McAfee Secure

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 43

Question 420

At the Quayford environmental data center, a Linux database host cannot discover its ONTAP block storage because the initiator uses an unrelated target IP. Which ongoing control best prevents this failure from recurring?

  1. Recheck NVMe host support and network requirements during upgrades
  2. Monitor directory resolution and SMB trust health after DNS updates
  3. Audit junction and volume mount status after provisioning changes
  4. Recheck target network reachability after SAN LIF changes

Explanation

Correct Answer

D:

This control works beyond the initial remediation because it requires the team to recheck target network reachability after SAN LIF changes. This result addresses the stated challenge at the Quayford environmental data center.

Incorrect Answers

A:

That routine supports san nvme namespace support, but the relevant ongoing risk requires the team to recheck target network reachability after SAN LIF changes. For the Quayford environmental data center, the direct corrective action is to configure iSCSI discovery against reachable data LIFs on the intended SAN-enabled SVM.

B:

“Monitor directory resolution and SMB trust health after DNS updates” checks a different ongoing risk rather than the reported failure: at the Quayford environmental data center, a Linux database host cannot discover its ONTAP block storage because the initiator uses an unrelated target IP. The relevant mechanism is it requires the team to recheck target network reachability after SAN LIF changes. The directly matched preventive control is “Recheck target network reachability after SAN LIF changes”.

C:

Audit junction and volume mount status after provisioning changes is not the primary recurring safeguard for this problem. The team should recheck target network reachability after SAN LIF changes. For the Quayford environmental data center, the direct corrective action is to configure iSCSI discovery against reachable data LIFs on the intended SAN-enabled SVM.

Question 421

At the Foxhaven financial services data center, a new iSCSI server logs in successfully but cannot see its assigned LUN because the igroup contains another initiator name. Which implementation choice best addresses the issue?

  1. Create approved FC zones permitting only intended host initiator and storage target WWPNs
  2. Configure a trusted TLS certificate and consistent S3 endpoint hostname for the supported SVM
  3. Create or update the correct igroup with the authorized host initiator IQN or identifier
  4. Verify host WWPN zone membership igroup mapping and target port login state

Explanation

Correct Answer

C:

This is the direct data-engineering remedy: create or update the correct igroup with the authorized host initiator IQN or identifier. The observed risk is that LUN access is controlled by matching initiator identities in mapped igroups; a passing acceptance check would show that the intended host sees its LUN while an unrelated initiator has no access. This result addresses the stated challenge at the Foxhaven financial services data center.

Incorrect Answers

A:

This alternative would be suitable where FC fabric membership and zone access determine which initiator-target port pairs can communicate. It does not by itself resolve the need to create or update the correct igroup with the authorized host initiator IQN or identifier. For the Foxhaven financial services data center, the direct corrective action is to create or update the correct igroup with the authorized host initiator IQN or identifier.

B:

Configure a trusted TLS certificate and consistent S3 endpoint hostname for the supported SVM addresses a different kind of problem: encrypted connections still require certificate identity validation to prevent wrong-endpoint trust. Here the reported weakness is that LUN access is controlled by matching initiator identities in mapped igroups. For the Foxhaven financial services data center, the direct corrective action is to create or update the correct igroup with the authorized host initiator IQN or identifier.

D:

This focuses on fc lun invisibility troubleshooting; it does not directly correct the condition that LUN access is controlled by matching initiator identities in mapped igroups. For the Foxhaven financial services data center, the direct corrective action is to create or update the correct igroup with the authorized host initiator IQN or identifier.

Question 422

At the Foxhaven financial services data center, a new iSCSI server logs in successfully but cannot see its assigned LUN because the igroup contains another initiator name. Which issue should the team identify as the primary cause?

  1. LUN access is controlled by matching initiator identities in mapped igroups
  2. A SAN initiator must discover actual iSCSI target endpoints before accessing mapped LUNs
  3. Host kernels may need a discovery refresh after new target LUN mappings
  4. Default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move

Explanation

Correct Answer

A:

The situation shows that LUN access is controlled by matching initiator identities in mapped igroups, rather than merely a monitoring or presentation issue. Remediation is to create or update the correct igroup with the authorized host initiator IQN or identifier. This result addresses the stated challenge at the Foxhaven financial services data center.

Incorrect Answers

B:

A SAN initiator must discover actual iSCSI target endpoints before accessing mapped LUNs. That may occur elsewhere, but the evidence at the Foxhaven financial services data center instead points to the fact that LUN access is controlled by matching initiator identities in mapped igroups.

C:

The proposed cause is relevant to san host stale device scan, but it does not explain why LUN access is controlled by matching initiator identities in mapped igroups in the reported case. For the Foxhaven financial services data center, the direct corrective action is to create or update the correct igroup with the authorized host initiator IQN or identifier.

D:

Default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move. That is not the mechanism that accounts for the stated failure at the Foxhaven financial services data center.

Question 423

At the Foxhaven financial services data center, a new iSCSI server logs in successfully but cannot see its assigned LUN because the igroup contains another initiator name. What is the strongest acceptance test for this improvement?

  1. A compatible host discovers the intended NVMe namespace and completes an IO acceptance test
  2. The corrected path returns to healthy status and a failover IO test completes
  3. The intended host sees its LUN while an unrelated initiator has no access
  4. A test identity gains exactly the intended folder access after an approved ACL correction

Explanation

Correct Answer

C:

This tests the real business behavior: the intended host sees its LUN while an unrelated initiator has no access. It specifically checks whether the risk that LUN access is controlled by matching initiator identities in mapped igroups has been reduced. This result addresses the stated challenge at the Foxhaven financial services data center.

Incorrect Answers

A:

Evidence that “A compatible host discovers the intended NVMe namespace and completes an IO acceptance test” occurred would not by itself establish resolution of the reported problem: at the Foxhaven financial services data center, a new iSCSI server logs in successfully but cannot see its assigned LUN because the igroup contains another initiator name. The specific reason is lUN access is controlled by matching initiator identities in mapped igroups; a passing acceptance check would show that the intended host sees its LUN while an unrelated initiator has no access. The applicable verification is “The intended host sees its LUN while an unrelated initiator has no access”.

B:

At the Foxhaven financial services data center, a result about single host path failure triage would not show that the team corrected the failure where LUN access is controlled by matching initiator identities in mapped igroups.

D:

This result would validate smb share acl versus file acl, not the intended improvement. The needed observation is that the intended host sees its LUN while an unrelated initiator has no access. For the Foxhaven financial services data center, the direct corrective action is to create or update the correct igroup with the authorized host initiator IQN or identifier.

Question 424

At the Foxhaven financial services data center, a new iSCSI server logs in successfully but cannot see its assigned LUN because the igroup contains another initiator name. What should be monitored or reviewed during future changes?

  1. Audit zoning after replacing HBAs or target FC adapters
  2. Audit igroup membership during server lifecycle events
  3. Review S3 policies and group membership after tenant changes
  4. Track identity mapping failures after directory changes

Explanation

Correct Answer

B:

This control works beyond the initial remediation because it requires the team to audit igroup membership during server lifecycle events. This result addresses the stated challenge at the Foxhaven financial services data center.

Incorrect Answers

A:

Audit zoning after replacing HBAs or target FC adapters is not the primary recurring safeguard for this problem. The team should audit igroup membership during server lifecycle events. For the Foxhaven financial services data center, the direct corrective action is to create or update the correct igroup with the authorized host initiator IQN or identifier.

C:

The option would have the team review S3 policies and group membership after tenant changes. For this situation, the preventive control should instead be to audit igroup membership during server lifecycle events. For the Foxhaven financial services data center, the direct corrective action is to create or update the correct igroup with the authorized host initiator IQN or identifier.

D:

“Track identity mapping failures after directory changes” checks a different ongoing risk rather than the reported failure: at the Foxhaven financial services data center, a new iSCSI server logs in successfully but cannot see its assigned LUN because the igroup contains another initiator name. The relevant mechanism is it requires the team to audit igroup membership during server lifecycle events. The directly matched preventive control is “Audit igroup membership during server lifecycle events”.

Question 425

At the Umberfield pharmaceutical data center administration team, storage administrators create a new ONTAP LUN but the host does not detect it because no mapping exists. Which solution most directly addresses the stated requirement?

  1. Follow supported ONTAP LUN and host OS provisioning guidance including correct device layout
  2. Map the LUN to the correct igroup and use a consistent supported host-side discovery procedure
  3. Test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability
  4. Set correct namespace junctions and allowed export policies for the intended mount paths

Explanation

Correct Answer

B:

The primary failure mode is that an existing LUN is not automatically exposed to all SAN clients without a mapping. The proposed action directly fixes it by requiring the team to map the LUN to the correct igroup and use a consistent supported host-side discovery procedure; afterward, verify that a host rescan discovers the intended logical unit with a stable mapping and correct size. This result addresses the stated challenge at the Umberfield pharmaceutical data center administration team.

Incorrect Answers

A:

The option addresses the separate situation where raw block access depends on matching host partition filesystem and multipath configuration. For this case, the more appropriate response is to map the LUN to the correct igroup and use a consistent supported host-side discovery procedure. For the Umberfield pharmaceutical data center administration team, the direct corrective action is to map the LUN to the correct igroup and use a consistent supported host-side discovery procedure.

C:

Test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability can be useful for another workload, but it leaves the immediate failure unresolved. Here the priority is to map the LUN to the correct igroup and use a consistent supported host-side discovery procedure. For the Umberfield pharmaceutical data center administration team, the direct corrective action is to map the LUN to the correct igroup and use a consistent supported host-side discovery procedure.

D:

The suggested action is to set correct namespace junctions and allowed export policies for the intended mount paths, but the facts at the Umberfield pharmaceutical data center administration team require a correction for the distinct problem that an existing LUN is not automatically exposed to all SAN clients without a mapping.

Question 426

At the Umberfield pharmaceutical data center administration team, storage administrators create a new ONTAP LUN but the host does not detect it because no mapping exists. What underlying problem most directly explains the observed behavior?

  1. A mapped igroup can expose more reachable target interfaces than the host policy permits without portset restrictions
  2. A successful SMB login does not guarantee the same identity has authorized UNIX file rights
  3. A reachable nonoptimized route may carry extra interconnect work compared with a preferred owning-node route
  4. An existing LUN is not automatically exposed to all SAN clients without a mapping

Explanation

Correct Answer

D:

The problem stems from the fact that an existing LUN is not automatically exposed to all SAN clients without a mapping. A correct solution would map the LUN to the correct igroup and use a consistent supported host-side discovery procedure and check that a host rescan discovers the intended logical unit with a stable mapping and correct size. This result addresses the stated challenge at the Umberfield pharmaceutical data center administration team.

Incorrect Answers

A:

The proposed cause is relevant to portset constrained san presentation, but it does not explain why an existing LUN is not automatically exposed to all SAN clients without a mapping in the reported case. For the Umberfield pharmaceutical data center administration team, the direct corrective action is to map the LUN to the correct igroup and use a consistent supported host-side discovery procedure.

B:

A successful SMB login does not guarantee the same identity has authorized UNIX file rights. That is not the mechanism that accounts for the stated failure at the Umberfield pharmaceutical data center administration team.

C:

“A reachable nonoptimized route may carry extra interconnect work compared with a preferred owning-node route” is not the controlling explanation for at the Umberfield pharmaceutical data center administration team, storage administrators create a new ONTAP LUN but the host does not detect it because no mapping exists. The matching answer is “An existing LUN is not automatically exposed to all SAN clients without a mapping”.

Question 427

At the Umberfield pharmaceutical data center administration team, storage administrators create a new ONTAP LUN but the host does not detect it because no mapping exists. What evidence would justify marking this issue resolved?

  1. An FC fabric scan shows the correct target ports and the intended LUN becomes discoverable
  2. The refreshed host device list contains the expected stable LUN identity and size
  3. A host rescan discovers the intended logical unit with a stable mapping and correct size
  4. A mapped user accesses only the intended shared files from both client protocols

Explanation

Correct Answer

C:

At the Umberfield pharmaceutical data center administration team, evidence that a host rescan discovers the intended logical unit with a stable mapping and correct size directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

The alternative checks whether an FC fabric scan shows the correct target ports and the intended LUN becomes discoverable, which is not the direct acceptance criterion for the stated problem. The required result is that a host rescan discovers the intended logical unit with a stable mapping and correct size. For the Umberfield pharmaceutical data center administration team, the direct corrective action is to map the LUN to the correct igroup and use a consistent supported host-side discovery procedure.

B:

This result would validate san host stale device scan, not the intended improvement. The needed observation is that a host rescan discovers the intended logical unit with a stable mapping and correct size. For the Umberfield pharmaceutical data center administration team, the direct corrective action is to map the LUN to the correct igroup and use a consistent supported host-side discovery procedure.

D:

Evidence that “A mapped user accesses only the intended shared files from both client protocols” occurred would not by itself establish resolution of the reported problem: at the Umberfield pharmaceutical data center administration team, storage administrators create a new ONTAP LUN but the host does not detect it because no mapping exists. The applicable verification is “A host rescan discovers the intended logical unit with a stable mapping and correct size”.

Question 428

At the Umberfield pharmaceutical data center administration team, storage administrators create a new ONTAP LUN but the host does not detect it because no mapping exists. What follow-up practice would reduce this risk over time?

  1. Review LUN mappings and remove obsolete initiators after decommissioning
  2. Review portset members whenever SAN LIFs or hosts are added
  3. Monitor SAN endpoint subnet and route changes
  4. Review S3 policies and group membership after tenant changes

Explanation

Correct Answer

A:

The team should review LUN mappings and remove obsolete initiators after decommissioning. That recurring practice targets the same weakness, namely that an existing LUN is not automatically exposed to all SAN clients without a mapping. This result addresses the stated challenge at the Umberfield pharmaceutical data center administration team.

Incorrect Answers

B:

“Review portset members whenever SAN LIFs or hosts are added” checks a different ongoing risk rather than the reported failure: at the Umberfield pharmaceutical data center administration team, storage administrators create a new ONTAP LUN but the host does not detect it because no mapping exists. The directly matched preventive control is “Review LUN mappings and remove obsolete initiators after decommissioning”.

C:

That routine supports wrong iscsi network subnet, but the relevant ongoing risk requires the team to review LUN mappings and remove obsolete initiators after decommissioning. For the Umberfield pharmaceutical data center administration team, the direct corrective action is to map the LUN to the correct igroup and use a consistent supported host-side discovery procedure.

D:

“Review S3 policies and group membership after tenant changes” checks a different ongoing risk rather than the reported failure: at the Umberfield pharmaceutical data center administration team, storage administrators create a new ONTAP LUN but the host does not detect it because no mapping exists. The directly matched preventive control is “Review LUN mappings and remove obsolete initiators after decommissioning”.

Question 429

At the Glenbrook transportation IT infrastructure office, a host uses one active SAN path despite multiple optimized and nonoptimized target routes being available. Which design decision is the best response?

  1. Follow supported ONTAP LUN and host OS provisioning guidance including correct device layout
  2. Enable supported multipath I/O with ALUA-aware path selection for the host platform
  3. Review ALUA states LUN ownership and host multipath path selection
  4. Check ONTAP LUN and containing volume online state and mapping before changing switches

Explanation

Correct Answer

B:

For the Glenbrook transportation IT infrastructure office, the appropriate correction is to enable supported multipath I/O with ALUA-aware path selection for the host platform. The decisive reason is that multiple target connections need host multipathing logic to select healthy optimized paths; acceptance evidence is that a controlled link failure preserves disk availability and host path status reflects expected optimization.

Incorrect Answers

A:

Follow supported ONTAP LUN and host OS provisioning guidance including correct device layout can be useful for another workload, but it leaves the immediate failure unresolved. Here the priority is to enable supported multipath I/O with ALUA-aware path selection for the host platform. For the Glenbrook transportation IT infrastructure office, the direct corrective action is to enable supported multipath I/O with ALUA-aware path selection for the host platform.

C:

This alternative would be suitable where a reachable nonoptimized route may carry extra interconnect work compared with a preferred owning-node route. It does not by itself resolve the need to enable supported multipath I/O with ALUA-aware path selection for the host platform. For the Glenbrook transportation IT infrastructure office, the direct corrective action is to enable supported multipath I/O with ALUA-aware path selection for the host platform.

D:

Check ONTAP LUN and containing volume online state and mapping before changing switches addresses a different kind of problem: protocol login success does not guarantee the logical unit itself is online and accessible. Here the reported weakness is that multiple target connections need host multipathing logic to select healthy optimized paths. For the Glenbrook transportation IT infrastructure office, the direct corrective action is to enable supported multipath I/O with ALUA-aware path selection for the host platform.

Question 430

At the Glenbrook transportation IT infrastructure office, a host uses one active SAN path despite multiple optimized and nonoptimized target routes being available. Which explanation best accounts for the failure?

  1. Raw block access depends on matching host partition filesystem and multipath configuration
  2. Enabling an object store server does not itself create every client-named bucket
  3. Multiple target connections need host multipathing logic to select healthy optimized paths
  4. Default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move

Explanation

Correct Answer

C:

The situation shows that multiple target connections need host multipathing logic to select healthy optimized paths, rather than merely a monitoring or presentation issue. Remediation is to enable supported multipath I/O with ALUA-aware path selection for the host platform. This result addresses the stated challenge at the Glenbrook transportation IT infrastructure office.

Incorrect Answers

A:

“Raw block access depends on matching host partition filesystem and multipath configuration” is not the controlling explanation for at the Glenbrook transportation IT infrastructure office, a host uses one active SAN path despite multiple optimized and nonoptimized target routes being available. The cited causal relationship is multiple target connections need host multipathing logic to select healthy optimized paths, the required evidence must show that a controlled link failure preserves disk availability and host path status reflects expected optimization. The matching answer is “Multiple target connections need host multipathing logic to select healthy optimized paths”.

B:

Although enabling an object store server does not itself create every client-named bucket, the presented symptoms do not support that as the primary cause; they indicate that multiple target connections need host multipathing logic to select healthy optimized paths. For the Glenbrook transportation IT infrastructure office, the direct corrective action is to enable supported multipath I/O with ALUA-aware path selection for the host platform.

D:

Default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move. That may occur elsewhere, but the evidence at the Glenbrook transportation IT infrastructure office instead points to the fact that multiple target connections need host multipathing logic to select healthy optimized paths.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests