McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 76

Question 750

A security requirement calls for traffic between finance and engineering to traverse an inspected firewall, yet the fabric team tries to merge the routing zones directly. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Require application-owner and security approval for any new route or policy linking routing zones.
  2. Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration.
  3. Review route changes and policy enforcement coverage in one tenant change-control workflow.
  4. Include connectivity-template assignment checks in endpoint onboarding and movement workflows.

Explanation

Correct Answer

A:

This control reduces recurrence of the same class of failure: Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. Apply the recurring practice: Require application-owner and security approval for any new route or policy linking routing zones. The previous example was: A security requirement calls for traffic between finance and engineering to traverse an inspected firewall, yet the fabric team tries to merge the routing zones directly.

Incorrect Answers

B:

Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration. That concerns tenant VLAN tagging through connectivity template, while the issue here is intertenant communication via external policy device. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

C:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. For this issue, design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.

D:

Include connectivity-template assignment checks in endpoint onboarding and movement workflows. Here, tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.

Question 751

A tenant's external BGP session is established but the remote system receives no service prefixes because the export routing policy excludes the new subnet. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.
  2. An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.
  3. Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.
  4. Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution.

Explanation

Correct Answer

C:

Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported.

Incorrect Answers

A:

Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

B:

An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. That concerns routing zone maps to tenant VRF, while the issue here is routing policy control for tenant route exchange. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

D:

Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

Question 752

A tenant's external BGP session is established but the remote system receives no service prefixes because the export routing policy excludes the new subnet. Which configuration or operational action MOST directly addresses the problem?

  1. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.
  2. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.
  3. Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes.
  4. Create the intended virtual networks for each segment and attach their routed interfaces to the approved routing zone where Layer 3 service is required.

Explanation

Correct Answer

A:

Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements. The target behavior is demonstrated when the intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported.

Incorrect Answers

B:

Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

C:

Apply the reviewed connectivity template to the correct generic-system attachment, validate staging and commit its network changes. That concerns connectivity template assignment to generic-system links rather than routing policy control for tenant route exchange. The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported.

D:

Apstra virtual networks model tenant Layer 2 connectivity while routing zones provide the associated Layer 3/VRF tenancy context. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

Question 753

A tenant's external BGP session is established but the remote system receives no service prefixes because the export routing policy excludes the new subnet. The team proposes: Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements. Which data-center or operational principle BEST justifies that choice?

  1. An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration.
  2. An active routing session does not imply that all routes should be exchanged or trusted.
  3. Address overlap can be safe when routing contexts and service policy boundaries are independently enforced.
  4. Local VLAN numbers are not a sufficient global tenant identifier in an EVPN-VXLAN fabric.

Explanation

Correct Answer

B:

An active routing session does not imply that all routes should be exchanged or trusted. It justifies the proposed change (Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.) for the precise reported case: A tenant's external BGP session is established but the remote system receives no service prefixes because the export routing policy excludes the new subnet.

Incorrect Answers

A:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. For this issue, review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

C:

Address overlap can be safe when routing contexts and service policy boundaries are independently enforced. That concerns overlapping IPv4 addresses across isolated tenants rather than routing policy control for tenant route exchange. The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported.

D:

Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

Question 754

A tenant's external BGP session is established but the remote system receives no service prefixes because the export routing policy excludes the new subnet. After applying this change—Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.—which observation BEST demonstrates success?

  1. The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported.
  2. The intended remote routed prefixes appear only in their authorized VRF tables, and an unrelated tenant cannot import them.
  3. Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated.
  4. The approved application succeeds while unauthorized cross-segment or cross-tenant probes are blocked and logged as designed.

Explanation

Correct Answer

A:

The configuration is not validated merely by a successful commit. The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported. Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

Incorrect Answers

B:

Overlay tenant route import requires route-target membership aligned with the intended VRF and EVPN service distribution. For this issue, review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

C:

Authorized intertenant test traffic traverses the intended inspection boundary while unrelated prefixes stay isolated. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

D:

The approved application succeeds while unauthorized cross-segment or cross-tenant probes are blocked and logged as designed. That concerns tenant security policy enforcement alongside routing rather than routing policy control for tenant route exchange. The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported.

Question 755

A tenant's external BGP session is established but the remote system receives no service prefixes because the export routing policy excludes the new subnet. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Audit routing-zone attachment when moving or renaming virtual networks.
  2. Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration.
  3. Include connectivity-template assignment checks in endpoint onboarding and movement workflows.
  4. Test negative and positive prefix-policy outcomes after every tenant service expansion.

Explanation

Correct Answer

D:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Test negative and positive prefix-policy outcomes after every tenant service expansion. An active routing session does not imply that all routes should be exchanged or trusted.

Incorrect Answers

A:

An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

B:

Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration. That concerns tenant VLAN tagging through connectivity template, while the issue here is routing policy control for tenant route exchange. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

C:

Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. For this issue, review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

Question 756

A new partner connection begins advertising all tenant routes instead of its approved subset because a broad import/export policy was selected. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated.
  2. Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service.
  3. External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration.
  4. Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

Explanation

Correct Answer

D:

The decisive cause is routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

Incorrect Answers

A:

Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

B:

Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. That concerns virtual network to VLAN and VNI service mapping, while the issue here is routing policy control for tenant route exchange. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

C:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. However, the present diagnosis decision is grounded in: A new partner connection begins advertising all tenant routes instead of its approved subset because a broad import/export policy was selected. For this issue, review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

Question 757

A new partner connection begins advertising all tenant routes instead of its approved subset because a broad import/export policy was selected. Which configuration or operational action MOST directly addresses the problem?

  1. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.
  2. Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service.
  3. Correct the approved export/import route target association in the affected tenant VRFs while testing isolation from other routing zones.
  4. Map actual traffic paths to the intended inspection point and configure least-privilege policies for allowed tenant applications and denied alternatives.

Explanation

Correct Answer

A:

In this case, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements. The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported.

Incorrect Answers

B:

Design the supported external system path with explicit routing policies and firewall controls for only the approved source, destination and service. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

C:

Correct the approved export/import route target association in the affected tenant VRFs while testing isolation from other routing zones. That concerns VRF route target mismatch across overlay tenants rather than routing policy control for tenant route exchange. The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported.

D:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

Question 758

A new partner connection begins advertising all tenant routes instead of its approved subset because a broad import/export policy was selected. The team proposes: Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements. Which data-center or operational principle BEST justifies that choice?

  1. Layer 3 tenant isolation is defined by separate forwarding contexts, not merely distinct VLAN labels.
  2. Network intent must be explicitly associated with the attachment that carries the endpoint traffic.
  3. Correct tenant membership requires consistent tagging semantics at both ends of a physical attachment.
  4. An active routing session does not imply that all routes should be exchanged or trusted.

Explanation

Correct Answer

D:

A new partner connection begins advertising all tenant routes instead of its approved subset because a broad import/export policy was selected. The central principle is an active routing session does not imply that all routes should be exchanged or trusted. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

Incorrect Answers

A:

An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. For this issue, review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

B:

Network intent must be explicitly associated with the attachment that carries the endpoint traffic. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

C:

Correct tenant membership requires consistent tagging semantics at both ends of a physical attachment. That concerns tenant VLAN tagging through connectivity template rather than routing policy control for tenant route exchange. The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported.

Question 759

A new partner connection begins advertising all tenant routes instead of its approved subset because a broad import/export policy was selected. After applying this change—Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.—which observation BEST demonstrates success?

  1. The separate virtual networks preserve their intended broadcast domains while authorized inter-VLAN traffic uses the tenant VRF.
  2. The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported.
  3. The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move.
  4. Test packets use the intended VNI and host traffic stays within the authorized virtual network despite reused local VLAN IDs.

Explanation

Correct Answer

B:

The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported. That tests the recommended change (Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.) against the original case: A new partner connection begins advertising all tenant routes instead of its approved subset because a broad import/export policy was selected.

Incorrect Answers

A:

The separate virtual networks preserve their intended broadcast domains while authorized inter-VLAN traffic uses the tenant VRF. That concerns virtual network Layer 2 domain versus routing zone Layer 3 domain, while the issue here is routing policy control for tenant route exchange. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

C:

The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

D:

Test packets use the intended VNI and host traffic stays within the authorized virtual network despite reused local VLAN IDs. That concerns virtual network to VLAN and VNI service mapping rather than routing policy control for tenant route exchange. The intended external prefix is learned in the correct VRF and a deliberate unauthorized prefix is not imported or exported.

Question 760

A new partner connection begins advertising all tenant routes instead of its approved subset because a broad import/export policy was selected. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Review route changes and policy enforcement coverage in one tenant change-control workflow.
  2. Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control.
  3. Require application-owner and security approval for any new route or policy linking routing zones.
  4. Test negative and positive prefix-policy outcomes after every tenant service expansion.

Explanation

Correct Answer

D:

A lasting control should detect the original error before release. Test negative and positive prefix-policy outcomes after every tenant service expansion. That is important in this case because routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. The scenario was: A new partner connection begins advertising all tenant routes instead of its approved subset because a broad import/export policy was selected.

Incorrect Answers

A:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. For the current prevention question, the evidence instead states: A new partner connection begins advertising all tenant routes instead of its approved subset because a broad import/export policy was selected. Here, routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.

B:

Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control. That concerns overlapping IPv4 addresses across isolated tenants, while the issue here is routing policy control for tenant route exchange. Review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

C:

Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. For this issue, review peer address-family and tenant VRF routing policies, then permit only approved import/export prefixes and verify advertisements.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests