McAfee Secure

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 44

Question 430

At the Glenbrook transportation IT infrastructure office, a host uses one active SAN path despite multiple optimized and nonoptimized target routes being available. Which explanation best accounts for the failure?

  1. Raw block access depends on matching host partition filesystem and multipath configuration
  2. Enabling an object store server does not itself create every client-named bucket
  3. Multiple target connections need host multipathing logic to select healthy optimized paths
  4. Default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move

Explanation

Correct Answer

C:

The situation shows that multiple target connections need host multipathing logic to select healthy optimized paths, rather than merely a monitoring or presentation issue. Remediation is to enable supported multipath I/O with ALUA-aware path selection for the host platform. This result addresses the stated challenge at the Glenbrook transportation IT infrastructure office.

Incorrect Answers

A:

“Raw block access depends on matching host partition filesystem and multipath configuration” is not the controlling explanation for at the Glenbrook transportation IT infrastructure office, a host uses one active SAN path despite multiple optimized and nonoptimized target routes being available. The cited causal relationship is multiple target connections need host multipathing logic to select healthy optimized paths, the required evidence must show that a controlled link failure preserves disk availability and host path status reflects expected optimization. The matching answer is “Multiple target connections need host multipathing logic to select healthy optimized paths”.

B:

Although enabling an object store server does not itself create every client-named bucket, the presented symptoms do not support that as the primary cause; they indicate that multiple target connections need host multipathing logic to select healthy optimized paths. For the Glenbrook transportation IT infrastructure office, the direct corrective action is to enable supported multipath I/O with ALUA-aware path selection for the host platform.

D:

Default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move. That may occur elsewhere, but the evidence at the Glenbrook transportation IT infrastructure office instead points to the fact that multiple target connections need host multipathing logic to select healthy optimized paths.

Question 431

At the Glenbrook transportation IT infrastructure office, a host uses one active SAN path despite multiple optimized and nonoptimized target routes being available. What evidence would best demonstrate that the requirement is met?

  1. The host detects supported destination paths before old paths are retired
  2. An approved client mounts while a disallowed subnet remains blocked
  3. A controlled link failure preserves disk availability and host path status reflects expected optimization
  4. The expected NFS mount path resolves to the correct authorized volume

Explanation

Correct Answer

C:

Because multiple target connections need host multipathing logic to select healthy optimized paths, the required evidence must show that a controlled link failure preserves disk availability and host path status reflects expected optimization. A green job status alone is insufficient. This result addresses the stated challenge at the Glenbrook transportation IT infrastructure office.

Incorrect Answers

A:

Evidence that “The host detects supported destination paths before old paths are retired” occurred would not by itself establish resolution of the reported problem: at the Glenbrook transportation IT infrastructure office, a host uses one active SAN path despite multiple optimized and nonoptimized target routes being available. The specific reason is multiple target connections need host multipathing logic to select healthy optimized paths, the required evidence must show that a controlled link failure preserves disk availability and host path status reflects expected optimization. The applicable verification is “A controlled link failure preserves disk availability and host path status reflects expected optimization”.

B:

Evidence that “An approved client mounts while a disallowed subnet remains blocked” occurred would not by itself establish resolution of the reported problem: at the Glenbrook transportation IT infrastructure office, a host uses one active SAN path despite multiple optimized and nonoptimized target routes being available. The specific reason is multiple target connections need host multipathing logic to select healthy optimized paths, the required evidence must show that a controlled link failure preserves disk availability and host path status reflects expected optimization. The applicable verification is “A controlled link failure preserves disk availability and host path status reflects expected optimization”.

D:

At the Glenbrook transportation IT infrastructure office, a result about nfs mount namespace design would not show that the team corrected the failure where multiple target connections need host multipathing logic to select healthy optimized paths.

Question 432

At the Glenbrook transportation IT infrastructure office, a host uses one active SAN path despite multiple optimized and nonoptimized target routes being available. Which ongoing control best prevents this failure from recurring?

  1. Rotate secrets using an approved host-storage coordination procedure
  2. Review host multipath policies after SAN firmware or HBA changes
  3. Audit share and file ACLs when user groups change
  4. Include host rescans in block provisioning checklists

Explanation

Correct Answer

B:

The needed prevention is to review host multipath policies after SAN firmware or HBA changes. It directly sustains the original change to enable supported multipath I/O with ALUA-aware path selection for the host platform. This result addresses the stated challenge at the Glenbrook transportation IT infrastructure office.

Incorrect Answers

A:

That routine supports chap iscsi authentication, but the relevant ongoing risk requires the team to review host multipath policies after SAN firmware or HBA changes. For the Glenbrook transportation IT infrastructure office, the direct corrective action is to enable supported multipath I/O with ALUA-aware path selection for the host platform.

C:

Audit share and file ACLs when user groups change is not the primary recurring safeguard for this problem. The team should review host multipath policies after SAN firmware or HBA changes. For the Glenbrook transportation IT infrastructure office, the direct corrective action is to enable supported multipath I/O with ALUA-aware path selection for the host platform.

D:

“Include host rescans in block provisioning checklists” checks a different ongoing risk rather than the reported failure: at the Glenbrook transportation IT infrastructure office, a host uses one active SAN path despite multiple optimized and nonoptimized target routes being available. The relevant mechanism is multiple target connections need host multipathing logic to select healthy optimized paths, the required evidence must show that a controlled link failure preserves disk availability and host path status reflects expected optimization. The directly matched preventive control is “Review host multipath policies after SAN firmware or HBA changes”.

Question 433

At the Thornfield property systems infrastructure team, a new Fibre Channel initiator cannot reach NetApp targets because the switch zoning excludes its host WWPN. Which implementation choice best addresses the issue?

  1. Map the LUN to the correct igroup and use a consistent supported host-side discovery procedure
  2. Create approved FC zones permitting only intended host initiator and storage target WWPNs
  3. Set correct namespace junctions and allowed export policies for the intended mount paths
  4. Verify volume junction path state and placement in the SVM namespace

Explanation

Correct Answer

B:

Create approved FC zones permitting only intended host initiator and storage target WWPNs is the best response because FC fabric membership and zone access determine which initiator-target port pairs can communicate. A focused validation would establish that an FC fabric scan shows the correct target ports and the intended LUN becomes discoverable. This result addresses the stated challenge at the Thornfield property systems infrastructure team.

Incorrect Answers

A:

This alternative would be suitable where an existing LUN is not automatically exposed to all SAN clients without a mapping. It does not by itself resolve the need to create approved FC zones permitting only intended host initiator and storage target WWPNs. For the Thornfield property systems infrastructure team, the direct corrective action is to create approved FC zones permitting only intended host initiator and storage target WWPNs.

C:

The option addresses the separate situation where a valid volume is not addressable through an arbitrary client path unless it is exposed in the SVM namespace. For this case, the more appropriate response is to create approved FC zones permitting only intended host initiator and storage target WWPNs. For the Thornfield property systems infrastructure team, the direct corrective action is to create approved FC zones permitting only intended host initiator and storage target WWPNs.

D:

This focuses on missing nas junction access; it does not directly correct the condition that FC fabric membership and zone access determine which initiator-target port pairs can communicate. For the Thornfield property systems infrastructure team, the direct corrective action is to create approved FC zones permitting only intended host initiator and storage target WWPNs.

Question 434

At the Thornfield property systems infrastructure team, a new Fibre Channel initiator cannot reach NetApp targets because the switch zoning excludes its host WWPN. Which issue should the team identify as the primary cause?

  1. FC fabric membership and zone access determine which initiator-target port pairs can communicate
  2. A LUN is normally visible through its owning node and HA partner rather than every cluster target by default
  3. An igroup entry must match the active initiator identity used for block access
  4. Exposed static object credentials can grant unintended bucket access regardless of endpoint health

Explanation

Correct Answer

A:

The situation shows that FC fabric membership and zone access determine which initiator-target port pairs can communicate, rather than merely a monitoring or presentation issue. Remediation is to create approved FC zones permitting only intended host initiator and storage target WWPNs. This result addresses the stated challenge at the Thornfield property systems infrastructure team.

Incorrect Answers

B:

A LUN is normally visible through its owning node and HA partner rather than every cluster target by default. That may occur elsewhere, but the evidence at the Thornfield property systems infrastructure team instead points to the fact that FC fabric membership and zone access determine which initiator-target port pairs can communicate.

C:

The proposed cause is relevant to wrong iscsi initiator identity, but it does not explain why FC fabric membership and zone access determine which initiator-target port pairs can communicate in the reported case. For the Thornfield property systems infrastructure team, the direct corrective action is to create approved FC zones permitting only intended host initiator and storage target WWPNs.

D:

Exposed static object credentials can grant unintended bucket access regardless of endpoint health. That is not the mechanism that accounts for the stated failure at the Thornfield property systems infrastructure team.

Question 435

At the Thornfield property systems infrastructure team, a new Fibre Channel initiator cannot reach NetApp targets because the switch zoning excludes its host WWPN. What is the strongest acceptance test for this improvement?

  1. A compatible host discovers the intended NVMe namespace and completes an IO acceptance test
  2. A dual-client access test confirms the intended effective permissions after updates from both platforms
  3. An FC fabric scan shows the correct target ports and the intended LUN becomes discoverable
  4. One user reads an authorized object while another user's unauthorized request is denied

Explanation

Correct Answer

C:

This tests the real business behavior: an FC fabric scan shows the correct target ports and the intended LUN becomes discoverable. It specifically checks whether the risk that FC fabric membership and zone access determine which initiator-target port pairs can communicate has been reduced. This result addresses the stated challenge at the Thornfield property systems infrastructure team.

Incorrect Answers

A:

Evidence that “A compatible host discovers the intended NVMe namespace and completes an IO acceptance test” occurred would not by itself establish resolution of the reported problem: at the Thornfield property systems infrastructure team, a new Fibre Channel initiator cannot reach NetApp targets because the switch zoning excludes its host WWPN. The specific reason is fC fabric membership and zone access determine which initiator-target port pairs can communicate. The applicable verification is “An FC fabric scan shows the correct target ports and the intended LUN becomes discoverable”.

B:

At the Thornfield property systems infrastructure team, a result about mixed security style governance would not show that the team corrected the failure where FC fabric membership and zone access determine which initiator-target port pairs can communicate.

D:

This result would validate s3 user group policy authorization, not the intended improvement. The needed observation is that an FC fabric scan shows the correct target ports and the intended LUN becomes discoverable. For the Thornfield property systems infrastructure team, the direct corrective action is to create approved FC zones permitting only intended host initiator and storage target WWPNs.

Question 436

At the Thornfield property systems infrastructure team, a new Fibre Channel initiator cannot reach NetApp targets because the switch zoning excludes its host WWPN. What should be monitored or reviewed during future changes?

  1. Audit zoning after replacing HBAs or target FC adapters
  2. Audit igroup membership during server lifecycle events
  3. Build SLM path checks into cross-pair migration procedures
  4. Review S3 policies and group membership after tenant changes

Explanation

Correct Answer

A:

After implementation, the team should audit zoning after replacing HBAs or target FC adapters as the appropriate recurring safeguard against the identified issue. This result addresses the stated challenge at the Thornfield property systems infrastructure team.

Incorrect Answers

B:

“Audit igroup membership during server lifecycle events” checks a different ongoing risk rather than the reported failure: at the Thornfield property systems infrastructure team, a new Fibre Channel initiator cannot reach NetApp targets because the switch zoning excludes its host WWPN. The relevant mechanism is fC fabric membership and zone access determine which initiator-target port pairs can communicate. The directly matched preventive control is “Audit zoning after replacing HBAs or target FC adapters”.

C:

The option would have the team build SLM path checks into cross-pair migration procedures. For this situation, the preventive control should instead be to audit zoning after replacing HBAs or target FC adapters. For the Thornfield property systems infrastructure team, the direct corrective action is to create approved FC zones permitting only intended host initiator and storage target WWPNs.

D:

“Review S3 policies and group membership after tenant changes” checks a different ongoing risk rather than the reported failure: at the Thornfield property systems infrastructure team, a new Fibre Channel initiator cannot reach NetApp targets because the switch zoning excludes its host WWPN. The relevant mechanism is fC fabric membership and zone access determine which initiator-target port pairs can communicate. The directly matched preventive control is “Audit zoning after replacing HBAs or target FC adapters”.

Question 437

At the Highbridge customer services storage department, a LUN move between ONTAP HA pairs leaves hosts without correct access paths due to stale reporting nodes. Which solution most directly addresses the stated requirement?

  1. Verify supported NVMe/TCP service configuration and map namespaces to authorized host subsystem access
  2. Configure suitable SMB home directory share and per-user file permissions under the intended AD identities
  3. Verify volume junction path state and placement in the SVM namespace
  4. Review and update Selective LUN Map reporting nodes and host multipathing during the volume move

Explanation

Correct Answer

D:

For the Highbridge customer services storage department, the appropriate correction is to review and update Selective LUN Map reporting nodes and host multipathing during the volume move. The decisive reason is that a LUN is normally visible through its owning node and HA partner rather than every cluster target by default; acceptance evidence is that the host detects supported destination paths before old paths are retired.

Incorrect Answers

A:

The option addresses the separate situation where NVMe namespaces and host discovery follow different protocol constructs from iSCSI LUN mapping. For this case, the more appropriate response is to review and update Selective LUN Map reporting nodes and host multipathing during the volume move. For the Highbridge customer services storage department, the direct corrective action is to review and update Selective LUN Map reporting nodes and host multipathing during the volume move.

B:

This focuses on smb home directory sharing; it does not directly correct the condition that a LUN is normally visible through its owning node and HA partner rather than every cluster target by default. For the Highbridge customer services storage department, the direct corrective action is to review and update Selective LUN Map reporting nodes and host multipathing during the volume move.

C:

Verify volume junction path state and placement in the SVM namespace can be useful for another workload, but it leaves the immediate failure unresolved. Here the priority is to review and update Selective LUN Map reporting nodes and host multipathing during the volume move. For the Highbridge customer services storage department, the direct corrective action is to review and update Selective LUN Map reporting nodes and host multipathing during the volume move.

Question 438

At the Highbridge customer services storage department, a LUN move between ONTAP HA pairs leaves hosts without correct access paths due to stale reporting nodes. What underlying problem most directly explains the observed behavior?

  1. A SAN initiator must discover actual iSCSI target endpoints before accessing mapped LUNs
  2. A LUN is normally visible through its owning node and HA partner rather than every cluster target by default
  3. An allow entry at share level does not override a restrictive underlying file ACL
  4. Encrypted connections still require certificate identity validation to prevent wrong-endpoint trust

Explanation

Correct Answer

B:

The specific data failure is that a LUN is normally visible through its owning node and HA partner rather than every cluster target by default. It can be addressed through the controlled change to review and update Selective LUN Map reporting nodes and host multipathing during the volume move. This result addresses the stated challenge at the Highbridge customer services storage department.

Incorrect Answers

A:

The proposed cause is relevant to san iscsi target discovery, but it does not explain why a LUN is normally visible through its owning node and HA partner rather than every cluster target by default in the reported case. For the Highbridge customer services storage department, the direct corrective action is to review and update Selective LUN Map reporting nodes and host multipathing during the volume move.

C:

“An allow entry at share level does not override a restrictive underlying file ACL” is not the controlling explanation for at the Highbridge customer services storage department, a LUN move between ONTAP HA pairs leaves hosts without correct access paths due to stale reporting nodes. The matching answer is “A LUN is normally visible through its owning node and HA partner rather than every cluster target by default”.

D:

Although encrypted connections still require certificate identity validation to prevent wrong-endpoint trust, the presented symptoms do not support that as the primary cause; they indicate that a LUN is normally visible through its owning node and HA partner rather than every cluster target by default. For the Highbridge customer services storage department, the direct corrective action is to review and update Selective LUN Map reporting nodes and host multipathing during the volume move.

Question 439

At the Highbridge customer services storage department, a LUN move between ONTAP HA pairs leaves hosts without correct access paths due to stale reporting nodes. What evidence would justify marking this issue resolved?

  1. A controlled switch failure leaves at least one valid host path to the LUN
  2. The host detects supported destination paths before old paths are retired
  3. An approved client mounts while a disallowed subnet remains blocked
  4. The authorized user creates and retrieves a test object in the intended bucket

Explanation

Correct Answer

B:

The intended correction is to review and update Selective LUN Map reporting nodes and host multipathing during the volume move. The decisive verification is that the host detects supported destination paths before old paths are retired, rather than only confirming configuration was saved. This result addresses the stated challenge at the Highbridge customer services storage department.

Incorrect Answers

A:

The alternative checks whether a controlled switch failure leaves at least one valid host path to the LUN, which is not the direct acceptance criterion for the stated problem. The required result is that the host detects supported destination paths before old paths are retired. For the Highbridge customer services storage department, the direct corrective action is to review and update Selective LUN Map reporting nodes and host multipathing during the volume move.

C:

Evidence that “An approved client mounts while a disallowed subnet remains blocked” occurred would not by itself establish resolution of the reported problem: at the Highbridge customer services storage department, a LUN move between ONTAP HA pairs leaves hosts without correct access paths due to stale reporting nodes. The applicable verification is “The host detects supported destination paths before old paths are retired”.

D:

Evidence that “The authorized user creates and retrieves a test object in the intended bucket” occurred would not by itself establish resolution of the reported problem: at the Highbridge customer services storage department, a LUN move between ONTAP HA pairs leaves hosts without correct access paths due to stale reporting nodes. The applicable verification is “The host detects supported destination paths before old paths are retired”.

Question 440

At the Highbridge customer services storage department, a LUN move between ONTAP HA pairs leaves hosts without correct access paths due to stale reporting nodes. What follow-up practice would reduce this risk over time?

  1. Rotate secrets using an approved host-storage coordination procedure
  2. Verify NFSv4 domain settings when rebuilding client operating systems
  3. Plan reporting node changes with every cross-pair SAN volume move
  4. Audit junction and volume mount status after provisioning changes

Explanation

Correct Answer

C:

The continuing safeguard is to plan reporting node changes with every cross-pair SAN volume move. It helps avoid the original condition: a LUN is normally visible through its owning node and HA partner rather than every cluster target by default. This result addresses the stated challenge at the Highbridge customer services storage department.

Incorrect Answers

A:

The option would have the team rotate secrets using an approved host-storage coordination procedure. For this situation, the preventive control should instead be to plan reporting node changes with every cross-pair SAN volume move. For the Highbridge customer services storage department, the direct corrective action is to review and update Selective LUN Map reporting nodes and host multipathing during the volume move.

B:

“Verify NFSv4 domain settings when rebuilding client operating systems” checks a different ongoing risk rather than the reported failure: at the Highbridge customer services storage department, a LUN move between ONTAP HA pairs leaves hosts without correct access paths due to stale reporting nodes. The directly matched preventive control is “Plan reporting node changes with every cross-pair SAN volume move”.

D:

“Audit junction and volume mount status after provisioning changes” checks a different ongoing risk rather than the reported failure: at the Highbridge customer services storage department, a LUN move between ONTAP HA pairs leaves hosts without correct access paths due to stale reporting nodes. The directly matched preventive control is “Plan reporting node changes with every cross-pair SAN volume move”.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests