McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 73

Question 720

A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration.
  2. Track border interface, routing-zone and peer parameters together for tenant interconnect changes.
  3. Maintain a tenant VNI allocation register and validate mapping when expanding virtual networks across racks.
  4. Recheck virtualization inventory and network attachment mappings during cluster onboarding or maintenance.

Explanation

Correct Answer

A:

This control reduces recurrence of the same class of failure: An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. Apply the recurring practice: Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration. The previous example was: A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection.

Incorrect Answers

B:

Track border interface, routing-zone and peer parameters together for tenant interconnect changes. That concerns routing zone external BGP connection, while the issue here is tenant VLAN tagging through connectivity template. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

C:

Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. However, the present prevention decision is grounded in: A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection. For this issue, select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.

D:

Recheck virtualization inventory and network attachment mappings during cluster onboarding or maintenance. Here, an Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. Specifically for the prevention question, the case to validate is: A hypervisor trunk is planned to carry two tagged virtual networks, yet the leaf attachment is configured as a single untagged access connection.

Question 721

An Apstra virtual network exists but a new server remains isolated because no connectivity template assigns its leaf-connected generic-system interface to that service. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution.
  2. Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.
  3. Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.
  4. Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

Explanation

Correct Answer

D:

Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned.

Incorrect Answers

A:

Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

B:

Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. That concerns overlapping IPv4 addresses across isolated tenants, while the issue here is connectivity template assignment to generic-system links. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

C:

Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. For this issue, apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

Question 722

An Apstra virtual network exists but a new server remains isolated because no connectivity template assigns its leaf-connected generic-system interface to that service. Which configuration or operational action MOST directly addresses the problem?

  1. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.
  2. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.
  3. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.
  4. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

Explanation

Correct Answer

A:

Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes. The target behavior is demonstrated when the designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned.

Incorrect Answers

B:

Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

C:

Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration. That concerns tenant VLAN tagging through connectivity template rather than connectivity template assignment to generic-system links. The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned.

D:

Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

Question 723

An Apstra virtual network exists but a new server remains isolated because no connectivity template assigns its leaf-connected generic-system interface to that service. The team proposes: Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes. Which data-center or operational principle BEST justifies that choice?

  1. Network intent must be explicitly associated with the attachment that carries the endpoint traffic.
  2. An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration.
  3. A Layer 2 network and an isolated Layer 3 routing domain are related design objects with different purposes.
  4. Observing an endpoint in an inventory integration is not proof that its physical and overlay network path is correctly provisioned.

Explanation

Correct Answer

A:

Network intent must be explicitly associated with the attachment that carries the endpoint traffic. It justifies the proposed change (Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.) for the precise reported case: An Apstra virtual network exists but a new server remains isolated because no connectivity template assigns its leaf-connected generic-system interface to that service.

Incorrect Answers

B:

An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

C:

A Layer 2 network and an isolated Layer 3 routing domain are related design objects with different purposes. That concerns virtual network Layer 2 domain versus routing zone Layer 3 domain rather than connectivity template assignment to generic-system links. The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned.

D:

Compute or VMware inventory visibility and the actual fabric connectivity/template association are separate parts of data center service delivery. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

Question 724

An Apstra virtual network exists but a new server remains isolated because no connectivity template assigns its leaf-connected generic-system interface to that service. After applying this change—Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.—which observation BEST demonstrates success?

  1. The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned.
  2. Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior.
  3. The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones.
  4. The approved application succeeds while unauthorized cross-segment or cross-tenant probes are blocked and logged as designed.

Explanation

Correct Answer

A:

The configuration is not validated merely by a successful commit. The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned. Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

Incorrect Answers

B:

Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. However, the present verification decision is grounded in: An Apstra virtual network exists but a new server remains isolated because no connectivity template assigns its leaf-connected generic-system interface to that service. For this issue, apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

C:

The tenant routes appear only in their authorized VRFs and identical subnet values do not collide between independent zones. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

D:

The approved application succeeds while unauthorized cross-segment or cross-tenant probes are blocked and logged as designed. That concerns tenant security policy enforcement alongside routing rather than connectivity template assignment to generic-system links. The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned.

Question 725

An Apstra virtual network exists but a new server remains isolated because no connectivity template assigns its leaf-connected generic-system interface to that service. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Test negative and positive prefix-policy outcomes after every tenant service expansion.
  2. Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control.
  3. Include connectivity-template assignment checks in endpoint onboarding and movement workflows.
  4. Require application-owner and security approval for any new route or policy linking routing zones.

Explanation

Correct Answer

C:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Include connectivity-template assignment checks in endpoint onboarding and movement workflows. Network intent must be explicitly associated with the attachment that carries the endpoint traffic.

Incorrect Answers

A:

The alternative applies to another Juniper security situation: A tenant's external BGP session is established but the remote system receives no service prefixes because the export routing policy excludes the new subnet. That situation concerns routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. Its key condition is creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

B:

Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control. That concerns overlapping IPv4 addresses across isolated tenants, while the issue here is connectivity template assignment to generic-system links. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes. Specifically for the prevention question, the case to validate is: An Apstra virtual network exists but a new server remains isolated because no connectivity template assigns its leaf-connected generic-system interface to that service.

D:

Require application-owner and security approval for any new route or policy linking routing zones. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. Specifically for the prevention question, the case to validate is: An Apstra virtual network exists but a new server remains isolated because no connectivity template assigns its leaf-connected generic-system interface to that service.

Question 726

A rack contains correctly discovered storage links and an approved tenant VLAN, yet its attachment template was created but never applied to the intended links. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Apstra virtual networks model tenant Layer 2 connectivity while routing zones provide the associated Layer 3/VRF tenancy context.
  2. External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.
  3. Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.
  4. Compute or VMware inventory visibility and the actual fabric connectivity/template association are separate parts of data center service delivery.

Explanation

Correct Answer

C:

The decisive cause is creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

Incorrect Answers

A:

Apstra virtual networks model tenant Layer 2 connectivity while routing zones provide the associated Layer 3/VRF tenancy context. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

B:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. That concerns routing zone external BGP connection, while the issue here is connectivity template assignment to generic-system links. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

D:

This choice would be assessed for a different data-center fabric or Apstra operational situation: Apstra imports a VMware virtual machine inventory, and an operator assumes its existence automatically attaches the VM to the correct VXLAN tenant network. Its decisive constraint is creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

Question 727

A rack contains correctly discovered storage links and an approved tenant VLAN, yet its attachment template was created but never applied to the intended links. Which configuration or operational action MOST directly addresses the problem?

  1. Create or select the intended routing zone and associate each tenant virtual network and its Layer 3 interface with the correct VRF context.
  2. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.
  3. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.
  4. Map actual traffic paths to the intended inspection point and configure least-privilege policies for allowed tenant applications and denied alternatives.

Explanation

Correct Answer

C:

In this case, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes. The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned.

Incorrect Answers

A:

An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. For this issue, apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

B:

Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

D:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

Question 728

A rack contains correctly discovered storage links and an approved tenant VLAN, yet its attachment template was created but never applied to the intended links. The team proposes: Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes. Which data-center or operational principle BEST justifies that choice?

  1. An active routing session does not imply that all routes should be exchanged or trusted.
  2. Network intent must be explicitly associated with the attachment that carries the endpoint traffic.
  3. Address overlap can be safe when routing contexts and service policy boundaries are independently enforced.
  4. Multitenancy preserves isolation by default and treats exceptions as explicit security and routing decisions.

Explanation

Correct Answer

B:

A rack contains correctly discovered storage links and an approved tenant VLAN, yet its attachment template was created but never applied to the intended links. The central principle is network intent must be explicitly associated with the attachment that carries the endpoint traffic. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

Incorrect Answers

A:

Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. For this issue, apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

C:

Address overlap can be safe when routing contexts and service policy boundaries are independently enforced. That concerns overlapping IPv4 addresses across isolated tenants rather than connectivity template assignment to generic-system links. The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned.

D:

Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

Question 729

A rack contains correctly discovered storage links and an approved tenant VLAN, yet its attachment template was created but never applied to the intended links. After applying this change—Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.—which observation BEST demonstrates success?

  1. Test packets use the intended VNI and host traffic stays within the authorized virtual network despite reused local VLAN IDs.
  2. A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable.
  3. The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned.
  4. The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move.

Explanation

Correct Answer

C:

The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned. That tests the recommended change (Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.) against the original case: A rack contains correctly discovered storage links and an approved tenant VLAN, yet its attachment template was created but never applied to the intended links.

Incorrect Answers

A:

Test packets use the intended VNI and host traffic stays within the authorized virtual network despite reused local VLAN IDs. That concerns virtual network to VLAN and VNI service mapping, while the issue here is connectivity template assignment to generic-system links. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

B:

An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. For this issue, apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

D:

The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move. That concerns VMware inventory integration versus network deployment rather than connectivity template assignment to generic-system links. The designated physical host port is configured for the intended tenant service and an unrelated host remains unassigned.

Question 730

A rack contains correctly discovered storage links and an approved tenant VLAN, yet its attachment template was created but never applied to the intended links. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Include connectivity-template assignment checks in endpoint onboarding and movement workflows.
  2. Review route changes and policy enforcement coverage in one tenant change-control workflow.
  3. Audit routing-zone attachment when moving or renaming virtual networks.
  4. Track border interface, routing-zone and peer parameters together for tenant interconnect changes.

Explanation

Correct Answer

A:

A lasting control should detect the original error before release. Include connectivity-template assignment checks in endpoint onboarding and movement workflows. That is important in this case because creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. The scenario was: A rack contains correctly discovered storage links and an approved tenant VLAN, yet its attachment template was created but never applied to the intended links.

Incorrect Answers

B:

Review route changes and policy enforcement coverage in one tenant change-control workflow. That concerns tenant security policy enforcement alongside routing, while the issue here is connectivity template assignment to generic-system links. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

C:

An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. However, the present prevention decision is grounded in: A rack contains correctly discovered storage links and an approved tenant VLAN, yet its attachment template was created but never applied to the intended links. For this issue, apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.

D:

Track border interface, routing-zone and peer parameters together for tenant interconnect changes. Here, creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests