McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 69

Question 680

A staged multitenancy change passes initial validation but one leaf reports an execution error during the active task, and the service owner announces completion prematurely. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Add task-status and targeted service checks after every operational blueprint commit.
  2. Record descriptive commit summaries and preserve sufficient revision retention for operational rollback objectives.
  3. Monitor revision retention and require meaningful descriptions for significant blueprint commits.
  4. Run capacity and link-plan checks before every add-rack operation.

Explanation

Correct Answer

A:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Add task-status and targeted service checks after every operational blueprint commit. Successful submission of an automation change is not evidence that its entire distributed deployment has finished successfully.

Incorrect Answers

B:

Record descriptive commit summaries and preserve sufficient revision retention for operational rollback objectives. That concerns time Voyager returning to earlier revision, while the issue here is active task completion versus successful commit intention. Check task status and per-device results, resolve any failed operations and confirm active model and observed device configuration match.

C:

Time Voyager stores retained committed revision checkpoints with descriptions and configurable retention, rather than an unbounded perfect history. However, the present prevention decision is grounded in: A staged multitenancy change passes initial validation but one leaf reports an execution error during the active task, and the service owner announces completion prematurely. For this issue, check task status and per-device results, resolve any failed operations and confirm active model and observed device configuration match.

D:

Run capacity and link-plan checks before every add-rack operation. Here, committing desired intent initiates validated deployment work whose task outcomes and device states must be checked before declaring network convergence.

Question 681

Two applications with separate tenant routing zones accidentally share the default routing table because the new virtual network was attached to the wrong zone. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.
  2. Compute or VMware inventory visibility and the actual fabric connectivity/template association are separate parts of data center service delivery.
  3. An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.
  4. Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries.

Explanation

Correct Answer

C:

The decisive cause is an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

Incorrect Answers

A:

Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

B:

Compute or VMware inventory visibility and the actual fabric connectivity/template association are separate parts of data center service delivery. That concerns VMware inventory integration versus network deployment, while the issue here is routing zone maps to tenant VRF. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

D:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

Question 682

Two applications with separate tenant routing zones accidentally share the default routing table because the new virtual network was attached to the wrong zone. Which configuration or operational action MOST directly addresses the problem?

  1. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.
  2. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.
  3. Create the intended virtual networks for each segment and attach their routed interfaces to the approved routing zone where Layer 3 service is required.
  4. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

Explanation

Correct Answer

A:

In this case, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.

Incorrect Answers

B:

Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

C:

Create the intended virtual networks for each segment and attach their routed interfaces to the approved routing zone where Layer 3 service is required. That concerns virtual network Layer 2 domain versus routing zone Layer 3 domain rather than routing zone maps to tenant VRF. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.

D:

Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

Question 683

Two applications with separate tenant routing zones accidentally share the default routing table because the new virtual network was attached to the wrong zone. The team proposes: Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context. Which data-center or operational principle BEST justifies that choice?

  1. Tenant control-plane reachability depends on explicitly scoped route membership, not only the existence of a shared EVPN BGP session.
  2. An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration.
  3. Address overlap can be safe when routing contexts and service policy boundaries are independently enforced.
  4. Layer 3 tenant isolation is defined by separate forwarding contexts, not merely distinct VLAN labels.

Explanation

Correct Answer

D:

Two applications with separate tenant routing zones accidentally share the default routing table because the new virtual network was attached to the wrong zone. The central principle is layer 3 tenant isolation is defined by separate forwarding contexts, not merely distinct VLAN labels. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

Incorrect Answers

A:

Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution. For this issue, create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

B:

An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

C:

Address overlap can be safe when routing contexts and service policy boundaries are independently enforced. That concerns overlapping IPv4 addresses across isolated tenants rather than routing zone maps to tenant VRF. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.

Question 684

Two applications with separate tenant routing zones accidentally share the default routing table because the new virtual network was attached to the wrong zone. After applying this change—Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.—which observation BEST demonstrates success?

  1. The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned.
  2. A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable.
  3. Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated.
  4. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.

Explanation

Correct Answer

D:

The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones. That tests the recommended change (Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.) against the original case: Two applications with separate tenant routing zones accidentally share the default routing table because the new virtual network was attached to the wrong zone.

Incorrect Answers

A:

The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned. That concerns connectivity template assignment to generic-system links, while the issue here is routing zone maps to tenant VRF. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

B:

An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. For this issue, create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

C:

Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

Question 685

Two applications with separate tenant routing zones accidentally share the default routing table because the new virtual network was attached to the wrong zone. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Test negative and positive prefix-policy outcomes after every tenant service expansion.
  2. Review stretched-versus-routed network requirements and DCI transport limits during cross-site application changes.
  3. Review route changes and policy enforcement coverage in one tenant change-control workflow.
  4. Audit routing-zone attachment when moving or renaming virtual networks.

Explanation

Correct Answer

D:

A lasting control should detect the original error before release. Audit routing-zone attachment when moving or renaming virtual networks. That is important in this case because an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. The scenario was: Two applications with separate tenant routing zones accidentally share the default routing table because the new virtual network was attached to the wrong zone.

Incorrect Answers

A:

Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

B:

Review stretched-versus-routed network requirements and DCI transport limits during cross-site application changes. That concerns data Center Interconnect scope for extended tenant networks, while the issue here is routing zone maps to tenant VRF. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

C:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. For this issue, create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

Question 686

A data center wants tenant A and tenant B to reuse the same IP prefix but an operator tries to put their interfaces in one shared VRF. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.
  2. Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.
  3. Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution.
  4. External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

Explanation

Correct Answer

A:

The fault is not established by a generic firewall symptom alone. An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

Incorrect Answers

B:

Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. That concerns overlapping IPv4 addresses across isolated tenants, while the issue here is routing zone maps to tenant VRF. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

C:

Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution. However, the present diagnosis decision is grounded in: A data center wants tenant A and tenant B to reuse the same IP prefix but an operator tries to put their interfaces in one shared VRF. For this issue, create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

D:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

Question 687

A data center wants tenant A and tenant B to reuse the same IP prefix but an operator tries to put their interfaces in one shared VRF. Which configuration or operational action MOST directly addresses the problem?

  1. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.
  2. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.
  3. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.
  4. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

Explanation

Correct Answer

A:

This action directly fixes the documented constraint: An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. Apply it to the reported case: A data center wants tenant A and tenant B to reuse the same IP prefix but an operator tries to put their interfaces in one shared VRF. Then verify: The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.

Incorrect Answers

B:

Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

C:

Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service. That concerns intertenant communication via external policy device rather than routing zone maps to tenant VRF. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.

D:

Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

Question 688

A data center wants tenant A and tenant B to reuse the same IP prefix but an operator tries to put their interfaces in one shared VRF. The team proposes: Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context. Which data-center or operational principle BEST justifies that choice?

  1. Layer 3 tenant isolation is defined by separate forwarding contexts, not merely distinct VLAN labels.
  2. An active routing session does not imply that all routes should be exchanged or trusted.
  3. A valid route identifies where packets could travel, not whether the organization should permit that communication.
  4. Multi-fabric reachability is a network service requiring explicit transport and policy, not a property inherited from naming two sites alike.

Explanation

Correct Answer

A:

This principle links classification and policy semantics to the relevant failure. Layer 3 tenant isolation is defined by separate forwarding contexts, not merely distinct VLAN labels. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. The remedy under discussion is: Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

Incorrect Answers

B:

An active routing session does not imply that all routes should be exchanged or trusted. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

C:

A valid route identifies where packets could travel, not whether the organization should permit that communication. That concerns tenant security policy enforcement alongside routing rather than routing zone maps to tenant VRF. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.

D:

Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. For the current principle question, the evidence instead states: A data center wants tenant A and tenant B to reuse the same IP prefix but an operator tries to put their interfaces in one shared VRF. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

Question 689

A data center wants tenant A and tenant B to reuse the same IP prefix but an operator tries to put their interfaces in one shared VRF. After applying this change—Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.—which observation BEST demonstrates success?

  1. Test packets use the intended VNI and host traffic stays within the authorized virtual network despite reused local VLAN IDs.
  2. The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context.
  3. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.
  4. The separate virtual networks preserve their intended broadcast domains while authorized inter-VLAN traffic uses the tenant VRF.

Explanation

Correct Answer

C:

The criterion directly exercises the affected flow or security object: The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones. The original condition was: A data center wants tenant A and tenant B to reuse the same IP prefix but an operator tries to put their interfaces in one shared VRF. The relevant correction is: Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

Incorrect Answers

A:

Test packets use the intended VNI and host traffic stays within the authorized virtual network despite reused local VLAN IDs. That concerns virtual network to VLAN and VNI service mapping, while the issue here is routing zone maps to tenant VRF. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

B:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. For this issue, create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

D:

The separate virtual networks preserve their intended broadcast domains while authorized inter-VLAN traffic uses the tenant VRF. That concerns virtual network Layer 2 domain versus routing zone Layer 3 domain rather than routing zone maps to tenant VRF. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.

Question 690

A data center wants tenant A and tenant B to reuse the same IP prefix but an operator tries to put their interfaces in one shared VRF. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration.
  2. Audit routing-zone attachment when moving or renaming virtual networks.
  3. Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control.
  4. Include connectivity-template assignment checks in endpoint onboarding and movement workflows.

Explanation

Correct Answer

B:

This control reduces recurrence of the same class of failure: An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. Apply the recurring practice: Audit routing-zone attachment when moving or renaming virtual networks. The previous example was: A data center wants tenant A and tenant B to reuse the same IP prefix but an operator tries to put their interfaces in one shared VRF.

Incorrect Answers

A:

An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

C:

Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. For this issue, create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

D:

Include connectivity-template assignment checks in endpoint onboarding and movement workflows. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests