McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 78

Question 770

A new virtual network is created with a VNI inconsistent with its tenant service record, causing one leaf to encapsulate traffic into the wrong overlay segment. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Review route changes and policy enforcement coverage in one tenant change-control workflow.
  2. Maintain a tenant VNI allocation register and validate mapping when expanding virtual networks across racks.
  3. Verify server-facing tagging requirements whenever a host changes operating system or virtualization configuration.
  4. Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control.

Explanation

Correct Answer

B:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Maintain a tenant VNI allocation register and validate mapping when expanding virtual networks across racks. Local VLAN numbers are not a sufficient global tenant identifier in an EVPN-VXLAN fabric.

Incorrect Answers

A:

Routing-zone connectivity and security policy authorization are distinct requirements when business traffic crosses controlled service boundaries. Here, apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service.

C:

An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. However, the present prevention decision is grounded in: A new virtual network is created with a VNI inconsistent with its tenant service record, causing one leaf to encapsulate traffic into the wrong overlay segment. For this issue, inspect virtual network and VNI definitions with connectivity template assignments and correct any mismatched tenant service mappings.

D:

Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control. Here, apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service.

Question 771

A project wants to extend a tenant segment to another data center but assumes that simply adding both locations to a common display group creates a working DCI transport. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing.
  2. An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior.
  3. An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation.
  4. Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

Explanation

Correct Answer

D:

The decisive cause is multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

Incorrect Answers

A:

Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

B:

An Apstra connectivity template can represent intended Layer 2 endpoint attachment and its tagged or untagged VLAN behavior. That concerns tenant VLAN tagging through connectivity template, while the issue here is data Center Interconnect scope for extended tenant networks. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

C:

An Apstra routing zone represents Layer 3 tenancy and maps associated networks into a distinct VRF routing domain for isolation. For this issue, define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

Question 772

A project wants to extend a tenant segment to another data center but assumes that simply adding both locations to a common display group creates a working DCI transport. Which configuration or operational action MOST directly addresses the problem?

  1. Use an authorized connectivity template for the border-leaf external connection, configure peer addressing and policy, and verify the tenant VRF adjacency.
  2. Map actual traffic paths to the intended inspection point and configure least-privilege policies for allowed tenant applications and denied alternatives.
  3. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.
  4. Keep overlapping tenant networks in their intended separate routing zones/VRFs and validate any approved external interconnection boundary.

Explanation

Correct Answer

C:

In this case, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites. Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior.

Incorrect Answers

A:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. For this issue, define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

B:

Map actual traffic paths to the intended inspection point and configure least-privilege policies for allowed tenant applications and denied alternatives. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

D:

Separate tenant VRFs can each hold identical IP prefixes because route lookup and policy context remain isolated. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

Question 773

A project wants to extend a tenant segment to another data center but assumes that simply adding both locations to a common display group creates a working DCI transport. The team proposes: Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites. Which data-center or operational principle BEST justifies that choice?

  1. Observing an endpoint in an inventory integration is not proof that its physical and overlay network path is correctly provisioned.
  2. An active routing session does not imply that all routes should be exchanged or trusted.
  3. Multi-fabric reachability is a network service requiring explicit transport and policy, not a property inherited from naming two sites alike.
  4. Network intent must be explicitly associated with the attachment that carries the endpoint traffic.

Explanation

Correct Answer

C:

A project wants to extend a tenant segment to another data center but assumes that simply adding both locations to a common display group creates a working DCI transport. The central principle is multi-fabric reachability is a network service requiring explicit transport and policy, not a property inherited from naming two sites alike. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

Incorrect Answers

A:

Compute or VMware inventory visibility and the actual fabric connectivity/template association are separate parts of data center service delivery. For this issue, define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

B:

An active routing session does not imply that all routes should be exchanged or trusted. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

D:

Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

Question 774

A project wants to extend a tenant segment to another data center but assumes that simply adding both locations to a common display group creates a working DCI transport. After applying this change—Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.—which observation BEST demonstrates success?

  1. Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior.
  2. The separate virtual networks preserve their intended broadcast domains while authorized inter-VLAN traffic uses the tenant VRF.
  3. A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable.
  4. Test packets use the intended VNI and host traffic stays within the authorized virtual network despite reused local VLAN IDs.

Explanation

Correct Answer

A:

Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior. That tests the recommended change (Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.) against the original case: A project wants to extend a tenant segment to another data center but assumes that simply adding both locations to a common display group creates a working DCI transport.

Incorrect Answers

B:

Apstra virtual networks model tenant Layer 2 connectivity while routing zones provide the associated Layer 3/VRF tenancy context. For this issue, define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

C:

A packet capture on the endpoint and leaf shows the expected tag behavior, and only the authorized virtual networks are reachable. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

D:

Test packets use the intended VNI and host traffic stays within the authorized virtual network despite reused local VLAN IDs. That concerns virtual network to VLAN and VNI service mapping rather than data Center Interconnect scope for extended tenant networks. Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior.

Question 775

A project wants to extend a tenant segment to another data center but assumes that simply adding both locations to a common display group creates a working DCI transport. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Track border interface, routing-zone and peer parameters together for tenant interconnect changes.
  2. Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control.
  3. Require application-owner and security approval for any new route or policy linking routing zones.
  4. Review stretched-versus-routed network requirements and DCI transport limits during cross-site application changes.

Explanation

Correct Answer

D:

A lasting control should detect the original error before release. Review stretched-versus-routed network requirements and DCI transport limits during cross-site application changes. That is important in this case because multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. The scenario was: A project wants to extend a tenant segment to another data center but assumes that simply adding both locations to a common display group creates a working DCI transport.

Incorrect Answers

A:

External routing connectivity to a tenant routing zone depends on a correctly modeled Layer 3 interface and supported routing protocol or static route configuration. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

B:

Document tenant-scoped addressing and avoid using global subnet uniqueness as the only isolation control. That concerns overlapping IPv4 addresses across isolated tenants, while the issue here is data Center Interconnect scope for extended tenant networks. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

C:

Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. For this issue, define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

Question 776

A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised.
  2. Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.
  3. Compute or VMware inventory visibility and the actual fabric connectivity/template association are separate parts of data center service delivery.
  4. Creating a tenant network and creating a connectivity template are separate from assigning the template to the intended connected interfaces.

Explanation

Correct Answer

B:

The fault is not established by a generic firewall symptom alone. Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

Incorrect Answers

A:

Routing protocol adjacency and route-policy filtering are separate controls for which tenant prefixes are accepted or advertised. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

C:

Compute or VMware inventory visibility and the actual fabric connectivity/template association are separate parts of data center service delivery. However, the present diagnosis decision is grounded in: A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design. For this issue, define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

D:

This choice would be assessed for a different data-center fabric or Apstra operational situation: An Apstra virtual network exists but a new server remains isolated because no connectivity template assigns its leaf-connected generic-system interface to that service. Its decisive constraint is multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

Question 777

A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design. Which configuration or operational action MOST directly addresses the problem?

  1. Create the intended virtual networks for each segment and attach their routed interfaces to the approved routing zone where Layer 3 service is required.
  2. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.
  3. Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration.
  4. Inspect virtual network and VNI definitions with connectivity template assignments and correct any mismatched tenant service mappings.

Explanation

Correct Answer

B:

This action directly fixes the documented constraint: Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. Apply it to the reported case: A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design. Then verify: Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior.

Incorrect Answers

A:

Apstra virtual networks model tenant Layer 2 connectivity while routing zones provide the associated Layer 3/VRF tenancy context. However, the present correction decision is grounded in: A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design. For this issue, define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

C:

Select the supported access or tagged connection primitive for the generic system and verify the host-side VLAN or trunk configuration. That concerns tenant VLAN tagging through connectivity template rather than data Center Interconnect scope for extended tenant networks. Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior.

D:

Apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

Question 778

A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design. The team proposes: Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites. Which data-center or operational principle BEST justifies that choice?

  1. Multi-fabric reachability is a network service requiring explicit transport and policy, not a property inherited from naming two sites alike.
  2. Address overlap can be safe when routing contexts and service policy boundaries are independently enforced.
  3. An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration.
  4. Multitenancy preserves isolation by default and treats exceptions as explicit security and routing decisions.

Explanation

Correct Answer

A:

This principle links classification and policy semantics to the relevant failure. Multi-fabric reachability is a network service requiring explicit transport and policy, not a property inherited from naming two sites alike. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. The remedy under discussion is: Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

Incorrect Answers

B:

Address overlap can be safe when routing contexts and service policy boundaries are independently enforced. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

C:

An external physical link cannot provide the required tenant route exchange without explicit L3 and routing-policy configuration. That concerns routing zone external BGP connection rather than data Center Interconnect scope for extended tenant networks. Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior.

D:

Tenant routing-zone isolation is an intentional boundary; intertenant reachability may require an approved external routing/security service rather than indiscriminate VRF route sharing. For the current principle question, the evidence instead states: A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

Question 779

A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design. After applying this change—Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.—which observation BEST demonstrates success?

  1. The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move.
  2. Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior.
  3. The approved application succeeds while unauthorized cross-segment or cross-tenant probes are blocked and logged as designed.
  4. The intended remote routed prefixes appear only in their authorized VRF tables, and an unrelated tenant cannot import them.

Explanation

Correct Answer

B:

The criterion directly exercises the affected flow or security object: Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior. The original condition was: A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design. The relevant correction is: Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

Incorrect Answers

A:

The VM attaches to the expected network and retains the authorized routing and security treatment after a controlled host move. That concerns VMware inventory integration versus network deployment, while the issue here is data Center Interconnect scope for extended tenant networks. Define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

C:

The approved application succeeds while unauthorized cross-segment or cross-tenant probes are blocked and logged as designed. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

D:

The intended remote routed prefixes appear only in their authorized VRF tables, and an unrelated tenant cannot import them. That concerns VRF route target mismatch across overlay tenants rather than data Center Interconnect scope for extended tenant networks. Only the intended tenant networks communicate across sites and a simulated site outage follows the documented isolation and recovery behavior.

Question 780

A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Maintain a tenant VNI allocation register and validate mapping when expanding virtual networks across racks.
  2. Review stretched-versus-routed network requirements and DCI transport limits during cross-site application changes.
  3. Review virtual network membership and routing-zone context as separate parameters for each tenant service.
  4. Include connectivity-template assignment checks in endpoint onboarding and movement workflows.

Explanation

Correct Answer

B:

This control reduces recurrence of the same class of failure: Multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. Apply the recurring practice: Review stretched-versus-routed network requirements and DCI transport limits during cross-site application changes. The previous example was: A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design.

Incorrect Answers

A:

The alternative applies to another Juniper security situation: Two tenants both use VLAN 210 locally on different racks, but their Apstra virtual networks are accidentally connected to one shared VNI that violates isolation. That situation concerns apstra virtual network intent must map the correct attachment VLAN and EVPN/VXLAN identity to the intended isolated tenant service. Its key condition is multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries.

C:

Apstra virtual networks model tenant Layer 2 connectivity while routing zones provide the associated Layer 3/VRF tenancy context. However, the present prevention decision is grounded in: A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design. For this issue, define supported DCI architecture and tenant prefix or VN extension scope, then verify WAN transport and policy constraints between blueprints or sites.

D:

Include connectivity-template assignment checks in endpoint onboarding and movement workflows. Here, multi-site tenant services require explicit DCI connectivity and a justified choice of routed or bridged reachability with separate failure and security boundaries. Specifically for the prevention question, the case to validate is: A cross-site application requires IP routing between two fabrics, yet engineers plan an unrestricted Layer 2 bridge for every tenant VLAN without a controlled DCI design.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests