McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 50

Question 490

A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Test management-plane connectivity whenever changing out-of-band or device-agent networks.
  2. Retest interface-map compatibility and required breakouts for each hardware substitution.
  3. Reconcile physical patch records and blueprint cable maps after every rack move or spine port change.
  4. Distinguish rendered preview, uncommitted intent and active configuration in commissioning records.

Explanation

Correct Answer

A:

A lasting control should detect the original error before release. Test management-plane connectivity whenever changing out-of-band or device-agent networks. That is important in this case because controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. The scenario was: A new Apstra agent stops reporting after a management VLAN migration while spine-to-leaf data-plane interfaces remain operational.

Incorrect Answers

B:

Retest interface-map compatibility and required breakouts for each hardware substitution. That concerns interface map assignment for new hardware, while the issue here is appliance onboarding management route. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

C:

Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. For this issue, verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

D:

Distinguish rendered preview, uncommitted intent and active configuration in commissioning records. Here, controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.

Question 491

A blueprint has all expected switch models assigned, but deployment validation fails because loopback and underlay resource allocations are incomplete. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Blueprint build requires assigning a compatible interface map that links each device profile's physical interfaces to the logical port roles.
  2. Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.
  3. A topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.
  4. Correct managed device identity binds each blueprint node to its intended physical hardware and prevents configuration deployment to the wrong rack.

Explanation

Correct Answer

B:

The fault is not established by a generic firewall symptom alone. Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

Incorrect Answers

A:

Blueprint build requires assigning a compatible interface map that links each device profile's physical interfaces to the logical port roles. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

C:

A topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic. For this issue, inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

D:

Correct managed device identity binds each blueprint node to its intended physical hardware and prevents configuration deployment to the wrong rack. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

Question 492

A blueprint has all expected switch models assigned, but deployment validation fails because loopback and underlay resource allocations are incomplete. Which configuration or operational action MOST directly addresses the problem?

  1. Review the selected mode and platform prerequisites, inspect generated configuration impact and follow the approved staged onboarding procedure.
  2. Inspect the staged and uncommitted diffs, satisfy validations and perform the approved commit before testing the live switch.
  3. Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.
  4. Inspect active task progress and the failed device operation, resolve the supported configuration issue and verify final active state.

Explanation

Correct Answer

C:

This action directly fixes the documented constraint: Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. Apply it to the reported case: A blueprint has all expected switch models assigned, but deployment validation fails because loopback and underlay resource allocations are incomplete. Then verify: The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.

Incorrect Answers

A:

The supported Apstra deployment mode and device state determine how intent configuration is introduced and reconciled with the current platform. For this issue, inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

B:

Inspect the staged and uncommitted diffs, satisfy validations and perform the approved commit before testing the live switch. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

D:

A successful request to deploy does not prove completion; Apstra task state and device-level error details determine the actual result. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

Question 493

A blueprint has all expected switch models assigned, but deployment validation fails because loopback and underlay resource allocations are incomplete. The team proposes: Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks. Which data-center or operational principle BEST justifies that choice?

  1. Network deployment state must be judged from lifecycle evidence rather than the mere presence of a device in inventory.
  2. Correct cabling and device models are necessary but insufficient when the routed topology lacks unique addressing and identifiers.
  3. Ethernet carrier is a local interface signal, not proof of conformance with a modeled fabric topology.
  4. Data-plane service success cannot certify that the controller can securely reach its managed node.

Explanation

Correct Answer

B:

This principle links classification and policy semantics to the relevant failure. Correct cabling and device models are necessary but insufficient when the routed topology lacks unique addressing and identifiers. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. The remedy under discussion is: Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

Incorrect Answers

A:

Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. However, the present principle decision is grounded in: A blueprint has all expected switch models assigned, but deployment validation fails because loopback and underlay resource allocations are incomplete. For this issue, inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

C:

Ethernet carrier is a local interface signal, not proof of conformance with a modeled fabric topology. That concerns cable map topology validation rather than build resource assignments before deploy. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.

D:

Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

Question 494

A blueprint has all expected switch models assigned, but deployment validation fails because loopback and underlay resource allocations are incomplete. After applying this change—Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.—which observation BEST demonstrates success?

  1. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.
  2. Inventory and blueprint bindings agree with actual rack labels, and the intended switch receives the correct configuration during deployment.
  3. The staged device profile checks pass and rendered interfaces correspond to the intended cable map and logical roles.
  4. The modeled endpoint has its intended link connectivity without being incorrectly treated as a switch requiring an Apstra device agent.

Explanation

Correct Answer

A:

The criterion directly exercises the affected flow or security object: The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed. The original condition was: A blueprint has all expected switch models assigned, but deployment validation fails because loopback and underlay resource allocations are incomplete. The relevant correction is: Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

Incorrect Answers

B:

Correct managed device identity binds each blueprint node to its intended physical hardware and prevents configuration deployment to the wrong rack. For this issue, inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

C:

The staged device profile checks pass and rendered interfaces correspond to the intended cable map and logical roles. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

D:

The modeled endpoint has its intended link connectivity without being incorrectly treated as a switch requiring an Apstra device agent. That concerns managed versus generic system classification rather than build resource assignments before deploy. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.

Question 495

A blueprint has all expected switch models assigned, but deployment validation fails because loopback and underlay resource allocations are incomplete. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include resource allocation checks in the staged build acceptance sequence.
  2. Document deploy-mode assumptions and recovery steps for greenfield and brownfield device introduction.
  3. Distinguish rendered preview, uncommitted intent and active configuration in commissioning records.
  4. Monitor and archive deployment task outcomes before closing change tickets.

Explanation

Correct Answer

A:

This control reduces recurrence of the same class of failure: Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. Apply the recurring practice: Include resource allocation checks in the staged build acceptance sequence. The previous example was: A blueprint has all expected switch models assigned, but deployment validation fails because loopback and underlay resource allocations are incomplete.

Incorrect Answers

B:

Document deploy-mode assumptions and recovery steps for greenfield and brownfield device introduction. That concerns build deploy mode choice for device control, while the issue here is build resource assignments before deploy. Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

C:

Staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes. For this issue, inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

D:

Monitor and archive deployment task outcomes before closing change tickets. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

Question 496

A new rack is physically ready yet the fabric build remains blocked by an unresolved ASN pool selection and missing interface address assignments. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint.
  2. Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding.
  3. Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.
  4. Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

Explanation

Correct Answer

C:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.

Incorrect Answers

A:

Apstra uses planned physical link relationships and observed neighbor data to validate whether actual cabling matches the staged blueprint. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

B:

Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. That concerns appliance onboarding management route, while the issue here is build resource assignments before deploy. Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

D:

Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

Question 497

A new rack is physically ready yet the fabric build remains blocked by an unresolved ASN pool selection and missing interface address assignments. Which configuration or operational action MOST directly addresses the problem?

  1. Classify compute or storage endpoints as supported generic systems and use the appropriate rack attachments and connectivity templates.
  2. Choose or create a supported interface map for the actual device model, assign it in the staged physical build and validate mapped ports before deploy.
  3. Inspect discovered system identifiers and serials, verify their physical rack locations and bind only the approved device to each staged blueprint role.
  4. Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

Explanation

Correct Answer

D:

Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks. The target behavior is demonstrated when the blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.

Incorrect Answers

A:

Managed fabric switches and generic attached systems have different operational roles, with generic systems modeling external endpoint connectivity rather than switch control. For this issue, inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

B:

Choose or create a supported interface map for the actual device model, assign it in the staged physical build and validate mapped ports before deploy. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

C:

Inspect discovered system identifiers and serials, verify their physical rack locations and bind only the approved device to each staged blueprint role. That concerns discovering and binding device serial IDs rather than build resource assignments before deploy. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.

Question 498

A new rack is physically ready yet the fabric build remains blocked by an unresolved ASN pool selection and missing interface address assignments. The team proposes: Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks. Which data-center or operational principle BEST justifies that choice?

  1. Automation action submission and confirmed fleet-wide enforcement are different operational milestones.
  2. Controlled onboarding requires an explicit management handoff plan, not only a working IP address and available credentials.
  3. Configuration generation and production activation are separate lifecycle milestones in intent-based operations.
  4. Correct cabling and device models are necessary but insufficient when the routed topology lacks unique addressing and identifiers.

Explanation

Correct Answer

D:

Correct cabling and device models are necessary but insufficient when the routed topology lacks unique addressing and identifiers. It justifies the proposed change (Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.) for the precise reported case: A new rack is physically ready yet the fabric build remains blocked by an unresolved ASN pool selection and missing interface address assignments.

Incorrect Answers

A:

A successful request to deploy does not prove completion; Apstra task state and device-level error details determine the actual result. For this issue, inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

B:

Controlled onboarding requires an explicit management handoff plan, not only a working IP address and available credentials. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

C:

Configuration generation and production activation are separate lifecycle milestones in intent-based operations. That concerns safe staged versus deployed device configuration rather than build resource assignments before deploy. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.

Question 499

A new rack is physically ready yet the fabric build remains blocked by an unresolved ASN pool selection and missing interface address assignments. After applying this change—Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.—which observation BEST demonstrates success?

  1. The selected device transitions through the documented valid states and its active configuration matches the committed blueprint.
  2. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.
  3. The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing.
  4. The expected device shows a healthy Apstra agent and proceeds to deploy without losing management connectivity.

Explanation

Correct Answer

B:

The configuration is not validated merely by a successful commit. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed. Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

Incorrect Answers

A:

The selected device transitions through the documented valid states and its active configuration matches the committed blueprint. That concerns device state transitions during build, while the issue here is build resource assignments before deploy. Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

C:

The cabling mismatch clears and the observed leaf-to-spine neighbor relationships match the approved rack drawing. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.

D:

The expected device shows a healthy Apstra agent and proceeds to deploy without losing management connectivity. That concerns agent installation before configuration deployment rather than build resource assignments before deploy. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.

Question 500

A new rack is physically ready yet the fabric build remains blocked by an unresolved ASN pool selection and missing interface address assignments. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include resource allocation checks in the staged build acceptance sequence.
  2. Review endpoint versus fabric-node roles before importing rack inventory.
  3. Require serial and rack-location reconciliation during device onboarding and replacement.
  4. Retest interface-map compatibility and required breakouts for each hardware substitution.

Explanation

Correct Answer

A:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Include resource allocation checks in the staged build acceptance sequence. Correct cabling and device models are necessary but insufficient when the routed topology lacks unique addressing and identifiers.

Incorrect Answers

B:

Review endpoint versus fabric-node roles before importing rack inventory. That concerns managed versus generic system classification, while the issue here is build resource assignments before deploy. Inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

C:

Correct managed device identity binds each blueprint node to its intended physical hardware and prevents configuration deployment to the wrong rack. However, the present prevention decision is grounded in: A new rack is physically ready yet the fabric build remains blocked by an unresolved ASN pool selection and missing interface address assignments. For this issue, inspect the build validation blockers, attach approved IP/ASN pools, allocate missing resources and rerun predeploy checks.

D:

Retest interface-map compatibility and required breakouts for each hardware substitution. Here, successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. Specifically for the prevention question, the case to validate is: A new rack is physically ready yet the fabric build remains blocked by an unresolved ASN pool selection and missing interface address assignments.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests