McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 25

Question 240

At the Willowford network modernization program, a redundant uplink forwards over a slow backup because its spanning tree cost is lower than intended. Which ongoing control best prevents this issue from recurring?

  1. Review spanning tree boundaries during equipment refreshes
  2. Recheck port speed after transceiver replacements
  3. Trend per-port PoE consumption when phone models are upgraded
  4. Review STP costs after speed and optics upgrades

Explanation

Correct Answer

D:

This control works beyond the initial remediation because it requires the team to review STP costs after speed and optics upgrades.

Incorrect Answers

A:

That routine supports stp mode interoperability, but the relevant ongoing risk requires the team to review STP costs after speed and optics upgrades. For the Willowford network modernization program, the direct corrective action is to set supported path costs or priorities to align STP selection with approved link roles.

B:

Recheck port speed after transceiver replacements. That safeguard would help prevent recurrence of: Incompatible speed configuration can prevent stable physical link negotiation. The risk being reviewed here is instead: STP chooses paths from bridge and port metrics rather than business labels. The matching ongoing control is: Review STP costs after speed and optics upgrades.

C:

Trend per-port PoE consumption when phone models are upgraded is not the primary recurring safeguard for this problem. The team should review STP costs after speed and optics upgrades. For the Willowford network modernization program, the direct corrective action is to set supported path costs or priorities to align STP selection with approved link roles.

Question 241

At the Pinewick managed-network provider, a ring experiences continuous MAC relearning and topology changes after a new physical connection. Which implementation choice best addresses the situation?

  1. Set supported path costs or priorities to align STP selection with approved link roles
  2. Examine STP states and the recently added links before correcting the actual loop
  3. Use a supported static aggregate only if both connected ends are intentionally configured for that mode
  4. Trace QoS classification and remarking along the FortiSwitch forwarding path

Explanation

Correct Answer

B:

Examine STP states and the recently added links before correcting the actual loop is the best response because an uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. A focused validation would establish that topology-change counters stabilize and duplicate frame rates return to baseline.

Incorrect Answers

A:

This alternative would be suitable where sTP chooses paths from bridge and port metrics rather than business labels. It does not by itself resolve the need to examine STP states and the recently added links before correcting the actual loop. For the Pinewick managed-network provider, the direct corrective action is to examine STP states and the recently added links before correcting the actual loop.

C:

The option addresses the separate situation where a peer that does not negotiate LACP cannot form a dynamic aggregated link. For this case, the more appropriate response is to examine STP states and the recently added links before correcting the actual loop. For the Pinewick managed-network provider, the direct corrective action is to examine STP states and the recently added links before correcting the actual loop.

D:

The offered alternative is: Trace QoS classification and remarking along the FortiSwitch forwarding path. It addresses this separate failure mode: A later hop can undo correct ingress classifications and move packets to the wrong class. In the current case, the observed mechanism is: An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. The keyed action, Examine STP states and the recently added links before correcting the actual loop., targets that condition more directly.

Question 242

At the Pinewick managed-network provider, a ring experiences continuous MAC relearning and topology changes after a new physical connection. What risk should the team identify as the primary issue?

  1. A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions
  2. Excess attenuation can corrupt frames even when physical link occasionally remains up
  3. Excess broadcasts can consume shared switching bandwidth and CPU resources
  4. An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes

Explanation

Correct Answer

D:

The architectural weakness is that an uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. It can be addressed through the controlled change to examine STP states and the recently added links before correcting the actual loop.

Incorrect Answers

A:

The offered action is: A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. It is associated with this separate technical condition: A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. The actual incident concerns a different dependency: An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. The corresponding change is: An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes.

B:

Excess attenuation can corrupt frames even when physical link occasionally remains up. That may occur elsewhere, but the evidence at the Pinewick managed-network provider instead points to the fact that an uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes.

C:

The offered alternative is: Excess broadcasts can consume shared switching bandwidth and CPU resources. It addresses this separate failure mode: Excess broadcasts can consume shared switching bandwidth and CPU resources. In the current case, the observed mechanism is: An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. The keyed action, An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes., targets that condition more directly.

Question 243

At the Pinewick managed-network provider, a ring experiences continuous MAC relearning and topology changes after a new physical connection. What is the strongest acceptance test for this change?

  1. Topology-change counters stabilize and duplicate frame rates return to baseline
  2. A controlled redundancy test avoids storms while preserving approved failover
  3. All authorized cameras stay online under peak simultaneous load
  4. Both endpoints show acceptable receive power and stable forwarding

Explanation

Correct Answer

A:

Because an uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes, the required evidence must show that topology-change counters stabilize and duplicate frame rates return to baseline. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Pinewick managed-network provider, a result about stp disabled on redundant bridge would not show that the team corrected the failure where an uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes.

C:

All authorized cameras stay online under peak simultaneous load. That result would test a control for this other failure: An available Ethernet port does not mean the power supply has spare PoE capacity. The question instead requires evidence for: An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. The direct outcome to verify is: Topology-change counters stabilize and duplicate frame rates return to baseline.

D:

The offered observation is: Both endpoints show acceptable receive power and stable forwarding. It would support the separate mechanism: Physical connector compatibility does not guarantee optical transmitter receiver compatibility. In this case the decisive dependency is: An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. The original keyed verification is: Topology-change counters stabilize and duplicate frame rates return to baseline.

Question 244

At the Pinewick managed-network provider, a ring experiences continuous MAC relearning and topology changes after a new physical connection. Which setting or practice should be reviewed in future?

  1. Retest root guard on distribution boundary ports after cabling changes
  2. Retest phone and data VLANs when desk cabling changes
  3. Audit trusted and untrusted traffic classes after trunk changes
  4. Monitor STP change events after each rack move

Explanation

Correct Answer

D:

For the Pinewick managed-network provider, this maintenance action preserves the fix: monitor STP change events after each rack move. It should be revisited as the workload evolves.

Incorrect Answers

A:

Retest root guard on distribution boundary ports after cabling changes is not the primary recurring safeguard for this problem. The team should monitor STP change events after each rack move. For the Pinewick managed-network provider, the direct corrective action is to examine STP states and the recently added links before correcting the actual loop.

B:

Retest phone and data VLANs when desk cabling changes. That safeguard would help prevent recurrence of: Phones may fall into the wrong subnet when tagged voice frames are not allowed on the port. The risk being reviewed here is instead: An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. The matching ongoing control is: Monitor STP change events after each rack move.

C:

The suggested preventive check is: Audit trusted and untrusted traffic classes after trunk changes. Its technical scope concerns: A later hop can undo correct ingress classifications and move packets to the wrong class. This question asks how to sustain control over: An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. The more targeted safeguard is: Monitor STP change events after each rack move.

Question 245

At the Birchhaven branch IT department, a lab disables spanning tree on both parallel trunk links to remove a blocked-port warning. Which corrective action best meets the requirement?

  1. Remove unsafe BPDU filtering and restore protocol exchange on intended switch-to-switch links
  2. Inspect link state transceiver counters and supported loopback or cable diagnostics first
  3. Restore supported STP or a valid aggregated topology instead of creating unrestricted redundant Layer 2 paths
  4. Add the approved VLAN to the permitted VLAN set on each required trunk hop

Explanation

Correct Answer

C:

The reported facts support this change rather than a general platform replacement. The team should restore supported STP or a valid aggregated topology instead of creating unrestricted redundant Layer 2 paths because parallel unmanaged forwarding paths can cause persistent Ethernet loops. A suitable test confirms that a controlled redundancy test avoids storms while preserving approved failover.

Incorrect Answers

A:

The option addresses the separate situation where suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. For this case, the more appropriate response is to restore supported STP or a valid aggregated topology instead of creating unrestricted redundant Layer 2 paths. For the Birchhaven branch IT department, the direct corrective action is to restore supported STP or a valid aggregated topology instead of creating unrestricted redundant Layer 2 paths.

B:

The offered action is: Inspect link state transceiver counters and supported loopback or cable diagnostics first. It is associated with this separate technical condition: Physical port faults cannot be distinguished from configuration causes by restart alone. The actual incident concerns a different dependency: Parallel unmanaged forwarding paths can cause persistent Ethernet loops. The corresponding change is: Restore supported STP or a valid aggregated topology instead of creating unrestricted redundant Layer 2 paths.

D:

The offered alternative is: Add the approved VLAN to the permitted VLAN set on each required trunk hop. It addresses this separate failure mode: A physically healthy trunk does not automatically carry every VLAN identifier. In the current case, the observed mechanism is: Parallel unmanaged forwarding paths can cause persistent Ethernet loops. The keyed action, Restore supported STP or a valid aggregated topology instead of creating unrestricted redundant Layer 2 paths., targets that condition more directly.

Question 246

At the Birchhaven branch IT department, a lab disables spanning tree on both parallel trunk links to remove a blocked-port warning. Which underlying issue most directly explains this situation?

  1. Different MSTP region parameters change how peers interpret instances and topology
  2. An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy
  3. Local bypass routing can defeat the approved security inspection architecture
  4. Parallel unmanaged forwarding paths can cause persistent Ethernet loops

Explanation

Correct Answer

D:

The problem stems from the fact that parallel unmanaged forwarding paths can cause persistent Ethernet loops. A correct solution would restore supported STP or a valid aggregated topology instead of creating unrestricted redundant Layer 2 paths and check that a controlled redundancy test avoids storms while preserving approved failover.

Incorrect Answers

A:

The offered principle is: Different MSTP region parameters change how peers interpret instances and topology. In the source material it is associated with: Different MSTP region parameters change how peers interpret instances and topology. This case has a different controlling cause: Parallel unmanaged forwarding paths can cause persistent Ethernet loops. Its keyed mechanism is: Parallel unmanaged forwarding paths can cause persistent Ethernet loops.

B:

An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. That is not the mechanism that accounts for the stated failure at the Birchhaven branch IT department.

C:

The offered principle is: Local bypass routing can defeat the approved security inspection architecture. In the source material it is associated with: Local bypass routing can defeat the approved security inspection architecture. This case has a different controlling cause: Parallel unmanaged forwarding paths can cause persistent Ethernet loops. Its keyed mechanism is: Parallel unmanaged forwarding paths can cause persistent Ethernet loops.

Question 247

At the Birchhaven branch IT department, a lab disables spanning tree on both parallel trunk links to remove a blocked-port warning. What evidence would justify considering this concern addressed?

  1. The intended distribution switch is root and alternate paths block as designed
  2. An administrator can reach approved management endpoints while a guest cannot
  3. A controlled redundancy test avoids storms while preserving approved failover
  4. One link is active and failover moves management to the standby without looping

Explanation

Correct Answer

C:

At the Birchhaven branch IT department, evidence that a controlled redundancy test avoids storms while preserving approved failover directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

The intended distribution switch is root and alternate paths block as designed. That result would test a control for this other failure: Unexpected root election creates suboptimal forwarding paths and fragile redundancy. The question instead requires evidence for: Parallel unmanaged forwarding paths can cause persistent Ethernet loops. The direct outcome to verify is: A controlled redundancy test avoids storms while preserving approved failover.

B:

The offered observation is: An administrator can reach approved management endpoints while a guest cannot. It would support the separate mechanism: Unrestricted management VLAN placement increases exposure to unauthorized device access. In this case the decisive dependency is: Parallel unmanaged forwarding paths can cause persistent Ethernet loops. The original keyed verification is: A controlled redundancy test avoids storms while preserving approved failover.

D:

The offered observation is: One link is active and failover moves management to the standby without looping. It would support the separate mechanism: A FortiLink split interface may intentionally keep only one physical path active without MCLAG. In this case the decisive dependency is: Parallel unmanaged forwarding paths can cause persistent Ethernet loops. The original keyed verification is: A controlled redundancy test avoids storms while preserving approved failover.

Question 248

At the Birchhaven branch IT department, a lab disables spanning tree on both parallel trunk links to remove a blocked-port warning. How should the organization sustain the improvement?

  1. Review protected edge ports during new device installation
  2. Prevent disabling STP outside reviewed topology designs
  3. Exercise ring link failures during annual resilience checks
  4. Monitor DHCP relay endpoints after server migrations

Explanation

Correct Answer

B:

For the Birchhaven branch IT department, this maintenance action preserves the fix: prevent disabling STP outside reviewed topology designs. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Review protected edge ports during new device installation. Its technical scope concerns: Unexpected bridge protocol frames on an edge port indicate a possible unauthorized loop. This question asks how to sustain control over: Parallel unmanaged forwarding paths can cause persistent Ethernet loops. The more targeted safeguard is: Prevent disabling STP outside reviewed topology designs.

C:

That routine supports fortilink ring availability, but the relevant ongoing risk requires the team to prevent disabling STP outside reviewed topology designs. For the Birchhaven branch IT department, the direct corrective action is to restore supported STP or a valid aggregated topology instead of creating unrestricted redundant Layer 2 paths.

D:

Monitor DHCP relay endpoints after server migrations. That safeguard would help prevent recurrence of: DHCP broadcasts do not cross routed interfaces without a relay or alternate server path. The risk being reviewed here is instead: Parallel unmanaged forwarding paths can cause persistent Ethernet loops. The matching ongoing control is: Prevent disabling STP outside reviewed topology designs.

Question 249

At the Oakport data network services firm, a fiber port loses BPDUs on one direction and incorrectly transitions toward forwarding. Which approach best resolves the described issue?

  1. Examine STP states and the recently added links before correcting the actual loop
  2. Check supported MAC table capacity and learning patterns before resizing or segmenting the design
  3. Verify FortiSwitch model port breakout capability and use the supported split-port mode and optics
  4. Use supported loop guard protection or correct the failing link to avoid unsafe forwarding

Explanation

Correct Answer

D:

Use supported loop guard protection or correct the failing link to avoid unsafe forwarding is the best response because a unidirectional control-plane failure can make a redundant path appear safe when it is not. A focused validation would establish that a simulated BPDU loss does not create a loop and raises a detectable event.

Incorrect Answers

A:

Examine STP states and the recently added links before correcting the actual loop can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to use supported loop guard protection or correct the failing link to avoid unsafe forwarding. For the Oakport data network services firm, the direct corrective action is to use supported loop guard protection or correct the failing link to avoid unsafe forwarding.

B:

The offered action is: Check supported MAC table capacity and learning patterns before resizing or segmenting the design. It is associated with this separate technical condition: Excessive unique source addresses may strain hardware learning resources. The actual incident concerns a different dependency: A unidirectional control-plane failure can make a redundant path appear safe when it is not. The corresponding change is: Use supported loop guard protection or correct the failing link to avoid unsafe forwarding.

C:

This alternative would be suitable where not every physical port supports subdivision into the requested lanes and speeds. It does not by itself resolve the need to use supported loop guard protection or correct the failing link to avoid unsafe forwarding. For the Oakport data network services firm, the direct corrective action is to use supported loop guard protection or correct the failing link to avoid unsafe forwarding.

Question 250

At the Oakport data network services firm, a fiber port loses BPDUs on one direction and incorrectly transitions toward forwarding. Which explanation best accounts for the concern?

  1. Unexpected root election creates suboptimal forwarding paths and fragile redundancy
  2. A unidirectional control-plane failure can make a redundant path appear safe when it is not
  3. A physically healthy trunk does not automatically carry every VLAN identifier
  4. A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device

Explanation

Correct Answer

B:

The problem stems from the fact that a unidirectional control-plane failure can make a redundant path appear safe when it is not. A correct solution would use supported loop guard protection or correct the failing link to avoid unsafe forwarding and check that a simulated BPDU loss does not create a loop and raises a detectable event.

Incorrect Answers

A:

The offered principle is: Unexpected root election creates suboptimal forwarding paths and fragile redundancy. In the source material it is associated with: Unexpected root election creates suboptimal forwarding paths and fragile redundancy. This case has a different controlling cause: A unidirectional control-plane failure can make a redundant path appear safe when it is not. Its keyed mechanism is: A unidirectional control-plane failure can make a redundant path appear safe when it is not.

C:

The offered principle is: A physically healthy trunk does not automatically carry every VLAN identifier. In the source material it is associated with: A physically healthy trunk does not automatically carry every VLAN identifier. This case has a different controlling cause: A unidirectional control-plane failure can make a redundant path appear safe when it is not. Its keyed mechanism is: A unidirectional control-plane failure can make a redundant path appear safe when it is not.

D:

A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. That may occur elsewhere, but the evidence at the Oakport data network services firm instead points to the fact that a unidirectional control-plane failure can make a redundant path appear safe when it is not.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests