McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 30

Question 290

At the Brookfield campus infrastructure group, an inter-building single-mode fiber path has growing errors due to receive power near its minimum threshold. What risk should the team identify as the primary issue?

  1. Incompatible speed configuration can prevent stable physical link negotiation
  2. Mismatched LACP negotiation can exclude ports from the intended logical trunk
  3. Phones may fall into the wrong subnet when tagged voice frames are not allowed on the port
  4. Excess attenuation can corrupt frames even when physical link occasionally remains up

Explanation

Correct Answer

D:

The architectural weakness is that excess attenuation can corrupt frames even when physical link occasionally remains up. It can be addressed through the controlled change to calculate optical loss and select approved optics with appropriate supported reach.

Incorrect Answers

A:

The offered action is: Incompatible speed configuration can prevent stable physical link negotiation. It is associated with this separate technical condition: Incompatible speed configuration can prevent stable physical link negotiation. The actual incident concerns a different dependency: Excess attenuation can corrupt frames even when physical link occasionally remains up. The corresponding change is: Excess attenuation can corrupt frames even when physical link occasionally remains up.

B:

Mismatched LACP negotiation can exclude ports from the intended logical trunk. That may occur elsewhere, but the evidence at the Brookfield campus infrastructure group instead points to the fact that excess attenuation can corrupt frames even when physical link occasionally remains up.

C:

The offered alternative is: Phones may fall into the wrong subnet when tagged voice frames are not allowed on the port. It addresses this separate failure mode: Phones may fall into the wrong subnet when tagged voice frames are not allowed on the port. In the current case, the observed mechanism is: Excess attenuation can corrupt frames even when physical link occasionally remains up. The keyed action, Excess attenuation can corrupt frames even when physical link occasionally remains up., targets that condition more directly.

Question 291

At the Brookfield campus infrastructure group, an inter-building single-mode fiber path has growing errors due to receive power near its minimum threshold. What is the strongest acceptance test for this change?

  1. Optical diagnostics and error rates remain within specified range under load
  2. A targeted diagnostic identifies the failing component and forwarding recovers after repair
  3. A traceroute follows the intended next hop and reaches the remote destination
  4. Tagged test traffic enters the intended egress queue under load

Explanation

Correct Answer

A:

Because excess attenuation can corrupt frames even when physical link occasionally remains up, the required evidence must show that optical diagnostics and error rates remain within specified range under load. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Brookfield campus infrastructure group, a result about loopback test and port health would not show that the team corrected the failure where excess attenuation can corrupt frames even when physical link occasionally remains up.

C:

A traceroute follows the intended next hop and reaches the remote destination. That result would test a control for this other failure: A route pointing at an unreachable neighbor cannot forward outside connected subnets. The question instead requires evidence for: Excess attenuation can corrupt frames even when physical link occasionally remains up. The direct outcome to verify is: Optical diagnostics and error rates remain within specified range under load.

D:

The offered observation is: Tagged test traffic enters the intended egress queue under load. It would support the separate mechanism: An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. In this case the decisive dependency is: Excess attenuation can corrupt frames even when physical link occasionally remains up. The original keyed verification is: Optical diagnostics and error rates remain within specified range under load.

Question 292

At the Brookfield campus infrastructure group, an inter-building single-mode fiber path has growing errors due to receive power near its minimum threshold. Which setting or practice should be reviewed in future?

  1. Monitor PoE headroom as devices are added
  2. Test discovery paths before introducing inline desk devices
  3. Trend optical receive power across long links
  4. Maintain VLAN gateway ownership and route inventories

Explanation

Correct Answer

C:

The team should trend optical receive power across long links. That recurring practice targets the same weakness, namely that excess attenuation can corrupt frames even when physical link occasionally remains up.

Incorrect Answers

A:

Monitor PoE headroom as devices are added is not the primary recurring safeguard for this problem. The team should trend optical receive power across long links. For the Brookfield campus infrastructure group, the direct corrective action is to calculate optical loss and select approved optics with appropriate supported reach.

B:

Test discovery paths before introducing inline desk devices. That safeguard would help prevent recurrence of: An intermediary can block discovery advertisements even when Ethernet connectivity works. The risk being reviewed here is instead: Excess attenuation can corrupt frames even when physical link occasionally remains up. The matching ongoing control is: Trend optical receive power across long links.

D:

Maintain VLAN gateway ownership and route inventories. That safeguard would help prevent recurrence of: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. The risk being reviewed here is instead: Excess attenuation can corrupt frames even when physical link occasionally remains up. The matching ongoing control is: Trend optical receive power across long links.

Question 293

At the Jasperfield network security team, a desk port negotiates 100 Mbps instead of expected 1 Gbps after a patch-panel move. Which corrective action best meets the requirement?

  1. Enable supported storm control on the affected access edge with appropriate thresholds
  2. Use supported private VLAN controls or equivalent enforced isolation while preserving permitted uplinks
  3. Run supported cable diagnostics and repair damaged or miswired copper pairs
  4. Account for the split interface active and standby behavior until a supported MCLAG migration permits different forwarding

Explanation

Correct Answer

C:

The reported facts support this change rather than a general platform replacement. The team should run supported cable diagnostics and repair damaged or miswired copper pairs because gigabit copper Ethernet needs correctly functioning cable pairs and termination. A suitable test confirms that the corrected connection negotiates the intended speed without FCS errors.

Incorrect Answers

A:

The option addresses the separate situation where excess broadcasts can consume shared switching bandwidth and CPU resources. For this case, the more appropriate response is to run supported cable diagnostics and repair damaged or miswired copper pairs. For the Jasperfield network security team, the direct corrective action is to run supported cable diagnostics and repair damaged or miswired copper pairs.

B:

The offered action is: Use supported private VLAN controls or equivalent enforced isolation while preserving permitted uplinks. It is associated with this separate technical condition: Putting endpoints in the same ordinary VLAN permits direct Layer 2 communication unless isolation is configured. The actual incident concerns a different dependency: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. The corresponding change is: Run supported cable diagnostics and repair damaged or miswired copper pairs.

D:

The offered alternative is: Account for the split interface active and standby behavior until a supported MCLAG migration permits different forwarding. It addresses this separate failure mode: A FortiLink split interface may intentionally keep only one physical path active without MCLAG. In the current case, the observed mechanism is: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. The keyed action, Run supported cable diagnostics and repair damaged or miswired copper pairs., targets that condition more directly.

Question 294

At the Jasperfield network security team, a desk port negotiates 100 Mbps instead of expected 1 Gbps after a patch-panel move. Which underlying issue most directly explains this situation?

  1. Not every physical port supports subdivision into the requested lanes and speeds
  2. Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop
  3. Gigabit copper Ethernet needs correctly functioning cable pairs and termination
  4. Link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts

Explanation

Correct Answer

C:

The strongest explanation is that gigabit copper Ethernet needs correctly functioning cable pairs and termination. This accounts for the outcome and supports the action to run supported cable diagnostics and repair damaged or miswired copper pairs.

Incorrect Answers

A:

The offered principle is: Not every physical port supports subdivision into the requested lanes and speeds. In the source material it is associated with: Not every physical port supports subdivision into the requested lanes and speeds. This case has a different controlling cause: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. Its keyed mechanism is: Gigabit copper Ethernet needs correctly functioning cable pairs and termination.

B:

Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. That is not the mechanism that accounts for the stated failure at the Jasperfield network security team.

D:

Although link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts, the presented symptoms do not support that as the primary cause; they indicate that gigabit copper Ethernet needs correctly functioning cable pairs and termination. For the Jasperfield network security team, the direct corrective action is to run supported cable diagnostics and repair damaged or miswired copper pairs.

Question 295

At the Jasperfield network security team, a desk port negotiates 100 Mbps instead of expected 1 Gbps after a patch-panel move. What evidence would justify considering this concern addressed?

  1. The corrected connection negotiates the intended speed without FCS errors
  2. A controlled power limit preserves critical phones and sheds approved lower-priority loads
  3. A ring failure and restoration complete without broadcast storms or authorization loss
  4. Multiple independent test flows use expected available next hops without reordering

Explanation

Correct Answer

A:

This tests the real business behavior: the corrected connection negotiates the intended speed without FCS errors. It specifically checks whether the risk that gigabit copper Ethernet needs correctly functioning cable pairs and termination has been reduced.

Incorrect Answers

B:

The offered observation is: A controlled power limit preserves critical phones and sheds approved lower-priority loads. It would support the separate mechanism: Default power allocation order may not protect the most important devices during shortage. In this case the decisive dependency is: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. The original keyed verification is: The corrected connection negotiates the intended speed without FCS errors.

C:

A ring failure and restoration complete without broadcast storms or authorization loss. That result would test a control for this other failure: Redundant physical links need controlled forwarding to prevent Layer 2 loops. The question instead requires evidence for: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. The direct outcome to verify is: The corrected connection negotiates the intended speed without FCS errors.

D:

The offered observation is: Multiple independent test flows use expected available next hops without reordering. It would support the separate mechanism: Equal-cost multipath may use a flow hash rather than distributing consecutive packets across every path. In this case the decisive dependency is: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. The original keyed verification is: The corrected connection negotiates the intended speed without FCS errors.

Question 296

At the Jasperfield network security team, a desk port negotiates 100 Mbps instead of expected 1 Gbps after a patch-panel move. How should the organization sustain the improvement?

  1. Track unused-port shutdown and authorization changes
  2. Retest patch leads during closet maintenance
  3. Reconcile neighbor inventories during scheduled patch-panel audits
  4. Audit switch gateway changes for unintended firewall bypass

Explanation

Correct Answer

B:

For the Jasperfield network security team, this maintenance action preserves the fix: retest patch leads during closet maintenance. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Track unused-port shutdown and authorization changes. Its technical scope concerns: An administratively disabled port cannot forward even with functional cable and endpoint. This question asks how to sustain control over: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. The more targeted safeguard is: Retest patch leads during closet maintenance.

C:

That routine supports lldp neighbor inventory mismatch, but the relevant ongoing risk requires the team to retest patch leads during closet maintenance. For the Jasperfield network security team, the direct corrective action is to run supported cable diagnostics and repair damaged or miswired copper pairs.

D:

Audit switch gateway changes for unintended firewall bypass. That safeguard would help prevent recurrence of: Local bypass routing can defeat the approved security inspection architecture. The risk being reviewed here is instead: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. The matching ongoing control is: Retest patch leads during closet maintenance.

Question 297

At the Westhaven managed-network provider, several new IP cameras power cycle because available switch PoE watts are exhausted. Which approach best resolves the described issue?

  1. Enable supported storm control on the affected access edge with appropriate thresholds
  2. Verify LLDP-MED support and use an approved alternate assignment method for devices without that capability
  3. Map approved 802.1p CoS priorities to supported FortiSwitch traffic classes and egress queues
  4. Compare per-port class demand and total available PoE capacity and adjust hardware or allocations

Explanation

Correct Answer

D:

Compare per-port class demand and total available PoE capacity and adjust hardware or allocations is the best response because an available Ethernet port does not mean the power supply has spare PoE capacity. A focused validation would establish that all authorized cameras stay online under peak simultaneous load.

Incorrect Answers

A:

Enable supported storm control on the affected access edge with appropriate thresholds can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to compare per-port class demand and total available PoE capacity and adjust hardware or allocations. For the Westhaven managed-network provider, the direct corrective action is to compare per-port class demand and total available PoE capacity and adjust hardware or allocations.

B:

The offered action is: Verify LLDP-MED support and use an approved alternate assignment method for devices without that capability. It is associated with this separate technical condition: Ordinary LLDP support does not prove an endpoint applies LLDP-MED network policy TLVs. The actual incident concerns a different dependency: An available Ethernet port does not mean the power supply has spare PoE capacity. The corresponding change is: Compare per-port class demand and total available PoE capacity and adjust hardware or allocations.

C:

This alternative would be suitable where an 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. It does not by itself resolve the need to compare per-port class demand and total available PoE capacity and adjust hardware or allocations. For the Westhaven managed-network provider, the direct corrective action is to compare per-port class demand and total available PoE capacity and adjust hardware or allocations.

Question 298

At the Westhaven managed-network provider, several new IP cameras power cycle because available switch PoE watts are exhausted. Which explanation best accounts for the concern?

  1. Port speed and optics support vary across switch families and FortiSwitchOS versions
  2. A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated
  3. A FortiLink split interface may intentionally keep only one physical path active without MCLAG
  4. An available Ethernet port does not mean the power supply has spare PoE capacity

Explanation

Correct Answer

D:

This identifies the root issue: an available Ethernet port does not mean the power supply has spare PoE capacity. At the Westhaven managed-network provider, the team should therefore compare per-port class demand and total available PoE capacity and adjust hardware or allocations.

Incorrect Answers

A:

The offered principle is: Port speed and optics support vary across switch families and FortiSwitchOS versions. In the source material it is associated with: Port speed and optics support vary across switch families and FortiSwitchOS versions. This case has a different controlling cause: An available Ethernet port does not mean the power supply has spare PoE capacity. Its keyed mechanism is: An available Ethernet port does not mean the power supply has spare PoE capacity.

B:

Although a shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated, the presented symptoms do not support that as the primary cause; they indicate that an available Ethernet port does not mean the power supply has spare PoE capacity. For the Westhaven managed-network provider, the direct corrective action is to compare per-port class demand and total available PoE capacity and adjust hardware or allocations.

C:

The offered principle is: A FortiLink split interface may intentionally keep only one physical path active without MCLAG. In the source material it is associated with: A FortiLink split interface may intentionally keep only one physical path active without MCLAG. This case has a different controlling cause: An available Ethernet port does not mean the power supply has spare PoE capacity. Its keyed mechanism is: An available Ethernet port does not mean the power supply has spare PoE capacity.

Question 299

At the Westhaven managed-network provider, several new IP cameras power cycle because available switch PoE watts are exhausted. Which test result best shows the requirement is met?

  1. All authorized cameras stay online under peak simultaneous load
  2. The corrected connection negotiates the intended speed without FCS errors
  3. Observed voice packets use the assigned class with acceptable loss and delay
  4. A dual-homed test device retains forwarding after either peer path fails

Explanation

Correct Answer

A:

At the Westhaven managed-network provider, evidence that all authorized cameras stay online under peak simultaneous load directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

B:

The offered observation is: The corrected connection negotiates the intended speed without FCS errors. It would support the separate mechanism: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. In this case the decisive dependency is: An available Ethernet port does not mean the power supply has spare PoE capacity. The original keyed verification is: All authorized cameras stay online under peak simultaneous load.

C:

Observed voice packets use the assigned class with acceptable loss and delay. That result would test a control for this other failure: A saved QoS policy does not prove that the intended packets actually match its queue. The question instead requires evidence for: An available Ethernet port does not mean the power supply has spare PoE capacity. The direct outcome to verify is: All authorized cameras stay online under peak simultaneous load.

D:

At the Westhaven managed-network provider, a result about mclag inter chassis configuration would not show that the team corrected the failure where an available Ethernet port does not mean the power supply has spare PoE capacity.

Question 300

At the Westhaven managed-network provider, several new IP cameras power cycle because available switch PoE watts are exhausted. Which ongoing control best prevents this issue from recurring?

  1. Monitor repeated violations rather than clearing the state blindly
  2. Track path health and ECMP consistency during link upgrades
  3. Monitor PoE headroom as devices are added
  4. Include switch management reachability in each HA maintenance test

Explanation

Correct Answer

C:

After implementation, the team should monitor PoE headroom as devices are added as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

A:

That routine supports port error-disable recovery, but the relevant ongoing risk requires the team to monitor PoE headroom as devices are added. For the Westhaven managed-network provider, the direct corrective action is to compare per-port class demand and total available PoE capacity and adjust hardware or allocations.

B:

Track path health and ECMP consistency during link upgrades. That safeguard would help prevent recurrence of: Equal-cost multipath may use a flow hash rather than distributing consecutive packets across every path. The risk being reviewed here is instead: An available Ethernet port does not mean the power supply has spare PoE capacity. The matching ongoing control is: Monitor PoE headroom as devices are added.

D:

Include switch management reachability in each HA maintenance test. That safeguard would help prevent recurrence of: HA failover can strand managed switches when the new active FortiGate has no valid management path. The risk being reviewed here is instead: An available Ethernet port does not mean the power supply has spare PoE capacity. The matching ongoing control is: Monitor PoE headroom as devices are added.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests