McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 74

Question 730

A rack contains correctly discovered storage links and an approved tenant VLAN, yet its attachment template was created but never applied to the intended links. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include connectivity-template assignment checks in endpoint onboarding and movement workflows.
  2. Review route changes and policy enforcement coverage in one tenant change-control workflow.
  3. Audit routing-zone attachment when moving or renaming virtual networks.
  4. Track border interface, routing-zone and peer parameters together for tenant interconnect changes.

Explanation

Correct Answer

A:

A lasting control should detect the original error before release. Include connectivity-template assignment checks in endpoint onboarding and movement workflows. That is important in this case because creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. The scenario was: A rack contains correctly discovered storage links and an approved tenant VLAN, yet its attachment template was created but never applied to the intended links.

Incorrect Answers

B:

Review route changes and policy enforcement coverage in one tenant change-control workflow. That concerns tenant security policy enforcement alongside routing, while the issue here is connectivity template assignment to generic-system links. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

C:

An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. However, the present prevention decision is grounded in: A rack contains correctly discovered storage links and an approved tenant VLAN, yet its attachment template was created but never applied to the intended links. For this issue, apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

D:

Track border interface, routing-zone and peer parameters together for tenant interconnect changes. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

Question 731

A tenant VRF needs to reach a firewall outside the fabric, but its leaf interface to the external router is configured only as a Layer 2 access port. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service.
  2. Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.
  3. Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.
  4. External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

Explanation

Correct Answer

D:

The fault is not established by a generic firewall symptom alone. External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

Incorrect Answers

A:

Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

B:

Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. That concerns data Center Interconnect scope for extended tenant networks, while the issue here is routing zone external BGP connection. Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

C:

Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. For this issue, use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

Question 732

A tenant VRF needs to reach a firewall outside the fabric, but its leaf interface to the external router is configured only as a Layer 2 access port. Which configuration or operational action MOST directly addresses the problem?

  1. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.
  2. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.
  3. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.
  4. Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

Explanation

Correct Answer

D:

This action directly fixes the documented constraint: External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. Apply it to the reported case: A tenant VRF needs to reach a firewall outside the fabric, but its leaf interface to the external router is configured only as a Layer 2 access port. Then verify: The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context.

Incorrect Answers

A:

An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. For this issue, use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

B:

Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

C:

Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service. That concerns intertenant communication via external policy device rather than routing zone external BGP connection. The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context.

Question 733

A tenant VRF needs to reach a firewall outside the fabric, but its leaf interface to the external router is configured only as a Layer 2 access port. The team proposes: Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency. Which data-center or operational principle BEST justifies that choice?

  1. Address overlap can be safe when routing contexts and service policy boundaries are independently enforced.
  2. A valid route identifies where packets could travel, not whether the organization should permit that communication.
  3. An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration.
  4. Network intent must be explicitly associated with the attachment that carries the endpoint traffic.

Explanation

Correct Answer

C:

This principle links classification and policy semantics to the relevant failure. An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. The remedy under discussion is: Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

Incorrect Answers

A:

Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. For this issue, use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

B:

A valid route identifies where packets could travel, not whether the organization should permit that communication. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

D:

Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

Question 734

A tenant VRF needs to reach a firewall outside the fabric, but its leaf interface to the external router is configured only as a Layer 2 access port. After applying this change—Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.—which observation BEST demonstrates success?

  1. The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move.
  2. The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context.
  3. Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior.
  4. The intended remote routed prefixes appear only in their authorized VRF tables, and an unrelated tenant cannot import them.

Explanation

Correct Answer

B:

The criterion directly exercises the affected flow or security object: The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context. The original condition was: A tenant VRF needs to reach a firewall outside the fabric, but its leaf interface to the external router is configured only as a Layer 2 access port. The relevant correction is: Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

Incorrect Answers

A:

The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move. That concerns VMware inventory integration versus network deployment, while the issue here is routing zone external BGP connection. Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

C:

Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

D:

The intended remote routed prefixes appear only in their authorized VRF tables, and an unrelated tenant cannot import them. That concerns VRF route target mismatch across overlay tenants rather than routing zone external BGP connection. The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context.

Question 735

A tenant VRF needs to reach a firewall outside the fabric, but its leaf interface to the external router is configured only as a Layer 2 access port. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Require application-owner and security approval for any new route or policy linking routing zones.
  2. Track border interface, routing-zone and peer parameters together for tenant interconnect changes.
  3. Test negative and positive prefix-policy outcomes after every tenant service expansion.
  4. Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration.

Explanation

Correct Answer

B:

This control reduces recurrence of the same class of failure: External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. Apply the recurring practice: Track border interface, routing-zone and peer parameters together for tenant interconnect changes. The previous example was: A tenant VRF needs to reach a firewall outside the fabric, but its leaf interface to the external router is configured only as a Layer 2 access port.

Incorrect Answers

A:

Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

C:

Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. However, the present prevention decision is grounded in: A tenant VRF needs to reach a firewall outside the fabric, but its leaf interface to the external router is configured only as a Layer 2 access port. For this issue, use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

D:

Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. Specifically for the prevention question, the case to validate is: A tenant VRF needs to reach a firewall outside the fabric, but its leaf interface to the external router is configured only as a Layer 2 access port.

Question 736

A tenant's external BGP neighbor never forms because the required routed interface and routing-policy connectivity template were not applied at the border leaf. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.
  2. Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.
  3. Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries.
  4. Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.

Explanation

Correct Answer

A:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context.

Incorrect Answers

B:

Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. That concerns connectivity template assignment to generic-system links, while the issue here is routing zone external BGP connection. Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

C:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. For this issue, use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

D:

Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

Question 737

A tenant's external BGP neighbor never forms because the required routed interface and routing-policy connectivity template were not applied at the border leaf. Which configuration or operational action MOST directly addresses the problem?

  1. Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.
  2. Validate VMware-to-virtual network mapping and the connected host uplinks, then apply the supported Apstra connectivity configuration for the intended workload.
  3. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.
  4. Correct the approved export/import route target association in the affected tenant VRFs while testing isolation from other routing zones.

Explanation

Correct Answer

A:

Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency. The target behavior is demonstrated when the intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context.

Incorrect Answers

B:

Validate VMware-to-virtual network mapping and the connected host uplinks, then apply the supported Apstra connectivity configuration for the intended workload. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

C:

Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites. That concerns data Center Interconnect scope for extended tenant networks rather than routing zone external BGP connection. The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context.

D:

Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

Question 738

A tenant's external BGP neighbor never forms because the required routed interface and routing-policy connectivity template were not applied at the border leaf. The team proposes: Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency. Which data-center or operational principle BEST justifies that choice?

  1. Multitenancy preserves isolation by default and treats exceptions as explicit security and routing decisions.
  2. An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration.
  3. An active routing session does not imply that all routes should be exchanged or trusted.
  4. Correct tenant membership requires consistent tagging semantics at both ends of a physical attachment.

Explanation

Correct Answer

B:

An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration. It justifies the proposed change (Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.) for the precise reported case: A tenant's external BGP neighbor never forms because the required routed interface and routing-policy connectivity template were not applied at the border leaf.

Incorrect Answers

A:

Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. For this issue, use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

C:

An active routing session does not imply that all routes should be exchanged or trusted. That concerns routing policy control for tenant route exchange rather than routing zone external BGP connection. The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context.

D:

An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

Question 739

A tenant's external BGP neighbor never forms because the required routed interface and routing-policy connectivity template were not applied at the border leaf. After applying this change—Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.—which observation BEST demonstrates success?

  1. The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context.
  2. The separate virtual networks preserve their intended broadcast domains while authorized inter-VLAN traffic uses the tenant VRF.
  3. A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant.
  4. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.

Explanation

Correct Answer

A:

The configuration is not validated merely by a successful commit. The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context. External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

Incorrect Answers

B:

Apstra virtual networks model tenant Layer 2 connectivity while routing zones provide the associated Layer 3/VRF tenancy context. For this issue, use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

C:

A host in either tenant reaches only its own allowed destinations despite sharing the same numeric subnet as the other tenant. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. Specifically for the verification question, the case to validate is: A tenant's external BGP neighbor never forms because the required routed interface and routing-policy connectivity template were not applied at the border leaf.

D:

The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones. That concerns routing zone maps to tenant VRF rather than routing zone external BGP connection. The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context.

Question 740

A tenant's external BGP neighbor never forms because the required routed interface and routing-policy connectivity template were not applied at the border leaf. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Review route changes and policy enforcement coverage in one tenant change-control workflow.
  2. Recheck virtualization inventory and network attachment mappings during cluster onboarding or maintenance.
  3. Include routing zone identity and route targets in tenant VRF change reviews.
  4. Track border interface, routing-zone and peer parameters together for tenant interconnect changes.

Explanation

Correct Answer

D:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Track border interface, routing-zone and peer parameters together for tenant interconnect changes. An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration.

Incorrect Answers

A:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

B:

Recheck virtualization inventory and network attachment mappings during cluster onboarding or maintenance. That concerns VMware inventory integration versus network deployment, while the issue here is routing zone external BGP connection. Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

C:

Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution. For this issue, use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests