McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 29

Question 280

At the Glenbrook data network services firm, one copper client has errors after technicians force duplex on one side while the other auto negotiates. Which setting or practice should be reviewed in future?

  1. Retest breakout support after transceiver or firmware upgrades
  2. Review SSID to VLAN mappings after wireless controller updates
  3. Monitor collision or CRC trends after physical changes
  4. Inspect membership and querier state after video system changes

Explanation

Correct Answer

C:

The team should monitor collision or CRC trends after physical changes. That recurring practice targets the same weakness, namely that a speed or duplex mismatch can create retransmissions despite an illuminated link.

Incorrect Answers

A:

Retest breakout support after transceiver or firmware upgrades is not the primary recurring safeguard for this problem. The team should monitor collision or CRC trends after physical changes. For the Glenbrook data network services firm, the direct corrective action is to use compatible supported duplex and auto-negotiation settings at both ends.

B:

Review SSID to VLAN mappings after wireless controller updates. That safeguard would help prevent recurrence of: An access point may be reachable for management while client VLAN tags are filtered. The risk being reviewed here is instead: A speed or duplex mismatch can create retransmissions despite an illuminated link. The matching ongoing control is: Monitor collision or CRC trends after physical changes.

D:

Inspect membership and querier state after video system changes. That safeguard would help prevent recurrence of: Without valid membership tracking multicast may be flooded to non-subscribers. The risk being reviewed here is instead: A speed or duplex mismatch can create retransmissions despite an illuminated link. The matching ongoing control is: Monitor collision or CRC trends after physical changes.

Question 281

At the Uptonbridge regional network integrator, a high speed FortiSwitch interface must serve several links but engineers configure split ports without validating cable and model support. Which corrective action best meets the requirement?

  1. Configure supported PoE allocation priorities according to business criticality
  2. Verify FortiSwitch model port breakout capability and use the supported split-port mode and optics
  3. Design a supported two-tier FortiLink topology with correct uplink roles and authorization order
  4. Apply supported protocol-based VLAN rules only after confirming hardware capability and required frame matches

Explanation

Correct Answer

B:

The primary failure mode is that not every physical port supports subdivision into the requested lanes and speeds. The proposed action directly fixes it by requiring the team to verify FortiSwitch model port breakout capability and use the supported split-port mode and optics; afterward, verify that all approved breakout child interfaces come up at their target speeds.

Incorrect Answers

A:

The option addresses the separate situation where default power allocation order may not protect the most important devices during shortage. For this case, the more appropriate response is to verify FortiSwitch model port breakout capability and use the supported split-port mode and optics. For the Uptonbridge regional network integrator, the direct corrective action is to verify FortiSwitch model port breakout capability and use the supported split-port mode and optics.

C:

Design a supported two-tier FortiLink topology with correct uplink roles and authorization order can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to verify FortiSwitch model port breakout capability and use the supported split-port mode and optics. For the Uptonbridge regional network integrator, the direct corrective action is to verify FortiSwitch model port breakout capability and use the supported split-port mode and optics.

D:

The offered alternative is: Apply supported protocol-based VLAN rules only after confirming hardware capability and required frame matches. It addresses this separate failure mode: Simple native VLAN handling cannot distinguish service traffic by defined protocol selectors. In the current case, the observed mechanism is: Not every physical port supports subdivision into the requested lanes and speeds. The keyed action, Verify FortiSwitch model port breakout capability and use the supported split-port mode and optics., targets that condition more directly.

Question 282

At the Uptonbridge regional network integrator, a high speed FortiSwitch interface must serve several links but engineers configure split ports without validating cable and model support. Which underlying issue most directly explains this situation?

  1. Not every physical port supports subdivision into the requested lanes and speeds
  2. Incompatible speed configuration can prevent stable physical link negotiation
  3. Overly broad strict priority classification can prevent lower queues receiving service
  4. Port labels may become stale when cables move and must be reconciled with observed neighbors

Explanation

Correct Answer

A:

The evidence indicates that not every physical port supports subdivision into the requested lanes and speeds. The appropriate response is to verify FortiSwitch model port breakout capability and use the supported split-port mode and optics and demonstrate that all approved breakout child interfaces come up at their target speeds.

Incorrect Answers

B:

Incompatible speed configuration can prevent stable physical link negotiation. That is not the mechanism that accounts for the stated failure at the Uptonbridge regional network integrator.

C:

The offered principle is: Overly broad strict priority classification can prevent lower queues receiving service. In the source material it is associated with: Overly broad strict priority classification can prevent lower queues receiving service. This case has a different controlling cause: Not every physical port supports subdivision into the requested lanes and speeds. Its keyed mechanism is: Not every physical port supports subdivision into the requested lanes and speeds.

D:

Although port labels may become stale when cables move and must be reconciled with observed neighbors, the presented symptoms do not support that as the primary cause; they indicate that not every physical port supports subdivision into the requested lanes and speeds. For the Uptonbridge regional network integrator, the direct corrective action is to verify FortiSwitch model port breakout capability and use the supported split-port mode and optics.

Question 283

At the Uptonbridge regional network integrator, a high speed FortiSwitch interface must serve several links but engineers configure split ports without validating cable and model support. What evidence would justify considering this concern addressed?

  1. The analyzer receives only the intended mirrored traffic with correct packet headers
  2. A route lookup chooses the approved path and a controlled failover selects backup
  3. All approved breakout child interfaces come up at their target speeds
  4. Test VLAN groups use their intended root uplinks without creating loops

Explanation

Correct Answer

C:

At the Uptonbridge regional network integrator, evidence that all approved breakout child interfaces come up at their target speeds directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

The analyzer receives only the intended mirrored traffic with correct packet headers. That result would test a control for this other failure: Ordinary switching does not clone unrelated transit traffic to a monitoring port. The question instead requires evidence for: Not every physical port supports subdivision into the requested lanes and speeds. The direct outcome to verify is: All approved breakout child interfaces come up at their target speeds.

B:

The offered observation is: A route lookup chooses the approved path and a controlled failover selects backup. It would support the separate mechanism: Configured intent may not match the route actually selected for forwarding. In this case the decisive dependency is: Not every physical port supports subdivision into the requested lanes and speeds. The original keyed verification is: All approved breakout child interfaces come up at their target speeds.

D:

The offered observation is: Test VLAN groups use their intended root uplinks without creating loops. It would support the separate mechanism: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. In this case the decisive dependency is: Not every physical port supports subdivision into the requested lanes and speeds. The original keyed verification is: All approved breakout child interfaces come up at their target speeds.

Question 284

At the Uptonbridge regional network integrator, a high speed FortiSwitch interface must serve several links but engineers configure split ports without validating cable and model support. How should the organization sustain the improvement?

  1. Recheck port speed after transceiver replacements
  2. Retest breakout support after transceiver or firmware upgrades
  3. Maintain VLAN gateway ownership and route inventories
  4. Document static link groups and verify both sides after hardware replacement

Explanation

Correct Answer

B:

For the Uptonbridge regional network integrator, this maintenance action preserves the fix: retest breakout support after transceiver or firmware upgrades. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Recheck port speed after transceiver replacements. Its technical scope concerns: Incompatible speed configuration can prevent stable physical link negotiation. This question asks how to sustain control over: Not every physical port supports subdivision into the requested lanes and speeds. The more targeted safeguard is: Retest breakout support after transceiver or firmware upgrades.

C:

That routine supports standalone inter vlan routing, but the relevant ongoing risk requires the team to retest breakout support after transceiver or firmware upgrades. For the Uptonbridge regional network integrator, the direct corrective action is to verify FortiSwitch model port breakout capability and use the supported split-port mode and optics.

D:

Document static link groups and verify both sides after hardware replacement. That safeguard would help prevent recurrence of: A peer that does not negotiate LACP cannot form a dynamic aggregated link. The risk being reviewed here is instead: Not every physical port supports subdivision into the requested lanes and speeds. The matching ongoing control is: Retest breakout support after transceiver or firmware upgrades.

Question 285

At the Juniperford multisite IT support team, a campus uplink is dark because its optical modules use incompatible wavelengths on opposite ends. Which approach best resolves the described issue?

  1. Configure a supported mirror source and destination or approved capture feature
  2. Remove unsafe BPDU filtering and restore protocol exchange on intended switch-to-switch links
  3. Enable the appropriate supported DHCP relay on its designated Layer 3 gateway and permit the required reachability
  4. Select a matched supported transceiver pair for the fiber medium and distance

Explanation

Correct Answer

D:

Select a matched supported transceiver pair for the fiber medium and distance is the best response because physical connector compatibility does not guarantee optical transmitter receiver compatibility. A focused validation would establish that both endpoints show acceptable receive power and stable forwarding.

Incorrect Answers

A:

Configure a supported mirror source and destination or approved capture feature can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to select a matched supported transceiver pair for the fiber medium and distance. For the Juniperford multisite IT support team, the direct corrective action is to select a matched supported transceiver pair for the fiber medium and distance.

B:

The offered action is: Remove unsafe BPDU filtering and restore protocol exchange on intended switch-to-switch links. It is associated with this separate technical condition: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The actual incident concerns a different dependency: Physical connector compatibility does not guarantee optical transmitter receiver compatibility. The corresponding change is: Select a matched supported transceiver pair for the fiber medium and distance.

C:

This alternative would be suitable where dHCP broadcasts do not cross routed interfaces without a relay or alternate server path. It does not by itself resolve the need to select a matched supported transceiver pair for the fiber medium and distance. For the Juniperford multisite IT support team, the direct corrective action is to select a matched supported transceiver pair for the fiber medium and distance.

Question 286

At the Juniperford multisite IT support team, a campus uplink is dark because its optical modules use incompatible wavelengths on opposite ends. Which explanation best accounts for the concern?

  1. Physical connector compatibility does not guarantee optical transmitter receiver compatibility
  2. Physical port faults cannot be distinguished from configuration causes by restart alone
  3. A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device
  4. Different MSTP region parameters change how peers interpret instances and topology

Explanation

Correct Answer

A:

The strongest explanation is that physical connector compatibility does not guarantee optical transmitter receiver compatibility. This accounts for the outcome and supports the action to select a matched supported transceiver pair for the fiber medium and distance.

Incorrect Answers

B:

Although physical port faults cannot be distinguished from configuration causes by restart alone, the presented symptoms do not support that as the primary cause; they indicate that physical connector compatibility does not guarantee optical transmitter receiver compatibility. For the Juniperford multisite IT support team, the direct corrective action is to select a matched supported transceiver pair for the fiber medium and distance.

C:

The offered principle is: A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. In the source material it is associated with: A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. This case has a different controlling cause: Physical connector compatibility does not guarantee optical transmitter receiver compatibility. Its keyed mechanism is: Physical connector compatibility does not guarantee optical transmitter receiver compatibility.

D:

Different MSTP region parameters change how peers interpret instances and topology. That may occur elsewhere, but the evidence at the Juniperford multisite IT support team instead points to the fact that physical connector compatibility does not guarantee optical transmitter receiver compatibility.

Question 287

At the Juniperford multisite IT support team, a campus uplink is dark because its optical modules use incompatible wavelengths on opposite ends. Which test result best shows the requirement is met?

  1. Both endpoints show acceptable receive power and stable forwarding
  2. Optical diagnostics and error rates remain within specified range under load
  3. Authorized subnet traffic is seen in the correct FortiGate firewall policy logs
  4. Test VLAN groups use their intended root uplinks without creating loops

Explanation

Correct Answer

A:

At the Juniperford multisite IT support team, evidence that both endpoints show acceptable receive power and stable forwarding directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

B:

The offered observation is: Optical diagnostics and error rates remain within specified range under load. It would support the separate mechanism: Excess attenuation can corrupt frames even when physical link occasionally remains up. In this case the decisive dependency is: Physical connector compatibility does not guarantee optical transmitter receiver compatibility. The original keyed verification is: Both endpoints show acceptable receive power and stable forwarding.

C:

Authorized subnet traffic is seen in the correct FortiGate firewall policy logs. That result would test a control for this other failure: Local bypass routing can defeat the approved security inspection architecture. The question instead requires evidence for: Physical connector compatibility does not guarantee optical transmitter receiver compatibility. The direct outcome to verify is: Both endpoints show acceptable receive power and stable forwarding.

D:

At the Juniperford multisite IT support team, a result about mstp instance distribution would not show that the team corrected the failure where physical connector compatibility does not guarantee optical transmitter receiver compatibility.

Question 288

At the Juniperford multisite IT support team, a campus uplink is dark because its optical modules use incompatible wavelengths on opposite ends. Which ongoing control best prevents this issue from recurring?

  1. Monitor repeated violations rather than clearing the state blindly
  2. Compare uplink profiles with an approved baseline before cabling changes
  3. Audit management VLAN routing and permissions during new site turnups
  4. Maintain a supported optics and fiber inventory

Explanation

Correct Answer

D:

This control works beyond the initial remediation because it requires the team to maintain a supported optics and fiber inventory.

Incorrect Answers

A:

That routine supports port error-disable recovery, but the relevant ongoing risk requires the team to maintain a supported optics and fiber inventory. For the Juniperford multisite IT support team, the direct corrective action is to select a matched supported transceiver pair for the fiber medium and distance.

B:

Compare uplink profiles with an approved baseline before cabling changes. That safeguard would help prevent recurrence of: An access-style port assignment can discard tagged traffic expected by upstream switches. The risk being reviewed here is instead: Physical connector compatibility does not guarantee optical transmitter receiver compatibility. The matching ongoing control is: Maintain a supported optics and fiber inventory.

C:

Audit management VLAN routing and permissions during new site turnups is not the primary recurring safeguard for this problem. The team should maintain a supported optics and fiber inventory. For the Juniperford multisite IT support team, the direct corrective action is to select a matched supported transceiver pair for the fiber medium and distance.

Question 289

At the Brookfield campus infrastructure group, an inter-building single-mode fiber path has growing errors due to receive power near its minimum threshold. Which implementation choice best addresses the situation?

  1. Run supported cable diagnostics and repair damaged or miswired copper pairs
  2. Calculate optical loss and select approved optics with appropriate supported reach
  3. Apply the appropriate supported edge-port behavior to true endpoint-only interfaces
  4. Create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway

Explanation

Correct Answer

B:

Calculate optical loss and select approved optics with appropriate supported reach is the best response because excess attenuation can corrupt frames even when physical link occasionally remains up. A focused validation would establish that optical diagnostics and error rates remain within specified range under load.

Incorrect Answers

A:

This alternative would be suitable where gigabit copper Ethernet needs correctly functioning cable pairs and termination. It does not by itself resolve the need to calculate optical loss and select approved optics with appropriate supported reach. For the Brookfield campus infrastructure group, the direct corrective action is to calculate optical loss and select approved optics with appropriate supported reach.

C:

The option addresses the separate situation where a non-edge STP transition may delay client connectivity even when no downstream bridge exists. For this case, the more appropriate response is to calculate optical loss and select approved optics with appropriate supported reach. For the Brookfield campus infrastructure group, the direct corrective action is to calculate optical loss and select approved optics with appropriate supported reach.

D:

The offered alternative is: Create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway. It addresses this separate failure mode: A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. In the current case, the observed mechanism is: Excess attenuation can corrupt frames even when physical link occasionally remains up. The keyed action, Calculate optical loss and select approved optics with appropriate supported reach., targets that condition more directly.

Question 290

At the Brookfield campus infrastructure group, an inter-building single-mode fiber path has growing errors due to receive power near its minimum threshold. What risk should the team identify as the primary issue?

  1. Incompatible speed configuration can prevent stable physical link negotiation
  2. Mismatched LACP negotiation can exclude ports from the intended logical trunk
  3. Phones may fall into the wrong subnet when tagged voice frames are not allowed on the port
  4. Excess attenuation can corrupt frames even when physical link occasionally remains up

Explanation

Correct Answer

D:

The architectural weakness is that excess attenuation can corrupt frames even when physical link occasionally remains up. It can be addressed through the controlled change to calculate optical loss and select approved optics with appropriate supported reach.

Incorrect Answers

A:

The offered action is: Incompatible speed configuration can prevent stable physical link negotiation. It is associated with this separate technical condition: Incompatible speed configuration can prevent stable physical link negotiation. The actual incident concerns a different dependency: Excess attenuation can corrupt frames even when physical link occasionally remains up. The corresponding change is: Excess attenuation can corrupt frames even when physical link occasionally remains up.

B:

Mismatched LACP negotiation can exclude ports from the intended logical trunk. That may occur elsewhere, but the evidence at the Brookfield campus infrastructure group instead points to the fact that excess attenuation can corrupt frames even when physical link occasionally remains up.

C:

The offered alternative is: Phones may fall into the wrong subnet when tagged voice frames are not allowed on the port. It addresses this separate failure mode: Phones may fall into the wrong subnet when tagged voice frames are not allowed on the port. In the current case, the observed mechanism is: Excess attenuation can corrupt frames even when physical link occasionally remains up. The keyed action, Excess attenuation can corrupt frames even when physical link occasionally remains up., targets that condition more directly.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests