McAfee Secure

Cisco 350-501 Bundle

Exam Code: 350-501

Exam Name Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Service Provider , CCNP Service Provider

Cisco 350-501 Bundle $28.79

100% Cisco 350-501 Guaranteed Success With Testking Training Materials

Get Real 350-501 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-501 Questions & Answers

    528 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-501 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-501 Video Course

    350-501 Training Course

    253 Video Lectures

    350-501 Video Course is developed by Cisco Professionals to help you pass the 350-501 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) exam.
  • Study Guide

    350-501 Study Guide

    1160 PDF Pages

    Developed by industry experts, this 1160-page guide spells out in painstaking detail all of the information you need to ace 350-501 exam.

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $189.97
Bundle Price: $161.18

Purchase Individually

  • Questions & Answers

    Questions & Answers

    528 Questions

    $124.99
  • 350-501 Video Course

    Training Course

    253 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1160 PDF Pages

    $24.99

Cisco 350-501 Practice Test 13

Question 120

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A provider sees IS-IS adjacency churn when the neighbor has a different Level-1 area assignment despite matching link reachability. Which continuing control best reduces recurrence of this problem?

  1. Include link MTU compatibility in OSPF turn-up validation.
  2. Include L1/L2 area and authentication checks in adjacency runbooks.
  3. Check NAT ACL scope and translation table exhaustion under load.
  4. Test stale-route timer expiry and unsupported-peer behavior before relying on graceful restart.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A provider sees IS-IS adjacency churn when the neighbor has a different Level-1 area assignment despite matching link reachability. The most directly supported response is: Check neighbor level, area identity, authentication, and circuit parameters rather than only ping. Technical basis: Level-1 IS-IS neighbors require compatible area membership, while L2 behavior differs. Evidence of success: Both routers maintain a stable intended Level-1 adjacency with matching area parameters. Ongoing protection: Include L1/L2 area and authentication checks in adjacency runbooks.

Incorrect Answers

A:

OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. Maintaining that control would not track the failure described here. The relevant risk is: Level-1 IS-IS neighbors require compatible area membership, while L2 behavior differs. Review this instead: Include L1/L2 area and authentication checks in adjacency runbooks.

C:

NAT44 rewrites IPv4 addressing across a defined inside and outside interface boundary. Maintaining that control would not track the failure described here. The relevant risk is: Level-1 IS-IS neighbors require compatible area membership, while L2 behavior differs. Review this instead: Include L1/L2 area and authentication checks in adjacency runbooks.

D:

The alternative guards against: Graceful restart can preserve routing information temporarily while a control plane reconverges. The root condition for this case is: Level-1 IS-IS neighbors require compatible area membership, while L2 behavior differs. The focused prevention check is: Include L1/L2 area and authentication checks in adjacency runbooks.

Question 121

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A dual-stack IS-IS backbone must keep IPv6 topology decisions independent because two intermediate routers do not support IPv6 forwarding. What is the best authorized corrective or investigative action for this service-provider network operations situation?

  1. Review BGP best-path attributes in their selection order, starting with locally relevant preference settings.
  2. Use an IPv6 multitopology design where supported to avoid selecting IPv4-only transit devices.
  3. Constrain the prefix-set using the permitted mask-length range and documented exceptions.
  4. Align supported member speed, duplex, LACP parameters and hash behavior for the bundle.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A dual-stack IS-IS backbone must keep IPv6 topology decisions independent because two intermediate routers do not support IPv6 forwarding. The most directly supported response is: Use an IPv6 multitopology design where supported to avoid selecting IPv4-only transit devices. Technical basis: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. Evidence of success: The IPv6 SPF tree excludes nodes without the relevant IPv6 forwarding capability. Ongoing protection: Check IPv6 capability flags before introducing new transit nodes.

Incorrect Answers

A:

The proposed option addresses this separate mechanism: BGP best-path choice is policy-driven and does not simply select the fewest physical hops. The stated problem instead depends on: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. The required response is: Use an IPv6 multitopology design where supported to avoid selecting IPv4-only transit devices.

C:

The option fits a control for: Prefix-set ge and le bounds determine which subnet lengths a policy can match. The present failure is caused by a different mechanism: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. The targeted implementation is: Use an IPv6 multitopology design where supported to avoid selecting IPv4-only transit devices.

D:

The option fits a control for: Link aggregation combines compatible physical members into one logical forwarding interface. The present failure is caused by a different mechanism: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. The targeted implementation is: Use an IPv6 multitopology design where supported to avoid selecting IPv4-only transit devices.

Question 122

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A dual-stack IS-IS backbone must keep IPv6 topology decisions independent because two intermediate routers do not support IPv6 forwarding. Which observable result most directly verifies that this network issue was resolved?

  1. The port-channel reaches the intended member count and distributes eligible flows without errors.
  2. The IPv6 SPF tree excludes nodes without the relevant IPv6 forwarding capability.
  3. The Hello neighbor field becomes reciprocal and the adjacency advances from INIT.
  4. The operator can identify whether policy, reachability, or administrative preference blocked installation.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A dual-stack IS-IS backbone must keep IPv6 topology decisions independent because two intermediate routers do not support IPv6 forwarding. The most directly supported response is: Use an IPv6 multitopology design where supported to avoid selecting IPv4-only transit devices. Technical basis: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. Evidence of success: The IPv6 SPF tree excludes nodes without the relevant IPv6 forwarding capability. Ongoing protection: Check IPv6 capability flags before introducing new transit nodes.

Incorrect Answers

A:

Link aggregation combines compatible physical members into one logical forwarding interface. Evidence of that behavior would not establish the required outcome here. The case-specific failure is: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. A passing check should show: The IPv6 SPF tree excludes nodes without the relevant IPv6 forwarding capability.

C:

The proposed test would be relevant to: OSPF INIT indicates a one-way neighbor relationship rather than full bidirectional discovery. The reported problem follows from: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. Instead, verify: The IPv6 SPF tree excludes nodes without the relevant IPv6 forwarding capability.

D:

The proposed test would be relevant to: Reception of BGP NLRI does not necessarily imply RIB or FIB installation. The reported problem follows from: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. Instead, verify: The IPv6 SPF tree excludes nodes without the relevant IPv6 forwarding capability.

Question 123

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A dual-stack IS-IS backbone must keep IPv6 topology decisions independent because two intermediate routers do not support IPv6 forwarding. Which underlying network infrastructure principle best explains the situation?

  1. Route maps express ordered match-and-set conditions whose scope determines policy side effects.
  2. BGP PIC precomputes viable alternate paths to reduce route-by-route failover delay.
  3. BFD can trigger routing adjacency teardown faster than protocol-native hold timers.
  4. IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies.

Explanation

Correct Answer

D:

For this scenario, the observed situation is: A dual-stack IS-IS backbone must keep IPv6 topology decisions independent because two intermediate routers do not support IPv6 forwarding. The most directly supported response is: Use an IPv6 multitopology design where supported to avoid selecting IPv4-only transit devices. Technical basis: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. Evidence of success: The IPv6 SPF tree excludes nodes without the relevant IPv6 forwarding capability. Ongoing protection: Check IPv6 capability flags before introducing new transit nodes.

Incorrect Answers

A:

The option explains a separate issue: Route maps express ordered match-and-set conditions whose scope determines policy side effects. The reported condition instead follows from: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies.

B:

The option explains a separate issue: BGP PIC precomputes viable alternate paths to reduce route-by-route failover delay. The reported condition instead follows from: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies.

C:

The option explains a separate issue: BFD can trigger routing adjacency teardown faster than protocol-native hold timers. The reported condition instead follows from: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies.

Question 124

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A dual-stack IS-IS backbone must keep IPv6 topology decisions independent because two intermediate routers do not support IPv6 forwarding. Which continuing control best reduces recurrence of this problem?

  1. Run TCP session tests whenever peering ACLs are changed.
  2. Balance BFD scale and jitter tolerance against strict convergence targets.
  3. Check NAT ACL scope and translation table exhaustion under load.
  4. Check IPv6 capability flags before introducing new transit nodes.

Explanation

Correct Answer

D:

For this scenario, the observed situation is: A dual-stack IS-IS backbone must keep IPv6 topology decisions independent because two intermediate routers do not support IPv6 forwarding. The most directly supported response is: Use an IPv6 multitopology design where supported to avoid selecting IPv4-only transit devices. Technical basis: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. Evidence of success: The IPv6 SPF tree excludes nodes without the relevant IPv6 forwarding capability. Ongoing protection: Check IPv6 capability flags before introducing new transit nodes.

Incorrect Answers

A:

The alternative guards against: BGP requires a successful TCP session before exchanging UPDATE messages. The root condition for this case is: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. The focused prevention check is: Check IPv6 capability flags before introducing new transit nodes.

B:

The alternative guards against: BFD supplies fast bidirectional failure detection independently of slower protocol hello timers. The root condition for this case is: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. The focused prevention check is: Check IPv6 capability flags before introducing new transit nodes.

C:

The alternative guards against: NAT44 rewrites IPv4 addressing across a defined inside and outside interface boundary. The root condition for this case is: IS-IS multitopology can maintain separate route calculations for distinct supported protocol topologies. The focused prevention check is: Check IPv6 capability flags before introducing new transit nodes.

Question 125

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: Two IS-IS routers exchange hellos, but one advertises a maximum metric after entering maintenance. What is the best authorized corrective or investigative action for this service-provider network operations situation?

  1. Enable and verify supported BGP graceful restart behavior and independent next-hop recovery constraints.
  2. Enable the correct MP-BGP VPN address family on authorized sessions and preserve service attributes.
  3. Check IS-IS IPv6 topology advertisements, supported AF configuration, and next-hop calculation.
  4. Investigate the configured overload or high-metric maintenance state before changing physical cabling.

Explanation

Correct Answer

D:

For this scenario, the observed situation is: Two IS-IS routers exchange hellos, but one advertises a maximum metric after entering maintenance. The most directly supported response is: Investigate the configured overload or high-metric maintenance state before changing physical cabling. Technical basis: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. Evidence of success: The router remains adjacent but normal transit paths avoid it until maintenance state clears. Ongoing protection: Require documented timers and post-maintenance overload-state verification.

Incorrect Answers

A:

The option fits a control for: Graceful restart can preserve routing information temporarily while a control plane reconverges. The present failure is caused by a different mechanism: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. The targeted implementation is: Investigate the configured overload or high-metric maintenance state before changing physical cabling.

B:

The option fits a control for: BGP address families carry different kinds of NLRI and require explicit peer activation. The present failure is caused by a different mechanism: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. The targeted implementation is: Investigate the configured overload or high-metric maintenance state before changing physical cabling.

C:

A live IS-IS adjacency does not guarantee all address-family reachability is exchanged. That principle governs the alternative intervention. The issue described here is different: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. The case-matched corrective action is: Investigate the configured overload or high-metric maintenance state before changing physical cabling.

Question 126

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: Two IS-IS routers exchange hellos, but one advertises a maximum metric after entering maintenance. Which observable result most directly verifies that this network issue was resolved?

  1. A controlled primary failure switches eligible traffic to the prepared backup within the objective.
  2. The winning route follows the configured best-path algorithm with origin type considered at its proper stage.
  3. The router remains adjacent but normal transit paths avoid it until maintenance state clears.
  4. The BFD session remains stable at a supported detection setting and BGP no longer flaps.

Explanation

Correct Answer

C:

For this scenario, the observed situation is: Two IS-IS routers exchange hellos, but one advertises a maximum metric after entering maintenance. The most directly supported response is: Investigate the configured overload or high-metric maintenance state before changing physical cabling. Technical basis: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. Evidence of success: The router remains adjacent but normal transit paths avoid it until maintenance state clears. Ongoing protection: Require documented timers and post-maintenance overload-state verification.

Incorrect Answers

A:

The proposed test would be relevant to: BGP Add-Paths and PIC address different multipath signaling and precomputed backup forwarding aspects. The reported problem follows from: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. Instead, verify: The router remains adjacent but normal transit paths avoid it until maintenance state clears.

B:

That observation tests a different mechanism: BGP origin is one of several ordered best-path criteria, not a universal primary selector. It cannot establish this case, whose mechanism is: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. The needed verification is: The router remains adjacent but normal transit paths avoid it until maintenance state clears.

D:

That observation tests a different mechanism: BFD can trigger routing adjacency teardown faster than protocol-native hold timers. It cannot establish this case, whose mechanism is: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. The needed verification is: The router remains adjacent but normal transit paths avoid it until maintenance state clears.

Question 127

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: Two IS-IS routers exchange hellos, but one advertises a maximum metric after entering maintenance. Which underlying network infrastructure principle best explains the situation?

  1. IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency.
  2. Reception of BGP NLRI does not necessarily imply RIB or FIB installation.
  3. BGP routing policy controls prefix acceptance, while forwarding uses the most specific installed route.
  4. OSPF default cost calculations can lose resolution when link speeds exceed the reference bandwidth.

Explanation

Correct Answer

A:

For this scenario, the observed situation is: Two IS-IS routers exchange hellos, but one advertises a maximum metric after entering maintenance. The most directly supported response is: Investigate the configured overload or high-metric maintenance state before changing physical cabling. Technical basis: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. Evidence of success: The router remains adjacent but normal transit paths avoid it until maintenance state clears. Ongoing protection: Require documented timers and post-maintenance overload-state verification.

Incorrect Answers

B:

The alternative principle describes: Reception of BGP NLRI does not necessarily imply RIB or FIB installation. In this question, the decisive mechanism is: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. These are distinct technical causes, even when they share a platform.

C:

The alternative principle describes: BGP routing policy controls prefix acceptance, while forwarding uses the most specific installed route. In this question, the decisive mechanism is: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. These are distinct technical causes, even when they share a platform.

D:

The alternative principle describes: OSPF default cost calculations can lose resolution when link speeds exceed the reference bandwidth. In this question, the decisive mechanism is: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. These are distinct technical causes, even when they share a platform.

Question 128

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: Two IS-IS routers exchange hellos, but one advertises a maximum metric after entering maintenance. Which continuing control best reduces recurrence of this problem?

  1. Run end-to-end failure injection that includes upstream link and backend loss.
  2. Review best-path debug evidence before tuning otherwise irrelevant attributes.
  3. Monitor unresolved next-hop counters following transport topology changes.
  4. Require documented timers and post-maintenance overload-state verification.

Explanation

Correct Answer

D:

For this scenario, the observed situation is: Two IS-IS routers exchange hellos, but one advertises a maximum metric after entering maintenance. The most directly supported response is: Investigate the configured overload or high-metric maintenance state before changing physical cabling. Technical basis: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. Evidence of success: The router remains adjacent but normal transit paths avoid it until maintenance state clears. Ongoing protection: Require documented timers and post-maintenance overload-state verification.

Incorrect Answers

A:

That recurring practice manages a separate exposure: High availability requires validating application-relevant reachability rather than only local link carrier state. The present case instead depends on: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. The suitable ongoing safeguard is: Require documented timers and post-maintenance overload-state verification.

B:

That recurring practice manages a separate exposure: BGP origin is one of several ordered best-path criteria, not a universal primary selector. The present case instead depends on: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. The suitable ongoing safeguard is: Require documented timers and post-maintenance overload-state verification.

C:

That recurring practice manages a separate exposure: BGP paths require resolvable next-hop reachability before installation and forwarding. The present case instead depends on: IS-IS overload and high-cost advertisement can drain transit traffic without tearing down every adjacency. The suitable ongoing safeguard is: Require documented timers and post-maintenance overload-state verification.

Question 129

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A new peering site floods too many external routes into a provider IS-IS area and destabilizes internal shortest-path calculations. What is the best authorized corrective or investigative action for this service-provider network operations situation?

  1. Translate the intent into supported IOS XR RPL constructs and check resulting actions.
  2. Keep external interdomain routes under controlled redistribution with explicit prefix and metric policy.
  3. Validate the platform's NSR or high-availability capabilities and forwarding continuity under a controlled RP failover.
  4. Restore reachable BGP next-hop resolution through the intended IGP or supported next-hop policy.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A new peering site floods too many external routes into a provider IS-IS area and destabilizes internal shortest-path calculations. The most directly supported response is: Keep external interdomain routes under controlled redistribution with explicit prefix and metric policy. Technical basis: Unbounded redistribution expands IGP state and can affect convergence and resource use. Evidence of success: The link-state database contains only approved redistributed routes and stable internal paths. Ongoing protection: Review redistribution policy and route limits after adding external peers.

Incorrect Answers

A:

Cisco route-policy languages differ across operating systems and cannot always be pasted interchangeably. That principle governs the alternative intervention. The issue described here is different: Unbounded redistribution expands IGP state and can affect convergence and resource use. The case-matched corrective action is: Keep external interdomain routes under controlled redistribution with explicit prefix and metric policy.

C:

The proposed option addresses this separate mechanism: NSR maintains routing protocol state on redundant controllers and differs from neighbor-assisted graceful restart. The stated problem instead depends on: Unbounded redistribution expands IGP state and can affect convergence and resource use. The required response is: Keep external interdomain routes under controlled redistribution with explicit prefix and metric policy.

D:

The proposed option addresses this separate mechanism: BGP paths require resolvable next-hop reachability before installation and forwarding. The stated problem instead depends on: Unbounded redistribution expands IGP state and can affect convergence and resource use. The required response is: Keep external interdomain routes under controlled redistribution with explicit prefix and metric policy.

Question 130

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A new peering site floods too many external routes into a provider IS-IS area and destabilizes internal shortest-path calculations. Which observable result most directly verifies that this network issue was resolved?

  1. The shortest-path tree reflects the intended relative capacity of 10G and 100G links.
  2. The link-state database contains only approved redistributed routes and stable internal paths.
  3. IPv6 prefixes appear in the intended database and routing table after AF correction.
  4. Only approved IGP routes appear as BGP advertisements and their attributes meet policy.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A new peering site floods too many external routes into a provider IS-IS area and destabilizes internal shortest-path calculations. The most directly supported response is: Keep external interdomain routes under controlled redistribution with explicit prefix and metric policy. Technical basis: Unbounded redistribution expands IGP state and can affect convergence and resource use. Evidence of success: The link-state database contains only approved redistributed routes and stable internal paths. Ongoing protection: Review redistribution policy and route limits after adding external peers.

Incorrect Answers

A:

That observation tests a different mechanism: OSPF default cost calculations can lose resolution when link speeds exceed the reference bandwidth. It cannot establish this case, whose mechanism is: Unbounded redistribution expands IGP state and can affect convergence and resource use. The needed verification is: The link-state database contains only approved redistributed routes and stable internal paths.

C:

A live IS-IS adjacency does not guarantee all address-family reachability is exchanged. Evidence of that behavior would not establish the required outcome here. The case-specific failure is: Unbounded redistribution expands IGP state and can affect convergence and resource use. A passing check should show: The link-state database contains only approved redistributed routes and stable internal paths.

D:

Redistribution connects control-plane domains and can leak unintended reachability if unfiltered. Evidence of that behavior would not establish the required outcome here. The case-specific failure is: Unbounded redistribution expands IGP state and can affect convergence and resource use. A passing check should show: The link-state database contains only approved redistributed routes and stable internal paths.