McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 72

Question 710

A tenant has several distinct application VLANs within one VRF, but the operator incorrectly creates an additional VRF for every bridge segment. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Audit routing-zone attachment when moving or renaming virtual networks.
  2. Review stretched-versus-routed network requirements and DCI transport limits during cross-site application changes.
  3. Review virtual network membership and routing-zone context as separate parameters for each tenant service.
  4. Test negative and positive prefix-policy outcomes after every tenant service expansion.

Explanation

Correct Answer

C:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Review virtual network membership and routing-zone context as separate parameters for each tenant service. A Layer 2 network and an isolated Layer 3 routing domain are related design objects with different purposes.

Incorrect Answers

A:

An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. Here, apstra virtual networks model tenant Layer 2 connectivity while routing zones provide the associated Layer 3/VRF tenancy context.

B:

Review stretched-versus-routed network requirements and DCI transport limits during cross-site application changes. That concerns data Center Interconnect scope for extended tenant networks, while the issue here is virtual network Layer 2 domain versus routing zone Layer 3 domain. Create the intended virtual networks for each segment and attach their routed interfaces to the approved routing zone where Layer 3 service is required.

D:

Test negative and positive prefix-policy outcomes after every tenant service expansion. Here, apstra virtual networks model tenant Layer 2 connectivity while routing zones provide the associated Layer 3/VRF tenancy context.

Question 711

A server needs untagged access to one tenant virtual network, but the template sends a tagged VLAN that the host NIC never recognizes. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution.
  2. An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.
  3. An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.
  4. Apstra virtual networks model tenant Layer 2 connectivity while routing zones provide the associated Layer 3/VRF tenancy context.

Explanation

Correct Answer

C:

The decisive cause is an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

Incorrect Answers

A:

Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.

B:

An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. That concerns routing zone maps to tenant VRF, while the issue here is tenant VLAN tagging through connectivity template. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

D:

Apstra virtual networks model tenant Layer 2 connectivity while routing zones provide the associated Layer 3/VRF tenancy context. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.

Question 712

A server needs untagged access to one tenant virtual network, but the template sends a tagged VLAN that the host NIC never recognizes. Which configuration or operational action MOST directly addresses the problem?

  1. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.
  2. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.
  3. Map actual traffic paths to the intended inspection point and configure least-privilege policies for allowed tenant applications and denied alternatives.
  4. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

Explanation

Correct Answer

D:

In this case, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration. A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable.

Incorrect Answers

A:

Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. For this issue, select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

B:

Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.

C:

Map actual traffic paths to the intended inspection point and configure least-privilege policies for allowed tenant applications and denied alternatives. That concerns tenant security policy enforcement alongside routing rather than tenant VLAN tagging through connectivity template. A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable.

Question 713

A server needs untagged access to one tenant virtual network, but the template sends a tagged VLAN that the host NIC never recognizes. The team proposes: Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration. Which data-center or operational principle BEST justifies that choice?

  1. Correct tenant membership requires consistent tagging semantics at both ends of a physical attachment.
  2. Address overlap can be safe when routing contexts and service policy boundaries are independently enforced.
  3. An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration.
  4. Network intent must be explicitly associated with the attachment that carries the endpoint traffic.

Explanation

Correct Answer

A:

A server needs untagged access to one tenant virtual network, but the template sends a tagged VLAN that the host NIC never recognizes. The central principle is correct tenant membership requires consistent tagging semantics at both ends of a physical attachment. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

Incorrect Answers

B:

Address overlap can be safe when routing contexts and service policy boundaries are independently enforced. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.

C:

An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration. That concerns routing zone external BGP connection rather than tenant VLAN tagging through connectivity template. A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable.

D:

Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.

Question 714

A server needs untagged access to one tenant virtual network, but the template sends a tagged VLAN that the host NIC never recognizes. After applying this change—Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.—which observation BEST demonstrates success?

  1. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.
  2. Test packets use the intended VNI and host traffic stays within the authorized virtual network despite reused local VLAN IDs.
  3. A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable.
  4. The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move.

Explanation

Correct Answer

C:

A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable. That tests the recommended change (Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.) against the original case: A server needs untagged access to one tenant virtual network, but the template sends a tagged VLAN that the host NIC never recognizes.

Incorrect Answers

A:

The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones. That concerns routing zone maps to tenant VRF, while the issue here is tenant VLAN tagging through connectivity template. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration. Specifically for the verification question, the case to validate is: A server needs untagged access to one tenant virtual network, but the template sends a tagged VLAN that the host NIC never recognizes.

B:

Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. For this issue, select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

D:

The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move. That concerns VMware inventory integration versus network deployment rather than tenant VLAN tagging through connectivity template. A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable.

Question 715

A server needs untagged access to one tenant virtual network, but the template sends a tagged VLAN that the host NIC never recognizes. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Review route changes and policy enforcement coverage in one tenant change-control workflow.
  2. Review stretched-versus-routed network requirements and DCI transport limits during cross-site application changes.
  3. Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration.
  4. Review virtual network membership and routing-zone context as separate parameters for each tenant service.

Explanation

Correct Answer

C:

A lasting control should detect the original error before release. Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration. That is important in this case because an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. The scenario was: A server needs untagged access to one tenant virtual network, but the template sends a tagged VLAN that the host NIC never recognizes.

Incorrect Answers

A:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.

B:

Review stretched-versus-routed network requirements and DCI transport limits during cross-site application changes. That concerns data Center Interconnect scope for extended tenant networks, while the issue here is tenant VLAN tagging through connectivity template. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

D:

Review virtual network membership and routing-zone context as separate parameters for each tenant service. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. Specifically for the prevention question, the case to validate is: A server needs untagged access to one tenant virtual network, but the template sends a tagged VLAN that the host NIC never recognizes.

Question 716

A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.
  2. Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.
  3. External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.
  4. Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution.

Explanation

Correct Answer

A:

The fault is not established by a generic firewall symptom alone. An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

Incorrect Answers

B:

Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. That concerns overlapping IPv4 addresses across isolated tenants, while the issue here is tenant VLAN tagging through connectivity template. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

C:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. For this issue, select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

D:

This choice would be assessed for a different data-center fabric or Apstra operational situation: An engineer copies a route-target configuration from a different tenant and unintentionally exposes remote IP prefixes to the wrong routing zone. Its decisive constraint is an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.

Question 717

A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection. Which configuration or operational action MOST directly addresses the problem?

  1. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.
  2. Validate VMware-to-virtual network mapping and the connected host uplinks, then apply the supported Apstra connectivity configuration for the intended workload.
  3. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.
  4. Inspect virtual network and VNI definitions with connectivity template assignments and correct any mismatched tenant service mappings.

Explanation

Correct Answer

C:

This action directly fixes the documented constraint: An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. Apply it to the reported case: A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection. Then verify: A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable.

Incorrect Answers

A:

An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. For this issue, select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

B:

Validate VMware-to-virtual network mapping and the connected host uplinks, then apply the supported Apstra connectivity configuration for the intended workload. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.

D:

Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.

Question 718

A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection. The team proposes: Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration. Which data-center or operational principle BEST justifies that choice?

  1. A valid route identifies where packets could travel, not whether the organization should permit that communication.
  2. A Layer 2 network and an isolated Layer 3 routing domain are related design objects with different purposes.
  3. Correct tenant membership requires consistent tagging semantics at both ends of a physical attachment.
  4. Local VLAN numbers are not a sufficient global tenant identifier in an EVPN-VXLAN fabric.

Explanation

Correct Answer

C:

This principle links classification and policy semantics to the relevant failure. Correct tenant membership requires consistent tagging semantics at both ends of a physical attachment. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. The remedy under discussion is: Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

Incorrect Answers

A:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. For this issue, select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

B:

A Layer 2 network and an isolated Layer 3 routing domain are related design objects with different purposes. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.

D:

Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. For the current principle question, the evidence instead states: A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.

Question 719

A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection. After applying this change—Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.—which observation BEST demonstrates success?

  1. Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated.
  2. A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable.
  3. The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported.
  4. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant.

Explanation

Correct Answer

B:

The criterion directly exercises the affected flow or security object: A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable. The original condition was: A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection. The relevant correction is: Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

Incorrect Answers

A:

Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated. That concerns intertenant communication via external policy device, while the issue here is tenant VLAN tagging through connectivity template. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

C:

The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.

D:

A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant. That concerns overlapping IPv4 addresses across isolated tenants rather than tenant VLAN tagging through connectivity template. A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable.

Question 720

A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration.
  2. Track border interface, routing-zone and peer parameters together for tenant interconnect changes.
  3. Maintain a tenant VNI allocation register and validate mapping when expanding virtual networks across racks.
  4. Recheck virtualization inventory and network attachment mappings during cluster onboarding or maintenance.

Explanation

Correct Answer

A:

This control reduces recurrence of the same class of failure: An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. Apply the recurring practice: Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration. The previous example was: A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection.

Incorrect Answers

B:

Track border interface, routing-zone and peer parameters together for tenant interconnect changes. That concerns routing zone external BGP connection, while the issue here is tenant VLAN tagging through connectivity template. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

C:

Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. However, the present prevention decision is grounded in: A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection. For this issue, select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

D:

Recheck virtualization inventory and network attachment mappings during cluster onboarding or maintenance. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. Specifically for the prevention question, the case to validate is: A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests