McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 70

Question 690

A data center wants tenant A and tenant B to reuse the same IP prefix but an operator tries to put their interfaces in one shared VRF. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration.
  2. Audit routing-zone attachment when moving or renaming virtual networks.
  3. Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control.
  4. Include connectivity-template assignment checks in endpoint onboarding and movement workflows.

Explanation

Correct Answer

B:

This control reduces recurrence of the same class of failure: An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. Apply the recurring practice: Audit routing-zone attachment when moving or renaming virtual networks. The previous example was: A data center wants tenant A and tenant B to reuse the same IP prefix but an operator tries to put their interfaces in one shared VRF.

Incorrect Answers

A:

An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

C:

Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. For this issue, create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.

D:

Include connectivity-template assignment checks in endpoint onboarding and movement workflows. Here, an Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.

Question 691

Two departments both use 10.40.0.0/24 in different virtual networks, and the design team assumes address overlap makes multitenancy impossible. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.
  2. An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.
  3. External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.
  4. Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

Explanation

Correct Answer

A:

Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant.

Incorrect Answers

B:

An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. That concerns tenant VLAN tagging through connectivity template, while the issue here is overlapping IPv4 addresses across isolated tenants. Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

C:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. For this issue, keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

D:

Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. Here, separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

Question 692

Two departments both use 10.40.0.0/24 in different virtual networks, and the design team assumes address overlap makes multitenancy impossible. Which configuration or operational action MOST directly addresses the problem?

  1. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.
  2. Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.
  3. Create the intended virtual networks for each segment and attach their routed interfaces to the approved routing zone where Layer 3 service is required.
  4. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

Explanation

Correct Answer

B:

Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary. The target behavior is demonstrated when a host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant.

Incorrect Answers

A:

Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. For this issue, keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

C:

Create the intended virtual networks for each segment and attach their routed interfaces to the approved routing zone where Layer 3 service is required. That concerns virtual network Layer 2 domain versus routing zone Layer 3 domain rather than overlapping IPv4 addresses across isolated tenants. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant.

D:

Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. Here, separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

Question 693

Two departments both use 10.40.0.0/24 in different virtual networks, and the design team assumes address overlap makes multitenancy impossible. The team proposes: Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary. Which data-center or operational principle BEST justifies that choice?

  1. Address overlap can be safe when routing contexts and service policy boundaries are independently enforced.
  2. Multi-fabric reachability is a network service requiring explicit transport and policy, not a property inherited from naming two sites alike.
  3. Layer 3 tenant isolation is defined by separate forwarding contexts, not merely distinct VLAN labels.
  4. A valid route identifies where packets could travel, not whether the organization should permit that communication.

Explanation

Correct Answer

A:

Address overlap can be safe when routing contexts and service policy boundaries are independently enforced. It justifies the proposed change (Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.) for the precise reported case: Two departments both use 10.40.0.0/24 in different virtual networks, and the design team assumes address overlap makes multitenancy impossible.

Incorrect Answers

B:

Multi-fabric reachability is a network service requiring explicit transport and policy, not a property inherited from naming two sites alike. Here, separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

C:

Layer 3 tenant isolation is defined by separate forwarding contexts, not merely distinct VLAN labels. That concerns routing zone maps to tenant VRF rather than overlapping IPv4 addresses across isolated tenants. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant.

D:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. Here, separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

Question 694

Two departments both use 10.40.0.0/24 in different virtual networks, and the design team assumes address overlap makes multitenancy impossible. After applying this change—Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.—which observation BEST demonstrates success?

  1. The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move.
  2. The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned.
  3. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant.
  4. Test packets use the intended VNI and host traffic stays within the authorized virtual network despite reused local VLAN IDs.

Explanation

Correct Answer

C:

The configuration is not validated merely by a successful commit. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant. Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

Incorrect Answers

A:

The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move. That concerns VMware inventory integration versus network deployment, while the issue here is overlapping IPv4 addresses across isolated tenants. Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

B:

Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. For this issue, keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

D:

Test packets use the intended VNI and host traffic stays within the authorized virtual network despite reused local VLAN IDs. That concerns virtual network to VLAN and VNI service mapping rather than overlapping IPv4 addresses across isolated tenants. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant.

Question 695

Two departments both use 10.40.0.0/24 in different virtual networks, and the design team assumes address overlap makes multitenancy impossible. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control.
  2. Track border interface, routing-zone and peer parameters together for tenant interconnect changes.
  3. Test negative and positive prefix-policy outcomes after every tenant service expansion.
  4. Require application-owner and security approval for any new route or policy linking routing zones.

Explanation

Correct Answer

A:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control. Address overlap can be safe when routing contexts and service policy boundaries are independently enforced.

Incorrect Answers

B:

Track border interface, routing-zone and peer parameters together for tenant interconnect changes. That concerns routing zone external BGP connection, while the issue here is overlapping IPv4 addresses across isolated tenants. Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

C:

Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. However, the present prevention decision is grounded in: Two departments both use 10.40.0.0/24 in different virtual networks, and the design team assumes address overlap makes multitenancy impossible. For this issue, keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

D:

Require application-owner and security approval for any new route or policy linking routing zones. Here, separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

Question 696

An application migration introduces a second customer with a reused private prefix and an operator merges their routing contexts to simplify inventory. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.
  2. Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.
  3. Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.
  4. Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries.

Explanation

Correct Answer

B:

The decisive cause is separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

Incorrect Answers

A:

An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. Here, separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

C:

Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. However, the present diagnosis decision is grounded in: An application migration introduces a second customer with a reused private prefix and an operator merges their routing contexts to simplify inventory. For this issue, keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

D:

This choice would be assessed for a different data-center fabric or Apstra operational situation: A tenant routes successfully between an application and a database subnet, but a design assumes that network reachability alone satisfies the required security restriction. Its decisive constraint is separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

Question 697

An application migration introduces a second customer with a reused private prefix and an operator merges their routing contexts to simplify inventory. Which configuration or operational action MOST directly addresses the problem?

  1. Inspect virtual network and VNI definitions with connectivity template assignments and correct any mismatched tenant service mappings.
  2. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.
  3. Validate VMware-to-virtual network mapping and the connected host uplinks, then apply the supported Apstra connectivity configuration for the intended workload.
  4. Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

Explanation

Correct Answer

D:

In this case, separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant.

Incorrect Answers

A:

Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. For this issue, keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

B:

Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes. Here, separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

C:

Validate VMware-to-virtual network mapping and the connected host uplinks, then apply the supported Apstra connectivity configuration for the intended workload. That concerns VMware inventory integration versus network deployment rather than overlapping IPv4 addresses across isolated tenants. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant.

Question 698

An application migration introduces a second customer with a reused private prefix and an operator merges their routing contexts to simplify inventory. The team proposes: Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary. Which data-center or operational principle BEST justifies that choice?

  1. Multitenancy preserves isolation by default and treats exceptions as explicit security and routing decisions.
  2. An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration.
  3. An active routing session does not imply that all routes should be exchanged or trusted.
  4. Address overlap can be safe when routing contexts and service policy boundaries are independently enforced.

Explanation

Correct Answer

D:

An application migration introduces a second customer with a reused private prefix and an operator merges their routing contexts to simplify inventory. The central principle is address overlap can be safe when routing contexts and service policy boundaries are independently enforced. Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

Incorrect Answers

A:

Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. For this issue, keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

B:

An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration. Here, separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

C:

An active routing session does not imply that all routes should be exchanged or trusted. That concerns routing policy control for tenant route exchange rather than overlapping IPv4 addresses across isolated tenants. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant.

Question 699

An application migration introduces a second customer with a reused private prefix and an operator merges their routing contexts to simplify inventory. After applying this change—Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.—which observation BEST demonstrates success?

  1. The intended remote routed prefixes appear only in their authorized VRF tables, and an unrelated tenant cannot import them.
  2. The separate virtual networks preserve their intended broadcast domains while authorized inter-VLAN traffic uses the tenant VRF.
  3. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant.
  4. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.

Explanation

Correct Answer

C:

A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant. That tests the recommended change (Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.) against the original case: An application migration introduces a second customer with a reused private prefix and an operator merges their routing contexts to simplify inventory.

Incorrect Answers

A:

The intended remote routed prefixes appear only in their authorized VRF tables, and an unrelated tenant cannot import them. That concerns VRF route target mismatch across overlay tenants, while the issue here is overlapping IPv4 addresses across isolated tenants. Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

B:

Apstra virtual networks model tenant Layer 2 connectivity while routing zones provide the associated Layer 3/VRF tenancy context. However, the present verification decision is grounded in: An application migration introduces a second customer with a reused private prefix and an operator merges their routing contexts to simplify inventory. For this issue, keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

D:

The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones. That concerns routing zone maps to tenant VRF rather than overlapping IPv4 addresses across isolated tenants. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant. Specifically for the verification question, the case to validate is: An application migration introduces a second customer with a reused private prefix and an operator merges their routing contexts to simplify inventory.

Question 700

An application migration introduces a second customer with a reused private prefix and an operator merges their routing contexts to simplify inventory. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Recheck virtualization inventory and network attachment mappings during cluster onboarding or maintenance.
  2. Maintain a tenant VNI allocation register and validate mapping when expanding virtual networks across racks.
  3. Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control.
  4. Review stretched-versus-routed network requirements and DCI transport limits during cross-site application changes.

Explanation

Correct Answer

C:

A lasting control should detect the original error before release. Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control. That is important in this case because separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. The scenario was: An application migration introduces a second customer with a reused private prefix and an operator merges their routing contexts to simplify inventory.

Incorrect Answers

A:

Compute or VMware inventory visibility and the actual fabric connectivity/template association are separate parts of data center service delivery. Here, separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

B:

Maintain a tenant VNI allocation register and validate mapping when expanding virtual networks across racks. That concerns virtual network to VLAN and VNI service mapping, while the issue here is overlapping IPv4 addresses across isolated tenants. Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

D:

Review stretched-versus-routed network requirements and DCI transport limits during cross-site application changes. Here, separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests