McAfee Secure

Exam Code: JN0-481

Exam Name: Data Center, Specialist (JNCIS-DC)

Certification Provider: Juniper

Juniper JN0-481 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

65 Questions & Answers with Testing Engine

"Data Center, Specialist (JNCIS-DC) Exam", also known as JN0-481 exam, is a Juniper certification exam.

Pass your tests with the always up-to-date JN0-481 Exam Engine. Your JN0-481 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Juniper JN0-481 Practice Test 90

Question 890

A spine upgrade may affect multiple leaf racks and VRFs, yet a team cannot explain the intended blast radius without traversing the Apstra topology model. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Run dependency queries before fabric maintenance and record their scope in the change ticket.
  2. Maintain a reviewed inventory of probe scopes, required telemetry sources and intended thresholds.
  3. Alert on counter trends separately from binary interface state and review optics during hardware changes.
  4. Include intent-graph dependency checks in service-impact assessments for rack changes.

Explanation

Correct Answer

A:

The preventive practice is aligned with the diagnosed mechanism, not an unrelated protection. Run dependency queries before fabric maintenance and record their scope in the change ticket. Risk assessment improves when physical fault domains are traced to logical services rather than inferred from naming conventions.

Incorrect Answers

B:

Maintain a reviewed inventory of probe scopes, required telemetry sources and intended thresholds. That concerns intent-Based Analytics probe definition, while the issue here is graph query for physical-to-virtual impact. Query the affected device's adjacent links and downstream virtual-network relationships, then verify the returned dependencies against current blueprint state.

C:

Interface error and discard telemetry can reveal degraded forwarding even while physical link state remains up. However, the present prevention decision is grounded in: A spine upgrade may affect multiple leaf racks and VRFs, yet a team cannot explain the intended blast radius without traversing the Apstra topology model. For this issue, query the affected device's adjacent links and downstream virtual-network relationships, then verify the returned dependencies against current blueprint state.

D:

Include intent-graph dependency checks in service-impact assessments for rack changes. Here, a relationship query can connect physical devices and links to dependent logical systems and services in the Apstra intent graph.

Question 891

A network engineer fixes a congested spine uplink and closes the incident based on a successful configuration commit without confirming that the analytics anomaly disappeared. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Apstra Graph Explorer exposes modeled objects and relationships that can help trace which physical and virtual resources support a network service.
  2. A relationship query can connect physical devices and links to dependent logical systems and services in the Apstra intent graph.
  3. A valid analytics conclusion depends on receiving timely samples from the selected device and monitoring pipeline, not simply on an existing probe definition.
  4. Remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.

Explanation

Correct Answer

D:

The decisive cause is remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone. Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

Incorrect Answers

A:

Apstra Graph Explorer exposes modeled objects and relationships that can help trace which physical and virtual resources support a network service. Here, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.

B:

A relationship query can connect physical devices and links to dependent logical systems and services in the Apstra intent graph. That concerns graph query for physical-to-virtual impact, while the issue here is verifying remediation against IBA evidence. Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

C:

A valid analytics conclusion depends on receiving timely samples from the selected device and monitoring pipeline, not simply on an existing probe definition. For this issue, rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

Question 892

A network engineer fixes a congested spine uplink and closes the incident based on a successful configuration commit without confirming that the analytics anomaly disappeared. Which configuration or operational action MOST directly addresses the problem?

  1. Build a supported graph query with the intended object types and relationship filters, then inspect a small known sample before using the results.
  2. Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.
  3. Compare historical and current probe measurements with approved workload windows, then tune the narrow supported threshold and test negative cases.
  4. Inspect affected interface probes, device counters and optical or queue context, then isolate the actual transport or congestion condition.

Explanation

Correct Answer

B:

In this case, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone. Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test. Current probe measurements return to the accepted range and the previously impacted tenant flow passes its functional acceptance check.

Incorrect Answers

A:

Graph queries can select modeled Apstra resources and relationships using defined query constraints rather than enumerating every element by hand. For this issue, rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

C:

Compare historical and current probe measurements with approved workload windows, then tune the narrow supported threshold and test negative cases. That concerns baseline-aware anomaly threshold selection rather than verifying remediation against IBA evidence. Current probe measurements return to the accepted range and the previously impacted tenant flow passes its functional acceptance check.

D:

Interface error and discard telemetry can reveal degraded forwarding even while physical link state remains up. Here, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.

Question 893

A network engineer fixes a congested spine uplink and closes the incident based on a successful configuration commit without confirming that the analytics anomaly disappeared. The team proposes: Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test. Which data-center or operational principle BEST justifies that choice?

  1. Risk assessment improves when physical fault domains are traced to logical services rather than inferred from naming conventions.
  2. A change is operationally successful only when the original measured symptom and dependent service impact are resolved.
  3. The absence of an anomaly is not proof of service health when measurement coverage is unavailable.
  4. Link availability and forwarding quality are separate measurable properties of an IP fabric.

Explanation

Correct Answer

B:

A network engineer fixes a congested spine uplink and closes the incident based on a successful configuration commit without confirming that the analytics anomaly disappeared. The central principle is a change is operationally successful only when the original measured symptom and dependent service impact are resolved. Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

Incorrect Answers

A:

A relationship query can connect physical devices and links to dependent logical systems and services in the Apstra intent graph. For this issue, rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

C:

The absence of an anomaly is not proof of service health when measurement coverage is unavailable. That concerns probe telemetry freshness and missing samples rather than verifying remediation against IBA evidence. Current probe measurements return to the accepted range and the previously impacted tenant flow passes its functional acceptance check.

D:

Interface error and discard telemetry can reveal degraded forwarding even while physical link state remains up. For the current principle question, the evidence instead states: A network engineer fixes a congested spine uplink and closes the incident based on a successful configuration commit without confirming that the analytics anomaly disappeared. Here, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.

Question 894

A network engineer fixes a congested spine uplink and closes the incident based on a successful configuration commit without confirming that the analytics anomaly disappeared. After applying this change—Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.—which observation BEST demonstrates success?

  1. Normal expected peaks no longer create repetitive false alarms while a controlled abnormal condition still produces the intended alert.
  2. Current probe measurements return to the accepted range and the previously impacted tenant flow passes its functional acceptance check.
  3. The investigation identifies the relevant leaf and dependent service objects, supported by their actual observed conditions.
  4. Returned objects match the approved rack or routing-zone scope and the query excludes a deliberate out-of-scope control object.

Explanation

Correct Answer

B:

Current probe measurements return to the accepted range and the previously impacted tenant flow passes its functional acceptance check. That tests the recommended change (Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.) against the original case: A network engineer fixes a congested spine uplink and closes the incident based on a successful configuration commit without confirming that the analytics anomaly disappeared.

Incorrect Answers

A:

Normal expected peaks no longer create repetitive false alarms while a controlled abnormal condition still produces the intended alert. That concerns baseline-aware anomaly threshold selection, while the issue here is verifying remediation against IBA evidence. Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

C:

The investigation identifies the relevant leaf and dependent service objects, supported by their actual observed conditions. Here, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.

D:

Returned objects match the approved rack or routing-zone scope and the query excludes a deliberate out-of-scope control object. That concerns graph query selecting precise object scope rather than verifying remediation against IBA evidence. Current probe measurements return to the accepted range and the previously impacted tenant flow passes its functional acceptance check.

Question 895

A network engineer fixes a congested spine uplink and closes the incident based on a successful configuration commit without confirming that the analytics anomaly disappeared. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Monitor sample freshness and missing-telemetry conditions as first-class analytics health signals.
  2. Document which IBA probes support each service SLO and where monitoring coverage has gaps.
  3. Pair every analytics-triggered incident with recorded before-and-after probe and service evidence.
  4. Review graph-query filters and labels when the underlying object model or tenant inventory changes.

Explanation

Correct Answer

C:

A lasting control should detect the original error before release. Pair every analytics-triggered incident with recorded before-and-after probe and service evidence. That is important in this case because remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone. The scenario was: A network engineer fixes a congested spine uplink and closes the incident based on a successful configuration commit without confirming that the analytics anomaly disappeared.

Incorrect Answers

A:

A valid analytics conclusion depends on receiving timely samples from the selected device and monitoring pipeline, not simply on an existing probe definition. Here, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.

B:

Document which IBA probes support each service SLO and where monitoring coverage has gaps. That concerns IBA probe anomaly versus affected service, while the issue here is verifying remediation against IBA evidence. Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

D:

Review graph-query filters and labels when the underlying object model or tenant inventory changes. Here, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.

Question 896

An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again. Which explanation BEST identifies the Juniper data-center or Apstra mechanism causing this result?

  1. Remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.
  2. A valid analytics conclusion depends on receiving timely samples from the selected device and monitoring pipeline, not simply on an existing probe definition.
  3. A relationship query can connect physical devices and links to dependent logical systems and services in the Apstra intent graph.
  4. An Apstra IBA probe defines a supported analytical measurement or condition over selected network resources and requires appropriate source data.

Explanation

Correct Answer

A:

The fault is not established by a generic firewall symptom alone. Remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone. Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

Incorrect Answers

B:

A valid analytics conclusion depends on receiving timely samples from the selected device and monitoring pipeline, not simply on an existing probe definition. That concerns probe telemetry freshness and missing samples, while the issue here is verifying remediation against IBA evidence. Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

C:

A relationship query can connect physical devices and links to dependent logical systems and services in the Apstra intent graph. However, the present diagnosis decision is grounded in: An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again. For this issue, rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

D:

An Apstra IBA probe defines a supported analytical measurement or condition over selected network resources and requires appropriate source data. Here, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.

Question 897

An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again. Which configuration or operational action MOST directly addresses the problem?

  1. Use the supported graph view to traverse the affected virtual network, devices, links and dependencies before isolating the fault.
  2. Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.
  3. Build a supported graph query with the intended object types and relationship filters, then inspect a small known sample before using the results.
  4. Compare historical and current probe measurements with approved workload windows, then tune the narrow supported threshold and test negative cases.

Explanation

Correct Answer

B:

This action directly fixes the documented constraint: Remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone. Apply it to the reported case: An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again. Then verify: Current probe measurements return to the accepted range and the previously impacted tenant flow passes its functional acceptance check.

Incorrect Answers

A:

Apstra Graph Explorer exposes modeled objects and relationships that can help trace which physical and virtual resources support a network service. For this issue, rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

C:

Build a supported graph query with the intended object types and relationship filters, then inspect a small known sample before using the results. That concerns graph query selecting precise object scope rather than verifying remediation against IBA evidence. Current probe measurements return to the accepted range and the previously impacted tenant flow passes its functional acceptance check. Specifically for the correction question, the case to validate is: An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again.

D:

Anomaly alerting requires thresholds or reference baselines that reflect expected workload variation and supported probe semantics. Here, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.

Question 898

An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again. The team proposes: Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test. Which data-center or operational principle BEST justifies that choice?

  1. A change is operationally successful only when the original measured symptom and dependent service impact are resolved.
  2. A single analytics alert is evidence to investigate, not a complete substitute for verifying user-facing connectivity.
  3. The absence of an anomaly is not proof of service health when measurement coverage is unavailable.
  4. Collecting raw telemetry and evaluating a specific network intent condition are distinct monitoring steps.

Explanation

Correct Answer

A:

This principle links classification and policy semantics to the relevant failure. A change is operationally successful only when the original measured symptom and dependent service impact are resolved. Here, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone. The remedy under discussion is: Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

Incorrect Answers

B:

A single analytics alert is evidence to investigate, not a complete substitute for verifying user-facing connectivity. Here, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.

C:

The absence of an anomaly is not proof of service health when measurement coverage is unavailable. That concerns probe telemetry freshness and missing samples rather than verifying remediation against IBA evidence. Current probe measurements return to the accepted range and the previously impacted tenant flow passes its functional acceptance check. Specifically for the principle question, the case to validate is: An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again.

D:

The alternative applies to another Juniper security situation: A spine interface intermittently drops packets, but an operator creates only a generic fabric service view and never configures a probe to measure the relevant operational metric. That situation concerns an Apstra IBA probe defines a supported analytical measurement or condition over selected network resources and requires appropriate source data. Its key condition is remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.

Question 899

An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again. After applying this change—Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.—which observation BEST demonstrates success?

  1. Current probe measurements return to the accepted range and the previously impacted tenant flow passes its functional acceptance check.
  2. Returned objects match the approved rack or routing-zone scope and the query excludes a deliberate out-of-scope control object.
  3. The change plan lists the correct impacted racks and tenant services while excluding a control tenant that does not depend on the device.
  4. The investigation identifies the relevant leaf and dependent service objects, supported by their actual observed conditions.

Explanation

Correct Answer

A:

The criterion directly exercises the affected flow or security object: Current probe measurements return to the accepted range and the previously impacted tenant flow passes its functional acceptance check. The original condition was: An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again. The relevant correction is: Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

Incorrect Answers

B:

Graph queries can select modeled Apstra resources and relationships using defined query constraints rather than enumerating every element by hand. However, the present verification decision is grounded in: An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again. For this issue, rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

C:

The change plan lists the correct impacted racks and tenant services while excluding a control tenant that does not depend on the device. Here, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone.

D:

The investigation identifies the relevant leaf and dependent service objects, supported by their actual observed conditions. That concerns graph Explorer topology dependency inspection rather than verifying remediation against IBA evidence. Current probe measurements return to the accepted range and the previously impacted tenant flow passes its functional acceptance check.

Question 900

An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again. Once the issue is resolved, which ongoing practice BEST prevents this type of failure?

  1. Pair every analytics-triggered incident with recorded before-and-after probe and service evidence.
  2. Alert on counter trends separately from binary interface state and review optics during hardware changes.
  3. Maintain a reviewed inventory of probe scopes, required telemetry sources and intended thresholds.
  4. Document which IBA probes support each service SLO and where monitoring coverage has gaps.

Explanation

Correct Answer

A:

This control reduces recurrence of the same class of failure: Remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone. Apply the recurring practice: Pair every analytics-triggered incident with recorded before-and-after probe and service evidence. The previous example was: An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again.

Incorrect Answers

B:

Alert on counter trends separately from binary interface state and review optics during hardware changes. That concerns interface discard and error probe investigation, while the issue here is verifying remediation against IBA evidence. Rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

C:

An Apstra IBA probe defines a supported analytical measurement or condition over selected network resources and requires appropriate source data. For this issue, rerun the relevant IBA probe or observe fresh samples, inspect the corrected resource and validate a controlled end-to-end service test.

D:

Document which IBA probes support each service SLO and where monitoring coverage has gaps. Here, remediation should be verified using fresh metric observations and the intended network-service outcome, not the administrative success of a change alone. Specifically for the prevention question, the case to validate is: An IBA alert stops showing new events after a maintenance action, but the underlying test traffic remains broken and the team never checks the service probes again.

Data Center, Specialist (JNCIS-DC) (JN0-481) Practice Tests