McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 49

Question 480

A new rack test is scheduled after the configuration is rendered for review but before the blueprint modification is committed and pushed to the devices. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Review endpoint versus fabric-node roles before importing rack inventory.
  2. Distinguish rendered preview, uncommitted intent and active configuration in commissioning records.
  3. Include resource allocation checks in the staged build acceptance sequence.
  4. Require serial and rack-location reconciliation during device onboarding and replacement.

Explanation

Correct Answer

B:

This control reduces recurrence of the same class of failure: Staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes. Apply the recurring practice: Distinguish rendered preview, uncommitted intent and active configuration in commissioning records. The previous example was: A new rack test is scheduled after the configuration is rendered for review but before the blueprint modification is committed and pushed to the devices.

Incorrect Answers

A:

Managed fabric switches and generic attached systems have different operational roles, with generic systems modeling external endpoint connectivity rather than switch control. For the current prevention question, the evidence instead states: A new rack test is scheduled after the configuration is rendered for review but before the blueprint modification is committed and pushed to the devices. Here, staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes.

C:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. However, the present prevention decision is grounded in: A new rack test is scheduled after the configuration is rendered for review but before the blueprint modification is committed and pushed to the devices. For this issue, inspect the staged and uncommitted diffs, satisfy validations and perform the approved commit before testing the live switch.

D:

Require serial and rack-location reconciliation during device onboarding and replacement. Here, staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes.

Question 481

A fabric switch forwards production traffic normally but Apstra cannot establish its management session because its out-of-band gateway and access-control path are incorrect. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.
  2. Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.
  3. A topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.
  4. A successful request to deploy does not prove completion; Apstra task state and device-level error details determine the actual result.

Explanation

Correct Answer

B:

Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. Apstra completes the device management handshake and gathers current state while tenant forwarding policies remain unchanged.

Incorrect Answers

A:

Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

C:

A topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic. For this issue, verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

D:

A successful request to deploy does not prove completion; Apstra task state and device-level error details determine the actual result. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

Question 482

A fabric switch forwards production traffic normally but Apstra cannot establish its management session because its out-of-band gateway and access-control path are incorrect. Which configuration or operational action MOST directly addresses the problem?

  1. Review the selected mode and platform prerequisites, inspect generated configuration impact and follow the approved staged onboarding procedure.
  2. Classify compute or storage endpoints as supported generic systems and use the appropriate rack attachments and connectivity templates.
  3. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.
  4. Complete the vendor-supported agent setup and verify management transport and health, then retry the staged deployment checks.

Explanation

Correct Answer

C:

Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication. The target behavior is demonstrated when apstra completes the device management handshake and gathers current state while tenant forwarding policies remain unchanged.

Incorrect Answers

A:

The supported Apstra deployment mode and device state determine how intent configuration is introduced and reconciled with the current platform. For this issue, verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

B:

Classify compute or storage endpoints as supported generic systems and use the appropriate rack attachments and connectivity templates. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

D:

The managed device lifecycle requires supported device agent readiness and control connectivity before the controller can safely deliver its intended configuration. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

Question 483

A fabric switch forwards production traffic normally but Apstra cannot establish its management session because its out-of-band gateway and access-control path are incorrect. The team proposes: Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication. Which data-center or operational principle BEST justifies that choice?

  1. Configuration generation and production activation are separate lifecycle milestones in intent-based operations.
  2. Network deployment state must be judged from lifecycle evidence rather than the mere presence of a device in inventory.
  3. Data-plane service success cannot certify that the controller can securely reach its managed node.
  4. Correct cabling and device models are necessary but insufficient when the routed topology lacks unique addressing and identifiers.

Explanation

Correct Answer

C:

Data-plane service success cannot certify that the controller can securely reach its managed node. It justifies the proposed change (Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.) for the precise reported case: A fabric switch forwards production traffic normally but Apstra cannot establish its management session because its out-of-band gateway and access-control path are incorrect.

Incorrect Answers

A:

Staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes. For this issue, verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

B:

Network deployment state must be judged from lifecycle evidence rather than the mere presence of a device in inventory. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

D:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

Question 484

A fabric switch forwards production traffic normally but Apstra cannot establish its management session because its out-of-band gateway and access-control path are incorrect. After applying this change—Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.—which observation BEST demonstrates success?

  1. The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing.
  2. Observed connections and staged expected interfaces agree without leaving an undocumented exception in the network model.
  3. The staged device profile checks pass and rendered interfaces correspond to the intended cable map and logical roles.
  4. Apstra completes the device management handshake and gathers current state while tenant forwarding policies remain unchanged.

Explanation

Correct Answer

D:

The configuration is not validated merely by a successful commit. Apstra completes the device management handshake and gathers current state while tenant forwarding policies remain unchanged. Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

Incorrect Answers

A:

The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing. That concerns cable map topology validation, while the issue here is appliance onboarding management route. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

B:

A topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic. However, the present verification decision is grounded in: A fabric switch forwards production traffic normally but Apstra cannot establish its management session because its out-of-band gateway and access-control path are incorrect. For this issue, verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

C:

The staged device profile checks pass and rendered interfaces correspond to the intended cable map and logical roles. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

Question 485

A fabric switch forwards production traffic normally but Apstra cannot establish its management session because its out-of-band gateway and access-control path are incorrect. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Test management-plane connectivity whenever changing out-of-band or device-agent networks.
  2. Review endpoint versus fabric-node roles before importing rack inventory.
  3. Include agent version and management-channel prerequisites in leaf onboarding checklists.
  4. Document deploy-mode assumptions and recovery steps for greenfield and brownfield device introduction.

Explanation

Correct Answer

A:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Test management-plane connectivity whenever changing out-of-band or device-agent networks. Data-plane service success cannot certify that the controller can securely reach its managed node.

Incorrect Answers

B:

Review endpoint versus fabric-node roles before importing rack inventory. That concerns managed versus generic system classification, while the issue here is appliance onboarding management route. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

C:

The managed device lifecycle requires supported device agent readiness and control connectivity before the controller can safely deliver its intended configuration. For this issue, verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

D:

Document deploy-mode assumptions and recovery steps for greenfield and brownfield device introduction. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

Question 486

A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.
  2. Staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes.
  3. Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.
  4. Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

Explanation

Correct Answer

A:

The decisive cause is controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

Incorrect Answers

B:

Staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes. That concerns safe staged versus deployed device configuration, while the issue here is appliance onboarding management route. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

C:

Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. For this issue, verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

D:

This choice would be assessed for a different data-center fabric or Apstra operational situation: A blueprint has all expected switch models assigned, but deployment validation fails because loopback and underlay resource allocations are incomplete. Its decisive constraint is controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

Question 487

A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational. Which configuration or operational action MOST directly addresses the problem?

  1. Choose or create a supported interface map for the actual device model, assign it in the staged physical build and validate mapped ports before deploy.
  2. Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.
  3. Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.
  4. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

Explanation

Correct Answer

D:

In this case, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication. Apstra completes the device management handshake and gathers current state while tenant forwarding policies remain unchanged.

Incorrect Answers

A:

Blueprint build requires assigning a compatible interface map that links each device profile's physical interfaces to the logical port roles. For this issue, verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

B:

Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

C:

Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks. That concerns build resource assignments before deploy rather than appliance onboarding management route. Apstra completes the device management handshake and gathers current state while tenant forwarding policies remain unchanged.

Question 488

A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational. The team proposes: Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication. Which data-center or operational principle BEST justifies that choice?

  1. Fabric automation cannot reliably configure a device it has not fully enrolled and connected as a managed endpoint.
  2. Controlled onboarding requires an explicit management handoff plan, not only a working IP address and available credentials.
  3. Data-plane service success cannot certify that the controller can securely reach its managed node.
  4. Discovering a connected device does not make it an Apstra-managed routing or switching node.

Explanation

Correct Answer

C:

A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational. The central principle is data-plane service success cannot certify that the controller can securely reach its managed node. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

Incorrect Answers

A:

The managed device lifecycle requires supported device agent readiness and control connectivity before the controller can safely deliver its intended configuration. However, the present principle decision is grounded in: A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational. For this issue, verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

B:

Controlled onboarding requires an explicit management handoff plan, not only a working IP address and available credentials. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

D:

Managed fabric switches and generic attached systems have different operational roles, with generic systems modeling external endpoint connectivity rather than switch control. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

Question 489

A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational. After applying this change—Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.—which observation BEST demonstrates success?

  1. Apstra completes the device management handshake and gathers current state while tenant forwarding policies remain unchanged.
  2. The selected device transitions through the documented valid states and its active configuration matches the committed blueprint.
  3. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.
  4. Inventory and blueprint bindings agree with actual rack labels, and the intended switch receives the correct configuration during deployment.

Explanation

Correct Answer

A:

Apstra completes the device management handshake and gathers current state while tenant forwarding policies remain unchanged. That tests the recommended change (Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.) against the original case: A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational.

Incorrect Answers

B:

Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. However, the present verification decision is grounded in: A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational. For this issue, verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

C:

The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. Specifically for the verification question, the case to validate is: A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational.

D:

Inventory and blueprint bindings agree with actual rack labels, and the intended switch receives the correct configuration during deployment. That concerns discovering and binding device serial IDs rather than appliance onboarding management route. Apstra completes the device management handshake and gathers current state while tenant forwarding policies remain unchanged.

Question 490

A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Test management-plane connectivity whenever changing out-of-band or device-agent networks.
  2. Retest interface-map compatibility and required breakouts for each hardware substitution.
  3. Reconcile physical patch records and blueprint cable maps after every rack move or spine port change.
  4. Distinguish rendered preview, uncommitted intent and active configuration in commissioning records.

Explanation

Correct Answer

A:

A lasting control should detect the original error before release. Test management-plane connectivity whenever changing out-of-band or device-agent networks. That is important in this case because controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. The scenario was: A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational.

Incorrect Answers

B:

Retest interface-map compatibility and required breakouts for each hardware substitution. That concerns interface map assignment for new hardware, while the issue here is appliance onboarding management route. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

C:

Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. For this issue, verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

D:

Distinguish rendered preview, uncommitted intent and active configuration in commissioning records. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests