McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 31

Question 300

At the Westhaven managed-network provider, several new IP cameras power cycle because available switch PoE watts are exhausted. Which ongoing control best prevents this issue from recurring?

  1. Monitor repeated violations rather than clearing the state blindly
  2. Track path health and ECMP consistency during link upgrades
  3. Monitor PoE headroom as devices are added
  4. Include switch management reachability in each HA maintenance test

Explanation

Correct Answer

C:

After implementation, the team should monitor PoE headroom as devices are added as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

A:

That routine supports port error-disable recovery, but the relevant ongoing risk requires the team to monitor PoE headroom as devices are added. For the Westhaven managed-network provider, the direct corrective action is to compare per-port class demand and total available PoE capacity and adjust hardware or allocations.

B:

Track path health and ECMP consistency during link upgrades. That safeguard would help prevent recurrence of: Equal-cost multipath may use a flow hash rather than distributing consecutive packets across every path. The risk being reviewed here is instead: An available Ethernet port does not mean the power supply has spare PoE capacity. The matching ongoing control is: Monitor PoE headroom as devices are added.

D:

Include switch management reachability in each HA maintenance test. That safeguard would help prevent recurrence of: HA failover can strand managed switches when the new active FortiGate has no valid management path. The risk being reviewed here is instead: An available Ethernet port does not mean the power supply has spare PoE capacity. The matching ongoing control is: Monitor PoE headroom as devices are added.

Question 301

At the Marshport network modernization program, a constrained switch reduces endpoint power and disables an essential phone before decorative devices. Which implementation choice best addresses the situation?

  1. Use compatible supported duplex and auto-negotiation settings at both ends
  2. Configure supported PoE allocation priorities according to business criticality
  3. Move management reachability to an approved restricted VLAN or management interface with permitted access only
  4. Create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway

Explanation

Correct Answer

B:

Configure supported PoE allocation priorities according to business criticality is the best response because default power allocation order may not protect the most important devices during shortage. A focused validation would establish that a controlled power limit preserves critical phones and sheds approved lower-priority loads.

Incorrect Answers

A:

This alternative would be suitable where a speed or duplex mismatch can create retransmissions despite an illuminated link. It does not by itself resolve the need to configure supported PoE allocation priorities according to business criticality. For the Marshport network modernization program, the direct corrective action is to configure supported PoE allocation priorities according to business criticality.

C:

The option addresses the separate situation where unrestricted management VLAN placement increases exposure to unauthorized device access. For this case, the more appropriate response is to configure supported PoE allocation priorities according to business criticality. For the Marshport network modernization program, the direct corrective action is to configure supported PoE allocation priorities according to business criticality.

D:

The offered alternative is: Create separate FortiSwitch VLANs and enforce permitted inter-VLAN policy at the appropriate gateway. It addresses this separate failure mode: A shared Layer 2 segment exposes traffic and discovery across groups intended to be isolated. In the current case, the observed mechanism is: Default power allocation order may not protect the most important devices during shortage. The keyed action, Configure supported PoE allocation priorities according to business criticality., targets that condition more directly.

Question 302

At the Marshport network modernization program, a constrained switch reduces endpoint power and disables an essential phone before decorative devices. What risk should the team identify as the primary issue?

  1. Excess attenuation can corrupt frames even when physical link occasionally remains up
  2. Excessive unique source addresses may strain hardware learning resources
  3. Default power allocation order may not protect the most important devices during shortage
  4. An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes

Explanation

Correct Answer

C:

The evidence indicates that default power allocation order may not protect the most important devices during shortage. The appropriate response is to configure supported PoE allocation priorities according to business criticality and demonstrate that a controlled power limit preserves critical phones and sheds approved lower-priority loads.

Incorrect Answers

A:

The offered action is: Excess attenuation can corrupt frames even when physical link occasionally remains up. It is associated with this separate technical condition: Excess attenuation can corrupt frames even when physical link occasionally remains up. The actual incident concerns a different dependency: Default power allocation order may not protect the most important devices during shortage. The corresponding change is: Default power allocation order may not protect the most important devices during shortage.

B:

Excessive unique source addresses may strain hardware learning resources. That may occur elsewhere, but the evidence at the Marshport network modernization program instead points to the fact that default power allocation order may not protect the most important devices during shortage.

D:

An uncontrolled Layer 2 loop triggers broadcast amplification and frequent topology changes. That is not the mechanism that accounts for the stated failure at the Marshport network modernization program.

Question 303

At the Marshport network modernization program, a constrained switch reduces endpoint power and disables an essential phone before decorative devices. What is the strongest acceptance test for this change?

  1. A targeted diagnostic identifies the failing component and forwarding recovers after repair
  2. The ISL stays stable with valid optical diagnostics and every member remains managed
  3. A controlled power limit preserves critical phones and sheds approved lower-priority loads
  4. A mixed-load test preserves protected video quality and acceptable best-effort throughput

Explanation

Correct Answer

C:

This tests the real business behavior: a controlled power limit preserves critical phones and sheds approved lower-priority loads. It specifically checks whether the risk that default power allocation order may not protect the most important devices during shortage has been reduced.

Incorrect Answers

A:

A targeted diagnostic identifies the failing component and forwarding recovers after repair. That result would test a control for this other failure: Physical port faults cannot be distinguished from configuration causes by restart alone. The question instead requires evidence for: Default power allocation order may not protect the most important devices during shortage. The direct outcome to verify is: A controlled power limit preserves critical phones and sheds approved lower-priority loads.

B:

At the Marshport network modernization program, a result about stack port transceiver selection would not show that the team corrected the failure where default power allocation order may not protect the most important devices during shortage.

D:

The offered observation is: A mixed-load test preserves protected video quality and acceptable best-effort throughput. It would support the separate mechanism: Overly broad strict priority classification can prevent lower queues receiving service. In this case the decisive dependency is: Default power allocation order may not protect the most important devices during shortage. The original keyed verification is: A controlled power limit preserves critical phones and sheds approved lower-priority loads.

Question 304

At the Marshport network modernization program, a constrained switch reduces endpoint power and disables an essential phone before decorative devices. Which setting or practice should be reviewed in future?

  1. Monitor collision or CRC trends after physical changes
  2. Reevaluate PoE priority after endpoint inventory changes
  3. Require controller-aware review for managed STP configuration changes
  4. Review spanning tree boundaries during equipment refreshes

Explanation

Correct Answer

B:

This control works beyond the initial remediation because it requires the team to reevaluate PoE priority after endpoint inventory changes.

Incorrect Answers

A:

Monitor collision or CRC trends after physical changes is not the primary recurring safeguard for this problem. The team should reevaluate PoE priority after endpoint inventory changes. For the Marshport network modernization program, the direct corrective action is to configure supported PoE allocation priorities according to business criticality.

C:

The suggested preventive check is: Require controller-aware review for managed STP configuration changes. Its technical scope concerns: A managed FortiLink topology has control and data requirements beyond ordinary standalone edge switch assumptions. This question asks how to sustain control over: Default power allocation order may not protect the most important devices during shortage. The more targeted safeguard is: Reevaluate PoE priority after endpoint inventory changes.

D:

Review spanning tree boundaries during equipment refreshes. That safeguard would help prevent recurrence of: Different STP variants can interoperate at boundaries without sharing every internal instance decision. The risk being reviewed here is instead: Default power allocation order may not protect the most important devices during shortage. The matching ongoing control is: Reevaluate PoE priority after endpoint inventory changes.

Question 305

At the Greystone LAN operations group, an engineer assumes every FortiSwitch model supports a new high speed transceiver shown in another model's guide. Which corrective action best meets the requirement?

  1. Consult the version-specific FortiSwitch feature matrix and compatible transceiver list for the exact hardware
  2. Calculate optical loss and select approved optics with appropriate supported reach
  3. Configure supported IGMP snooping and correct querier availability for the VLAN
  4. Check the complete device path for LLDP-MED delivery and use a supported alternate voice policy where required

Explanation

Correct Answer

A:

This is the direct FortiSwitch 7.6 administration remedy: consult the version-specific FortiSwitch feature matrix and compatible transceiver list for the exact hardware. The observed risk is that port speed and optics support vary across switch families and FortiSwitchOS versions; a passing acceptance check would show that the chosen optic appears in supported compatibility information and establishes its specified link.

Incorrect Answers

B:

The offered action is: Calculate optical loss and select approved optics with appropriate supported reach. It is associated with this separate technical condition: Excess attenuation can corrupt frames even when physical link occasionally remains up. The actual incident concerns a different dependency: Port speed and optics support vary across switch families and FortiSwitchOS versions. The corresponding change is: Consult the version-specific FortiSwitch feature matrix and compatible transceiver list for the exact hardware.

C:

Configure supported IGMP snooping and correct querier availability for the VLAN can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to consult the version-specific FortiSwitch feature matrix and compatible transceiver list for the exact hardware. For the Greystone LAN operations group, the direct corrective action is to consult the version-specific FortiSwitch feature matrix and compatible transceiver list for the exact hardware.

D:

The offered alternative is: Check the complete device path for LLDP-MED delivery and use a supported alternate voice policy where required. It addresses this separate failure mode: An intermediary can block discovery advertisements even when Ethernet connectivity works. In the current case, the observed mechanism is: Port speed and optics support vary across switch families and FortiSwitchOS versions. The keyed action, Consult the version-specific FortiSwitch feature matrix and compatible transceiver list for the exact hardware., targets that condition more directly.

Question 306

At the Greystone LAN operations group, an engineer assumes every FortiSwitch model supports a new high speed transceiver shown in another model's guide. Which underlying issue most directly explains this situation?

  1. Gigabit copper Ethernet needs correctly functioning cable pairs and termination
  2. One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths
  3. FortiGate manages every member separately even when the switches form one Layer 2 managed stack
  4. Port speed and optics support vary across switch families and FortiSwitchOS versions

Explanation

Correct Answer

D:

The problem stems from the fact that port speed and optics support vary across switch families and FortiSwitchOS versions. A correct solution would consult the version-specific FortiSwitch feature matrix and compatible transceiver list for the exact hardware and check that the chosen optic appears in supported compatibility information and establishes its specified link.

Incorrect Answers

A:

The offered principle is: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. In the source material it is associated with: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. This case has a different controlling cause: Port speed and optics support vary across switch families and FortiSwitchOS versions. Its keyed mechanism is: Port speed and optics support vary across switch families and FortiSwitchOS versions.

B:

One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. That is not the mechanism that accounts for the stated failure at the Greystone LAN operations group.

C:

The offered principle is: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. In the source material it is associated with: FortiGate manages every member separately even when the switches form one Layer 2 managed stack. This case has a different controlling cause: Port speed and optics support vary across switch families and FortiSwitchOS versions. Its keyed mechanism is: Port speed and optics support vary across switch families and FortiSwitchOS versions.

Question 307

At the Greystone LAN operations group, an engineer assumes every FortiSwitch model supports a new high speed transceiver shown in another model's guide. What evidence would justify considering this concern addressed?

  1. The analyzer receives only the intended mirrored traffic with correct packet headers
  2. Tagged test traffic enters the intended egress queue under load
  3. The chosen optic appears in supported compatibility information and establishes its specified link
  4. A dual-homed test device retains forwarding after either peer path fails

Explanation

Correct Answer

C:

At the Greystone LAN operations group, evidence that the chosen optic appears in supported compatibility information and establishes its specified link directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

The analyzer receives only the intended mirrored traffic with correct packet headers. That result would test a control for this other failure: Ordinary switching does not clone unrelated transit traffic to a monitoring port. The question instead requires evidence for: Port speed and optics support vary across switch families and FortiSwitchOS versions. The direct outcome to verify is: The chosen optic appears in supported compatibility information and establishes its specified link.

B:

The offered observation is: Tagged test traffic enters the intended egress queue under load. It would support the separate mechanism: An 802.1Q priority field does not guarantee desired scheduling without a matching QoS policy. In this case the decisive dependency is: Port speed and optics support vary across switch families and FortiSwitchOS versions. The original keyed verification is: The chosen optic appears in supported compatibility information and establishes its specified link.

D:

The offered observation is: A dual-homed test device retains forwarding after either peer path fails. It would support the separate mechanism: Multi-chassis aggregation cannot function properly without coordinated peer state and ICL connectivity. In this case the decisive dependency is: Port speed and optics support vary across switch families and FortiSwitchOS versions. The original keyed verification is: The chosen optic appears in supported compatibility information and establishes its specified link.

Question 308

At the Greystone LAN operations group, an engineer assumes every FortiSwitch model supports a new high speed transceiver shown in another model's guide. How should the organization sustain the improvement?

  1. Trend optical receive power across long links
  2. Review FortiLink point-to-point settings when intermediate transport changes
  3. Review support matrices before hardware purchases
  4. Reassess loop-control compatibility after adding switch models

Explanation

Correct Answer

C:

The continuing safeguard is to review support matrices before hardware purchases. It helps avoid the original condition: port speed and optics support vary across switch families and FortiSwitchOS versions.

Incorrect Answers

A:

The suggested preventive check is: Trend optical receive power across long links. Its technical scope concerns: Excess attenuation can corrupt frames even when physical link occasionally remains up. This question asks how to sustain control over: Port speed and optics support vary across switch families and FortiSwitchOS versions. The more targeted safeguard is: Review support matrices before hardware purchases.

B:

Review FortiLink point-to-point settings when intermediate transport changes. That safeguard would help prevent recurrence of: A transparent intermediate device may not forward the control frames needed for normal FortiLink neighbor discovery. The risk being reviewed here is instead: Port speed and optics support vary across switch families and FortiSwitchOS versions. The matching ongoing control is: Review support matrices before hardware purchases.

D:

Reassess loop-control compatibility after adding switch models. That safeguard would help prevent recurrence of: Redundant physical links need controlled forwarding to prevent Layer 2 loops. The risk being reviewed here is instead: Port speed and optics support vary across switch families and FortiSwitchOS versions. The matching ongoing control is: Review support matrices before hardware purchases.

Question 309

At the Maplehaven regional network integrator, network staff connect an analysis workstation to a normal access port and expect copies of another interface's packets. Which approach best resolves the described issue?

  1. Compare per-port class demand and total available PoE capacity and adjust hardware or allocations
  2. Use LLDP neighbor details and physical documentation to correct the port to peer mapping
  3. Configure a supported mirror source and destination or approved capture feature
  4. Inspect PoE power allocation and any supported LLDP-MED power negotiation information

Explanation

Correct Answer

C:

This solution addresses the stated limitation: ordinary switching does not clone unrelated transit traffic to a monitoring port. Implementing it means the team should configure a supported mirror source and destination or approved capture feature, then verify that the analyzer receives only the intended mirrored traffic with correct packet headers.

Incorrect Answers

A:

Compare per-port class demand and total available PoE capacity and adjust hardware or allocations can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to configure a supported mirror source and destination or approved capture feature. For the Maplehaven regional network integrator, the direct corrective action is to configure a supported mirror source and destination or approved capture feature.

B:

The offered action is: Use LLDP neighbor details and physical documentation to correct the port to peer mapping. It is associated with this separate technical condition: Port labels may become stale when cables move and must be reconciled with observed neighbors. The actual incident concerns a different dependency: Ordinary switching does not clone unrelated transit traffic to a monitoring port. The corresponding change is: Configure a supported mirror source and destination or approved capture feature.

D:

Inspect PoE power allocation and any supported LLDP-MED power negotiation information addresses a different kind of problem: link availability alone cannot establish whether the powered endpoint receives sufficient negotiated watts. Here the reported weakness is that ordinary switching does not clone unrelated transit traffic to a monitoring port. For the Maplehaven regional network integrator, the direct corrective action is to configure a supported mirror source and destination or approved capture feature.

Question 310

At the Maplehaven regional network integrator, network staff connect an analysis workstation to a normal access port and expect copies of another interface's packets. Which explanation best accounts for the concern?

  1. Gigabit copper Ethernet needs correctly functioning cable pairs and termination
  2. A saved QoS policy does not prove that the intended packets actually match its queue
  3. Unexpected root election creates suboptimal forwarding paths and fragile redundancy
  4. Ordinary switching does not clone unrelated transit traffic to a monitoring port

Explanation

Correct Answer

D:

This identifies the root issue: ordinary switching does not clone unrelated transit traffic to a monitoring port. At the Maplehaven regional network integrator, the team should therefore configure a supported mirror source and destination or approved capture feature.

Incorrect Answers

A:

The offered principle is: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. In the source material it is associated with: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. This case has a different controlling cause: Ordinary switching does not clone unrelated transit traffic to a monitoring port. Its keyed mechanism is: Ordinary switching does not clone unrelated transit traffic to a monitoring port.

B:

Although a saved QoS policy does not prove that the intended packets actually match its queue, the presented symptoms do not support that as the primary cause; they indicate that ordinary switching does not clone unrelated transit traffic to a monitoring port. For the Maplehaven regional network integrator, the direct corrective action is to configure a supported mirror source and destination or approved capture feature.

C:

The offered principle is: Unexpected root election creates suboptimal forwarding paths and fragile redundancy. In the source material it is associated with: Unexpected root election creates suboptimal forwarding paths and fragile redundancy. This case has a different controlling cause: Ordinary switching does not clone unrelated transit traffic to a monitoring port. Its keyed mechanism is: Ordinary switching does not clone unrelated transit traffic to a monitoring port.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests