McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 49

Question 480

At the Oakport network modernization program, a tenant administrator creates a VLAN in its VDOM but cannot see it on an owned managed switch port. Which ongoing control best prevents this issue from recurring?

  1. Reconcile switch-port VDOM ownership after tenant moves
  2. Reassess topology only when availability requirements grow
  3. Document root and tenant responsibilities for VLAN changes
  4. Review split interface behavior after changing aggregation

Explanation

Correct Answer

C:

After implementation, the team should document root and tenant responsibilities for VLAN changes as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

A:

That routine supports tenant port export, but the relevant ongoing risk requires the team to document root and tenant responsibilities for VLAN changes. For the Oakport network modernization program, the direct corrective action is to create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope.

B:

Reassess topology only when availability requirements grow. That safeguard would help prevent recurrence of: A simple managed site can be operated without unnecessary high-availability interconnections. The risk being reviewed here is instead: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. The matching ongoing control is: Document root and tenant responsibilities for VLAN changes.

D:

Review split interface behavior after changing aggregation. That safeguard would help prevent recurrence of: Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more. The risk being reviewed here is instead: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. The matching ongoing control is: Document root and tenant responsibilities for VLAN changes.

Question 481

At the Claremont managed-network provider, a managed trunk must carry separate VLANs belonging to two FortiGate VDOMs but a planner assigns the port exclusively to one. Which implementation choice best addresses the situation?

  1. Export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership
  2. Align supported FortiLink point-to-point TPID requirements with the intermediate transport
  3. Move to a supported ring or redundant FortiLink topology with verified control-plane continuity
  4. Configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port

Explanation

Correct Answer

D:

The primary failure mode is that physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. The proposed action directly fixes it by requiring the team to configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port; afterward, verify that each tenant traffic tag remains distinct and only its policy-controlled path works.

Incorrect Answers

A:

This alternative would be suitable where managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. It does not by itself resolve the need to configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port. For the Claremont managed-network provider, the direct corrective action is to configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port.

B:

Align supported FortiLink point-to-point TPID requirements with the intermediate transport addresses a different kind of problem: mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. Here the reported weakness is that physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. For the Claremont managed-network provider, the direct corrective action is to configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port.

C:

The option addresses the separate situation where a linear FortiLink chain has single-link failure dependencies for devices beyond the break. For this case, the more appropriate response is to configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port. For the Claremont managed-network provider, the direct corrective action is to configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port.

Question 482

At the Claremont managed-network provider, a managed trunk must carry separate VLANs belonging to two FortiGate VDOMs but a planner assigns the port exclusively to one. What risk should the team identify as the primary issue?

  1. Virtual tenant separation does not create independent physical power supplies
  2. Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration
  3. Open management access from untrusted segments broadens credential attack surface
  4. A linear FortiLink chain has single-link failure dependencies for devices beyond the break

Explanation

Correct Answer

B:

This identifies the root issue: physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. At the Claremont managed-network provider, the team should therefore configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port.

Incorrect Answers

A:

The offered action is: Virtual tenant separation does not create independent physical power supplies. It is associated with this separate technical condition: Virtual tenant separation does not create independent physical power supplies. The actual incident concerns a different dependency: Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. The corresponding change is: Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration.

C:

The offered alternative is: Open management access from untrusted segments broadens credential attack surface. It addresses this separate failure mode: Open management access from untrusted segments broadens credential attack surface. In the current case, the observed mechanism is: Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. The keyed action, Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration., targets that condition more directly.

D:

A linear FortiLink chain has single-link failure dependencies for devices beyond the break. That is not the mechanism that accounts for the stated failure at the Claremont managed-network provider.

Question 483

At the Claremont managed-network provider, a managed trunk must carry separate VLANs belonging to two FortiGate VDOMs but a planner assigns the port exclusively to one. What is the strongest acceptance test for this change?

  1. The tenant retains permitted connectivity and no orphaned port allocation remains
  2. Each tenant traffic tag remains distinct and only its policy-controlled path works
  3. Both devices discover and exchange approved management and data through the bridge
  4. Either peer can be disabled while the access test remains connected

Explanation

Correct Answer

B:

The team can confirm the fix by showing that each tenant traffic tag remains distinct and only its policy-controlled path works. This aligns with the corrective design to configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port.

Incorrect Answers

A:

The tenant retains permitted connectivity and no orphaned port allocation remains. That result would test a control for this other failure: Changing VDOM ownership can leave obsolete VLAN references and inaccessible management objects. The question instead requires evidence for: Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. The direct outcome to verify is: Each tenant traffic tag remains distinct and only its policy-controlled path works.

C:

Both devices discover and exchange approved management and data through the bridge. That result would test a control for this other failure: Some intermediate Layer 2 devices do not transport standard neighbor discovery frames. The question instead requires evidence for: Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. The direct outcome to verify is: Each tenant traffic tag remains distinct and only its policy-controlled path works.

D:

The offered observation is: Either peer can be disabled while the access test remains connected. It would support the separate mechanism: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. In this case the decisive dependency is: Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. The original keyed verification is: Each tenant traffic tag remains distinct and only its policy-controlled path works.

Question 484

At the Claremont managed-network provider, a managed trunk must carry separate VLANs belonging to two FortiGate VDOMs but a planner assigns the port exclusively to one. Which setting or practice should be reviewed in future?

  1. Review feature compatibility before exporting security-sensitive ports
  2. Require save and backup checks before closing standalone changes
  3. Review FortiGate administrator roles each quarter
  4. Audit tenant VLAN membership on shared trunks

Explanation

Correct Answer

D:

For the Claremont managed-network provider, this maintenance action preserves the fix: audit tenant VLAN membership on shared trunks. It should be revisited as the workload evolves.

Incorrect Answers

A:

Review feature compatibility before exporting security-sensitive ports is not the primary recurring safeguard for this problem. The team should audit tenant VLAN membership on shared trunks. For the Claremont managed-network provider, the direct corrective action is to configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port.

B:

Require save and backup checks before closing standalone changes. That safeguard would help prevent recurrence of: Unsaved changes in active configuration can disappear during restart. The risk being reviewed here is instead: Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. The matching ongoing control is: Audit tenant VLAN membership on shared trunks.

C:

The suggested preventive check is: Review FortiGate administrator roles each quarter. Its technical scope concerns: Excess controller privileges allow unintended changes to managed switch configurations. This question asks how to sustain control over: Physical port sharing and VLAN ownership across VDOMs require deliberate controller configuration. The more targeted safeguard is: Audit tenant VLAN membership on shared trunks.

Question 485

At the Redhaven branch IT department, a tenant VLAN cannot be chosen as a native VLAN in the root VDOM GUI for a port controlled in another VDOM. Which corrective action best meets the requirement?

  1. Verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch
  2. Validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller
  3. Use the supported FortiOS CLI workaround for cross-VDOM native VLAN assignment after reviewing ownership
  4. Follow supported management-port Layer 3 design limits or use an appropriate in-band topology

Explanation

Correct Answer

C:

The reported facts support this change rather than a general platform replacement. The team should use the supported FortiOS CLI workaround for cross-VDOM native VLAN assignment after reviewing ownership because the GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. A suitable test confirms that a controlled endpoint enters the correct tenant native VLAN after CLI configuration.

Incorrect Answers

A:

The option addresses the separate situation where physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. For this case, the more appropriate response is to use the supported FortiOS CLI workaround for cross-VDOM native VLAN assignment after reviewing ownership. For the Redhaven branch IT department, the direct corrective action is to use the supported FortiOS CLI workaround for cross-VDOM native VLAN assignment after reviewing ownership.

B:

The offered action is: Validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller. It is associated with this separate technical condition: Firmware version mismatches can break expected FortiLink and feature operation. The actual incident concerns a different dependency: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. The corresponding change is: Use the supported FortiOS CLI workaround for cross-VDOM native VLAN assignment after reviewing ownership.

D:

The offered alternative is: Follow supported management-port Layer 3 design limits or use an appropriate in-band topology. It addresses this separate failure mode: The documented out-of-band mgmt-port Layer 3 mode supports a single FortiSwitch island member. In the current case, the observed mechanism is: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. The keyed action, Use the supported FortiOS CLI workaround for cross-VDOM native VLAN assignment after reviewing ownership., targets that condition more directly.

Question 486

At the Redhaven branch IT department, a tenant VLAN cannot be chosen as a native VLAN in the root VDOM GUI for a port controlled in another VDOM. Which underlying issue most directly explains this situation?

  1. The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS
  2. Not all advanced switch features are available on shared tenant ports
  3. Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection
  4. Failing over the firewall does not help if the promoted member lacks an operational FortiLink path

Explanation

Correct Answer

A:

The evidence indicates that the GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. The appropriate response is to use the supported FortiOS CLI workaround for cross-VDOM native VLAN assignment after reviewing ownership and demonstrate that a controlled endpoint enters the correct tenant native VLAN after CLI configuration.

Incorrect Answers

B:

Not all advanced switch features are available on shared tenant ports. That is not the mechanism that accounts for the stated failure at the Redhaven branch IT department.

C:

The offered principle is: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. In the source material it is associated with: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. This case has a different controlling cause: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. Its keyed mechanism is: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS.

D:

Although failing over the firewall does not help if the promoted member lacks an operational FortiLink path, the presented symptoms do not support that as the primary cause; they indicate that the GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. For the Redhaven branch IT department, the direct corrective action is to use the supported FortiOS CLI workaround for cross-VDOM native VLAN assignment after reviewing ownership.

Question 487

At the Redhaven branch IT department, a tenant VLAN cannot be chosen as a native VLAN in the root VDOM GUI for a port controlled in another VDOM. What evidence would justify considering this concern addressed?

  1. A controlled endpoint enters the correct tenant native VLAN after CLI configuration
  2. Each tenant administrator sees and configures only ports assigned to its VDOM
  3. Each authorized switch obtains a distinct working management address and stays connected
  4. A test unknown switch stays unauthorized while the approved unit joins successfully

Explanation

Correct Answer

A:

This tests the real business behavior: a controlled endpoint enters the correct tenant native VLAN after CLI configuration. It specifically checks whether the risk that the GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS has been reduced.

Incorrect Answers

B:

The offered observation is: Each tenant administrator sees and configures only ports assigned to its VDOM. It would support the separate mechanism: Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. In this case the decisive dependency is: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. The original keyed verification is: A controlled endpoint enters the correct tenant native VLAN after CLI configuration.

C:

Each authorized switch obtains a distinct working management address and stays connected. That result would test a control for this other failure: Switch discovery and controller communication require nonconflicting usable management addresses. The question instead requires evidence for: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. The direct outcome to verify is: A controlled endpoint enters the correct tenant native VLAN after CLI configuration.

D:

The offered observation is: A test unknown switch stays unauthorized while the approved unit joins successfully. It would support the separate mechanism: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. In this case the decisive dependency is: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. The original keyed verification is: A controlled endpoint enters the correct tenant native VLAN after CLI configuration.

Question 488

At the Redhaven branch IT department, a tenant VLAN cannot be chosen as a native VLAN in the root VDOM GUI for a port controlled in another VDOM. How should the organization sustain the improvement?

  1. Reconcile port export records during offboarding
  2. Review zero-touch profiles when sites are introduced
  3. Recheck cross-VDOM VLAN settings after firmware upgrades
  4. Track authorized device inventory and decommission stale serials

Explanation

Correct Answer

C:

The continuing safeguard is to recheck cross-VDOM VLAN settings after firmware upgrades. It helps avoid the original condition: the GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS.

Incorrect Answers

A:

The suggested preventive check is: Reconcile port export records during offboarding. Its technical scope concerns: A stale VDOM port assignment leaves residual tenant access and operational ownership. This question asks how to sustain control over: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. The more targeted safeguard is: Recheck cross-VDOM VLAN settings after firmware upgrades.

B:

Review zero-touch profiles when sites are introduced. That safeguard would help prevent recurrence of: Manual per-device setup increases configuration drift and delays consistent provisioning. The risk being reviewed here is instead: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. The matching ongoing control is: Recheck cross-VDOM VLAN settings after firmware upgrades.

D:

Track authorized device inventory and decommission stale serials. That safeguard would help prevent recurrence of: FortiLink discovery does not itself guarantee the switch is authorized to receive configuration. The risk being reviewed here is instead: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. The matching ongoing control is: Recheck cross-VDOM VLAN settings after firmware upgrades.

Question 489

At the Dunbridge data network services firm, a multi-tenant port design depends on DHCP snooping directly on FortiSwitch ports exported for VDOM sharing. Which approach best resolves the described issue?

  1. Budget physical PoE headroom across both tenant port allocations and enforce supported priorities
  2. Choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports
  3. Use the supported MCLAG peer-group topology and coordinated inter-chassis trunk
  4. Configure its supported management IP route and permitted administrative access services

Explanation

Correct Answer

B:

For the Dunbridge data network services firm, the appropriate correction is to choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports. The decisive reason is that the documented shared FortiSwitch port feature set does not include DHCP snooping; acceptance evidence is that a lab review shows enforcement without assuming unsupported snooping on that shared port.

Incorrect Answers

A:

Budget physical PoE headroom across both tenant port allocations and enforce supported priorities can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports. For the Dunbridge data network services firm, the direct corrective action is to choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports.

C:

This alternative would be suitable where multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. It does not by itself resolve the need to choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports. For the Dunbridge data network services firm, the direct corrective action is to choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports.

D:

Configure its supported management IP route and permitted administrative access services addresses a different kind of problem: management-plane routing and access controls are separate from user data forwarding. Here the reported weakness is that the documented shared FortiSwitch port feature set does not include DHCP snooping. For the Dunbridge data network services firm, the direct corrective action is to choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports.

Question 490

At the Dunbridge data network services firm, a multi-tenant port design depends on DHCP snooping directly on FortiSwitch ports exported for VDOM sharing. Which explanation best accounts for the concern?

  1. The documented shared FortiSwitch port feature set does not include DHCP snooping
  2. The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS
  3. Two physical uplinks to independent peers are not a coordinated aggregate by default
  4. A linear FortiLink chain has single-link failure dependencies for devices beyond the break

Explanation

Correct Answer

A:

The strongest explanation is that the documented shared FortiSwitch port feature set does not include DHCP snooping. This accounts for the outcome and supports the action to choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports.

Incorrect Answers

B:

Although the GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS, the presented symptoms do not support that as the primary cause; they indicate that the documented shared FortiSwitch port feature set does not include DHCP snooping. For the Dunbridge data network services firm, the direct corrective action is to choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports.

C:

The offered principle is: Two physical uplinks to independent peers are not a coordinated aggregate by default. In the source material it is associated with: Two physical uplinks to independent peers are not a coordinated aggregate by default. This case has a different controlling cause: The documented shared FortiSwitch port feature set does not include DHCP snooping. Its keyed mechanism is: The documented shared FortiSwitch port feature set does not include DHCP snooping.

D:

A linear FortiLink chain has single-link failure dependencies for devices beyond the break. That may occur elsewhere, but the evidence at the Dunbridge data network services firm instead points to the fact that the documented shared FortiSwitch port feature set does not include DHCP snooping.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests