McAfee Secure

Cisco 200-301 Bundle

Exam Code: 200-301

Exam Name Cisco Certified Network Associate (CCNA)

Certification Provider: Cisco

Corresponding Certification: CCNA

Cisco 200-301 Bundle $44.99
200-301 Sample 1 200-301 Sample 2 200-301 Sample 3 200-301 Sample 4 200-301 Sample 5 200-301 Sample 6 200-301 Sample 7 200-301 Sample 8 200-301 Sample 9 200-301 Sample 10

100% Cisco 200-301 Guaranteed Success With Testking Training Materials

Get Real 200-301 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    200-301 Questions & Answers

    760 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 200-301 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 200-301 Video Course

    200-301 Training Course

    271 Video Lectures

    200-301 Video Course is developed by Cisco Professionals to help you pass the 200-301 exam.

    Description

    This course will improve your knowledge and skills required to pass Cisco Certified Network Associate (CCNA) exam.
  • Study Guide

    200-301 Study Guide

    1969 PDF Pages

    Developed by industry experts, this 1969-page guide spells out in painstaking detail all of the information you need to ace 200-301 exam.

Cisco Certified Network Associate (CCNA) (200-301) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $194.97
Bundle Price: $149.98

Purchase Individually

  • Questions & Answers

    Questions & Answers

    760 Questions

    $124.99
  • 200-301 Video Course

    Training Course

    271 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1969 PDF Pages

    $29.99

Cisco 200-301 Practice Test 78

Question 770

An acceptance check at Cedarline Hotels has two requirements: (1) support a remote site that cannot always reach the controller, and (2) separate finance endpoints from engineering devices at Layer 2. Which proposed plan satisfies both outcomes?

  1. First, consider FlexConnect operation on supported APs; then enable and inspect LLDP on the link.
  2. First, use a supported out-of-band console connection; then set the intended distribution switch's STP priority lower than competing bridges.
  3. First, consider FlexConnect operation on supported APs; then place access switchports in different VLANs.
  4. First, configure controller-supported link aggregation with the corresponding switch port-channel; then place access switchports in different VLANs.

Explanation

Correct Answer

C:

Both outcomes are covered: (1) FlexConnect supports selected local switching and local survivability behavior in branch deployments. (2) VLAN membership creates separate Layer 2 broadcast domains even on the same physical switch. Neither action is a substitute for the other.

Incorrect Answers

A:

The first step covers (1), but the second addresses advertise basic device identity to a multivendor adjacent device. LLDP is a vendor-neutral Layer 2 discovery protocol that advertises neighbor identity and capabilities. It leaves outcome (2) unfulfilled.

B:

Neither step is the requested pair: Use a supported out-of-band console connection is for manage a switch when its production network is unreachable, and Set the intended distribution switch's STP priority lower than competing bridges is for reduce the chance of an unintended access switch becoming STP root. A console provides local management access independent of in-band IP reachability. The proposed plan misses the two stated outcomes.

D:

The second step covers (2), but the first addresses aggregate WLC uplinks for bandwidth and resilience. A compatible aggregated uplink spreads supported traffic across multiple physical links. It leaves outcome (1) unfulfilled.

Question 771

At Copperline Studios, an engineer must explain why ordinary TFTP should not traverse an untrusted network. What action meets this technical need?

  1. Recognize Emergency as the most critical severity
  2. Use a bounded low-latency priority queue for the voice class
  3. Recognize TFTP lacks encryption and authentication
  4. Configure dynamic inside source NAT using the permitted ACL and address pool

Explanation

Correct Answer

C:

TFTP's simplicity leaves transfers exposed without a separate secure transport boundary. This is the control that implements the specified requirement.

Incorrect Answers

A:

Syslog severity values run from 0 Emergency to 7 Debugging. That is not sufficient here: TFTP's simplicity leaves transfers exposed without a separate secure transport boundary.

B:

Priority queuing reduces delay and jitter for latency-sensitive traffic if policed appropriately. That is not sufficient here: TFTP's simplicity leaves transfers exposed without a separate secure transport boundary.

D:

Dynamic NAT allocates eligible public addresses from a configured pool to matching inside hosts. That is not sufficient here: TFTP's simplicity leaves transfers exposed without a separate secure transport boundary.

Question 772

Switches on one Rapid PVST+ VLAN instance advertise these bridge IDs: SW-1 (priority 32768, MAC 8aacc9fd5d5e); SW-2 (priority 12288, MAC 82a324555e49); SW-3 (priority 28672, MAC 14268de09de2); SW-4 (priority 8192, MAC 4497caf86256). They are powered on with no previous root. Which switch is the elected root?

  1. SW-3 (priority 28672, MAC 14268de09de2)
  2. SW-1 (priority 32768, MAC 8aacc9fd5d5e)
  3. SW-4 (priority 8192, MAC 4497caf86256)
  4. SW-2 (priority 12288, MAC 82a324555e49)

Explanation

Correct Answer

C:

The STP root is the switch with the numerically lowest bridge ID: priority is compared first, followed by MAC on ties. SW-4 has the lowest priority 8192.

Incorrect Answers

A:

Its advertised priority is greater than the winner 8192, and no tie breaker changes the result.

B:

That explanation does not distinguish this option. “SW-1 (priority 32768, MAC 8aacc9fd5d5e)” is an alternative action, but it does not by itself establish the outcome required in this case.

D:

That explanation does not distinguish this option. “SW-2 (priority 12288, MAC 82a324555e49)” is an alternative action, but it does not by itself establish the outcome required in this case.

Question 773

An acceptance check at Greenfield Services has two requirements: (1) route several VLANs using one router physical uplink, and (2) discover a neighboring Cisco switch's device name and management address. Which option addresses both requirements?

  1. First, run show vlan brief on the access switch; then use a supported out-of-band console connection.
  2. First, configure 802.1Q router subinterfaces with VLAN tags and gateway addresses; then inspect show cdp neighbors detail on an enabled link.
  3. First, set the opposite peer to LACP active; then inspect show cdp neighbors detail on an enabled link.
  4. First, configure 802.1Q router subinterfaces with VLAN tags and gateway addresses; then recognize the 802.1Q VLAN ID in tagged Ethernet frames.

Explanation

Correct Answer

B:

Both outcomes are covered: (1) Router-on-a-stick separates VLAN traffic by subinterface over one physical trunk. (2) CDP exchanges Cisco neighbor information at Layer 2, including platform and management identifiers. Neither action is a substitute for the other.

Incorrect Answers

A:

Neither step is the requested pair: Run show vlan brief on the access switch is for verify that a desktop interface belongs to the intended VLAN, and Use a supported out-of-band console connection is for manage a switch when its production network is unreachable. The VLAN table lists local VLAN membership for access ports and available VLAN identifiers. The proposed plan misses the two stated outcomes.

C:

The second step covers (2), but the first addresses form an LACP channel where one side is passive. Passive/ passive cannot initiate an LACP exchange, while an active side can negotiate with passive. It leaves outcome (1) unfulfilled.

D:

The first step covers (1), but the second addresses distinguish tagged VLAN 30 traffic from untagged native VLAN traffic on an 802.1Q trunk. The VLAN identifier in the 802.1Q header preserves VLAN separation across shared trunks. It leaves outcome (2) unfulfilled.

Question 774

An operations ticket for Orion Shipping has two requirements: (1) centrally manage radio settings of lightweight campus APs, and (2) support a remote site that cannot always reach the controller. Which proposed plan satisfies both outcomes?

  1. First, run show vlan brief on the access switch; then configure spanning-tree portfast on a true endpoint-facing access port.
  2. First, use a controller-based WLAN architecture; then consider FlexConnect operation on supported APs.
  3. First, use a controller-based WLAN architecture; then enable and inspect LLDP on the link.
  4. First, configure VLAN SVIs with IP addresses and enable ip routing; then consider FlexConnect operation on supported APs.

Explanation

Correct Answer

B:

Both outcomes are covered: (1) Lightweight APs and a controller separate centralized policy/control from radio client access. (2) FlexConnect supports selected local switching and local survivability behavior in branch deployments. Neither action is a substitute for the other.

Incorrect Answers

A:

Neither step is the requested pair: Run show vlan brief on the access switch is for verify that a desktop interface belongs to the intended VLAN, and Configure spanning-tree portfast on a true endpoint-facing access port is for enable rapid host access without waiting for ordinary STP transitions. The VLAN table lists local VLAN membership for access ports and available VLAN identifiers. The proposed plan misses the two stated outcomes.

C:

The first step covers (1), but the second addresses advertise basic device identity to a multivendor adjacent device. LLDP is a vendor-neutral Layer 2 discovery protocol that advertises neighbor identity and capabilities. It leaves outcome (2) unfulfilled.

D:

The second step covers (2), but the first addresses route between VLAN 10 and VLAN 20 using a multilayer switch. Layer 3 forwarding across VLANs requires an active routed interface for each subnet. It leaves outcome (1) unfulfilled.

Question 775

A branch design for Baypoint Retail has two requirements: (1) choose a VPN topology for dozens of branches connecting two headquarters networks, and (2) protect a Wi-Fi network using AES-CCMP and a shared passphrase. Which option meets both stated needs?

  1. First, apply ip access-group ACLNAME in on the selected interface; then use WPA2-Personal where the WLAN/client support it.
  2. First, use controlled site-to-site IPsec gateway tunnels; then add an explicit permit for eligible remaining traffic.
  3. First, use authorization policies for the requested action; then use DHCP snooping on the client VLAN.
  4. First, use controlled site-to-site IPsec gateway tunnels; then use WPA2-Personal where the WLAN/client support it.

Explanation

Correct Answer

D:

Both outcomes are covered: (1) Gateway-to-gateway VPNs connect entire protected subnets without requiring each host a remote-access client. (2) WPA2 uses robust AES-based link protection in common personal-mode deployments. Neither action is a substitute for the other.

Incorrect Answers

A:

The second step covers (2), but the first addresses attach an IPv4 ACL to traffic entering an interface. The in direction checks arriving packets before routed forwarding toward their destination. It leaves outcome (1) unfulfilled.

B:

The first step covers (1), but the second addresses allow the rest of an ACL's traffic after a specific deny. Without a final permit, the implicit deny blocks traffic not otherwise matched. It leaves outcome (2) unfulfilled.

C:

Neither step is the requested pair: Use authorization policies for the requested action is for decide whether an authenticated user may issue a privileged configuration command, and Use DHCP snooping on the client VLAN is for build an authoritative IP-to-MAC-to-port binding table from legitimate DHCP leases. Authorization grants or denies specific operations after identity is established. The proposed plan misses the two stated outcomes.

Question 776

A network upgrade at Stonebridge Learning has two requirements: (1) handle a broadcast Ethernet frame on an access VLAN, and (2) verify that an IPv6 interface has a link-local address. Which plan correctly handles both requirements?

  1. First, insert FFFE and invert the universal/local bit at the defined location; then inspect show ipv6 interface for the FE80::/10 link-local address.
  2. First, flood it through forwarding ports belonging to that broadcast domain; then use a router with interfaces or subinterfaces in both routed networks.
  3. First, flood it through forwarding ports belonging to that broadcast domain; then inspect show ipv6 interface for the FE80::/10 link-local address.
  4. First, allocate a unique /64 subnet within the /48 block; then use a hypervisor hosting separate virtual machines.

Explanation

Correct Answer

C:

Both outcomes are covered: (1) Layer 2 broadcast is delivered throughout the VLAN unless a boundary or feature blocks forwarding. (2) Link-local addresses are used for on-link neighbor discovery and routing adjacencies. Neither action is a substitute for the other.

Incorrect Answers

A:

The second step covers (2), but the first addresses form a modified EUI-64 interface identifier from a 48-bit MAC. Modified EUI-64 expands the 48-bit MAC and flips the U/L bit to form a 64-bit identifier. It leaves outcome (1) unfulfilled.

B:

The first step covers (1), but the second addresses connect two IP subnets and forward packets between them. Routing selects a next hop from a destination IP prefix instead of forwarding solely by MAC address. It leaves outcome (2) unfulfilled.

D:

Neither step is the requested pair: Allocate a unique /64 subnet within the /48 block is for derive an IPv6 subnet prefix from a /48 allocation for a single LAN, and Use a hypervisor hosting separate virtual machines is for run isolated guest operating systems on shared physical hardware. A /48 leaves 16 subnet ID bits for up to 65,536 conventional /64 networks. The proposed plan misses the two stated outcomes.

Question 777

At Riverside Data, an engineer must prevent a downstream switch from claiming the root role over an uplink. What action meets this technical need?

  1. Treat CDP and LLDP neighbors as directly connected Layer 2 evidence
  2. Configure VLAN SVIs with IP addresses and enable ip routing
  3. Enable Root Guard on the intended designated port
  4. Configure an appropriate WPA2/WPA3-Enterprise WLAN with RADIUS

Explanation

Correct Answer

C:

Root Guard holds the port in a root-inconsistent state if superior BPDUs arrive. This is the control that implements the specified requirement.

Incorrect Answers

A:

Discovery advertisements do not prove that an IP route exists or that remote hosts are reachable. That is not sufficient here: Root Guard holds the port in a root-inconsistent state if superior BPDUs arrive.

B:

Layer 3 forwarding across VLANs requires an active routed interface for each subnet. That is not sufficient here: Root Guard holds the port in a root-inconsistent state if superior BPDUs arrive.

D:

Enterprise WLAN security uses 802.1X/EAP against an authentication server. That is not sufficient here: Root Guard holds the port in a root-inconsistent state if superior BPDUs arrive.

Question 778

On a Cisco IOS trunk, `show interfaces trunk` confirms that VLANs 10 and 20 are permitted and forwarding. A change request adds VLAN 30 to the permitted list while preserving the two existing production VLANs. Which interface command makes the additive change?

  1. `switchport trunk allowed vlan 30`
  2. `switchport access vlan 30`
  3. `switchport trunk native vlan 30`
  4. `switchport trunk allowed vlan add 30`

Explanation

Correct Answer

D:

The `add` keyword extends the current allowed-VLAN set; it does not overwrite the required existing VLANs 10 and 20.

Incorrect Answers

A:

Without `add`, this command replaces the allowed-VLAN set with VLAN 30 and disrupts the two existing VLANs.

B:

This configures an access VLAN for an access-mode port, not an additive allowed-VLAN change on the trunk.

C:

This changes how untagged traffic is classified but does not extend the permitted VLAN list.

Question 779

During a review, the administrator for Riverside Data is asked to interpret a successful REST resource creation response. Which approach satisfies the precise requirement?

  1. Distinguish distributed device data planes from centralized management/control functions
  2. Send an authenticated HTTP GET to the resource URI
  3. Separate property pairs with commas and quote property names
  4. Recognize HTTP status 201 Created where the API follows that convention

Explanation

Correct Answer

D:

HTTP 201 indicates a resource was created, often with a Location header. This is the control that implements the specified requirement.

Incorrect Answers

A:

Depending on architecture, devices can continue forwarding installed state when the controller is unreachable. That is not sufficient here: HTTP 201 indicates a resource was created, often with a Location header.

B:

GET retrieves the representation of a resource without intending to create it. That is not sufficient here: HTTP 201 indicates a resource was created, often with a Location header.

C:

JSON object syntax requires comma-separated key/value pairs and double-quoted keys. That is not sufficient here: HTTP 201 indicates a resource was created, often with a Location header.

Question 780

During a review, the administrator for Eastbrook Labs is asked to resolve a client configured with an incorrect DNS server despite a valid IP lease. Which approach satisfies the precise requirement?

  1. Check whether mappings preserve one fixed global per local host or reuse ports
  2. Recognize Debugging as the least severe standard level
  3. Correct the DHCP DNS option or local resolver setting
  4. Test IP reachability and file path permissions first

Explanation

Correct Answer

C:

IP connectivity can work while name resolution fails because resolver configuration is wrong. This is the control that implements the specified requirement.

Incorrect Answers

A:

Static mapping binds an address, while overload multiplexes sessions through port translation. That is not sufficient here: IP connectivity can work while name resolution fails because resolver configuration is wrong.

B:

Numeric severity 7 contains debug-level diagnostic detail below informational messages. That is not sufficient here: IP connectivity can work while name resolution fails because resolver configuration is wrong.

D:

TFTP requires UDP reachability and server-side access to the intended file path. That is not sufficient here: IP connectivity can work while name resolution fails because resolver configuration is wrong.