.

Explanation

Correct Answer

A:

Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action. The target behavior is demonstrated when the selected device transitions through the documented valid states and its active configuration matches the committed blueprint.

Incorrect Answers

B:

Inspect active task progress and the failed device operation, resolve the supported configuration issue and verify final active state. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

C:

Complete the vendor-supported agent setup and verify management transport and health, then retry the staged deployment checks. That concerns agent installation before configuration deployment rather than device state transitions during build. The selected device transitions through the documented valid states and its active configuration matches the committed blueprint.

D:

Correct managed device identity binds each blueprint node to its intended physical hardware and prevents configuration deployment to the wrong rack. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

Question 453

A builder expects a leaf to appear active immediately after discovery, although it still has unresolved cabling and interface-map requirements. The team proposes: Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action. Which data-center or operational principle BEST justifies that choice?

  1. Correct cabling and device models are necessary but insufficient when the routed topology lacks unique addressing and identifiers.
  2. A valid high-level topology does not eliminate the need for correct concrete switch port bindings.
  3. Network deployment state must be judged from lifecycle evidence rather than the mere presence of a device in inventory.
  4. Ethernet carrier is a local interface signal, not proof of conformance with a modeled fabric topology.

Explanation

Correct Answer

C:

Network deployment state must be judged from lifecycle evidence rather than the mere presence of a device in inventory. It justifies the proposed change (Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.) for the precise reported case: A builder expects a leaf to appear active immediately after discovery, although it still has unresolved cabling and interface-map requirements.

Incorrect Answers

A:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. For this issue, review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

B:

A valid high-level topology does not eliminate the need for correct concrete switch port bindings. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

D:

Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

Question 454

A builder expects a leaf to appear active immediately after discovery, although it still has unresolved cabling and interface-map requirements. After applying this change—Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.—which observation BEST demonstrates success?

  1. The selected device transitions through the documented valid states and its active configuration matches the committed blueprint.
  2. The active blueprint revision and device running configuration agree with the newly approved fabric role settings.
  3. The modeled endpoint has its intended link connectivity without being incorrectly treated as a switch requiring an Apstra device agent.
  4. Apstra completes the device management handshake and gathers current state while tenant forwarding policies remain unchanged.

Explanation

Correct Answer

A:

The configuration is not validated merely by a successful commit. The selected device transitions through the documented valid states and its active configuration matches the committed blueprint. Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

Incorrect Answers

B:

Staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes. For this issue, review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

C:

The modeled endpoint has its intended link connectivity without being incorrectly treated as a switch requiring an Apstra device agent. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

D:

Apstra completes the device management handshake and gathers current state while tenant forwarding policies remain unchanged. That concerns appliance onboarding management route rather than device state transitions during build. The selected device transitions through the documented valid states and its active configuration matches the committed blueprint.

Question 455

A builder expects a leaf to appear active immediately after discovery, although it still has unresolved cabling and interface-map requirements. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Require serial and rack-location reconciliation during device onboarding and replacement.
  2. Include agent version and management-channel prerequisites in leaf onboarding checklists.
  3. Gate cutover approval on observed device readiness, deployment task completion and active-state validation.
  4. Monitor and archive deployment task outcomes before closing change tickets.

Explanation

Correct Answer

C:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Gate cutover approval on observed device readiness, deployment task completion and active-state validation. Network deployment state must be judged from lifecycle evidence rather than the mere presence of a device in inventory.

Incorrect Answers

A:

Correct managed device identity binds each blueprint node to its intended physical hardware and prevents configuration deployment to the wrong rack. For the current prevention question, the evidence instead states: A builder expects a leaf to appear active immediately after discovery, although it still has unresolved cabling and interface-map requirements. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

B:

Include agent version and management-channel prerequisites in leaf onboarding checklists. That concerns agent installation before configuration deployment, while the issue here is device state transitions during build. Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

D:

Monitor and archive deployment task outcomes before closing change tickets. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. Specifically for the prevention question, the case to validate is: A builder expects a leaf to appear active immediately after discovery, although it still has unresolved cabling and interface-map requirements.

Question 456

An operations dashboard shows a partially staged managed switch and a project team marks deployment complete without checking its device lifecycle state. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Blueprint build requires assigning a compatible interface map that links each device profile's physical interfaces to the logical port roles.
  2. Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.
  3. Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.
  4. Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

Explanation

Correct Answer

D:

The decisive cause is apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

Incorrect Answers

A:

Blueprint build requires assigning a compatible interface map that links each device profile's physical interfaces to the logical port roles. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

B:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. That concerns build resource assignments before deploy, while the issue here is device state transitions during build. Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

C:

Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. For this issue, review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

Question 457

An operations dashboard shows a partially staged managed switch and a project team marks deployment complete without checking its device lifecycle state. Which configuration or operational action MOST directly addresses the problem?

  1. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.
  2. Classify compute or storage endpoints as supported generic systems and use the appropriate rack attachments and connectivity templates.
  3. Inspect the staged and uncommitted diffs, satisfy validations and perform the approved commit before testing the live switch.
  4. Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

Explanation

Correct Answer

D:

In this case, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action. The selected device transitions through the documented valid states and its active configuration matches the committed blueprint.

Incorrect Answers

A:

Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. For this issue, review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

B:

Classify compute or storage endpoints as supported generic systems and use the appropriate rack attachments and connectivity templates. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

C:

Inspect the staged and uncommitted diffs, satisfy validations and perform the approved commit before testing the live switch. That concerns safe staged versus deployed device configuration rather than device state transitions during build. The selected device transitions through the documented valid states and its active configuration matches the committed blueprint.

Question 458

An operations dashboard shows a partially staged managed switch and a project team marks deployment complete without checking its device lifecycle state. The team proposes: Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action. Which data-center or operational principle BEST justifies that choice?

  1. Similar model names and IP addresses do not establish the unique identity of a managed physical fabric device.
  2. Fabric automation cannot reliably configure a device it has not fully enrolled and connected as a managed endpoint.
  3. Network deployment state must be judged from lifecycle evidence rather than the mere presence of a device in inventory.
  4. Automation action submission and confirmed fleet-wide enforcement are different operational milestones.

Explanation

Correct Answer

C:

An operations dashboard shows a partially staged managed switch and a project team marks deployment complete without checking its device lifecycle state. The central principle is network deployment state must be judged from lifecycle evidence rather than the mere presence of a device in inventory. Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

Incorrect Answers

A:

Correct managed device identity binds each blueprint node to its intended physical hardware and prevents configuration deployment to the wrong rack. For this issue, review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

B:

Fabric automation cannot reliably configure a device it has not fully enrolled and connected as a managed endpoint. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

D:

A successful request to deploy does not prove completion; Apstra task state and device-level error details determine the actual result. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

Question 459

An operations dashboard shows a partially staged managed switch and a project team marks deployment complete without checking its device lifecycle state. After applying this change—Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.—which observation BEST demonstrates success?

  1. The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing.
  2. Observed connections and staged expected interfaces agree without leaving an undocumented exception in the network model.
  3. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.
  4. The selected device transitions through the documented valid states and its active configuration matches the committed blueprint.

Explanation

Correct Answer

D:

The selected device transitions through the documented valid states and its active configuration matches the committed blueprint. That tests the recommended change (Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.) against the original case: An operations dashboard shows a partially staged managed switch and a project team marks deployment complete without checking its device lifecycle state.

Incorrect Answers

A:

The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing. That concerns cable map topology validation, while the issue here is device state transitions during build. Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

B:

A topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic. For this issue, review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

C:

The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed. Here, apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

Question 460

An operations dashboard shows a partially staged managed switch and a project team marks deployment complete without checking its device lifecycle state. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Distinguish rendered preview, uncommitted intent and active configuration in commissioning records.
  2. Review endpoint versus fabric-node roles before importing rack inventory.
  3. Test management-plane connectivity whenever changing out-of-band or device-agent networks.
  4. Gate cutover approval on observed device readiness, deployment task completion and active-state validation.

Explanation

Correct Answer

D:

A lasting control should detect the original error before release. Gate cutover approval on observed device readiness, deployment task completion and active-state validation. That is important in this case because apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. The scenario was: An operations dashboard shows a partially staged managed switch and a project team marks deployment complete without checking its device lifecycle state.

Incorrect Answers

A:

The alternative applies to another Juniper security situation: A leaf's generated candidate configuration is visible in the staged blueprint, and a technician believes the connected switch must already be running those changes. That situation concerns staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes. Its key condition is apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

B:

Review endpoint versus fabric-node roles before importing rack inventory. That concerns managed versus generic system classification, while the issue here is device state transitions during build. Review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

C:

Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. However, the present prevention decision is grounded in: An operations dashboard shows a partially staged managed switch and a project team marks deployment complete without checking its device lifecycle state. For this issue, review the device's actual staged readiness indicators, satisfy outstanding identity, map and cabling constraints, then perform the supported deploy action.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests