McAfee Secure

Cisco 350-501 Bundle

Exam Code: 350-501

Exam Name Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR)

Certification Provider: Cisco

Corresponding Certifications: CCIE Service Provider , CCNP Service Provider

Cisco 350-501 Bundle $28.79

100% Cisco 350-501 Guaranteed Success With Testking Training Materials

Get Real 350-501 Exam Questions & Expert Verified Answers as Experienced on the Real Exam!

  • Questions & Answers

    350-501 Questions & Answers

    528 Questions & Answers

    The ultimate exam preparation tool, Questions & Answers mirrors the actual 350-501 exam while allowing you to hone and measure every aspect of your test-taking ability.

  • 350-501 Video Course

    350-501 Training Course

    253 Video Lectures

    350-501 Video Course is developed by Cisco Professionals to help you pass the 350-501 exam.

    Description

    This course will improve your knowledge and skills required to pass Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) exam.
  • Study Guide

    350-501 Study Guide

    1160 PDF Pages

    Developed by industry experts, this 1160-page guide spells out in painstaking detail all of the information you need to ace 350-501 exam.

Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) (350-501) Practice Tests

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Total Cost: $189.97
Bundle Price: $161.18

Purchase Individually

  • Questions & Answers

    Questions & Answers

    528 Questions

    $124.99
  • 350-501 Video Course

    Training Course

    253 Video Lectures

    $39.99
  • Study Guide

    Study Guide

    1160 PDF Pages

    $24.99

Cisco 350-501 Practice Test 14

Question 130

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A new peering site floods too many external routes into a provider IS-IS area and destabilizes internal shortest-path calculations. Which observable result most directly verifies that this network issue was resolved?

  1. The shortest-path tree reflects the intended relative capacity of 10G and 100G links.
  2. The link-state database contains only approved redistributed routes and stable internal paths.
  3. IPv6 prefixes appear in the intended database and routing table after AF correction.
  4. Only approved IGP routes appear as BGP advertisements and their attributes meet policy.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A new peering site floods too many external routes into a provider IS-IS area and destabilizes internal shortest-path calculations. The most directly supported response is: Keep external interdomain routes under controlled redistribution with explicit prefix and metric policy. Technical basis: Unbounded redistribution expands IGP state and can affect convergence and resource use. Evidence of success: The link-state database contains only approved redistributed routes and stable internal paths. Ongoing protection: Review redistribution policy and route limits after adding external peers.

Incorrect Answers

A:

That observation tests a different mechanism: OSPF default cost calculations can lose resolution when link speeds exceed the reference bandwidth. It cannot establish this case, whose mechanism is: Unbounded redistribution expands IGP state and can affect convergence and resource use. The needed verification is: The link-state database contains only approved redistributed routes and stable internal paths.

C:

A live IS-IS adjacency does not guarantee all address-family reachability is exchanged. Evidence of that behavior would not establish the required outcome here. The case-specific failure is: Unbounded redistribution expands IGP state and can affect convergence and resource use. A passing check should show: The link-state database contains only approved redistributed routes and stable internal paths.

D:

Redistribution connects control-plane domains and can leak unintended reachability if unfiltered. Evidence of that behavior would not establish the required outcome here. The case-specific failure is: Unbounded redistribution expands IGP state and can affect convergence and resource use. A passing check should show: The link-state database contains only approved redistributed routes and stable internal paths.

Question 131

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A new peering site floods too many external routes into a provider IS-IS area and destabilizes internal shortest-path calculations. Which underlying network infrastructure principle best explains the situation?

  1. Cisco route-policy languages differ across operating systems and cannot always be pasted interchangeably.
  2. OSPF area types determine which external and summary LSAs may be flooded.
  3. BGP may retain several path candidates while selecting a subset for best-path and forwarding use.
  4. Unbounded redistribution expands IGP state and can affect convergence and resource use.

Explanation

Correct Answer

D:

For this scenario, the observed situation is: A new peering site floods too many external routes into a provider IS-IS area and destabilizes internal shortest-path calculations. The most directly supported response is: Keep external interdomain routes under controlled redistribution with explicit prefix and metric policy. Technical basis: Unbounded redistribution expands IGP state and can affect convergence and resource use. Evidence of success: The link-state database contains only approved redistributed routes and stable internal paths. Ongoing protection: Review redistribution policy and route limits after adding external peers.

Incorrect Answers

A:

Cisco route-policy languages differ across operating systems and cannot always be pasted interchangeably. That is not the causal relationship tested by the current facts. The relevant principle is: Unbounded redistribution expands IGP state and can affect convergence and resource use.

B:

OSPF area types determine which external and summary LSAs may be flooded. That is not the causal relationship tested by the current facts. The relevant principle is: Unbounded redistribution expands IGP state and can affect convergence and resource use.

C:

BGP may retain several path candidates while selecting a subset for best-path and forwarding use. That is not the causal relationship tested by the current facts. The relevant principle is: Unbounded redistribution expands IGP state and can affect convergence and resource use.

Question 132

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A new peering site floods too many external routes into a provider IS-IS area and destabilizes internal shortest-path calculations. Which continuing control best reduces recurrence of this problem?

  1. Tag and filter redistributed routes to prevent reciprocal injection.
  2. Review redistribution policy and route limits after adding external peers.
  3. Maintain separate IPv4 and IPv6 adjacency/route acceptance tests.
  4. Monitor port exhaustion and data retention before scaling subscriber density.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A new peering site floods too many external routes into a provider IS-IS area and destabilizes internal shortest-path calculations. The most directly supported response is: Keep external interdomain routes under controlled redistribution with explicit prefix and metric policy. Technical basis: Unbounded redistribution expands IGP state and can affect convergence and resource use. Evidence of success: The link-state database contains only approved redistributed routes and stable internal paths. Ongoing protection: Review redistribution policy and route limits after adding external peers.

Incorrect Answers

A:

Redistribution without tagging and filtering can feed learned routes back into their origin domain. Maintaining that control would not track the failure described here. The relevant risk is: Unbounded redistribution expands IGP state and can affect convergence and resource use. Review this instead: Review redistribution policy and route limits after adding external peers.

C:

OSPFv3 was designed for IPv6 routing information and has protocol differences from OSPFv2. Maintaining that control would not track the failure described here. The relevant risk is: Unbounded redistribution expands IGP state and can affect convergence and resource use. Review this instead: Review redistribution policy and route limits after adding external peers.

D:

The alternative guards against: CGNAT multiplexes many private subscribers over limited public IPv4 address space. The root condition for this case is: Unbounded redistribution expands IGP state and can affect convergence and resource use. The focused prevention check is: Review redistribution policy and route limits after adding external peers.

Question 133

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A hub site must exchange IS-IS L2 routes between separately engineered regional Level-1 areas but is configured as L1-only. What is the best authorized corrective or investigative action for this service-provider network operations situation?

  1. Enable the planned L1/L2 boundary function and proper L2 connectivity on the hub.
  2. Review BGP best-path attributes in their selection order, starting with locally relevant preference settings.
  3. Translate the intent into supported IOS XR RPL constructs and check resulting actions.
  4. Trace MP-BGP receipt, route-target import policy, and VRF membership in sequence.

Explanation

Correct Answer

A:

For this scenario, the observed situation is: A hub site must exchange IS-IS L2 routes between separately engineered regional Level-1 areas but is configured as L1-only. The most directly supported response is: Enable the planned L1/L2 boundary function and proper L2 connectivity on the hub. Technical basis: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. Evidence of success: Routes between regional areas resolve through the documented L2 backbone path. Ongoing protection: Maintain area boundary templates and interarea route tests after changes.

Incorrect Answers

B:

The proposed option addresses this separate mechanism: BGP best-path choice is policy-driven and does not simply select the fewest physical hops. The stated problem instead depends on: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. The required response is: Enable the planned L1/L2 boundary function and proper L2 connectivity on the hub.

C:

The option fits a control for: Cisco route-policy languages differ across operating systems and cannot always be pasted interchangeably. The present failure is caused by a different mechanism: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. The targeted implementation is: Enable the planned L1/L2 boundary function and proper L2 connectivity on the hub.

D:

The option fits a control for: VPN route receipt and per-VRF installation depend on independent import policies. The present failure is caused by a different mechanism: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. The targeted implementation is: Enable the planned L1/L2 boundary function and proper L2 connectivity on the hub.

Question 134

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A hub site must exchange IS-IS L2 routes between separately engineered regional Level-1 areas but is configured as L1-only. Which observable result most directly verifies that this network issue was resolved?

  1. The routing and forwarding tables show only eligible installed next hops for the prefix.
  2. Routes between regional areas resolve through the documented L2 backbone path.
  3. The shortest-path tree reflects the intended relative capacity of 10G and 100G links.
  4. Traffic shifts rapidly to the validated backup next hop under controlled node failure.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: A hub site must exchange IS-IS L2 routes between separately engineered regional Level-1 areas but is configured as L1-only. The most directly supported response is: Enable the planned L1/L2 boundary function and proper L2 connectivity on the hub. Technical basis: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. Evidence of success: Routes between regional areas resolve through the documented L2 backbone path. Ongoing protection: Maintain area boundary templates and interarea route tests after changes.

Incorrect Answers

A:

BGP may retain several path candidates while selecting a subset for best-path and forwarding use. Evidence of that behavior would not establish the required outcome here. The case-specific failure is: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. A passing check should show: Routes between regional areas resolve through the documented L2 backbone path.

C:

The proposed test would be relevant to: OSPF default cost calculations can lose resolution when link speeds exceed the reference bandwidth. The reported problem follows from: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. Instead, verify: Routes between regional areas resolve through the documented L2 backbone path.

D:

The proposed test would be relevant to: BGP PIC precomputes viable alternate paths to reduce route-by-route failover delay. The reported problem follows from: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. Instead, verify: Routes between regional areas resolve through the documented L2 backbone path.

Question 135

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A hub site must exchange IS-IS L2 routes between separately engineered regional Level-1 areas but is configured as L1-only. Which underlying network infrastructure principle best explains the situation?

  1. IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology.
  2. BGP transport session establishment does not automatically enable every address family.
  3. High availability requires validating application-relevant reachability rather than only local link carrier state.
  4. BGP best-path choice is policy-driven and does not simply select the fewest physical hops.

Explanation

Correct Answer

A:

For this scenario, the observed situation is: A hub site must exchange IS-IS L2 routes between separately engineered regional Level-1 areas but is configured as L1-only. The most directly supported response is: Enable the planned L1/L2 boundary function and proper L2 connectivity on the hub. Technical basis: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. Evidence of success: Routes between regional areas resolve through the documented L2 backbone path. Ongoing protection: Maintain area boundary templates and interarea route tests after changes.

Incorrect Answers

B:

The option explains a separate issue: BGP transport session establishment does not automatically enable every address family. The reported condition instead follows from: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology.

C:

The option explains a separate issue: High availability requires validating application-relevant reachability rather than only local link carrier state. The reported condition instead follows from: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology.

D:

The option explains a separate issue: BGP best-path choice is policy-driven and does not simply select the fewest physical hops. The reported condition instead follows from: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology.

Question 136

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A hub site must exchange IS-IS L2 routes between separately engineered regional Level-1 areas but is configured as L1-only. Which continuing control best reduces recurrence of this problem?

  1. Test VPN AFI/SAFI and route-target policy during PE provisioning.
  2. Audit RT consistency and route-target filtering on PE changes.
  3. Maintain area boundary templates and interarea route tests after changes.
  4. Audit import and export RT membership for every service instance.

Explanation

Correct Answer

C:

For this scenario, the observed situation is: A hub site must exchange IS-IS L2 routes between separately engineered regional Level-1 areas but is configured as L1-only. The most directly supported response is: Enable the planned L1/L2 boundary function and proper L2 connectivity on the hub. Technical basis: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. Evidence of success: Routes between regional areas resolve through the documented L2 backbone path. Ongoing protection: Maintain area boundary templates and interarea route tests after changes.

Incorrect Answers

A:

The alternative guards against: BGP address families carry different kinds of NLRI and require explicit peer activation. The root condition for this case is: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. The focused prevention check is: Maintain area boundary templates and interarea route tests after changes.

B:

The alternative guards against: BGP extended communities carry service membership and routing-policy metadata. The root condition for this case is: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. The focused prevention check is: Maintain area boundary templates and interarea route tests after changes.

D:

That recurring practice manages a separate exposure: VPN route receipt and per-VRF installation depend on independent import policies. The present case instead depends on: IS-IS Level-2 provides interarea reachability while Level-1 focuses on intraarea topology. The suitable ongoing safeguard is: Maintain area boundary templates and interarea route tests after changes.

Question 137

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: An OSPFv2 interface remains stuck in EXSTART on an Ethernet service whose two ends have inconsistent MTUs. What is the best authorized corrective or investigative action for this service-provider network operations situation?

  1. Match the correct neighbor community or prefix-set and adjust local preference only for the desired category.
  2. Use a MAP-T mapping rule design and validate the assigned address and port set.
  3. Check and reconcile supported MTU and adjacency parameters before applying disruptive resets.
  4. Compare BGP accepted NLRI, best-path state, route distance, and installed RIB entries.

Explanation

Correct Answer

C:

For this scenario, the observed situation is: An OSPFv2 interface remains stuck in EXSTART on an Ethernet service whose two ends have inconsistent MTUs. The most directly supported response is: Check and reconcile supported MTU and adjacency parameters before applying disruptive resets. Technical basis: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. Evidence of success: Neighbors progress to FULL and exchange the expected link-state database. Ongoing protection: Include link MTU compatibility in OSPF turn-up validation.

Incorrect Answers

A:

The option fits a control for: Route maps express ordered match-and-set conditions whose scope determines policy side effects. The present failure is caused by a different mechanism: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. The targeted implementation is: Check and reconcile supported MTU and adjacency parameters before applying disruptive resets.

B:

The option fits a control for: MAP-T supports algorithmic IPv4-to-IPv6 translation and port-set assignment rather than central per-flow NAT state. The present failure is caused by a different mechanism: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. The targeted implementation is: Check and reconcile supported MTU and adjacency parameters before applying disruptive resets.

D:

Reception of BGP NLRI does not necessarily imply RIB or FIB installation. That principle governs the alternative intervention. The issue described here is different: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. The case-matched corrective action is: Check and reconcile supported MTU and adjacency parameters before applying disruptive resets.

Question 138

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: An OSPFv2 interface remains stuck in EXSTART on an Ethernet service whose two ends have inconsistent MTUs. Which observable result most directly verifies that this network issue was resolved?

  1. The chosen route is explained by the actual effective attributes present in the BGP table.
  2. Neighbors progress to FULL and exchange the expected link-state database.
  3. The operator can identify whether policy, reachability, or administrative preference blocked installation.
  4. Multiple subscribers share public IPv4 addresses while logs map sessions to the correct subscriber.

Explanation

Correct Answer

B:

For this scenario, the observed situation is: An OSPFv2 interface remains stuck in EXSTART on an Ethernet service whose two ends have inconsistent MTUs. The most directly supported response is: Check and reconcile supported MTU and adjacency parameters before applying disruptive resets. Technical basis: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. Evidence of success: Neighbors progress to FULL and exchange the expected link-state database. Ongoing protection: Include link MTU compatibility in OSPF turn-up validation.

Incorrect Answers

A:

The proposed test would be relevant to: BGP evaluates ordered criteria, so later comparisons apply only when earlier attributes are tied. The reported problem follows from: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. Instead, verify: Neighbors progress to FULL and exchange the expected link-state database.

C:

That observation tests a different mechanism: Reception of BGP NLRI does not necessarily imply RIB or FIB installation. It cannot establish this case, whose mechanism is: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. The needed verification is: Neighbors progress to FULL and exchange the expected link-state database.

D:

That observation tests a different mechanism: CGNAT multiplexes many private subscribers over limited public IPv4 address space. It cannot establish this case, whose mechanism is: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. The needed verification is: Neighbors progress to FULL and exchange the expected link-state database.

Question 139

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: An OSPFv2 interface remains stuck in EXSTART on an Ethernet service whose two ends have inconsistent MTUs. Which underlying network infrastructure principle best explains the situation?

  1. Link aggregation requires compatible attachment and control-plane semantics at both ends.
  2. Redistribution connects control-plane domains and can leak unintended reachability if unfiltered.
  3. OSPF database description exchange can fail when adjacent interfaces disagree on required parameters.
  4. IS-IS shortest-path selection uses advertised metrics rather than inferring every physical speed change.

Explanation

Correct Answer

C:

For this scenario, the observed situation is: An OSPFv2 interface remains stuck in EXSTART on an Ethernet service whose two ends have inconsistent MTUs. The most directly supported response is: Check and reconcile supported MTU and adjacency parameters before applying disruptive resets. Technical basis: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. Evidence of success: Neighbors progress to FULL and exchange the expected link-state database. Ongoing protection: Include link MTU compatibility in OSPF turn-up validation.

Incorrect Answers

A:

The alternative principle describes: Link aggregation requires compatible attachment and control-plane semantics at both ends. In this question, the decisive mechanism is: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. These are distinct technical causes, even when they share a platform.

B:

The alternative principle describes: Redistribution connects control-plane domains and can leak unintended reachability if unfiltered. In this question, the decisive mechanism is: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. These are distinct technical causes, even when they share a platform.

D:

The alternative principle describes: IS-IS shortest-path selection uses advertised metrics rather than inferring every physical speed change. In this question, the decisive mechanism is: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. These are distinct technical causes, even when they share a platform.

Question 140

Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: An OSPFv2 interface remains stuck in EXSTART on an Ethernet service whose two ends have inconsistent MTUs. Which continuing control best reduces recurrence of this problem?

  1. Use route-state and next-hop resolution verification in route-reflector troubleshooting.
  2. Maintain route-origin and maximum-prefix inventories for customer advertisements.
  3. Run TCP session tests whenever peering ACLs are changed.
  4. Include link MTU compatibility in OSPF turn-up validation.

Explanation

Correct Answer

D:

For this scenario, the observed situation is: An OSPFv2 interface remains stuck in EXSTART on an Ethernet service whose two ends have inconsistent MTUs. The most directly supported response is: Check and reconcile supported MTU and adjacency parameters before applying disruptive resets. Technical basis: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. Evidence of success: Neighbors progress to FULL and exchange the expected link-state database. Ongoing protection: Include link MTU compatibility in OSPF turn-up validation.

Incorrect Answers

A:

That recurring practice manages a separate exposure: BGP may retain several path candidates while selecting a subset for best-path and forwarding use. The present case instead depends on: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. The suitable ongoing safeguard is: Include link MTU compatibility in OSPF turn-up validation.

B:

That recurring practice manages a separate exposure: BGP routing policy controls prefix acceptance, while forwarding uses the most specific installed route. The present case instead depends on: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. The suitable ongoing safeguard is: Include link MTU compatibility in OSPF turn-up validation.

C:

That recurring practice manages a separate exposure: BGP requires a successful TCP session before exchanging UPDATE messages. The present case instead depends on: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. The suitable ongoing safeguard is: Include link MTU compatibility in OSPF turn-up validation.