McAfee Secure

Exam Code: NS0-165

Exam Name: NetApp Certified Data Administrator, ONTAP

Certification Provider: Network Appliance

Corresponding Certification: NCDA ONTAP

Network Appliance NS0-165 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

60 Questions & Answers with Testing Engine

"NetApp Certified Data Administrator, ONTAP Exam", also known as NS0-165 exam, is a Network Appliance certification exam.

Pass your tests with the always up-to-date NS0-165 Exam Engine. Your NS0-165 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Network Appliance NS0-165 Practice Test 49

Question 480

At the Oakport bank storage operations team, a host receives a block device error even though the iSCSI network and target sessions are healthy. Which ongoing control best prevents this failure from recurring?

  1. Revalidate initiator names after OS rebuilds
  2. Recheck NVMe host support and network requirements during upgrades
  3. Include LUN operational state in SAN incident triage
  4. Monitor directory resolution and SMB trust health after DNS updates

Explanation

Correct Answer

C:

After implementation, the team should include LUN operational state in SAN incident triage as the appropriate recurring safeguard against the identified issue. This result addresses the stated challenge at the Oakport bank storage operations team.

Incorrect Answers

A:

That routine supports wrong iscsi initiator identity, but the relevant ongoing risk requires the team to include LUN operational state in SAN incident triage. For the Oakport bank storage operations team, the direct corrective action is to check ONTAP LUN and containing volume online state and mapping before changing switches.

B:

“Recheck NVMe host support and network requirements during upgrades” checks a different ongoing risk rather than the reported failure: at the Oakport bank storage operations team, a host receives a block device error even though the iSCSI network and target sessions are healthy. The directly matched preventive control is “Include LUN operational state in SAN incident triage”.

D:

“Monitor directory resolution and SMB trust health after DNS updates” checks a different ongoing risk rather than the reported failure: at the Oakport bank storage operations team, a host receives a block device error even though the iSCSI network and target sessions are healthy. The directly matched preventive control is “Include LUN operational state in SAN incident triage”.

Question 481

At the Claremont municipal storage systems office, a LUN migrates to another HA pair and clients lose access because expected new reporting paths were not prepared. Which implementation choice best addresses the issue?

  1. Inspect host MPIO session target LIF port and switch connectivity for the failed path
  2. Configure supported UNIX-to-Windows or Windows-to-UNIX name mapping for the shared SVM
  3. Add or validate destination reporting nodes and update host MPIO path discovery before removing old paths
  4. Configure supported iSCSI CHAP authentication with coordinated initiator and target settings

Explanation

Correct Answer

C:

This is the direct data-engineering remedy: add or validate destination reporting nodes and update host MPIO path discovery before removing old paths. The observed risk is that default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move; a passing acceptance check would show that a host IO test succeeds on the new optimized paths after the migration. This result addresses the stated challenge at the Claremont municipal storage systems office.

Incorrect Answers

A:

This alternative would be suitable where a healthy logical unit can still be unreachable over one independent transport path. It does not by itself resolve the need to add or validate destination reporting nodes and update host MPIO path discovery before removing old paths. For the Claremont municipal storage systems office, the direct corrective action is to add or validate destination reporting nodes and update host MPIO path discovery before removing old paths.

B:

Configure supported UNIX-to-Windows or Windows-to-UNIX name mapping for the shared SVM addresses a different kind of problem: multiprotocol file access may require valid identity translation between permission models. Here the reported weakness is that default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move. For the Claremont municipal storage systems office, the direct corrective action is to add or validate destination reporting nodes and update host MPIO path discovery before removing old paths.

D:

This focuses on chap iscsi authentication; it does not directly correct the condition that default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move. For the Claremont municipal storage systems office, the direct corrective action is to add or validate destination reporting nodes and update host MPIO path discovery before removing old paths.

Question 482

At the Claremont municipal storage systems office, a LUN migrates to another HA pair and clients lose access because expected new reporting paths were not prepared. Which issue should the team identify as the primary cause?

  1. Default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move
  2. Host kernels may need a discovery refresh after new target LUN mappings
  3. A valid mount path can still be denied by the first matching export rule or missing client match
  4. S3 credentials establish identity but policy statements determine what operations and resources are permitted

Explanation

Correct Answer

A:

The situation shows that default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move, rather than merely a monitoring or presentation issue. Remediation is to add or validate destination reporting nodes and update host MPIO path discovery before removing old paths. This result addresses the stated challenge at the Claremont municipal storage systems office.

Incorrect Answers

B:

Host kernels may need a discovery refresh after new target LUN mappings. That may occur elsewhere, but the evidence at the Claremont municipal storage systems office instead points to the fact that default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move.

C:

The proposed cause is relevant to nfs export client mismatch, but it does not explain why default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move in the reported case. For the Claremont municipal storage systems office, the direct corrective action is to add or validate destination reporting nodes and update host MPIO path discovery before removing old paths.

D:

S3 credentials establish identity but policy statements determine what operations and resources are permitted. That is not the mechanism that accounts for the stated failure at the Claremont municipal storage systems office.

Question 483

At the Claremont municipal storage systems office, a LUN migrates to another HA pair and clients lose access because expected new reporting paths were not prepared. What is the strongest acceptance test for this improvement?

  1. The corrected LUN is online mapped and serves a controlled read-write test
  2. A host rescan discovers the intended logical unit with a stable mapping and correct size
  3. The required client path resolves correctly after the junction is restored
  4. A host IO test succeeds on the new optimized paths after the migration

Explanation

Correct Answer

D:

The intended correction is to add or validate destination reporting nodes and update host MPIO path discovery before removing old paths. The decisive verification is that a host IO test succeeds on the new optimized paths after the migration, rather than only confirming configuration was saved. This result addresses the stated challenge at the Claremont municipal storage systems office.

Incorrect Answers

A:

Evidence that “The corrected LUN is online mapped and serves a controlled read-write test” occurred would not by itself establish resolution of the reported problem: at the Claremont municipal storage systems office, a LUN migrates to another HA pair and clients lose access because expected new reporting paths were not prepared. The specific reason is default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move; a passing acceptance check would show that a host IO test succeeds on the new optimized paths after the migration. The applicable verification is “A host IO test succeeds on the new optimized paths after the migration”.

B:

At the Claremont municipal storage systems office, a result about lun mapping and lun id would not show that the team corrected the failure where default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move.

C:

The alternative checks whether the required client path resolves correctly after the junction is restored, which is not the direct acceptance criterion for the stated problem. The required result is that a host IO test succeeds on the new optimized paths after the migration. For the Claremont municipal storage systems office, the direct corrective action is to add or validate destination reporting nodes and update host MPIO path discovery before removing old paths.

Question 484

At the Claremont municipal storage systems office, a LUN migrates to another HA pair and clients lose access because expected new reporting paths were not prepared. What should be monitored or reviewed during future changes?

  1. Build SLM path checks into cross-pair migration procedures
  2. Monitor path state changes after storage failover and volume moves
  3. Review mount documentation and junction layout during reorganization
  4. Track identity mapping failures after directory changes

Explanation

Correct Answer

A:

After implementation, the team should build SLM path checks into cross-pair migration procedures as the appropriate recurring safeguard against the identified issue. This result addresses the stated challenge at the Claremont municipal storage systems office.

Incorrect Answers

B:

“Monitor path state changes after storage failover and volume moves” checks a different ongoing risk rather than the reported failure: at the Claremont municipal storage systems office, a LUN migrates to another HA pair and clients lose access because expected new reporting paths were not prepared. The relevant mechanism is default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move; a passing acceptance check would show that a host IO test succeeds on the new optimized paths after the migration. The directly matched preventive control is “Build SLM path checks into cross-pair migration procedures”.

C:

The option would have the team review mount documentation and junction layout during reorganization. For this situation, the preventive control should instead be to build SLM path checks into cross-pair migration procedures. For the Claremont municipal storage systems office, the direct corrective action is to add or validate destination reporting nodes and update host MPIO path discovery before removing old paths.

D:

“Track identity mapping failures after directory changes” checks a different ongoing risk rather than the reported failure: at the Claremont municipal storage systems office, a LUN migrates to another HA pair and clients lose access because expected new reporting paths were not prepared. The relevant mechanism is default SLM reporting nodes are scoped to the owning pair and may change after a cross-pair move; a passing acceptance check would show that a host IO test succeeds on the new optimized paths after the migration. The directly matched preventive control is “Build SLM path checks into cross-pair migration procedures”.

Question 485

At the Redhaven hospital IT infrastructure group, a block host can reach the cluster management IP but cannot establish iSCSI sessions to data target addresses. Which solution most directly addresses the stated requirement?

  1. Inspect host MPIO session target LIF port and switch connectivity for the failed path
  2. Configure iSCSI discovery against reachable data LIFs on the intended SAN-enabled SVM
  3. Create or update the correct igroup with the authorized host initiator IQN or identifier
  4. Test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability

Explanation

Correct Answer

D:

For the Redhaven hospital IT infrastructure group, the appropriate correction is to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability. The decisive reason is that management connectivity says nothing about whether designated SAN targets are network-accessible; acceptance evidence is that an initiator establishes sessions on the intended data network and reads its mapped LUN.

Incorrect Answers

A:

The option addresses the separate situation where a healthy logical unit can still be unreachable over one independent transport path. For this case, the more appropriate response is to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability. For the Redhaven hospital IT infrastructure group, the direct corrective action is to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability.

B:

This focuses on san iscsi target discovery; it does not directly correct the condition that management connectivity says nothing about whether designated SAN targets are network-accessible. For the Redhaven hospital IT infrastructure group, the direct corrective action is to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability.

C:

Create or update the correct igroup with the authorized host initiator IQN or identifier can be useful for another workload, but it leaves the immediate failure unresolved. Here the priority is to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability. For the Redhaven hospital IT infrastructure group, the direct corrective action is to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability.

Question 486

At the Redhaven hospital IT infrastructure group, a block host can reach the cluster management IP but cannot establish iSCSI sessions to data target addresses. What underlying problem most directly explains the observed behavior?

  1. A missing fabric zone or initiator mapping can hide a LUN despite healthy shared storage
  2. Inconsistent owner-name translation can produce anonymous-looking ownership without changing actual stored data
  3. Management connectivity says nothing about whether designated SAN targets are network-accessible
  4. An online logical volume can be absent from the mounted NAS namespace

Explanation

Correct Answer

C:

The strongest explanation is that management connectivity says nothing about whether designated SAN targets are network-accessible. This accounts for the outcome and supports the action to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability. This result addresses the stated challenge at the Redhaven hospital IT infrastructure group.

Incorrect Answers

A:

The proposed cause is relevant to fc lun invisibility troubleshooting, but it does not explain why management connectivity says nothing about whether designated SAN targets are network-accessible in the reported case. For the Redhaven hospital IT infrastructure group, the direct corrective action is to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability.

B:

Inconsistent owner-name translation can produce anonymous-looking ownership without changing actual stored data. That is not the mechanism that accounts for the stated failure at the Redhaven hospital IT infrastructure group.

D:

Although an online logical volume can be absent from the mounted NAS namespace, the presented symptoms do not support that as the primary cause; they indicate that management connectivity says nothing about whether designated SAN targets are network-accessible. For the Redhaven hospital IT infrastructure group, the direct corrective action is to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability.

Question 487

At the Redhaven hospital IT infrastructure group, a block host can reach the cluster management IP but cannot establish iSCSI sessions to data target addresses. What evidence would justify marking this issue resolved?

  1. The registered IQN matches and the mapped LUN appears after rescan
  2. The intended host sees its LUN while an unrelated initiator has no access
  3. An initiator establishes sessions on the intended data network and reads its mapped LUN
  4. A controlled link failure preserves disk availability and host path status reflects expected optimization

Explanation

Correct Answer

C:

At the Redhaven hospital IT infrastructure group, evidence that an initiator establishes sessions on the intended data network and reads its mapped LUN directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

The alternative checks whether the registered IQN matches and the mapped LUN appears after rescan, which is not the direct acceptance criterion for the stated problem. The required result is that an initiator establishes sessions on the intended data network and reads its mapped LUN. For the Redhaven hospital IT infrastructure group, the direct corrective action is to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability.

B:

This result would validate initiator group iqn authorization, not the intended improvement. The needed observation is that an initiator establishes sessions on the intended data network and reads its mapped LUN. For the Redhaven hospital IT infrastructure group, the direct corrective action is to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability.

D:

Evidence that “A controlled link failure preserves disk availability and host path status reflects expected optimization” occurred would not by itself establish resolution of the reported problem: at the Redhaven hospital IT infrastructure group, a block host can reach the cluster management IP but cannot establish iSCSI sessions to data target addresses. The applicable verification is “An initiator establishes sessions on the intended data network and reads its mapped LUN”.

Question 488

At the Redhaven hospital IT infrastructure group, a block host can reach the cluster management IP but cannot establish iSCSI sessions to data target addresses. What follow-up practice would reduce this risk over time?

  1. Monitor path state changes after storage failover and volume moves
  2. Monitor SAN endpoint subnet and route changes
  3. Check NFSv4 identity mapping after domain configuration changes
  4. Review LUN mappings and remove obsolete initiators after decommissioning

Explanation

Correct Answer

B:

For the Redhaven hospital IT infrastructure group, this maintenance action preserves the fix: monitor SAN endpoint subnet and route changes. It should be revisited as the workload evolves.

Incorrect Answers

A:

The option would have the team monitor path state changes after storage failover and volume moves. For this situation, the preventive control should instead be to monitor SAN endpoint subnet and route changes. For the Redhaven hospital IT infrastructure group, the direct corrective action is to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability.

C:

That routine supports nfsv4 identity domain planning, but the relevant ongoing risk requires the team to monitor SAN endpoint subnet and route changes. For the Redhaven hospital IT infrastructure group, the direct corrective action is to test the host-to-SAN data VLAN route and LIF status rather than using cluster management reachability.

D:

“Review LUN mappings and remove obsolete initiators after decommissioning” checks a different ongoing risk rather than the reported failure: at the Redhaven hospital IT infrastructure group, a block host can reach the cluster management IP but cannot establish iSCSI sessions to data target addresses. The directly matched preventive control is “Monitor SAN endpoint subnet and route changes”.

Question 489

At the Dunbridge environmental data center, ONTAP reports the expected LUN mapping but a Linux host still shows its previous device inventory. Which design decision is the best response?

  1. Check ONTAP LUN and containing volume online state and mapping before changing switches
  2. Perform the supported host-side SCSI rescan and multipath refresh after verifying authorization
  3. Configure iSCSI discovery against reachable data LIFs on the intended SAN-enabled SVM
  4. Align supported NFSv4 identity domains and name services between client and ONTAP SVM

Explanation

Correct Answer

B:

For the Dunbridge environmental data center, the appropriate correction is to perform the supported host-side SCSI rescan and multipath refresh after verifying authorization. The decisive reason is that host kernels may need a discovery refresh after new target LUN mappings; acceptance evidence is that the refreshed host device list contains the expected stable LUN identity and size.

Incorrect Answers

A:

Check ONTAP LUN and containing volume online state and mapping before changing switches can be useful for another workload, but it leaves the immediate failure unresolved. Here the priority is to perform the supported host-side SCSI rescan and multipath refresh after verifying authorization. For the Dunbridge environmental data center, the direct corrective action is to perform the supported host-side SCSI rescan and multipath refresh after verifying authorization.

C:

This alternative would be suitable where a SAN initiator must discover actual iSCSI target endpoints before accessing mapped LUNs. It does not by itself resolve the need to perform the supported host-side SCSI rescan and multipath refresh after verifying authorization. For the Dunbridge environmental data center, the direct corrective action is to perform the supported host-side SCSI rescan and multipath refresh after verifying authorization.

D:

Align supported NFSv4 identity domains and name services between client and ONTAP SVM addresses a different kind of problem: nFSv4 owner strings require consistent name resolution and domain mapping. Here the reported weakness is that host kernels may need a discovery refresh after new target LUN mappings. For the Dunbridge environmental data center, the direct corrective action is to perform the supported host-side SCSI rescan and multipath refresh after verifying authorization.

Question 490

At the Dunbridge environmental data center, ONTAP reports the expected LUN mapping but a Linux host still shows its previous device inventory. Which explanation best accounts for the failure?

  1. Host kernels may need a discovery refresh after new target LUN mappings
  2. An igroup entry must match the active initiator identity used for block access
  3. Share permissions cannot fix authentication when the SVM cannot locate or authenticate against the directory
  4. NFSv4 owner strings require consistent name resolution and domain mapping

Explanation

Correct Answer

A:

The strongest explanation is that host kernels may need a discovery refresh after new target LUN mappings. This accounts for the outcome and supports the action to perform the supported host-side SCSI rescan and multipath refresh after verifying authorization. This result addresses the stated challenge at the Dunbridge environmental data center.

Incorrect Answers

B:

Although an igroup entry must match the active initiator identity used for block access, the presented symptoms do not support that as the primary cause; they indicate that host kernels may need a discovery refresh after new target LUN mappings. For the Dunbridge environmental data center, the direct corrective action is to perform the supported host-side SCSI rescan and multipath refresh after verifying authorization.

C:

“Share permissions cannot fix authentication when the SVM cannot locate or authenticate against the directory” is not the controlling explanation for at the Dunbridge environmental data center, ONTAP reports the expected LUN mapping but a Linux host still shows its previous device inventory. The matching answer is “Host kernels may need a discovery refresh after new target LUN mappings”.

D:

NFSv4 owner strings require consistent name resolution and domain mapping. That may occur elsewhere, but the evidence at the Dunbridge environmental data center instead points to the fact that host kernels may need a discovery refresh after new target LUN mappings.

NetApp Certified Data Administrator, ONTAP (NS0-165) Practice Tests