McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 45

Question 440

At the Highbridge campus infrastructure group, an island FortiSwitch aggregates ports toward two different intermediary routers while using internal-interface Layer 3 management. How should the organization sustain the improvement?

  1. Include managed switching in FortiGate HA acceptance tests
  2. Audit management addresses and access-source restrictions
  3. Synchronize switch port inventory after moves
  4. Review L3 island route and LAG support during redundancy changes

Explanation

Correct Answer

D:

The needed prevention is to review L3 island route and LAG support during redundancy changes. It directly sustains the original change to rework the LAG to the supported single intermediary or supported alternative topology.

Incorrect Answers

A:

The suggested preventive check is: Include managed switching in FortiGate HA acceptance tests. Its technical scope concerns: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. This question asks how to sustain control over: The documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers. The more targeted safeguard is: Review L3 island route and LAG support during redundancy changes.

B:

Audit management addresses and access-source restrictions. That safeguard would help prevent recurrence of: Management-plane routing and access controls are separate from user data forwarding. The risk being reviewed here is instead: The documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers. The matching ongoing control is: Review L3 island route and LAG support during redundancy changes.

C:

That routine supports fortiswitch port inventory labels, but the relevant ongoing risk requires the team to review L3 island route and LAG support during redundancy changes. For the Highbridge campus infrastructure group, the direct corrective action is to rework the LAG to the supported single intermediary or supported alternative topology.

Question 441

At the Zephyrhaven infrastructure service operator, a Layer 3 island contains switches pointed at different FortiGate management controllers. Which approach best resolves the described issue?

  1. Test and document supported FortiLink path failover and controller reachability end to end
  2. Set the supported managed-switch port VLAN and voice policy in the FortiGate controller
  3. Ensure every FortiSwitch in the same island is assigned to one supported controller
  4. Create FortiGate administrative access profiles restricting switch operations to required responsibilities

Explanation

Correct Answer

C:

This solution addresses the stated limitation: mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. Implementing it means the team should ensure every FortiSwitch in the same island is assigned to one supported controller, then verify that all island members report the same intended FortiGate controller identity.

Incorrect Answers

A:

Test and document supported FortiLink path failover and controller reachability end to end can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to ensure every FortiSwitch in the same island is assigned to one supported controller. For the Zephyrhaven infrastructure service operator, the direct corrective action is to ensure every FortiSwitch in the same island is assigned to one supported controller.

B:

The offered action is: Set the supported managed-switch port VLAN and voice policy in the FortiGate controller. It is associated with this separate technical condition: A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. The actual incident concerns a different dependency: Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. The corresponding change is: Ensure every FortiSwitch in the same island is assigned to one supported controller.

D:

Create FortiGate administrative access profiles restricting switch operations to required responsibilities addresses a different kind of problem: excess controller privileges allow unintended changes to managed switch configurations. Here the reported weakness is that mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. For the Zephyrhaven infrastructure service operator, the direct corrective action is to ensure every FortiSwitch in the same island is assigned to one supported controller.

Question 442

At the Zephyrhaven infrastructure service operator, a Layer 3 island contains switches pointed at different FortiGate management controllers. Which explanation best accounts for the concern?

  1. Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation
  2. NAT between FortiSwitch and FortiGate is not supported for FortiLink Layer 3 management
  3. Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure
  4. Changing VDOM ownership can leave obsolete VLAN references and inaccessible management objects

Explanation

Correct Answer

A:

The strongest explanation is that mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. This accounts for the outcome and supports the action to ensure every FortiSwitch in the same island is assigned to one supported controller.

Incorrect Answers

B:

Although nAT between FortiSwitch and FortiGate is not supported for FortiLink Layer 3 management, the presented symptoms do not support that as the primary cause; they indicate that mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. For the Zephyrhaven infrastructure service operator, the direct corrective action is to ensure every FortiSwitch in the same island is assigned to one supported controller.

C:

The offered principle is: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. In the source material it is associated with: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. This case has a different controlling cause: Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. Its keyed mechanism is: Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation.

D:

Changing VDOM ownership can leave obsolete VLAN references and inaccessible management objects. That may occur elsewhere, but the evidence at the Zephyrhaven infrastructure service operator instead points to the fact that mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation.

Question 443

At the Zephyrhaven infrastructure service operator, a Layer 3 island contains switches pointed at different FortiGate management controllers. Which test result best shows the requirement is met?

  1. All island members report the same intended FortiGate controller identity
  2. An HA failover preserves switch authorization and the intended user network
  3. Each authorized switch obtains a distinct working management address and stays connected
  4. A test phone reaches its permitted voice subnet after policy synchronization

Explanation

Correct Answer

A:

At the Zephyrhaven infrastructure service operator, evidence that all island members report the same intended FortiGate controller identity directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

B:

The offered observation is: An HA failover preserves switch authorization and the intended user network. It would support the separate mechanism: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. In this case the decisive dependency is: Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. The original keyed verification is: All island members report the same intended FortiGate controller identity.

C:

Each authorized switch obtains a distinct working management address and stays connected. That result would test a control for this other failure: Switch discovery and controller communication require nonconflicting usable management addresses. The question instead requires evidence for: Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. The direct outcome to verify is: All island members report the same intended FortiGate controller identity.

D:

At the Zephyrhaven infrastructure service operator, a result about fortiswitch managed port vlan would not show that the team corrected the failure where mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation.

Question 444

At the Zephyrhaven infrastructure service operator, a Layer 3 island contains switches pointed at different FortiGate management controllers. Which ongoing control best prevents this issue from recurring?

  1. Audit routed management changes for unauthorized NAT
  2. Audit island controller binding after HA or site migrations
  3. Track authorized device inventory and decommission stale serials
  4. Recheck cross-VDOM VLAN settings after firmware upgrades

Explanation

Correct Answer

B:

The needed prevention is to audit island controller binding after HA or site migrations. It directly sustains the original change to ensure every FortiSwitch in the same island is assigned to one supported controller.

Incorrect Answers

A:

That routine supports fortilink l3 nat unsupported, but the relevant ongoing risk requires the team to audit island controller binding after HA or site migrations. For the Zephyrhaven infrastructure service operator, the direct corrective action is to ensure every FortiSwitch in the same island is assigned to one supported controller.

C:

Track authorized device inventory and decommission stale serials is not the primary recurring safeguard for this problem. The team should audit island controller binding after HA or site migrations. For the Zephyrhaven infrastructure service operator, the direct corrective action is to ensure every FortiSwitch in the same island is assigned to one supported controller.

D:

Recheck cross-VDOM VLAN settings after firmware upgrades. That safeguard would help prevent recurrence of: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. The risk being reviewed here is instead: Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. The matching ongoing control is: Audit island controller binding after HA or site migrations.

Question 445

At the Ivystone enterprise network team, an inter-switch link traverses a provider service using unexpected VLAN EtherType settings and discovery is intermittent. Which implementation choice best addresses the situation?

  1. Follow supported management-port Layer 3 design limits or use an appropriate in-band topology
  2. Verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch
  3. Align supported FortiLink point-to-point TPID requirements with the intermediate transport
  4. Recreate or reassign supported tenant VLAN interfaces and switch-port ownership under a controlled migration

Explanation

Correct Answer

C:

This is the direct FortiSwitch 7.6 administration remedy: align supported FortiLink point-to-point TPID requirements with the intermediate transport. The observed risk is that mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery; a passing acceptance check would show that a test discovers both switches over the corrected point-to-point transport.

Incorrect Answers

A:

This alternative would be suitable where the documented out-of-band mgmt-port Layer 3 mode supports a single FortiSwitch island member. It does not by itself resolve the need to align supported FortiLink point-to-point TPID requirements with the intermediate transport. For the Ivystone enterprise network team, the direct corrective action is to align supported FortiLink point-to-point TPID requirements with the intermediate transport.

B:

Verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch addresses a different kind of problem: physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. Here the reported weakness is that mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. For the Ivystone enterprise network team, the direct corrective action is to align supported FortiLink point-to-point TPID requirements with the intermediate transport.

D:

The offered alternative is: Recreate or reassign supported tenant VLAN interfaces and switch-port ownership under a controlled migration. It addresses this separate failure mode: Changing VDOM ownership can leave obsolete VLAN references and inaccessible management objects. In the current case, the observed mechanism is: Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. The keyed action, Align supported FortiLink point-to-point TPID requirements with the intermediate transport., targets that condition more directly.

Question 446

At the Ivystone enterprise network team, an inter-switch link traverses a provider service using unexpected VLAN EtherType settings and discovery is intermittent. What risk should the team identify as the primary issue?

  1. Some intermediate Layer 2 devices do not transport standard neighbor discovery frames
  2. Virtual tenant separation does not create independent physical power supplies
  3. Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration
  4. Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery

Explanation

Correct Answer

D:

The architectural weakness is that mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. It can be addressed through the controlled change to align supported FortiLink point-to-point TPID requirements with the intermediate transport.

Incorrect Answers

A:

The offered action is: Some intermediate Layer 2 devices do not transport standard neighbor discovery frames. It is associated with this separate technical condition: Some intermediate Layer 2 devices do not transport standard neighbor discovery frames. The actual incident concerns a different dependency: Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. The corresponding change is: Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery.

B:

Virtual tenant separation does not create independent physical power supplies. That may occur elsewhere, but the evidence at the Ivystone enterprise network team instead points to the fact that mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery.

C:

The offered alternative is: Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. It addresses this separate failure mode: Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. In the current case, the observed mechanism is: Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. The keyed action, Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery., targets that condition more directly.

Question 447

At the Ivystone enterprise network team, an inter-switch link traverses a provider service using unexpected VLAN EtherType settings and discovery is intermittent. What is the strongest acceptance test for this change?

  1. A test discovers both switches over the corrected point-to-point transport
  2. A controlled primary path failure retains switch inventory and permitted services
  3. A test tenant authentication policy works without enabling unsupported port features
  4. The setting persists after synchronization and a controlled switch restart

Explanation

Correct Answer

A:

Because mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery, the required evidence must show that a test discovers both switches over the corrected point-to-point transport. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Ivystone enterprise network team, a result about fortilink network transport failover would not show that the team corrected the failure where mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery.

C:

A test tenant authentication policy works without enabling unsupported port features. That result would test a control for this other failure: Multi-VDOM shared ports expose a defined subset of switch security capabilities. The question instead requires evidence for: Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. The direct outcome to verify is: A test discovers both switches over the corrected point-to-point transport.

D:

The offered observation is: The setting persists after synchronization and a controlled switch restart. It would support the separate mechanism: A FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller. In this case the decisive dependency is: Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. The original keyed verification is: A test discovers both switches over the corrected point-to-point transport.

Question 448

At the Ivystone enterprise network team, an inter-switch link traverses a provider service using unexpected VLAN EtherType settings and discovery is intermittent. Which setting or practice should be reviewed in future?

  1. Include managed switching in FortiGate HA acceptance tests
  2. Audit tenant VLAN membership on shared trunks
  3. Reconcile port export records during offboarding
  4. Review TPID compatibility during carrier handoff changes

Explanation

Correct Answer

D:

For the Ivystone enterprise network team, this maintenance action preserves the fix: review TPID compatibility during carrier handoff changes. It should be revisited as the workload evolves.

Incorrect Answers

A:

Include managed switching in FortiGate HA acceptance tests is not the primary recurring safeguard for this problem. The team should review TPID compatibility during carrier handoff changes. For the Ivystone enterprise network team, the direct corrective action is to align supported FortiLink point-to-point TPID requirements with the intermediate transport.

B:

Audit tenant VLAN membership on shared trunks. That safeguard would help prevent recurrence of: Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. The risk being reviewed here is instead: Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. The matching ongoing control is: Review TPID compatibility during carrier handoff changes.

C:

The suggested preventive check is: Reconcile port export records during offboarding. Its technical scope concerns: A stale VDOM port assignment leaves residual tenant access and operational ownership. This question asks how to sustain control over: Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. The more targeted safeguard is: Review TPID compatibility during carrier handoff changes.

Question 449

At the Westhaven network modernization program, an enterprise wants to manage FortiSwitch through VXLAN transport but assumes ordinary direct Ethernet behavior. Which corrective action best meets the requirement?

  1. Align supported FortiLink point-to-point TPID requirements with the intermediate transport
  2. Move that inspection to a supported boundary because DHCP snooping is not supported with QinQ
  3. Configure the intended FortiGate interface as a supported FortiLink management connection
  4. Validate the specific FortiLink on VXLAN prerequisites and supported platform feature constraints

Explanation

Correct Answer

D:

For the Westhaven network modernization program, the appropriate correction is to validate the specific FortiLink on VXLAN prerequisites and supported platform feature constraints. The decisive reason is that overlay transport requires explicit compatibility and control reachability beyond a regular copper uplink; acceptance evidence is that a tested overlay switch becomes authorized and stays managed with expected data isolation.

Incorrect Answers

A:

The option addresses the separate situation where mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. For this case, the more appropriate response is to validate the specific FortiLink on VXLAN prerequisites and supported platform feature constraints. For the Westhaven network modernization program, the direct corrective action is to validate the specific FortiLink on VXLAN prerequisites and supported platform feature constraints.

B:

The offered action is: Move that inspection to a supported boundary because DHCP snooping is not supported with QinQ. It is associated with this separate technical condition: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. The actual incident concerns a different dependency: Overlay transport requires explicit compatibility and control reachability beyond a regular copper uplink. The corresponding change is: Validate the specific FortiLink on VXLAN prerequisites and supported platform feature constraints.

C:

Configure the intended FortiGate interface as a supported FortiLink management connection can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to validate the specific FortiLink on VXLAN prerequisites and supported platform feature constraints. For the Westhaven network modernization program, the direct corrective action is to validate the specific FortiLink on VXLAN prerequisites and supported platform feature constraints.

Question 450

At the Westhaven network modernization program, an enterprise wants to manage FortiSwitch through VXLAN transport but assumes ordinary direct Ethernet behavior. Which underlying issue most directly explains this situation?

  1. Overlay transport requires explicit compatibility and control reachability beyond a regular copper uplink
  2. A linear FortiLink chain has single-link failure dependencies for devices beyond the break
  3. A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery
  4. Open management access from untrusted segments broadens credential attack surface

Explanation

Correct Answer

A:

The evidence indicates that overlay transport requires explicit compatibility and control reachability beyond a regular copper uplink. The appropriate response is to validate the specific FortiLink on VXLAN prerequisites and supported platform feature constraints and demonstrate that a tested overlay switch becomes authorized and stays managed with expected data isolation.

Incorrect Answers

B:

A linear FortiLink chain has single-link failure dependencies for devices beyond the break. That is not the mechanism that accounts for the stated failure at the Westhaven network modernization program.

C:

The offered principle is: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. In the source material it is associated with: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. This case has a different controlling cause: Overlay transport requires explicit compatibility and control reachability beyond a regular copper uplink. Its keyed mechanism is: Overlay transport requires explicit compatibility and control reachability beyond a regular copper uplink.

D:

Although open management access from untrusted segments broadens credential attack surface, the presented symptoms do not support that as the primary cause; they indicate that overlay transport requires explicit compatibility and control reachability beyond a regular copper uplink. For the Westhaven network modernization program, the direct corrective action is to validate the specific FortiLink on VXLAN prerequisites and supported platform feature constraints.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests