McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 28

Question 270

At the Foxhaven managed-network provider, a newly connected server cannot link because its FortiSwitch physical port was left administratively disabled. Which underlying issue most directly explains this situation?

  1. A speed or duplex mismatch can create retransmissions despite an illuminated link
  2. An administratively disabled port cannot forward even with functional cable and endpoint
  3. Untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation
  4. Unrestricted low-priority demand can fill shared switch buffers during contention

Explanation

Correct Answer

B:

The architectural weakness is that an administratively disabled port cannot forward even with functional cable and endpoint. It can be addressed through the controlled change to enable the approved physical port and verify the intended access policy.

Incorrect Answers

A:

The offered principle is: A speed or duplex mismatch can create retransmissions despite an illuminated link. In the source material it is associated with: A speed or duplex mismatch can create retransmissions despite an illuminated link. This case has a different controlling cause: An administratively disabled port cannot forward even with functional cable and endpoint. Its keyed mechanism is: An administratively disabled port cannot forward even with functional cable and endpoint.

C:

The offered principle is: Untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation. In the source material it is associated with: Untagged frames enter the configured native VLAN rather than the VLAN assumed by the workstation. This case has a different controlling cause: An administratively disabled port cannot forward even with functional cable and endpoint. Its keyed mechanism is: An administratively disabled port cannot forward even with functional cable and endpoint.

D:

Although unrestricted low-priority demand can fill shared switch buffers during contention, the presented symptoms do not support that as the primary cause; they indicate that an administratively disabled port cannot forward even with functional cable and endpoint. For the Foxhaven managed-network provider, the direct corrective action is to enable the approved physical port and verify the intended access policy.

Question 271

At the Foxhaven managed-network provider, a newly connected server cannot link because its FortiSwitch physical port was left administratively disabled. What evidence would justify considering this concern addressed?

  1. A controlled power limit preserves critical phones and sheds approved lower-priority loads
  2. The interface becomes operational and the authorized server receives network access
  3. A mixed-load test preserves protected video quality and acceptable best-effort throughput
  4. Both switches discover each other across the approved Layer 2 bridge

Explanation

Correct Answer

B:

The intended correction is to enable the approved physical port and verify the intended access policy. The decisive verification is that the interface becomes operational and the authorized server receives network access, rather than only confirming configuration was saved.

Incorrect Answers

A:

A controlled power limit preserves critical phones and sheds approved lower-priority loads. That result would test a control for this other failure: Default power allocation order may not protect the most important devices during shortage. The question instead requires evidence for: An administratively disabled port cannot forward even with functional cable and endpoint. The direct outcome to verify is: The interface becomes operational and the authorized server receives network access.

C:

A mixed-load test preserves protected video quality and acceptable best-effort throughput. That result would test a control for this other failure: Overly broad strict priority classification can prevent lower queues receiving service. The question instead requires evidence for: An administratively disabled port cannot forward even with functional cable and endpoint. The direct outcome to verify is: The interface becomes operational and the authorized server receives network access.

D:

The offered observation is: Both switches discover each other across the approved Layer 2 bridge. It would support the separate mechanism: A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. In this case the decisive dependency is: An administratively disabled port cannot forward even with functional cable and endpoint. The original keyed verification is: The interface becomes operational and the authorized server receives network access.

Question 272

At the Foxhaven managed-network provider, a newly connected server cannot link because its FortiSwitch physical port was left administratively disabled. How should the organization sustain the improvement?

  1. Track unused-port shutdown and authorization changes
  2. Reevaluate PoE priority after endpoint inventory changes
  3. Maintain one reviewed VLAN inventory for all sites
  4. Maintain an inventory of endpoint discovery and policy capabilities

Explanation

Correct Answer

A:

The team should track unused-port shutdown and authorization changes. That recurring practice targets the same weakness, namely that an administratively disabled port cannot forward even with functional cable and endpoint.

Incorrect Answers

B:

Reevaluate PoE priority after endpoint inventory changes. That safeguard would help prevent recurrence of: Default power allocation order may not protect the most important devices during shortage. The risk being reviewed here is instead: An administratively disabled port cannot forward even with functional cable and endpoint. The matching ongoing control is: Track unused-port shutdown and authorization changes.

C:

That routine supports vlan identifier inconsistency, but the relevant ongoing risk requires the team to track unused-port shutdown and authorization changes. For the Foxhaven managed-network provider, the direct corrective action is to enable the approved physical port and verify the intended access policy.

D:

Maintain an inventory of endpoint discovery and policy capabilities. That safeguard would help prevent recurrence of: Ordinary LLDP support does not prove an endpoint applies LLDP-MED network policy TLVs. The risk being reviewed here is instead: An administratively disabled port cannot forward even with functional cable and endpoint. The matching ongoing control is: Track unused-port shutdown and authorization changes.

Question 273

At the Umberfield branch IT department, a fiber connection flaps after one end is forced to an unsupported interface speed. Which approach best resolves the described issue?

  1. Enable supported storm control on the affected access edge with appropriate thresholds
  2. Align supported speed and media settings on both link endpoints
  3. Verify the correct FortiLink discovery-enabled port or manually configure the supported ISL role
  4. Examine STP states and the recently added links before correcting the actual loop

Explanation

Correct Answer

B:

For the Umberfield branch IT department, the appropriate correction is to align supported speed and media settings on both link endpoints. The decisive reason is that incompatible speed configuration can prevent stable physical link negotiation; acceptance evidence is that the link operates at the agreed speed and error counters remain stable.

Incorrect Answers

A:

Enable supported storm control on the affected access edge with appropriate thresholds can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to align supported speed and media settings on both link endpoints. For the Umberfield branch IT department, the direct corrective action is to align supported speed and media settings on both link endpoints.

C:

This alternative would be suitable where a physical link on the wrong port role does not necessarily join the managed FortiSwitch topology. It does not by itself resolve the need to align supported speed and media settings on both link endpoints. For the Umberfield branch IT department, the direct corrective action is to align supported speed and media settings on both link endpoints.

D:

Examine STP states and the recently added links before correcting the actual loop addresses a different kind of problem: an uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. Here the reported weakness is that incompatible speed configuration can prevent stable physical link negotiation. For the Umberfield branch IT department, the direct corrective action is to align supported speed and media settings on both link endpoints.

Question 274

At the Umberfield branch IT department, a fiber connection flaps after one end is forced to an unsupported interface speed. Which explanation best accounts for the concern?

  1. Incompatible speed configuration can prevent stable physical link negotiation
  2. A speed or duplex mismatch can create retransmissions despite an illuminated link
  3. A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state
  4. Different MSTP region parameters change how peers interpret instances and topology

Explanation

Correct Answer

A:

The strongest explanation is that incompatible speed configuration can prevent stable physical link negotiation. This accounts for the outcome and supports the action to align supported speed and media settings on both link endpoints.

Incorrect Answers

B:

Although a speed or duplex mismatch can create retransmissions despite an illuminated link, the presented symptoms do not support that as the primary cause; they indicate that incompatible speed configuration can prevent stable physical link negotiation. For the Umberfield branch IT department, the direct corrective action is to align supported speed and media settings on both link endpoints.

C:

The offered principle is: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. In the source material it is associated with: A phone that depends on network policy TLVs cannot infer a dedicated voice VLAN from ordinary Ethernet link state. This case has a different controlling cause: Incompatible speed configuration can prevent stable physical link negotiation. Its keyed mechanism is: Incompatible speed configuration can prevent stable physical link negotiation.

D:

Different MSTP region parameters change how peers interpret instances and topology. That may occur elsewhere, but the evidence at the Umberfield branch IT department instead points to the fact that incompatible speed configuration can prevent stable physical link negotiation.

Question 275

At the Umberfield branch IT department, a fiber connection flaps after one end is forced to an unsupported interface speed. Which test result best shows the requirement is met?

  1. The link operates at the agreed speed and error counters remain stable
  2. A targeted diagnostic identifies the failing component and forwarding recovers after repair
  3. Multiple independent test flows use expected available next hops without reordering
  4. A validation set passes each approved tagged VLAN without forwarding an unapproved one

Explanation

Correct Answer

A:

At the Umberfield branch IT department, evidence that the link operates at the agreed speed and error counters remain stable directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

B:

The offered observation is: A targeted diagnostic identifies the failing component and forwarding recovers after repair. It would support the separate mechanism: Physical port faults cannot be distinguished from configuration causes by restart alone. In this case the decisive dependency is: Incompatible speed configuration can prevent stable physical link negotiation. The original keyed verification is: The link operates at the agreed speed and error counters remain stable.

C:

Multiple independent test flows use expected available next hops without reordering. That result would test a control for this other failure: Equal-cost multipath may use a flow hash rather than distributing consecutive packets across every path. The question instead requires evidence for: Incompatible speed configuration can prevent stable physical link negotiation. The direct outcome to verify is: The link operates at the agreed speed and error counters remain stable.

D:

At the Umberfield branch IT department, a result about vlan membership on uplink would not show that the team corrected the failure where incompatible speed configuration can prevent stable physical link negotiation.

Question 276

At the Umberfield branch IT department, a fiber connection flaps after one end is forced to an unsupported interface speed. Which ongoing control best prevents this issue from recurring?

  1. Retest breakout support after transceiver or firmware upgrades
  2. Recheck port speed after transceiver replacements
  3. Review telephony network policies when firmware changes
  4. Review STP costs after speed and optics upgrades

Explanation

Correct Answer

B:

The needed prevention is to recheck port speed after transceiver replacements. It directly sustains the original change to align supported speed and media settings on both link endpoints.

Incorrect Answers

A:

That routine supports split port breakout prerequisites, but the relevant ongoing risk requires the team to recheck port speed after transceiver replacements. For the Umberfield branch IT department, the direct corrective action is to align supported speed and media settings on both link endpoints.

C:

Review telephony network policies when firmware changes is not the primary recurring safeguard for this problem. The team should recheck port speed after transceiver replacements. For the Umberfield branch IT department, the direct corrective action is to align supported speed and media settings on both link endpoints.

D:

Review STP costs after speed and optics upgrades. That safeguard would help prevent recurrence of: STP chooses paths from bridge and port metrics rather than business labels. The risk being reviewed here is instead: Incompatible speed configuration can prevent stable physical link negotiation. The matching ongoing control is: Recheck port speed after transceiver replacements.

Question 277

At the Glenbrook data network services firm, one copper client has errors after technicians force duplex on one side while the other auto negotiates. Which implementation choice best addresses the situation?

  1. Verify FortiSwitch model port breakout capability and use the supported split-port mode and optics
  2. Validate the FortiSwitch port role and supported ISL discovery or configured inter-switch trunk
  3. Apply the appropriate supported edge-port behavior to true endpoint-only interfaces
  4. Use compatible supported duplex and auto-negotiation settings at both ends

Explanation

Correct Answer

D:

The primary failure mode is that a speed or duplex mismatch can create retransmissions despite an illuminated link. The proposed action directly fixes it by requiring the team to use compatible supported duplex and auto-negotiation settings at both ends; afterward, verify that the connection passes an error-free throughput test.

Incorrect Answers

A:

This alternative would be suitable where not every physical port supports subdivision into the requested lanes and speeds. It does not by itself resolve the need to use compatible supported duplex and auto-negotiation settings at both ends. For the Glenbrook data network services firm, the direct corrective action is to use compatible supported duplex and auto-negotiation settings at both ends.

B:

Validate the FortiSwitch port role and supported ISL discovery or configured inter-switch trunk addresses a different kind of problem: a downstream switch cannot be discovered if its inter-switch connection lacks the required FortiLink control path. Here the reported weakness is that a speed or duplex mismatch can create retransmissions despite an illuminated link. For the Glenbrook data network services firm, the direct corrective action is to use compatible supported duplex and auto-negotiation settings at both ends.

C:

The option addresses the separate situation where a non-edge STP transition may delay client connectivity even when no downstream bridge exists. For this case, the more appropriate response is to use compatible supported duplex and auto-negotiation settings at both ends. For the Glenbrook data network services firm, the direct corrective action is to use compatible supported duplex and auto-negotiation settings at both ends.

Question 278

At the Glenbrook data network services firm, one copper client has errors after technicians force duplex on one side while the other auto negotiates. What risk should the team identify as the primary issue?

  1. Ordinary switching does not clone unrelated transit traffic to a monitoring port
  2. Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity
  3. A speed or duplex mismatch can create retransmissions despite an illuminated link
  4. An intermediary can block discovery advertisements even when Ethernet connectivity works

Explanation

Correct Answer

C:

The evidence indicates that a speed or duplex mismatch can create retransmissions despite an illuminated link. The appropriate response is to use compatible supported duplex and auto-negotiation settings at both ends and demonstrate that the connection passes an error-free throughput test.

Incorrect Answers

A:

The offered action is: Ordinary switching does not clone unrelated transit traffic to a monitoring port. It is associated with this separate technical condition: Ordinary switching does not clone unrelated transit traffic to a monitoring port. The actual incident concerns a different dependency: A speed or duplex mismatch can create retransmissions despite an illuminated link. The corresponding change is: A speed or duplex mismatch can create retransmissions despite an illuminated link.

B:

Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. That may occur elsewhere, but the evidence at the Glenbrook data network services firm instead points to the fact that a speed or duplex mismatch can create retransmissions despite an illuminated link.

D:

An intermediary can block discovery advertisements even when Ethernet connectivity works. That is not the mechanism that accounts for the stated failure at the Glenbrook data network services firm.

Question 279

At the Glenbrook data network services firm, one copper client has errors after technicians force duplex on one side while the other auto negotiates. What is the strongest acceptance test for this change?

  1. The link operates at the agreed speed and error counters remain stable
  2. A capture at the far end shows approved DSCP values preserved
  3. A boundary failure test reconverges safely with documented root behavior
  4. The connection passes an error-free throughput test

Explanation

Correct Answer

D:

The intended correction is to use compatible supported duplex and auto-negotiation settings at both ends. The decisive verification is that the connection passes an error-free throughput test, rather than only confirming configuration was saved.

Incorrect Answers

A:

The link operates at the agreed speed and error counters remain stable. That result would test a control for this other failure: Incompatible speed configuration can prevent stable physical link negotiation. The question instead requires evidence for: A speed or duplex mismatch can create retransmissions despite an illuminated link. The direct outcome to verify is: The connection passes an error-free throughput test.

B:

At the Glenbrook data network services firm, a result about egress dscp preservation would not show that the team corrected the failure where a speed or duplex mismatch can create retransmissions despite an illuminated link.

C:

A boundary failure test reconverges safely with documented root behavior. That result would test a control for this other failure: Different STP variants can interoperate at boundaries without sharing every internal instance decision. The question instead requires evidence for: A speed or duplex mismatch can create retransmissions despite an illuminated link. The direct outcome to verify is: The connection passes an error-free throughput test.

Question 280

At the Glenbrook data network services firm, one copper client has errors after technicians force duplex on one side while the other auto negotiates. Which setting or practice should be reviewed in future?

  1. Retest breakout support after transceiver or firmware upgrades
  2. Review SSID to VLAN mappings after wireless controller updates
  3. Monitor collision or CRC trends after physical changes
  4. Inspect membership and querier state after video system changes

Explanation

Correct Answer

C:

The team should monitor collision or CRC trends after physical changes. That recurring practice targets the same weakness, namely that a speed or duplex mismatch can create retransmissions despite an illuminated link.

Incorrect Answers

A:

Retest breakout support after transceiver or firmware upgrades is not the primary recurring safeguard for this problem. The team should monitor collision or CRC trends after physical changes. For the Glenbrook data network services firm, the direct corrective action is to use compatible supported duplex and auto-negotiation settings at both ends.

B:

Review SSID to VLAN mappings after wireless controller updates. That safeguard would help prevent recurrence of: An access point may be reachable for management while client VLAN tags are filtered. The risk being reviewed here is instead: A speed or duplex mismatch can create retransmissions despite an illuminated link. The matching ongoing control is: Monitor collision or CRC trends after physical changes.

D:

Inspect membership and querier state after video system changes. That safeguard would help prevent recurrence of: Without valid membership tracking multicast may be flooded to non-subscribers. The risk being reviewed here is instead: A speed or duplex mismatch can create retransmissions despite an illuminated link. The matching ongoing control is: Monitor collision or CRC trends after physical changes.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests