McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 50

Question 490

At the Dunbridge data network services firm, a multi-tenant port design depends on DHCP snooping directly on FortiSwitch ports exported for VDOM sharing. Which explanation best accounts for the concern?

  1. The documented shared FortiSwitch port feature set does not include DHCP snooping
  2. The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS
  3. Two physical uplinks to independent peers are not a coordinated aggregate by default
  4. A linear FortiLink chain has single-link failure dependencies for devices beyond the break

Explanation

Correct Answer

A:

The strongest explanation is that the documented shared FortiSwitch port feature set does not include DHCP snooping. This accounts for the outcome and supports the action to choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports.

Incorrect Answers

B:

Although the GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS, the presented symptoms do not support that as the primary cause; they indicate that the documented shared FortiSwitch port feature set does not include DHCP snooping. For the Dunbridge data network services firm, the direct corrective action is to choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports.

C:

The offered principle is: Two physical uplinks to independent peers are not a coordinated aggregate by default. In the source material it is associated with: Two physical uplinks to independent peers are not a coordinated aggregate by default. This case has a different controlling cause: The documented shared FortiSwitch port feature set does not include DHCP snooping. Its keyed mechanism is: The documented shared FortiSwitch port feature set does not include DHCP snooping.

D:

A linear FortiLink chain has single-link failure dependencies for devices beyond the break. That may occur elsewhere, but the evidence at the Dunbridge data network services firm instead points to the fact that the documented shared FortiSwitch port feature set does not include DHCP snooping.

Question 491

At the Dunbridge data network services firm, a multi-tenant port design depends on DHCP snooping directly on FortiSwitch ports exported for VDOM sharing. Which test result best shows the requirement is met?

  1. A lab review shows enforcement without assuming unsupported snooping on that shared port
  2. Each tenant administrator sees and configures only ports assigned to its VDOM
  3. Each authorized switch obtains a distinct working management address and stays connected
  4. The island discovers its FortiGate over a correctly routed unNATed path

Explanation

Correct Answer

A:

At the Dunbridge data network services firm, evidence that a lab review shows enforcement without assuming unsupported snooping on that shared port directly validates the correction, instead of testing a neighboring service.

Incorrect Answers

B:

The offered observation is: Each tenant administrator sees and configures only ports assigned to its VDOM. It would support the separate mechanism: Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. In this case the decisive dependency is: The documented shared FortiSwitch port feature set does not include DHCP snooping. The original keyed verification is: A lab review shows enforcement without assuming unsupported snooping on that shared port.

C:

Each authorized switch obtains a distinct working management address and stays connected. That result would test a control for this other failure: Switch discovery and controller communication require nonconflicting usable management addresses. The question instead requires evidence for: The documented shared FortiSwitch port feature set does not include DHCP snooping. The direct outcome to verify is: A lab review shows enforcement without assuming unsupported snooping on that shared port.

D:

At the Dunbridge data network services firm, a result about fortilink l3 nat unsupported would not show that the team corrected the failure where the documented shared FortiSwitch port feature set does not include DHCP snooping.

Question 492

At the Dunbridge data network services firm, a multi-tenant port design depends on DHCP snooping directly on FortiSwitch ports exported for VDOM sharing. Which ongoing control best prevents this issue from recurring?

  1. Reconcile port export records during offboarding
  2. Require save and backup checks before closing standalone changes
  3. Audit the management mode before every switch change
  4. Review feature compatibility before exporting security-sensitive ports

Explanation

Correct Answer

D:

This control works beyond the initial remediation because it requires the team to review feature compatibility before exporting security-sensitive ports.

Incorrect Answers

A:

That routine supports switch port export revocation, but the relevant ongoing risk requires the team to review feature compatibility before exporting security-sensitive ports. For the Dunbridge data network services firm, the direct corrective action is to choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports.

B:

Require save and backup checks before closing standalone changes. That safeguard would help prevent recurrence of: Unsaved changes in active configuration can disappear during restart. The risk being reviewed here is instead: The documented shared FortiSwitch port feature set does not include DHCP snooping. The matching ongoing control is: Review feature compatibility before exporting security-sensitive ports.

C:

Audit the management mode before every switch change is not the primary recurring safeguard for this problem. The team should review feature compatibility before exporting security-sensitive ports. For the Dunbridge data network services firm, the direct corrective action is to choose a supported topology or alternate guardrail because DHCP snooping is unavailable on shared ports.

Question 493

At the Quayford switching consultancy, a tenant attaches hundreds of virtual endpoints to a shared access port without planning its dynamic MAC capacity. Which implementation choice best addresses the situation?

  1. Move that inspection to a supported boundary because DHCP snooping is not supported with QinQ
  2. Authorize the intended switch serial number through the FortiGate controller after confirming physical identity
  3. Apply a supported learning limit on eligible shared FortiSwitch ports and plan valid capacity
  4. Ensure every FortiSwitch in the same island is assigned to one supported controller

Explanation

Correct Answer

C:

This is the direct FortiSwitch 7.6 administration remedy: apply a supported learning limit on eligible shared FortiSwitch ports and plan valid capacity. The observed risk is that unbounded MAC learning can strain forwarding resources and cross-tenant expectations; a passing acceptance check would show that the approved number of learned addresses works and excess sources follow policy.

Incorrect Answers

A:

This alternative would be suitable where fortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. It does not by itself resolve the need to apply a supported learning limit on eligible shared FortiSwitch ports and plan valid capacity. For the Quayford switching consultancy, the direct corrective action is to apply a supported learning limit on eligible shared FortiSwitch ports and plan valid capacity.

B:

Authorize the intended switch serial number through the FortiGate controller after confirming physical identity addresses a different kind of problem: fortiLink discovery does not itself guarantee the switch is authorized to receive configuration. Here the reported weakness is that unbounded MAC learning can strain forwarding resources and cross-tenant expectations. For the Quayford switching consultancy, the direct corrective action is to apply a supported learning limit on eligible shared FortiSwitch ports and plan valid capacity.

D:

The offered alternative is: Ensure every FortiSwitch in the same island is assigned to one supported controller. It addresses this separate failure mode: Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. In the current case, the observed mechanism is: Unbounded MAC learning can strain forwarding resources and cross-tenant expectations. The keyed action, Apply a supported learning limit on eligible shared FortiSwitch ports and plan valid capacity., targets that condition more directly.

Question 494

At the Quayford switching consultancy, a tenant attaches hundreds of virtual endpoints to a shared access port without planning its dynamic MAC capacity. What risk should the team identify as the primary issue?

  1. Virtual tenant separation does not create independent physical power supplies
  2. Unsaved changes in active configuration can disappear during restart
  3. Unbounded MAC learning can strain forwarding resources and cross-tenant expectations
  4. Excess controller privileges allow unintended changes to managed switch configurations

Explanation

Correct Answer

C:

The evidence indicates that unbounded MAC learning can strain forwarding resources and cross-tenant expectations. The appropriate response is to apply a supported learning limit on eligible shared FortiSwitch ports and plan valid capacity and demonstrate that the approved number of learned addresses works and excess sources follow policy.

Incorrect Answers

A:

The offered action is: Virtual tenant separation does not create independent physical power supplies. It is associated with this separate technical condition: Virtual tenant separation does not create independent physical power supplies. The actual incident concerns a different dependency: Unbounded MAC learning can strain forwarding resources and cross-tenant expectations. The corresponding change is: Unbounded MAC learning can strain forwarding resources and cross-tenant expectations.

B:

Unsaved changes in active configuration can disappear during restart. That may occur elsewhere, but the evidence at the Quayford switching consultancy instead points to the fact that unbounded MAC learning can strain forwarding resources and cross-tenant expectations.

D:

Excess controller privileges allow unintended changes to managed switch configurations. That is not the mechanism that accounts for the stated failure at the Quayford switching consultancy.

Question 495

At the Quayford switching consultancy, a tenant attaches hundreds of virtual endpoints to a shared access port without planning its dynamic MAC capacity. What is the strongest acceptance test for this change?

  1. The approved number of learned addresses works and excess sources follow policy
  2. Two different customer inner tags retain correct service mapping across the trunk
  3. A controlled primary-link outage moves operations to the standby link
  4. A tested overlay switch becomes authorized and stays managed with expected data isolation

Explanation

Correct Answer

A:

Because unbounded MAC learning can strain forwarding resources and cross-tenant expectations, the required evidence must show that the approved number of learned addresses works and excess sources follow policy. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Quayford switching consultancy, a result about qinq customer service mapping would not show that the team corrected the failure where unbounded MAC learning can strain forwarding resources and cross-tenant expectations.

C:

A controlled primary-link outage moves operations to the standby link. That result would test a control for this other failure: Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more. The question instead requires evidence for: Unbounded MAC learning can strain forwarding resources and cross-tenant expectations. The direct outcome to verify is: The approved number of learned addresses works and excess sources follow policy.

D:

The offered observation is: A tested overlay switch becomes authorized and stays managed with expected data isolation. It would support the separate mechanism: Overlay transport requires explicit compatibility and control reachability beyond a regular copper uplink. In this case the decisive dependency is: Unbounded MAC learning can strain forwarding resources and cross-tenant expectations. The original keyed verification is: The approved number of learned addresses works and excess sources follow policy.

Question 496

At the Quayford switching consultancy, a tenant attaches hundreds of virtual endpoints to a shared access port without planning its dynamic MAC capacity. Which setting or practice should be reviewed in future?

  1. Review tenant device forecasts before increasing limits
  2. Retest the shared-port feature matrix after version changes
  3. Review TPID compatibility during carrier handoff changes
  4. Audit management addresses and access-source restrictions

Explanation

Correct Answer

A:

After implementation, the team should review tenant device forecasts before increasing limits as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

B:

Retest the shared-port feature matrix after version changes. That safeguard would help prevent recurrence of: Multi-VDOM shared ports expose a defined subset of switch security capabilities. The risk being reviewed here is instead: Unbounded MAC learning can strain forwarding resources and cross-tenant expectations. The matching ongoing control is: Review tenant device forecasts before increasing limits.

C:

The suggested preventive check is: Review TPID compatibility during carrier handoff changes. Its technical scope concerns: Mismatched provider tag EtherType can prevent expected encapsulated control traffic delivery. This question asks how to sustain control over: Unbounded MAC learning can strain forwarding resources and cross-tenant expectations. The more targeted safeguard is: Review tenant device forecasts before increasing limits.

D:

Audit management addresses and access-source restrictions. That safeguard would help prevent recurrence of: Management-plane routing and access controls are separate from user data forwarding. The risk being reviewed here is instead: Unbounded MAC learning can strain forwarding resources and cross-tenant expectations. The matching ongoing control is: Review tenant device forecasts before increasing limits.

Question 497

At the Eastbrook infrastructure service operator, a provider wants tenant-specific egress queue behavior on a VDOM-shared FortiSwitch port without checking support. Which corrective action best meets the requirement?

  1. Use only supported per-port CoS egress queue policies and verify capability on the exact model
  2. Select a supported VLAN TPID profile consistently across the provider handoff
  3. Use supported managed-switch templates or controller policy objects for compatible site groups
  4. Use the supported Fortinet zero-touch management process with controlled authorizations and approved port templates

Explanation

Correct Answer

A:

This is the direct FortiSwitch 7.6 administration remedy: use only supported per-port CoS egress queue policies and verify capability on the exact model. The observed risk is that not all advanced switch features are available on shared tenant ports; a passing acceptance check would show that a two-tenant load test preserves the approved class treatment without leakage.

Incorrect Answers

B:

The offered action is: Select a supported VLAN TPID profile consistently across the provider handoff. It is associated with this separate technical condition: An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. The actual incident concerns a different dependency: Not all advanced switch features are available on shared tenant ports. The corresponding change is: Use only supported per-port CoS egress queue policies and verify capability on the exact model.

C:

Use supported managed-switch templates or controller policy objects for compatible site groups can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to use only supported per-port CoS egress queue policies and verify capability on the exact model. For the Eastbrook infrastructure service operator, the direct corrective action is to use only supported per-port CoS egress queue policies and verify capability on the exact model.

D:

The offered alternative is: Use the supported Fortinet zero-touch management process with controlled authorizations and approved port templates. It addresses this separate failure mode: Manual per-device setup increases configuration drift and delays consistent provisioning. In the current case, the observed mechanism is: Not all advanced switch features are available on shared tenant ports. The keyed action, Use only supported per-port CoS egress queue policies and verify capability on the exact model., targets that condition more directly.

Question 498

At the Eastbrook infrastructure service operator, a provider wants tenant-specific egress queue behavior on a VDOM-shared FortiSwitch port without checking support. Which underlying issue most directly explains this situation?

  1. A port exported to a pool may need a tenant claim step before use
  2. A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery
  3. Second-tier management depends on the operational first-tier inter-switch path
  4. Not all advanced switch features are available on shared tenant ports

Explanation

Correct Answer

D:

The problem stems from the fact that not all advanced switch features are available on shared tenant ports. A correct solution would use only supported per-port CoS egress queue policies and verify capability on the exact model and check that a two-tenant load test preserves the approved class treatment without leakage.

Incorrect Answers

A:

The offered principle is: A port exported to a pool may need a tenant claim step before use. In the source material it is associated with: A port exported to a pool may need a tenant claim step before use. This case has a different controlling cause: Not all advanced switch features are available on shared tenant ports. Its keyed mechanism is: Not all advanced switch features are available on shared tenant ports.

B:

A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. That is not the mechanism that accounts for the stated failure at the Eastbrook infrastructure service operator.

C:

The offered principle is: Second-tier management depends on the operational first-tier inter-switch path. In the source material it is associated with: Second-tier management depends on the operational first-tier inter-switch path. This case has a different controlling cause: Not all advanced switch features are available on shared tenant ports. Its keyed mechanism is: Not all advanced switch features are available on shared tenant ports.

Question 499

At the Eastbrook infrastructure service operator, a provider wants tenant-specific egress queue behavior on a VDOM-shared FortiSwitch port without checking support. What evidence would justify considering this concern addressed?

  1. A controlled endpoint enters the correct tenant native VLAN after CLI configuration
  2. A two-tenant load test preserves the approved class treatment without leakage
  3. The island stays manageable during supported single-peer link member tests
  4. Each authorized switch obtains a distinct working management address and stays connected

Explanation

Correct Answer

B:

The intended correction is to use only supported per-port CoS egress queue policies and verify capability on the exact model. The decisive verification is that a two-tenant load test preserves the approved class treatment without leakage, rather than only confirming configuration was saved.

Incorrect Answers

A:

A controlled endpoint enters the correct tenant native VLAN after CLI configuration. That result would test a control for this other failure: The GUI does not expose every cross-VDOM native VLAN assignment supported by FortiOS. The question instead requires evidence for: Not all advanced switch features are available on shared tenant ports. The direct outcome to verify is: A two-tenant load test preserves the approved class treatment without leakage.

C:

The island stays manageable during supported single-peer link member tests. That result would test a control for this other failure: The documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers. The question instead requires evidence for: Not all advanced switch features are available on shared tenant ports. The direct outcome to verify is: A two-tenant load test preserves the approved class treatment without leakage.

D:

The offered observation is: Each authorized switch obtains a distinct working management address and stays connected. It would support the separate mechanism: Switch discovery and controller communication require nonconflicting usable management addresses. In this case the decisive dependency is: Not all advanced switch features are available on shared tenant ports. The original keyed verification is: A two-tenant load test preserves the approved class treatment without leakage.

Question 500

At the Eastbrook infrastructure service operator, a provider wants tenant-specific egress queue behavior on a VDOM-shared FortiSwitch port without checking support. How should the organization sustain the improvement?

  1. Retest the shared-port feature matrix after version changes
  2. Review FortiLink interface assignment after firewall port migrations
  3. Review QoS model support for pooled tenant ports
  4. Verify peer group configuration after firmware upgrades

Explanation

Correct Answer

C:

The continuing safeguard is to review QoS model support for pooled tenant ports. It helps avoid the original condition: not all advanced switch features are available on shared tenant ports.

Incorrect Answers

A:

The suggested preventive check is: Retest the shared-port feature matrix after version changes. Its technical scope concerns: Multi-VDOM shared ports expose a defined subset of switch security capabilities. This question asks how to sustain control over: Not all advanced switch features are available on shared tenant ports. The more targeted safeguard is: Review QoS model support for pooled tenant ports.

B:

Review FortiLink interface assignment after firewall port migrations. That safeguard would help prevent recurrence of: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. The risk being reviewed here is instead: Not all advanced switch features are available on shared tenant ports. The matching ongoing control is: Review QoS model support for pooled tenant ports.

D:

Verify peer group configuration after firmware upgrades. That safeguard would help prevent recurrence of: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The risk being reviewed here is instead: Not all advanced switch features are available on shared tenant ports. The matching ongoing control is: Review QoS model support for pooled tenant ports.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests