McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 47

Question 460

At the Greystone regional network integrator, a second-tier managed switch loses FortiLink after its parent switch is replaced without preserving the intended ISL. Which setting or practice should be reviewed in future?

  1. Document every downstream dependency when replacing an upstream switch
  2. Reassess topology only when availability requirements grow
  3. Forecast FortiLink address capacity before fleet expansion
  4. Document control-plane visibility versus tenant access boundaries

Explanation

Correct Answer

A:

After implementation, the team should document every downstream dependency when replacing an upstream switch as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

B:

Reassess topology only when availability requirements grow. That safeguard would help prevent recurrence of: A simple managed site can be operated without unnecessary high-availability interconnections. The risk being reviewed here is instead: Second-tier management depends on the operational first-tier inter-switch path. The matching ongoing control is: Document every downstream dependency when replacing an upstream switch.

C:

The suggested preventive check is: Forecast FortiLink address capacity before fleet expansion. Its technical scope concerns: Switch discovery and controller communication require nonconflicting usable management addresses. This question asks how to sustain control over: Second-tier management depends on the operational first-tier inter-switch path. The more targeted safeguard is: Document every downstream dependency when replacing an upstream switch.

D:

Document control-plane visibility versus tenant access boundaries. That safeguard would help prevent recurrence of: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. The risk being reviewed here is instead: Second-tier management depends on the operational first-tier inter-switch path. The matching ongoing control is: Document every downstream dependency when replacing an upstream switch.

Question 461

At the Lindenport data network services firm, a distribution pair is installed as independent uplinks despite a requirement to survive either switch failure without loops. Which corrective action best meets the requirement?

  1. Wire and configure an HA-compatible FortiLink topology with matching active-controller access
  2. Move that inspection to a supported boundary because DHCP snooping is not supported with QinQ
  3. Authorize the intended switch serial number through the FortiGate controller after confirming physical identity
  4. Use the supported MCLAG peer-group topology and coordinated inter-chassis trunk

Explanation

Correct Answer

D:

For the Lindenport data network services firm, the appropriate correction is to use the supported MCLAG peer-group topology and coordinated inter-chassis trunk. The decisive reason is that multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection; acceptance evidence is that either peer can be disabled while the access test remains connected.

Incorrect Answers

A:

The option addresses the separate situation where failing over the firewall does not help if the promoted member lacks an operational FortiLink path. For this case, the more appropriate response is to use the supported MCLAG peer-group topology and coordinated inter-chassis trunk. For the Lindenport data network services firm, the direct corrective action is to use the supported MCLAG peer-group topology and coordinated inter-chassis trunk.

B:

The offered action is: Move that inspection to a supported boundary because DHCP snooping is not supported with QinQ. It is associated with this separate technical condition: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. The actual incident concerns a different dependency: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The corresponding change is: Use the supported MCLAG peer-group topology and coordinated inter-chassis trunk.

C:

Authorize the intended switch serial number through the FortiGate controller after confirming physical identity can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to use the supported MCLAG peer-group topology and coordinated inter-chassis trunk. For the Lindenport data network services firm, the direct corrective action is to use the supported MCLAG peer-group topology and coordinated inter-chassis trunk.

Question 462

At the Lindenport data network services firm, a distribution pair is installed as independent uplinks despite a requirement to survive either switch failure without loops. Which underlying issue most directly explains this situation?

  1. Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection
  2. Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation
  3. Open management access from untrusted segments broadens credential attack surface
  4. The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS

Explanation

Correct Answer

A:

The evidence indicates that multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The appropriate response is to use the supported MCLAG peer-group topology and coordinated inter-chassis trunk and demonstrate that either peer can be disabled while the access test remains connected.

Incorrect Answers

B:

Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. That is not the mechanism that accounts for the stated failure at the Lindenport data network services firm.

C:

The offered principle is: Open management access from untrusted segments broadens credential attack surface. In the source material it is associated with: Open management access from untrusted segments broadens credential attack surface. This case has a different controlling cause: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. Its keyed mechanism is: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection.

D:

Although the GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS, the presented symptoms do not support that as the primary cause; they indicate that multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. For the Lindenport data network services firm, the direct corrective action is to use the supported MCLAG peer-group topology and coordinated inter-chassis trunk.

Question 463

At the Lindenport data network services firm, a distribution pair is installed as independent uplinks despite a requirement to survive either switch failure without loops. What evidence would justify considering this concern addressed?

  1. An HA failover preserves switch authorization and the intended user network
  2. Guest access is blocked while an authorized administrator can manage the switch
  3. The tenant retains permitted connectivity and no orphaned port allocation remains
  4. Either peer can be disabled while the access test remains connected

Explanation

Correct Answer

D:

This is the relevant acceptance result: either peer can be disabled while the access test remains connected. It demonstrates the outcome of choosing to use the supported MCLAG peer-group topology and coordinated inter-chassis trunk.

Incorrect Answers

A:

An HA failover preserves switch authorization and the intended user network. That result would test a control for this other failure: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. The question instead requires evidence for: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The direct outcome to verify is: Either peer can be disabled while the access test remains connected.

B:

The offered observation is: Guest access is blocked while an authorized administrator can manage the switch. It would support the separate mechanism: Open management access from untrusted segments broadens credential attack surface. In this case the decisive dependency is: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The original keyed verification is: Either peer can be disabled while the access test remains connected.

C:

The tenant retains permitted connectivity and no orphaned port allocation remains. That result would test a control for this other failure: Changing VDOM ownership can leave obsolete VLAN references and inaccessible management objects. The question instead requires evidence for: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The direct outcome to verify is: Either peer can be disabled while the access test remains connected.

Question 464

At the Lindenport data network services firm, a distribution pair is installed as independent uplinks despite a requirement to survive either switch failure without loops. How should the organization sustain the improvement?

  1. Verify peer group configuration after firmware upgrades
  2. Validate port-specific topology constraints before branch construction
  3. Audit template drift during firmware and topology changes
  4. Audit service and customer tag assignments during onboarding

Explanation

Correct Answer

A:

The team should verify peer group configuration after firmware upgrades. That recurring practice targets the same weakness, namely that multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection.

Incorrect Answers

B:

Validate port-specific topology constraints before branch construction. That safeguard would help prevent recurrence of: The documented out-of-band mgmt-port Layer 3 mode supports a single FortiSwitch island member. The risk being reviewed here is instead: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The matching ongoing control is: Verify peer group configuration after firmware upgrades.

C:

That routine supports controller switch profile inheritance, but the relevant ongoing risk requires the team to verify peer group configuration after firmware upgrades. For the Lindenport data network services firm, the direct corrective action is to use the supported MCLAG peer-group topology and coordinated inter-chassis trunk.

D:

Audit service and customer tag assignments during onboarding. That safeguard would help prevent recurrence of: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. The risk being reviewed here is instead: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The matching ongoing control is: Verify peer group configuration after firmware upgrades.

Question 465

At the Zincbridge switching consultancy, a remote site has primary and backup management paths but no validation of the backup FortiLink route. Which approach best resolves the described issue?

  1. Ensure every FortiSwitch in the same island is assigned to one supported controller
  2. Recreate or reassign supported tenant VLAN interfaces and switch-port ownership under a controlled migration
  3. Bring up and validate the supported upstream FortiLink path before onboarding dependent devices
  4. Test and document supported FortiLink path failover and controller reachability end to end

Explanation

Correct Answer

D:

Test and document supported FortiLink path failover and controller reachability end to end is the best response because a configured backup interface does not prove switch management survives an upstream path outage. A focused validation would establish that a controlled primary path failure retains switch inventory and permitted services.

Incorrect Answers

A:

Ensure every FortiSwitch in the same island is assigned to one supported controller can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to test and document supported FortiLink path failover and controller reachability end to end. For the Zincbridge switching consultancy, the direct corrective action is to test and document supported FortiLink path failover and controller reachability end to end.

B:

The offered action is: Recreate or reassign supported tenant VLAN interfaces and switch-port ownership under a controlled migration. It is associated with this separate technical condition: Changing VDOM ownership can leave obsolete VLAN references and inaccessible management objects. The actual incident concerns a different dependency: A configured backup interface does not prove switch management survives an upstream path outage. The corresponding change is: Test and document supported FortiLink path failover and controller reachability end to end.

C:

This alternative would be suitable where downstream management discovery depends on operational and permitted upstream switching paths. It does not by itself resolve the need to test and document supported FortiLink path failover and controller reachability end to end. For the Zincbridge switching consultancy, the direct corrective action is to test and document supported FortiLink path failover and controller reachability end to end.

Question 466

At the Zincbridge switching consultancy, a remote site has primary and backup management paths but no validation of the backup FortiLink route. Which explanation best accounts for the concern?

  1. A simple managed site can be operated without unnecessary high-availability interconnections
  2. FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features
  3. A configured backup interface does not prove switch management survives an upstream path outage
  4. The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS

Explanation

Correct Answer

C:

The situation shows that a configured backup interface does not prove switch management survives an upstream path outage, rather than merely a monitoring or presentation issue. Remediation is to test and document supported FortiLink path failover and controller reachability end to end.

Incorrect Answers

A:

The offered principle is: A simple managed site can be operated without unnecessary high-availability interconnections. In the source material it is associated with: A simple managed site can be operated without unnecessary high-availability interconnections. This case has a different controlling cause: A configured backup interface does not prove switch management survives an upstream path outage. Its keyed mechanism is: A configured backup interface does not prove switch management survives an upstream path outage.

B:

Although fortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features, the presented symptoms do not support that as the primary cause; they indicate that a configured backup interface does not prove switch management survives an upstream path outage. For the Zincbridge switching consultancy, the direct corrective action is to test and document supported FortiLink path failover and controller reachability end to end.

D:

The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. That may occur elsewhere, but the evidence at the Zincbridge switching consultancy instead points to the fact that a configured backup interface does not prove switch management survives an upstream path outage.

Question 467

At the Zincbridge switching consultancy, a remote site has primary and backup management paths but no validation of the backup FortiLink route. Which test result best shows the requirement is met?

  1. A planned ISL failure retains reachability to the remaining managed units
  2. A cable tracing test matches the controller port description with the physical outlet
  3. A controlled primary path failure retains switch inventory and permitted services
  4. The provider receives the expected double-tagged frame and returns traffic correctly

Explanation

Correct Answer

C:

Because a configured backup interface does not prove switch management survives an upstream path outage, the required evidence must show that a controlled primary path failure retains switch inventory and permitted services. A healthy endpoint status alone is insufficient.

Incorrect Answers

A:

A planned ISL failure retains reachability to the remaining managed units. That result would test a control for this other failure: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. The question instead requires evidence for: A configured backup interface does not prove switch management survives an upstream path outage. The direct outcome to verify is: A controlled primary path failure retains switch inventory and permitted services.

B:

The offered observation is: A cable tracing test matches the controller port description with the physical outlet. It would support the separate mechanism: Missing port identity makes correct endpoint provisioning and incident isolation harder. In this case the decisive dependency is: A configured backup interface does not prove switch management survives an upstream path outage. The original keyed verification is: A controlled primary path failure retains switch inventory and permitted services.

D:

At the Zincbridge switching consultancy, a result about qinq tpid profile requirement would not show that the team corrected the failure where a configured backup interface does not prove switch management survives an upstream path outage.

Question 468

At the Zincbridge switching consultancy, a remote site has primary and backup management paths but no validation of the backup FortiLink route. Which ongoing control best prevents this issue from recurring?

  1. Audit routed management changes for unauthorized NAT
  2. Test redundant FortiLink transport at each site review
  3. Track authorized device inventory and decommission stale serials
  4. Audit administration protocols and source restrictions routinely

Explanation

Correct Answer

B:

The needed prevention is to test redundant FortiLink transport at each site review. It directly sustains the original change to test and document supported FortiLink path failover and controller reachability end to end.

Incorrect Answers

A:

That routine supports fortilink l3 nat unsupported, but the relevant ongoing risk requires the team to test redundant FortiLink transport at each site review. For the Zincbridge switching consultancy, the direct corrective action is to test and document supported FortiLink path failover and controller reachability end to end.

C:

Track authorized device inventory and decommission stale serials is not the primary recurring safeguard for this problem. The team should test redundant FortiLink transport at each site review. For the Zincbridge switching consultancy, the direct corrective action is to test and document supported FortiLink path failover and controller reachability end to end.

D:

Audit administration protocols and source restrictions routinely. That safeguard would help prevent recurrence of: Open management access from untrusted segments broadens credential attack surface. The risk being reviewed here is instead: A configured backup interface does not prove switch management survives an upstream path outage. The matching ongoing control is: Test redundant FortiLink transport at each site review.

Question 469

At the Orchardfield infrastructure service operator, two customer tenants share one managed switch but the administrator assigns all ports only in the root FortiGate VDOM. Which implementation choice best addresses the situation?

  1. Create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope
  2. Resize and validate the supported FortiLink management address pool or topology addressing plan
  3. Export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership
  4. Use the supported MCLAG peer-group topology and coordinated inter-chassis trunk

Explanation

Correct Answer

C:

This is the direct FortiSwitch 7.6 administration remedy: export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership. The observed risk is that managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name; a passing acceptance check would show that each tenant administrator sees and configures only ports assigned to its VDOM.

Incorrect Answers

A:

This alternative would be suitable where tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. It does not by itself resolve the need to export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership. For the Orchardfield infrastructure service operator, the direct corrective action is to export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership.

B:

Resize and validate the supported FortiLink management address pool or topology addressing plan addresses a different kind of problem: switch discovery and controller communication require nonconflicting usable management addresses. Here the reported weakness is that managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. For the Orchardfield infrastructure service operator, the direct corrective action is to export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership.

D:

The offered alternative is: Use the supported MCLAG peer-group topology and coordinated inter-chassis trunk. It addresses this separate failure mode: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. In the current case, the observed mechanism is: Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. The keyed action, Export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership., targets that condition more directly.

Question 470

At the Orchardfield infrastructure service operator, two customer tenants share one managed switch but the administrator assigns all ports only in the root FortiGate VDOM. What risk should the team identify as the primary issue?

  1. Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure
  2. The documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers
  3. Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name
  4. Management-plane routing and access controls are separate from user data forwarding

Explanation

Correct Answer

C:

The evidence indicates that managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. The appropriate response is to export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership and demonstrate that each tenant administrator sees and configures only ports assigned to its VDOM.

Incorrect Answers

A:

The offered action is: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. It is associated with this separate technical condition: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. The actual incident concerns a different dependency: Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. The corresponding change is: Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name.

B:

The documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers. That may occur elsewhere, but the evidence at the Orchardfield infrastructure service operator instead points to the fact that managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name.

D:

Management-plane routing and access controls are separate from user data forwarding. That is not the mechanism that accounts for the stated failure at the Orchardfield infrastructure service operator.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests