McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 26

Question 250

At the Oakport data network services firm, a fiber port loses BPDUs on one direction and incorrectly transitions toward forwarding. Which explanation best accounts for the concern?

  1. Unexpected root election creates suboptimal forwarding paths and fragile redundancy
  2. A unidirectional control-plane failure can make a redundant path appear safe when it is not
  3. A physically healthy trunk does not automatically carry every VLAN identifier
  4. A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device

Explanation

Correct Answer

B:

The problem stems from the fact that a unidirectional control-plane failure can make a redundant path appear safe when it is not. A correct solution would use supported loop guard protection or correct the failing link to avoid unsafe forwarding and check that a simulated BPDU loss does not create a loop and raises a detectable event.

Incorrect Answers

A:

The offered principle is: Unexpected root election creates suboptimal forwarding paths and fragile redundancy. In the source material it is associated with: Unexpected root election creates suboptimal forwarding paths and fragile redundancy. This case has a different controlling cause: A unidirectional control-plane failure can make a redundant path appear safe when it is not. Its keyed mechanism is: A unidirectional control-plane failure can make a redundant path appear safe when it is not.

C:

The offered principle is: A physically healthy trunk does not automatically carry every VLAN identifier. In the source material it is associated with: A physically healthy trunk does not automatically carry every VLAN identifier. This case has a different controlling cause: A unidirectional control-plane failure can make a redundant path appear safe when it is not. Its keyed mechanism is: A unidirectional control-plane failure can make a redundant path appear safe when it is not.

D:

A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. That may occur elsewhere, but the evidence at the Oakport data network services firm instead points to the fact that a unidirectional control-plane failure can make a redundant path appear safe when it is not.

Question 251

At the Oakport data network services firm, a fiber port loses BPDUs on one direction and incorrectly transitions toward forwarding. Which test result best shows the requirement is met?

  1. A test client becomes usable promptly and a connected bridge is handled safely
  2. A test aggregate forwards as approved and does not create bridging loops
  3. All authorized cameras stay online under peak simultaneous load
  4. A simulated BPDU loss does not create a loop and raises a detectable event

Explanation

Correct Answer

D:

The team can confirm the fix by showing that a simulated BPDU loss does not create a loop and raises a detectable event. This aligns with the corrective design to use supported loop guard protection or correct the failing link to avoid unsafe forwarding.

Incorrect Answers

A:

A test client becomes usable promptly and a connected bridge is handled safely. That result would test a control for this other failure: A non-edge STP transition may delay client connectivity even when no downstream bridge exists. The question instead requires evidence for: A unidirectional control-plane failure can make a redundant path appear safe when it is not. The direct outcome to verify is: A simulated BPDU loss does not create a loop and raises a detectable event.

B:

The offered observation is: A test aggregate forwards as approved and does not create bridging loops. It would support the separate mechanism: A peer that does not negotiate LACP cannot form a dynamic aggregated link. In this case the decisive dependency is: A unidirectional control-plane failure can make a redundant path appear safe when it is not. The original keyed verification is: A simulated BPDU loss does not create a loop and raises a detectable event.

C:

All authorized cameras stay online under peak simultaneous load. That result would test a control for this other failure: An available Ethernet port does not mean the power supply has spare PoE capacity. The question instead requires evidence for: A unidirectional control-plane failure can make a redundant path appear safe when it is not. The direct outcome to verify is: A simulated BPDU loss does not create a loop and raises a detectable event.

Question 252

At the Oakport data network services firm, a fiber port loses BPDUs on one direction and incorrectly transitions toward forwarding. Which ongoing control best prevents this issue from recurring?

  1. Validate edge-port designation whenever a port role changes
  2. Review one-way fiber failures and STP protection during maintenance
  3. Monitor DHCP relay endpoints after server migrations
  4. Check port tagging agreements during legacy device replacements

Explanation

Correct Answer

B:

The needed prevention is to review one-way fiber failures and STP protection during maintenance. It directly sustains the original change to use supported loop guard protection or correct the failing link to avoid unsafe forwarding.

Incorrect Answers

A:

That routine supports rstp edge-port setting, but the relevant ongoing risk requires the team to review one-way fiber failures and STP protection during maintenance. For the Oakport data network services firm, the direct corrective action is to use supported loop guard protection or correct the failing link to avoid unsafe forwarding.

C:

Monitor DHCP relay endpoints after server migrations is not the primary recurring safeguard for this problem. The team should review one-way fiber failures and STP protection during maintenance. For the Oakport data network services firm, the direct corrective action is to use supported loop guard protection or correct the failing link to avoid unsafe forwarding.

D:

Check port tagging agreements during legacy device replacements. That safeguard would help prevent recurrence of: A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. The risk being reviewed here is instead: A unidirectional control-plane failure can make a redundant path appear safe when it is not. The matching ongoing control is: Review one-way fiber failures and STP protection during maintenance.

Question 253

At the Dartwood switching consultancy, all departmental VLANs use one spanning tree instance despite separate redundant uplink load-sharing objectives. Which implementation choice best addresses the situation?

  1. Set supported path costs or priorities to align STP selection with approved link roles
  2. Select a matched supported transceiver pair for the fiber medium and distance
  3. Assign supported VLAN-to-MST instance mappings and root placements consistent with the design
  4. Inspect link state transceiver counters and supported loopback or cable diagnostics first

Explanation

Correct Answer

C:

This is the direct FortiSwitch 7.6 administration remedy: assign supported VLAN-to-MST instance mappings and root placements consistent with the design. The observed risk is that one spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths; a passing acceptance check would show that test VLAN groups use their intended root uplinks without creating loops.

Incorrect Answers

A:

This alternative would be suitable where sTP chooses paths from bridge and port metrics rather than business labels. It does not by itself resolve the need to assign supported VLAN-to-MST instance mappings and root placements consistent with the design. For the Dartwood switching consultancy, the direct corrective action is to assign supported VLAN-to-MST instance mappings and root placements consistent with the design.

B:

Select a matched supported transceiver pair for the fiber medium and distance addresses a different kind of problem: physical connector compatibility does not guarantee optical transmitter receiver compatibility. Here the reported weakness is that one spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. For the Dartwood switching consultancy, the direct corrective action is to assign supported VLAN-to-MST instance mappings and root placements consistent with the design.

D:

The offered alternative is: Inspect link state transceiver counters and supported loopback or cable diagnostics first. It addresses this separate failure mode: Physical port faults cannot be distinguished from configuration causes by restart alone. In the current case, the observed mechanism is: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. The keyed action, Assign supported VLAN-to-MST instance mappings and root placements consistent with the design., targets that condition more directly.

Question 254

At the Dartwood switching consultancy, all departmental VLANs use one spanning tree instance despite separate redundant uplink load-sharing objectives. What risk should the team identify as the primary issue?

  1. Unexpected bridge protocol frames on an edge port indicate a possible unauthorized loop
  2. Excess attenuation can corrupt frames even when physical link occasionally remains up
  3. Phones may fall into the wrong subnet when tagged voice frames are not allowed on the port
  4. One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths

Explanation

Correct Answer

D:

The architectural weakness is that one spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. It can be addressed through the controlled change to assign supported VLAN-to-MST instance mappings and root placements consistent with the design.

Incorrect Answers

A:

The offered action is: Unexpected bridge protocol frames on an edge port indicate a possible unauthorized loop. It is associated with this separate technical condition: Unexpected bridge protocol frames on an edge port indicate a possible unauthorized loop. The actual incident concerns a different dependency: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. The corresponding change is: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths.

B:

Excess attenuation can corrupt frames even when physical link occasionally remains up. That may occur elsewhere, but the evidence at the Dartwood switching consultancy instead points to the fact that one spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths.

C:

The offered alternative is: Phones may fall into the wrong subnet when tagged voice frames are not allowed on the port. It addresses this separate failure mode: Phones may fall into the wrong subnet when tagged voice frames are not allowed on the port. In the current case, the observed mechanism is: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. The keyed action, One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths., targets that condition more directly.

Question 255

At the Dartwood switching consultancy, all departmental VLANs use one spanning tree instance despite separate redundant uplink load-sharing objectives. What is the strongest acceptance test for this change?

  1. The intended distribution switch is root and alternate paths block as designed
  2. Test VLAN groups use their intended root uplinks without creating loops
  3. A controlled power limit preserves critical phones and sheds approved lower-priority loads
  4. An authorized remote VLAN receiver receives packets over the approved multicast path

Explanation

Correct Answer

B:

The team can confirm the fix by showing that test VLAN groups use their intended root uplinks without creating loops. This aligns with the corrective design to assign supported VLAN-to-MST instance mappings and root placements consistent with the design.

Incorrect Answers

A:

The intended distribution switch is root and alternate paths block as designed. That result would test a control for this other failure: Unexpected root election creates suboptimal forwarding paths and fragile redundancy. The question instead requires evidence for: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. The direct outcome to verify is: Test VLAN groups use their intended root uplinks without creating loops.

C:

A controlled power limit preserves critical phones and sheds approved lower-priority loads. That result would test a control for this other failure: Default power allocation order may not protect the most important devices during shortage. The question instead requires evidence for: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. The direct outcome to verify is: Test VLAN groups use their intended root uplinks without creating loops.

D:

The offered observation is: An authorized remote VLAN receiver receives packets over the approved multicast path. It would support the separate mechanism: IGMP snooping in one VLAN does not build a routed multicast path between subnet boundaries. In this case the decisive dependency is: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. The original keyed verification is: Test VLAN groups use their intended root uplinks without creating loops.

Question 256

At the Dartwood switching consultancy, all departmental VLANs use one spanning tree instance despite separate redundant uplink load-sharing objectives. Which setting or practice should be reviewed in future?

  1. Compare MSTP region digests when adding a new switch
  2. Check port tagging agreements during legacy device replacements
  3. Audit MST instance mapping when VLANs are added
  4. Maintain VLAN gateway ownership and route inventories

Explanation

Correct Answer

C:

The team should audit MST instance mapping when VLANs are added. That recurring practice targets the same weakness, namely that one spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths.

Incorrect Answers

A:

Compare MSTP region digests when adding a new switch is not the primary recurring safeguard for this problem. The team should audit MST instance mapping when VLANs are added. For the Dartwood switching consultancy, the direct corrective action is to assign supported VLAN-to-MST instance mappings and root placements consistent with the design.

B:

Check port tagging agreements during legacy device replacements. That safeguard would help prevent recurrence of: A frame carrying an unexpected 802.1Q tag can be rejected by an untagged-only device. The risk being reviewed here is instead: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. The matching ongoing control is: Audit MST instance mapping when VLANs are added.

D:

Maintain VLAN gateway ownership and route inventories. That safeguard would help prevent recurrence of: Separate VLAN broadcast domains do not communicate without an approved Layer 3 path. The risk being reviewed here is instead: One spanning tree forwarding topology cannot distribute different VLAN groups over selected independent paths. The matching ongoing control is: Audit MST instance mapping when VLANs are added.

Question 257

At the Silverport infrastructure service operator, an administrator enables BPDU filtering on an inter-switch trunk to make a blocked link forward. Which corrective action best meets the requirement?

  1. Align the MST region name revision and VLAN instance mapping across participating switches
  2. Align supported FortiLink HA topology and member connectivity with the redundancy design
  3. Set the intended native VLAN on the endpoint port and validate the access policy
  4. Remove unsafe BPDU filtering and restore protocol exchange on intended switch-to-switch links

Explanation

Correct Answer

D:

For the Silverport infrastructure service operator, the appropriate correction is to remove unsafe BPDU filtering and restore protocol exchange on intended switch-to-switch links. The decisive reason is that suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop; acceptance evidence is that neighbor bridge state is discovered and one redundant path is safely controlled.

Incorrect Answers

A:

The option addresses the separate situation where different MSTP region parameters change how peers interpret instances and topology. For this case, the more appropriate response is to remove unsafe BPDU filtering and restore protocol exchange on intended switch-to-switch links. For the Silverport infrastructure service operator, the direct corrective action is to remove unsafe BPDU filtering and restore protocol exchange on intended switch-to-switch links.

B:

The offered action is: Align supported FortiLink HA topology and member connectivity with the redundancy design. It is associated with this separate technical condition: HA failover can strand managed switches when the new active FortiGate has no valid management path. The actual incident concerns a different dependency: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The corresponding change is: Remove unsafe BPDU filtering and restore protocol exchange on intended switch-to-switch links.

C:

Set the intended native VLAN on the endpoint port and validate the access policy can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to remove unsafe BPDU filtering and restore protocol exchange on intended switch-to-switch links. For the Silverport infrastructure service operator, the direct corrective action is to remove unsafe BPDU filtering and restore protocol exchange on intended switch-to-switch links.

Question 258

At the Silverport infrastructure service operator, an administrator enables BPDU filtering on an inter-switch trunk to make a blocked link forward. Which underlying issue most directly explains this situation?

  1. Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop
  2. Parallel unmanaged forwarding paths can cause persistent Ethernet loops
  3. Gigabit copper Ethernet needs correctly functioning cable pairs and termination
  4. An access-style port assignment can discard tagged traffic expected by upstream switches

Explanation

Correct Answer

A:

The evidence indicates that suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The appropriate response is to remove unsafe BPDU filtering and restore protocol exchange on intended switch-to-switch links and demonstrate that neighbor bridge state is discovered and one redundant path is safely controlled.

Incorrect Answers

B:

Parallel unmanaged forwarding paths can cause persistent Ethernet loops. That is not the mechanism that accounts for the stated failure at the Silverport infrastructure service operator.

C:

The offered principle is: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. In the source material it is associated with: Gigabit copper Ethernet needs correctly functioning cable pairs and termination. This case has a different controlling cause: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. Its keyed mechanism is: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop.

D:

Although an access-style port assignment can discard tagged traffic expected by upstream switches, the presented symptoms do not support that as the primary cause; they indicate that suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. For the Silverport infrastructure service operator, the direct corrective action is to remove unsafe BPDU filtering and restore protocol exchange on intended switch-to-switch links.

Question 259

At the Silverport infrastructure service operator, an administrator enables BPDU filtering on an inter-switch trunk to make a blocked link forward. What evidence would justify considering this concern addressed?

  1. Neighbors report the expected region and stable instance root ports
  2. The chosen optic appears in supported compatibility information and establishes its specified link
  3. Neighbor bridge state is discovered and one redundant path is safely controlled
  4. All authorized cameras stay online under peak simultaneous load

Explanation

Correct Answer

C:

At the Silverport infrastructure service operator, evidence that neighbor bridge state is discovered and one redundant path is safely controlled directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

A:

Neighbors report the expected region and stable instance root ports. That result would test a control for this other failure: Different MSTP region parameters change how peers interpret instances and topology. The question instead requires evidence for: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The direct outcome to verify is: Neighbor bridge state is discovered and one redundant path is safely controlled.

B:

The offered observation is: The chosen optic appears in supported compatibility information and establishes its specified link. It would support the separate mechanism: Port speed and optics support vary across switch families and FortiSwitchOS versions. In this case the decisive dependency is: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The original keyed verification is: Neighbor bridge state is discovered and one redundant path is safely controlled.

D:

The offered observation is: All authorized cameras stay online under peak simultaneous load. It would support the separate mechanism: An available Ethernet port does not mean the power supply has spare PoE capacity. In this case the decisive dependency is: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The original keyed verification is: Neighbor bridge state is discovered and one redundant path is safely controlled.

Question 260

At the Silverport infrastructure service operator, an administrator enables BPDU filtering on an inter-switch trunk to make a blocked link forward. How should the organization sustain the improvement?

  1. Review one-way fiber failures and STP protection during maintenance
  2. Monitor collision or CRC trends after physical changes
  3. Flag BPDU filter changes on infrastructure uplinks for review
  4. Baseline active routes following each topology change

Explanation

Correct Answer

C:

The continuing safeguard is to flag BPDU filter changes on infrastructure uplinks for review. It helps avoid the original condition: suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop.

Incorrect Answers

A:

The suggested preventive check is: Review one-way fiber failures and STP protection during maintenance. Its technical scope concerns: A unidirectional control-plane failure can make a redundant path appear safe when it is not. This question asks how to sustain control over: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The more targeted safeguard is: Flag BPDU filter changes on infrastructure uplinks for review.

B:

Monitor collision or CRC trends after physical changes. That safeguard would help prevent recurrence of: A speed or duplex mismatch can create retransmissions despite an illuminated link. The risk being reviewed here is instead: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The matching ongoing control is: Flag BPDU filter changes on infrastructure uplinks for review.

D:

Baseline active routes following each topology change. That safeguard would help prevent recurrence of: Configured intent may not match the route actually selected for forwarding. The risk being reviewed here is instead: Suppressing BPDUs on a redundant trunk prevents STP from seeing a potential loop. The matching ongoing control is: Flag BPDU filter changes on infrastructure uplinks for review.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests