McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 52

Question 510

A network change report says configuration was activated on every leaf, but the task history identifies a rejected command on one device. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Gate cutover approval on observed device readiness, deployment task completion and active-state validation.
  2. Monitor and archive deployment task outcomes before closing change tickets.
  3. Include resource allocation checks in the staged build acceptance sequence.
  4. Include agent version and management-channel prerequisites in leaf onboarding checklists.

Explanation

Correct Answer

B:

This control reduces recurrence of the same class of failure: A successful request to deploy does not prove completion; Apstra task state and device-level error details determine the actual result. Apply the recurring practice: Monitor and archive deployment task outcomes before closing change tickets. The previous example was: A network change report says configuration was activated on every leaf, but the task history identifies a rejected command on one device.

Incorrect Answers

A:

The alternative applies to another Juniper security situation: A builder expects a leaf to appear active immediately after discovery, although it still has unresolved cabling and interface-map requirements. That situation concerns apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. Its key condition is a successful request to deploy does not prove completion; Apstra task state and device-level error details determine the actual result.

C:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. For this issue, inspect active task progress and the failed device operation, resolve the supported configuration issue and verify final active state.

D:

Include agent version and management-channel prerequisites in leaf onboarding checklists. Here, a successful request to deploy does not prove completion; Apstra task state and device-level error details determine the actual result.

Question 511

A leaf is correctly connected to an authorized alternate spine port after maintenance, but the blueprint still expects the original endpoint and reports a persistent mismatch. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. The supported Apstra deployment mode and device state determine how intent configuration is introduced and reconciled with the current platform.
  2. Managed fabric switches and generic attached systems have different operational roles, with generic systems modeling external endpoint connectivity rather than switch control.
  3. A successful request to deploy does not prove completion; Apstra task state and device-level error details determine the actual result.
  4. A topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

Explanation

Correct Answer

D:

A topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic. Observed connections and staged expected interfaces agree without leaving an undocumented exception in the network model.

Incorrect Answers

A:

The supported Apstra deployment mode and device state determine how intent configuration is introduced and reconciled with the current platform. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

B:

Managed fabric switches and generic attached systems have different operational roles, with generic systems modeling external endpoint connectivity rather than switch control. That concerns managed versus generic system classification, while the issue here is initial cable mismatch versus intentional alternate topology. Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

C:

A successful request to deploy does not prove completion; Apstra task state and device-level error details determine the actual result. For this issue, decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

Question 512

A leaf is correctly connected to an authorized alternate spine port after maintenance, but the blueprint still expects the original endpoint and reports a persistent mismatch. Which configuration or operational action MOST directly addresses the problem?

  1. Complete the vendor-supported agent setup and verify management transport and health, then retry the staged deployment checks.
  2. Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections.
  3. Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.
  4. Verify management addressing, gateway, DNS or certificate dependencies where applicable and least-privilege firewall reachability to restore agent communication.

Explanation

Correct Answer

C:

Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency. The target behavior is demonstrated when observed connections and staged expected interfaces agree without leaving an undocumented exception in the network model.

Incorrect Answers

A:

The managed device lifecycle requires supported device agent readiness and control connectivity before the controller can safely deliver its intended configuration. For this issue, decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

B:

Compare the blueprint cable map with the discovered endpoint interfaces and correct or explicitly revise the intended physical connections. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

D:

Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

Question 513

A leaf is correctly connected to an authorized alternate spine port after maintenance, but the blueprint still expects the original endpoint and reports a persistent mismatch. The team proposes: Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency. Which data-center or operational principle BEST justifies that choice?

  1. Network deployment state must be judged from lifecycle evidence rather than the mere presence of a device in inventory.
  2. Intention and reality must be reconciled; blindly suppressing a cabling anomaly does not establish which network topology is correct.
  3. Similar model names and IP addresses do not establish the unique identity of a managed physical fabric device.
  4. Correct cabling and device models are necessary but insufficient when the routed topology lacks unique addressing and identifiers.

Explanation

Correct Answer

B:

Intention and reality must be reconciled; blindly suppressing a cabling anomaly does not establish which network topology is correct. It justifies the proposed change (Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.) for the precise reported case: A leaf is correctly connected to an authorized alternate spine port after maintenance, but the blueprint still expects the original endpoint and reports a persistent mismatch.

Incorrect Answers

A:

Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. For this issue, decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

C:

Similar model names and IP addresses do not establish the unique identity of a managed physical fabric device. That concerns discovering and binding device serial IDs rather than initial cable mismatch versus intentional alternate topology. Observed connections and staged expected interfaces agree without leaving an undocumented exception in the network model.

D:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

Question 514

A leaf is correctly connected to an authorized alternate spine port after maintenance, but the blueprint still expects the original endpoint and reports a persistent mismatch. After applying this change—Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.—which observation BEST demonstrates success?

  1. The target leaf reaches an active managed condition with its required management access intact and intended fabric settings enforced.
  2. The active blueprint revision and device running configuration agree with the newly approved fabric role settings.
  3. Observed connections and staged expected interfaces agree without leaving an undocumented exception in the network model.
  4. The modeled endpoint has its intended link connectivity without being incorrectly treated as a switch requiring an Apstra device agent.

Explanation

Correct Answer

C:

The configuration is not validated merely by a successful commit. Observed connections and staged expected interfaces agree without leaving an undocumented exception in the network model. A topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

Incorrect Answers

A:

The target leaf reaches an active managed condition with its required management access intact and intended fabric settings enforced. That concerns build deploy mode choice for device control, while the issue here is initial cable mismatch versus intentional alternate topology. Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

B:

Staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes. For this issue, decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

D:

The modeled endpoint has its intended link connectivity without being incorrectly treated as a switch requiring an Apstra device agent. That concerns managed versus generic system classification rather than initial cable mismatch versus intentional alternate topology. Observed connections and staged expected interfaces agree without leaving an undocumented exception in the network model.

Question 515

A leaf is correctly connected to an authorized alternate spine port after maintenance, but the blueprint still expects the original endpoint and reports a persistent mismatch. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Test management-plane connectivity whenever changing out-of-band or device-agent networks.
  2. Reconcile physical patch records and blueprint cable maps after every rack move or spine port change.
  3. Make patch changes and blueprint topology changes part of one reviewed maintenance transaction.
  4. Include agent version and management-channel prerequisites in leaf onboarding checklists.

Explanation

Correct Answer

C:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Make patch changes and blueprint topology changes part of one reviewed maintenance transaction. Intention and reality must be reconciled; blindly suppressing a cabling anomaly does not establish which network topology is correct.

Incorrect Answers

A:

The alternative applies to another Juniper security situation: A fabric switch forwards production traffic normally but Apstra cannot establish its management session because its out-of-band gateway and access-control path are incorrect. That situation concerns controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. Its key condition is a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

B:

Reconcile physical patch records and blueprint cable maps after every rack move or spine port change. That concerns cable map topology validation, while the issue here is initial cable mismatch versus intentional alternate topology. Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

D:

Include agent version and management-channel prerequisites in leaf onboarding checklists. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

Question 516

A wiring team changes one redundant uplink plan and updates the patch spreadsheet but not the Apstra physical model before deployment. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric.
  2. Correct managed device identity binds each blueprint node to its intended physical hardware and prevents configuration deployment to the wrong rack.
  3. A topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.
  4. Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions.

Explanation

Correct Answer

C:

The decisive cause is a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic. Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

Incorrect Answers

A:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. For the current diagnosis question, the evidence instead states: A wiring team changes one redundant uplink plan and updates the patch spreadsheet but not the Apstra physical model before deployment. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

B:

Correct managed device identity binds each blueprint node to its intended physical hardware and prevents configuration deployment to the wrong rack. That concerns discovering and binding device serial IDs, while the issue here is initial cable mismatch versus intentional alternate topology. Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

D:

Apstra distinguishes discovered, staged, deployable and active device conditions based on build prerequisites and completed management actions. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

Question 517

A wiring team changes one redundant uplink plan and updates the patch spreadsheet but not the Apstra physical model before deployment. Which configuration or operational action MOST directly addresses the problem?

  1. Classify compute or storage endpoints as supported generic systems and use the appropriate rack attachments and connectivity templates.
  2. Inspect the staged and uncommitted diffs, satisfy validations and perform the approved commit before testing the live switch.
  3. Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.
  4. Review the selected mode and platform prerequisites, inspect generated configuration impact and follow the approved staged onboarding procedure.

Explanation

Correct Answer

C:

In this case, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic. Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency. Observed connections and staged expected interfaces agree without leaving an undocumented exception in the network model.

Incorrect Answers

A:

Managed fabric switches and generic attached systems have different operational roles, with generic systems modeling external endpoint connectivity rather than switch control. For this issue, decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

B:

Inspect the staged and uncommitted diffs, satisfy validations and perform the approved commit before testing the live switch. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

D:

The supported Apstra deployment mode and device state determine how intent configuration is introduced and reconciled with the current platform. For the current correction question, the evidence instead states: A wiring team changes one redundant uplink plan and updates the patch spreadsheet but not the Apstra physical model before deployment. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

Question 518

A wiring team changes one redundant uplink plan and updates the patch spreadsheet but not the Apstra physical model before deployment. The team proposes: Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency. Which data-center or operational principle BEST justifies that choice?

  1. Data-plane service success cannot certify that the controller can securely reach its managed node.
  2. Ethernet carrier is a local interface signal, not proof of conformance with a modeled fabric topology.
  3. Intention and reality must be reconciled; blindly suppressing a cabling anomaly does not establish which network topology is correct.
  4. Fabric automation cannot reliably configure a device it has not fully enrolled and connected as a managed endpoint.

Explanation

Correct Answer

C:

A wiring team changes one redundant uplink plan and updates the patch spreadsheet but not the Apstra physical model before deployment. The central principle is intention and reality must be reconciled; blindly suppressing a cabling anomaly does not establish which network topology is correct. Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

Incorrect Answers

A:

Controller-to-device management reachability uses its own routed and authorized path separate from the switching fabric's ordinary tenant forwarding. For this issue, decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

B:

Ethernet carrier is a local interface signal, not proof of conformance with a modeled fabric topology. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

D:

The managed device lifecycle requires supported device agent readiness and control connectivity before the controller can safely deliver its intended configuration. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

Question 519

A wiring team changes one redundant uplink plan and updates the patch spreadsheet but not the Apstra physical model before deployment. After applying this change—Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.—which observation BEST demonstrates success?

  1. Observed connections and staged expected interfaces agree without leaving an undocumented exception in the network model.
  2. The blueprint reports valid unique device and link resource assignments and the intended configuration can be committed.
  3. The staged device profile checks pass and rendered interfaces correspond to the intended cable map and logical roles.
  4. The selected device transitions through the documented valid states and its active configuration matches the committed blueprint.

Explanation

Correct Answer

A:

Observed connections and staged expected interfaces agree without leaving an undocumented exception in the network model. That tests the recommended change (Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.) against the original case: A wiring team changes one redundant uplink plan and updates the patch spreadsheet but not the Apstra physical model before deployment.

Incorrect Answers

B:

Successful device deployment depends on the required address and identifier resources being assigned consistently to the modeled fabric. For this issue, decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

C:

The staged device profile checks pass and rendered interfaces correspond to the intended cable map and logical roles. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

D:

The selected device transitions through the documented valid states and its active configuration matches the committed blueprint. That concerns device state transitions during build rather than initial cable mismatch versus intentional alternate topology. Observed connections and staged expected interfaces agree without leaving an undocumented exception in the network model.

Question 520

A wiring team changes one redundant uplink plan and updates the patch spreadsheet but not the Apstra physical model before deployment. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Distinguish rendered preview, uncommitted intent and active configuration in commissioning records.
  2. Review endpoint versus fabric-node roles before importing rack inventory.
  3. Document deploy-mode assumptions and recovery steps for greenfield and brownfield device introduction.
  4. Make patch changes and blueprint topology changes part of one reviewed maintenance transaction.

Explanation

Correct Answer

D:

A lasting control should detect the original error before release. Make patch changes and blueprint topology changes part of one reviewed maintenance transaction. That is important in this case because a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic. The scenario was: A wiring team changes one redundant uplink plan and updates the patch spreadsheet but not the Apstra physical model before deployment.

Incorrect Answers

A:

Staged modeled changes and rendered previews are not automatically active until the supported deployment or commit workflow completes. Here, a topology validation alert can mean observed cabling differs from the declared blueprint even when the chosen physical link could otherwise carry traffic.

B:

Review endpoint versus fabric-node roles before importing rack inventory. That concerns managed versus generic system classification, while the issue here is initial cable mismatch versus intentional alternate topology. Decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

C:

The supported Apstra deployment mode and device state determine how intent configuration is introduced and reconciled with the current platform. For this issue, decide whether the physical patch or approved intent should change, then align the cable map and revalidate the leaf-spine adjacency.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests