Question 210
Original unofficial Cisco 350-501 SPCOR v1.1 service-provider network operations scenario: A route-reflector's IPv4 sessions work but VPNv4 customer routes do not propagate after a new PE joins. Which observable result most directly verifies that this network issue was resolved?
Explanation
Correct Answer
For this scenario, the observed situation is: A route-reflector's IPv4 sessions work but VPNv4 customer routes do not propagate after a new PE joins. The most directly supported response is: Enable the correct MP-BGP VPN address family on authorized sessions and preserve service attributes. Technical basis: BGP address families carry different kinds of NLRI and require explicit peer activation. Evidence of success: The PE receives the intended VPN NLRI with labels and import targets under the service design. Ongoing protection: Test VPN AFI/SAFI and route-target policy during PE provisioning.
Incorrect Answers
That observation tests a different mechanism: NAT44 rewrites IPv4 addressing across a defined inside and outside interface boundary. It cannot establish this case, whose mechanism is: BGP address families carry different kinds of NLRI and require explicit peer activation. The needed verification is: The PE receives the intended VPN NLRI with labels and import targets under the service design.
That observation tests a different mechanism: OSPF database description exchange can fail when adjacent interfaces disagree on required parameters. It cannot establish this case, whose mechanism is: BGP address families carry different kinds of NLRI and require explicit peer activation. The needed verification is: The PE receives the intended VPN NLRI with labels and import targets under the service design.
That observation tests a different mechanism: BGP best-path choice is policy-driven and does not simply select the fewest physical hops. It cannot establish this case, whose mechanism is: BGP address families carry different kinds of NLRI and require explicit peer activation. The needed verification is: The PE receives the intended VPN NLRI with labels and import targets under the service design.