McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 75

Question 740

A tenant's external BGP neighbor never forms because the required routed interface and routing-policy connectivity template were not applied at the border leaf. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Review route changes and policy enforcement coverage in one tenant change-control workflow.
  2. Recheck virtualization inventory and network attachment mappings during cluster onboarding or maintenance.
  3. Include routing zone identity and route targets in tenant VRF change reviews.
  4. Track border interface, routing-zone and peer parameters together for tenant interconnect changes.

Explanation

Correct Answer

D:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Track border interface, routing-zone and peer parameters together for tenant interconnect changes. An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration.

Incorrect Answers

A:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. Here, external routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.

B:

Recheck virtualization inventory and network attachment mappings during cluster onboarding or maintenance. That concerns VMware inventory integration versus network deployment, while the issue here is routing zone external BGP connection. Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

C:

Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution. For this issue, use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

Question 741

Two tenant VRFs are isolated, but a business request needs narrowly authorized communication and the operator adds an unrestricted internal route leak. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.
  2. External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.
  3. Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.
  4. Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution.

Explanation

Correct Answer

C:

The decisive cause is tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

Incorrect Answers

A:

Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

B:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. That concerns routing zone external BGP connection, while the issue here is intertenant communication via external policy device. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

D:

Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

Question 742

Two tenant VRFs are isolated, but a business request needs narrowly authorized communication and the operator adds an unrestricted internal route leak. Which configuration or operational action MOST directly addresses the problem?

  1. Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.
  2. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.
  3. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.
  4. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

Explanation

Correct Answer

B:

In this case, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service. Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated.

Incorrect Answers

A:

Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. For this issue, design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

C:

Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context. That concerns routing zone maps to tenant VRF rather than intertenant communication via external policy device. Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated.

D:

Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

Question 743

Two tenant VRFs are isolated, but a business request needs narrowly authorized communication and the operator adds an unrestricted internal route leak. The team proposes: Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service. Which data-center or operational principle BEST justifies that choice?

  1. Local VLAN numbers are not a sufficient global tenant identifier in an EVPN-VXLAN fabric.
  2. Observing an endpoint in an inventory integration is not proof that its physical and overlay network path is correctly provisioned.
  3. Network intent must be explicitly associated with the attachment that carries the endpoint traffic.
  4. Multitenancy preserves isolation by default and treats exceptions as explicit security and routing decisions.

Explanation

Correct Answer

D:

Two tenant VRFs are isolated, but a business request needs narrowly authorized communication and the operator adds an unrestricted internal route leak. The central principle is multitenancy preserves isolation by default and treats exceptions as explicit security and routing decisions. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

Incorrect Answers

A:

Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. For this issue, design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

B:

Observing an endpoint in an inventory integration is not proof that its physical and overlay network path is correctly provisioned. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

C:

Network intent must be explicitly associated with the attachment that carries the endpoint traffic. That concerns connectivity template assignment to generic-system links rather than intertenant communication via external policy device. Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated.

Question 744

Two tenant VRFs are isolated, but a business request needs narrowly authorized communication and the operator adds an unrestricted internal route leak. After applying this change—Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.—which observation BEST demonstrates success?

  1. A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable.
  2. The intended tenant routing zone learns or advertises only the approved external prefixes and the BGP session establishes in the correct context.
  3. The approved application succeeds while unauthorized cross-segment or cross-tenant probes are blocked and logged as designed.
  4. Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated.

Explanation

Correct Answer

D:

Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated. That tests the recommended change (Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.) against the original case: Two tenant VRFs are isolated, but a business request needs narrowly authorized communication and the operator adds an unrestricted internal route leak.

Incorrect Answers

A:

A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable. That concerns tenant VLAN tagging through connectivity template, while the issue here is intertenant communication via external policy device. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

B:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. For this issue, design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

C:

The approved application succeeds while unauthorized cross-segment or cross-tenant probes are blocked and logged as designed. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

Question 745

Two tenant VRFs are isolated, but a business request needs narrowly authorized communication and the operator adds an unrestricted internal route leak. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control.
  2. Test negative and positive prefix-policy outcomes after every tenant service expansion.
  3. Require application-owner and security approval for any new route or policy linking routing zones.
  4. Include routing zone identity and route targets in tenant VRF change reviews.

Explanation

Correct Answer

C:

A lasting control should detect the original error before release. Require application-owner and security approval for any new route or policy linking routing zones. That is important in this case because tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. The scenario was: Two tenant VRFs are isolated, but a business request needs narrowly authorized communication and the operator adds an unrestricted internal route leak.

Incorrect Answers

A:

Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

B:

Test negative and positive prefix-policy outcomes after every tenant service expansion. That concerns routing policy control for tenant route exchange, while the issue here is intertenant communication via external policy device. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

D:

Include routing zone identity and route targets in tenant VRF change reviews. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. Specifically for the prevention question, the case to validate is: Two tenant VRFs are isolated, but a business request needs narrowly authorized communication and the operator adds an unrestricted internal route leak.

Question 746

A security requirement calls for traffic between finance and engineering to traverse an inspected firewall, yet the fabric team tries to merge the routing zones directly. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.
  2. Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.
  3. Compute or VMware inventory visibility and the actual fabric connectivity/template association are separate parts of data center service delivery.
  4. Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service.

Explanation

Correct Answer

B:

The fault is not established by a generic firewall symptom alone. Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

Incorrect Answers

A:

Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

C:

Compute or VMware inventory visibility and the actual fabric connectivity/template association are separate parts of data center service delivery. For this issue, design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

D:

Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

Question 747

A security requirement calls for traffic between finance and engineering to traverse an inspected firewall, yet the fabric team tries to merge the routing zones directly. Which configuration or operational action MOST directly addresses the problem?

  1. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.
  2. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.
  3. Map actual traffic paths to the intended inspection point and configure least-privilege policies for allowed tenant applications and denied alternatives.
  4. Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.

Explanation

Correct Answer

B:

This action directly fixes the documented constraint: Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. Apply it to the reported case: A security requirement calls for traffic between finance and engineering to traverse an inspected firewall, yet the fabric team tries to merge the routing zones directly. Then verify: Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated.

Incorrect Answers

A:

An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. For this issue, design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

C:

Map actual traffic paths to the intended inspection point and configure least-privilege policies for allowed tenant applications and denied alternatives. That concerns tenant security policy enforcement alongside routing rather than intertenant communication via external policy device. Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated.

D:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

Question 748

A security requirement calls for traffic between finance and engineering to traverse an inspected firewall, yet the fabric team tries to merge the routing zones directly. The team proposes: Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service. Which data-center or operational principle BEST justifies that choice?

  1. Multitenancy preserves isolation by default and treats exceptions as explicit security and routing decisions.
  2. Address overlap can be safe when routing contexts and service policy boundaries are independently enforced.
  3. Tenant control-plane reachability depends on explicitly scoped route membership, not only the existence of a shared EVPN BGP session.
  4. An active routing session does not imply that all routes should be exchanged or trusted.

Explanation

Correct Answer

A:

This principle links classification and policy semantics to the relevant failure. Multitenancy preserves isolation by default and treats exceptions as explicit security and routing decisions. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. The remedy under discussion is: Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

Incorrect Answers

B:

Address overlap can be safe when routing contexts and service policy boundaries are independently enforced. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

C:

Tenant control-plane reachability depends on explicitly scoped route membership, not only the existence of a shared EVPN BGP session. That concerns VRF route target mismatch across overlay tenants rather than intertenant communication via external policy device. Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated.

D:

Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. For the current principle question, the evidence instead states: A security requirement calls for traffic between finance and engineering to traverse an inspected firewall, yet the fabric team tries to merge the routing zones directly. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

Question 749

A security requirement calls for traffic between finance and engineering to traverse an inspected firewall, yet the fabric team tries to merge the routing zones directly. After applying this change—Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.—which observation BEST demonstrates success?

  1. The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move.
  2. Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated.
  3. The separate virtual networks preserve their intended broadcast domains while authorized inter-VLAN traffic uses the tenant VRF.
  4. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.

Explanation

Correct Answer

B:

The criterion directly exercises the affected flow or security object: Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated. The original condition was: A security requirement calls for traffic between finance and engineering to traverse an inspected firewall, yet the fabric team tries to merge the routing zones directly. The relevant correction is: Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

Incorrect Answers

A:

The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move. That concerns VMware inventory integration versus network deployment, while the issue here is intertenant communication via external policy device. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

C:

The separate virtual networks preserve their intended broadcast domains while authorized inter-VLAN traffic uses the tenant VRF. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

D:

The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones. That concerns routing zone maps to tenant VRF rather than intertenant communication via external policy device. Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated.

Question 750

A security requirement calls for traffic between finance and engineering to traverse an inspected firewall, yet the fabric team tries to merge the routing zones directly. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Require application-owner and security approval for any new route or policy linking routing zones.
  2. Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration.
  3. Review route changes and policy enforcement coverage in one tenant change-control workflow.
  4. Include connectivity-template assignment checks in endpoint onboarding and movement workflows.

Explanation

Correct Answer

A:

This control reduces recurrence of the same class of failure: Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. Apply the recurring practice: Require application-owner and security approval for any new route or policy linking routing zones. The previous example was: A security requirement calls for traffic between finance and engineering to traverse an inspected firewall, yet the fabric team tries to merge the routing zones directly.

Incorrect Answers

B:

Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration. That concerns tenant VLAN tagging through connectivity template, while the issue here is intertenant communication via external policy device. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

C:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. For this issue, design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

D:

Include connectivity-template assignment checks in endpoint onboarding and movement workflows. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests