McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 27

Question 260

At the Silverport infrastructure service operator, an administrator enables BPDU filtering on an inter-switch trunk to make a blocked link forward. How should the organization sustain the improvement?

  1. Review one-way fiber failures and STP protection during maintenance
  2. Monitor collision or CRC trends after physical changes
  3. Flag BPDU filter changes on infrastructure uplinks for review
  4. Baseline active routes following each topology change

Explanation

Correct Answer

C:

The continuing safeguard is to flag BPDU filter changes on infrastructure uplinks for review. It helps avoid the original condition: suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop.

Incorrect Answers

A:

The suggested preventive check is: Review one-way fiber failures and STP protection during maintenance. Its technical scope concerns: A unidirectional control-plane failure can make a redundant path appear safe when it is not. This question asks how to sustain control over: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The more targeted safeguard is: Flag BPDU filter changes on infrastructure uplinks for review.

B:

Monitor collision or CRC trends after physical changes. That safeguard would help prevent recurrence of: A speed or duplex mismatch can create retransmissions despite an illuminated link. The risk being reviewed here is instead: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The matching ongoing control is: Flag BPDU filter changes on infrastructure uplinks for review.

D:

Baseline active routes following each topology change. That safeguard would help prevent recurrence of: Configured intent may not match the route actually selected for forwarding. The risk being reviewed here is instead: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The matching ongoing control is: Flag BPDU filter changes on infrastructure uplinks for review.

Question 261

At the Elmhurst campus infrastructure group, a FortiSwitch using MSTP connects to an older RSTP device but engineers assume identical per-VLAN behavior. Which approach best resolves the described issue?

  1. Verify supported STP compatibility at the region boundary and plan a loop-free topology
  2. Align the MST region name revision and VLAN instance mapping across participating switches
  3. Reconcile the VLAN identification plan and consistent tagging through each inter-switch hop
  4. Correct the supported MAC-based VLAN classification rule and validate precedence on the target platform

Explanation

Correct Answer

A:

The reported facts support this change rather than a general platform replacement. The team should verify supported STP compatibility at the region boundary and plan a loop-free topology because different STP variants can interoperate at boundaries without sharing every internal instance decision. A suitable test confirms that a boundary failure test reconverges safely with documented root behavior.

Incorrect Answers

B:

The offered action is: Align the MST region name revision and VLAN instance mapping across participating switches. It is associated with this separate technical condition: Different MSTP region parameters change how peers interpret instances and topology. The actual incident concerns a different dependency: Different STP variants can interoperate at boundaries without sharing every internal instance decision. The corresponding change is: Verify supported STP compatibility at the region boundary and plan a loop-free topology.

C:

This alternative would be suitable where the same department traffic can enter different broadcast domains when trunk identifiers disagree. It does not by itself resolve the need to verify supported STP compatibility at the region boundary and plan a loop-free topology. For the Elmhurst campus infrastructure group, the direct corrective action is to verify supported STP compatibility at the region boundary and plan a loop-free topology.

D:

Correct the supported MAC-based VLAN classification rule and validate precedence on the target platform addresses a different kind of problem: a MAC classification mismatch can override the VLAN intended for a known endpoint. Here the reported weakness is that different STP variants can interoperate at boundaries without sharing every internal instance decision. For the Elmhurst campus infrastructure group, the direct corrective action is to verify supported STP compatibility at the region boundary and plan a loop-free topology.

Question 262

At the Elmhurst campus infrastructure group, a FortiSwitch using MSTP connects to an older RSTP device but engineers assume identical per-VLAN behavior. Which explanation best accounts for the concern?

  1. Different MSTP region parameters change how peers interpret instances and topology
  2. Gigabit copper Ethernet needs correctly functioning cable pairs and termination
  3. Different STP variants can interoperate at boundaries without sharing every internal instance decision
  4. A switch safety action can disable forwarding independently of physical link health

Explanation

Correct Answer

C:

The situation shows that different STP variants can interoperate at boundaries without sharing every internal instance decision, rather than merely a monitoring or presentation issue. Remediation is to verify supported STP compatibility at the region boundary and plan a loop-free topology.

Incorrect Answers

A:

The offered principle is: Different MSTP region parameters change how peers interpret instances and topology. In the source material it is associated with: Different MSTP region parameters change how peers interpret instances and topology. This case has a different controlling cause: Different STP variants can interoperate at boundaries without sharing every internal instance decision. Its keyed mechanism is: Different STP variants can interoperate at boundaries without sharing every internal instance decision.

B:

Although gigabit copper Ethernet needs correctly functioning cable pairs and termination, the presented symptoms do not support that as the primary cause; they indicate that different STP variants can interoperate at boundaries without sharing every internal instance decision. For the Elmhurst campus infrastructure group, the direct corrective action is to verify supported STP compatibility at the region boundary and plan a loop-free topology.

D:

A switch safety action can disable forwarding independently of physical link health. That may occur elsewhere, but the evidence at the Elmhurst campus infrastructure group instead points to the fact that different STP variants can interoperate at boundaries without sharing every internal instance decision.

Question 263

At the Elmhurst campus infrastructure group, a FortiSwitch using MSTP connects to an older RSTP device but engineers assume identical per-VLAN behavior. Which test result best shows the requirement is met?

  1. A staged ring test retains switch management and does not form a loop
  2. The downstream serial number appears for authorization with the correct uplink topology
  3. A test endpoint receives its employee subnet and remains isolated from visitors
  4. A boundary failure test reconverges safely with documented root behavior

Explanation

Correct Answer

D:

The team can confirm the fix by showing that a boundary failure test reconverges safely with documented root behavior. This aligns with the corrective design to verify supported STP compatibility at the region boundary and plan a loop-free topology.

Incorrect Answers

A:

A staged ring test retains switch management and does not form a loop. That result would test a control for this other failure: A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. The question instead requires evidence for: Different STP variants can interoperate at boundaries without sharing every internal instance decision. The direct outcome to verify is: A boundary failure test reconverges safely with documented root behavior.

B:

The offered observation is: The downstream serial number appears for authorization with the correct uplink topology. It would support the separate mechanism: A downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path. In this case the decisive dependency is: Different STP variants can interoperate at boundaries without sharing every internal instance decision. The original keyed verification is: A boundary failure test reconverges safely with documented root behavior.

C:

A test endpoint receives its employee subnet and remains isolated from visitors. That result would test a control for this other failure: Untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation. The question instead requires evidence for: Different STP variants can interoperate at boundaries without sharing every internal instance decision. The direct outcome to verify is: A boundary failure test reconverges safely with documented root behavior.

Question 264

At the Elmhurst campus infrastructure group, a FortiSwitch using MSTP connects to an older RSTP device but engineers assume identical per-VLAN behavior. Which ongoing control best prevents this issue from recurring?

  1. Audit MST instance mapping when VLANs are added
  2. Audit native VLAN mappings whenever endpoint ports are moved
  3. Monitor repeated violations rather than clearing the state blindly
  4. Review spanning tree boundaries during equipment refreshes

Explanation

Correct Answer

D:

This control works beyond the initial remediation because it requires the team to review spanning tree boundaries during equipment refreshes.

Incorrect Answers

A:

That routine supports mstp instance distribution, but the relevant ongoing risk requires the team to review spanning tree boundaries during equipment refreshes. For the Elmhurst campus infrastructure group, the direct corrective action is to verify supported STP compatibility at the region boundary and plan a loop-free topology.

B:

Audit native VLAN mappings whenever endpoint ports are moved. That safeguard would help prevent recurrence of: Untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation. The risk being reviewed here is instead: Different STP variants can interoperate at boundaries without sharing every internal instance decision. The matching ongoing control is: Review spanning tree boundaries during equipment refreshes.

C:

Monitor repeated violations rather than clearing the state blindly is not the primary recurring safeguard for this problem. The team should review spanning tree boundaries during equipment refreshes. For the Elmhurst campus infrastructure group, the direct corrective action is to verify supported STP compatibility at the region boundary and plan a loop-free topology.

Question 265

At the Riverbrook network security team, a FortiLink-managed switch ring behaves unexpectedly after a technician changes STP ports without consulting its managed topology. Which implementation choice best addresses the situation?

  1. Check FortiLink-supported STP settings and controller management expectations before overriding local ports
  2. Verify supported STP compatibility at the region boundary and plan a loop-free topology
  3. Correct the supported MAC-based VLAN classification rule and validate precedence on the target platform
  4. Consult the version-specific FortiSwitch feature matrix and compatible transceiver list for the exact hardware

Explanation

Correct Answer

A:

This solution addresses the stated limitation: a managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. Implementing it means the team should check FortiLink-supported STP settings and controller management expectations before overriding local ports, then verify that a staged ring test retains switch management and does not form a loop.

Incorrect Answers

B:

Verify supported STP compatibility at the region boundary and plan a loop-free topology addresses a different kind of problem: different STP variants can interoperate at boundaries without sharing every internal instance decision. Here the reported weakness is that a managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. For the Riverbrook network security team, the direct corrective action is to check FortiLink-supported STP settings and controller management expectations before overriding local ports.

C:

The option addresses the separate situation where a MAC classification mismatch can override the VLAN intended for a known endpoint. For this case, the more appropriate response is to check FortiLink-supported STP settings and controller management expectations before overriding local ports. For the Riverbrook network security team, the direct corrective action is to check FortiLink-supported STP settings and controller management expectations before overriding local ports.

D:

The offered alternative is: Consult the version-specific FortiSwitch feature matrix and compatible transceiver list for the exact hardware. It addresses this separate failure mode: Port speed and optics support vary across switch families and FortiSwitchOS versions. In the current case, the observed mechanism is: A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. The keyed action, Check FortiLink-supported STP settings and controller management expectations before overriding local ports., targets that condition more directly.

Question 266

At the Riverbrook network security team, a FortiLink-managed switch ring behaves unexpectedly after a technician changes STP ports without consulting its managed topology. What risk should the team identify as the primary issue?

  1. A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions
  2. Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop
  3. A route pointing at an unreachable neighbor cannot forward outside connected subnets
  4. An intermediary can block discovery advertisements even when Ethernet connectivity works

Explanation

Correct Answer

A:

The situation shows that a managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions, rather than merely a monitoring or presentation issue. Remediation is to check FortiLink-supported STP settings and controller management expectations before overriding local ports.

Incorrect Answers

B:

Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. That may occur elsewhere, but the evidence at the Riverbrook network security team instead points to the fact that a managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions.

C:

The offered alternative is: A route pointing at an unreachable neighbor cannot forward outside connected subnets. It addresses this separate failure mode: A route pointing at an unreachable neighbor cannot forward outside connected subnets. In the current case, the observed mechanism is: A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. The keyed action, A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions., targets that condition more directly.

D:

An intermediary can block discovery advertisements even when Ethernet connectivity works. That is not the mechanism that accounts for the stated failure at the Riverbrook network security team.

Question 267

At the Riverbrook network security team, a FortiLink-managed switch ring behaves unexpectedly after a technician changes STP ports without consulting its managed topology. What is the strongest acceptance test for this change?

  1. Neighbor bridge state is discovered and one redundant path is safely controlled
  2. The phone receives the correct VLAN policy after the path is repaired
  3. An approved cross-subnet test succeeds while an unapproved flow remains blocked
  4. A staged ring test retains switch management and does not form a loop

Explanation

Correct Answer

D:

The intended correction is to check FortiLink-supported STP settings and controller management expectations before overriding local ports. The decisive verification is that a staged ring test retains switch management and does not form a loop, rather than only confirming configuration was saved.

Incorrect Answers

A:

Neighbor bridge state is discovered and one redundant path is safely controlled. That result would test a control for this other failure: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The question instead requires evidence for: A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. The direct outcome to verify is: A staged ring test retains switch management and does not form a loop.

B:

At the Riverbrook network security team, a result about voice vlan via lldp link mismatch would not show that the team corrected the failure where a managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions.

C:

An approved cross-subnet test succeeds while an unapproved flow remains blocked. That result would test a control for this other failure: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. The question instead requires evidence for: A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. The direct outcome to verify is: A staged ring test retains switch management and does not form a loop.

Question 268

At the Riverbrook network security team, a FortiLink-managed switch ring behaves unexpectedly after a technician changes STP ports without consulting its managed topology. Which setting or practice should be reviewed in future?

  1. Compare MSTP region digests when adding a new switch
  2. Revalidate static route next hops when WAN routers change
  3. Require controller-aware review for managed STP configuration changes
  4. Baseline active routes following each topology change

Explanation

Correct Answer

C:

The team should require controller-aware review for managed STP configuration changes. That recurring practice targets the same weakness, namely that a managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions.

Incorrect Answers

A:

Compare MSTP region digests when adding a new switch is not the primary recurring safeguard for this problem. The team should require controller-aware review for managed STP configuration changes. For the Riverbrook network security team, the direct corrective action is to check FortiLink-supported STP settings and controller management expectations before overriding local ports.

B:

Revalidate static route next hops when WAN routers change. That safeguard would help prevent recurrence of: A route pointing at an unreachable neighbor cannot forward outside connected subnets. The risk being reviewed here is instead: A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. The matching ongoing control is: Require controller-aware review for managed STP configuration changes.

D:

Baseline active routes following each topology change. That safeguard would help prevent recurrence of: Configured intent may not match the route actually selected for forwarding. The risk being reviewed here is instead: A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. The matching ongoing control is: Require controller-aware review for managed STP configuration changes.

Question 269

At the Foxhaven managed-network provider, a newly connected server cannot link because its FortiSwitch physical port was left administratively disabled. Which corrective action best meets the requirement?

  1. Consult the version-specific FortiSwitch feature matrix and compatible transceiver list for the exact hardware
  2. Enable the approved SSID tagged VLANs on the FortiSwitch uplink while maintaining management access
  3. Enable the approved physical port and verify the intended access policy
  4. Account for the split interface active and standby behavior until a supported MCLAG migration permits different forwarding

Explanation

Correct Answer

C:

The reported facts support this change rather than a general platform replacement. The team should enable the approved physical port and verify the intended access policy because an administratively disabled port cannot forward even with functional cable and endpoint. A suitable test confirms that the interface becomes operational and the authorized server receives network access.

Incorrect Answers

A:

The option addresses the separate situation where port speed and optics support vary across switch families and FortiSwitchOS versions. For this case, the more appropriate response is to enable the approved physical port and verify the intended access policy. For the Foxhaven managed-network provider, the direct corrective action is to enable the approved physical port and verify the intended access policy.

B:

The offered action is: Enable the approved SSID tagged VLANs on the FortiSwitch uplink while maintaining management access. It is associated with this separate technical condition: An access point may be reachable for management while client VLAN tags are filtered. The actual incident concerns a different dependency: An administratively disabled port cannot forward even with functional cable and endpoint. The corresponding change is: Enable the approved physical port and verify the intended access policy.

D:

The offered alternative is: Account for the split interface active and standby behavior until a supported MCLAG migration permits different forwarding. It addresses this separate failure mode: A FortiLink split interface may intentionally keep only one physical path active without MCLAG. In the current case, the observed mechanism is: An administratively disabled port cannot forward even with functional cable and endpoint. The keyed action, Enable the approved physical port and verify the intended access policy., targets that condition more directly.

Question 270

At the Foxhaven managed-network provider, a newly connected server cannot link because its FortiSwitch physical port was left administratively disabled. Which underlying issue most directly explains this situation?

  1. A speed or duplex mismatch can create retransmissions despite an illuminated link
  2. An administratively disabled port cannot forward even with functional cable and endpoint
  3. Untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation
  4. Unrestricted low-priority demand can fill shared switch buffers during contention

Explanation

Correct Answer

B:

The architectural weakness is that an administratively disabled port cannot forward even with functional cable and endpoint. It can be addressed through the controlled change to enable the approved physical port and verify the intended access policy.

Incorrect Answers

A:

The offered principle is: A speed or duplex mismatch can create retransmissions despite an illuminated link. In the source material it is associated with: A speed or duplex mismatch can create retransmissions despite an illuminated link. This case has a different controlling cause: An administratively disabled port cannot forward even with functional cable and endpoint. Its keyed mechanism is: An administratively disabled port cannot forward even with functional cable and endpoint.

C:

The offered principle is: Untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation. In the source material it is associated with: Untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation. This case has a different controlling cause: An administratively disabled port cannot forward even with functional cable and endpoint. Its keyed mechanism is: An administratively disabled port cannot forward even with functional cable and endpoint.

D:

Although unrestricted low-priority demand can fill shared switch buffers during contention, the presented symptoms do not support that as the primary cause; they indicate that an administratively disabled port cannot forward even with functional cable and endpoint. For the Foxhaven managed-network provider, the direct corrective action is to enable the approved physical port and verify the intended access policy.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests