McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 52

Question 510

At the Thornfield managed-network provider, a tenant design enables DHCP snooping directly on a FortiSwitch QinQ port and expects normal behavior. Which underlying issue most directly explains this situation?

  1. Multi-VDOM shared ports expose a defined subset of switch security capabilities
  2. Management-plane routing and access controls are separate from user data forwarding
  3. FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features
  4. Downstream management discovery depends on operational and permitted upstream switching paths

Explanation

Correct Answer

C:

The strongest explanation is that fortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. This accounts for the outcome and supports the action to move that inspection to a supported boundary because DHCP snooping is not supported with QinQ.

Incorrect Answers

A:

The offered principle is: Multi-VDOM shared ports expose a defined subset of switch security capabilities. In the source material it is associated with: Multi-VDOM shared ports expose a defined subset of switch security capabilities. This case has a different controlling cause: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. Its keyed mechanism is: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features.

B:

Management-plane routing and access controls are separate from user data forwarding. That is not the mechanism that accounts for the stated failure at the Thornfield managed-network provider.

D:

Although downstream management discovery depends on operational and permitted upstream switching paths, the presented symptoms do not support that as the primary cause; they indicate that fortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. For the Thornfield managed-network provider, the direct corrective action is to move that inspection to a supported boundary because DHCP snooping is not supported with QinQ.

Question 511

At the Thornfield managed-network provider, a tenant design enables DHCP snooping directly on a FortiSwitch QinQ port and expects normal behavior. What evidence would justify considering this concern addressed?

  1. The claimed port appears in the correct VDOM and is absent from competing tenants
  2. The new switch receives intended VLAN and port policies while the old unit is revoked
  3. Both connected units remain manageable and no duplicate traffic loop occurs
  4. A design test meets the tenant protection need without unsupported QinQ snooping

Explanation

Correct Answer

D:

This is the relevant acceptance result: a design test meets the tenant protection need without unsupported QinQ snooping. It demonstrates the outcome of choosing to move that inspection to a supported boundary because DHCP snooping is not supported with QinQ.

Incorrect Answers

A:

The claimed port appears in the correct VDOM and is absent from competing tenants. That result would test a control for this other failure: A port exported to a pool may need a tenant claim step before use. The question instead requires evidence for: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. The direct outcome to verify is: A design test meets the tenant protection need without unsupported QinQ snooping.

B:

The offered observation is: The new switch receives intended VLAN and port policies while the old unit is revoked. It would support the separate mechanism: Managed-switch configuration is associated with device identity and may not migrate automatically to a new serial. In this case the decisive dependency is: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. The original keyed verification is: A design test meets the tenant protection need without unsupported QinQ snooping.

C:

Both connected units remain manageable and no duplicate traffic loop occurs. That result would test a control for this other failure: Multiple bridged management uplinks can create loops without supported topology constraints. The question instead requires evidence for: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. The direct outcome to verify is: A design test meets the tenant protection need without unsupported QinQ snooping.

Question 512

At the Thornfield managed-network provider, a tenant design enables DHCP snooping directly on a FortiSwitch QinQ port and expects normal behavior. How should the organization sustain the improvement?

  1. Check documented QinQ feature exclusions before new tenant policies
  2. Run tenant isolation acceptance tests after shared-uplink changes
  3. Review L3 island route and LAG support during redundancy changes
  4. Review split interface behavior after changing aggregation

Explanation

Correct Answer

A:

The team should check documented QinQ feature exclusions before new tenant policies. That recurring practice targets the same weakness, namely that fortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features.

Incorrect Answers

B:

Run tenant isolation acceptance tests after shared-uplink changes. That safeguard would help prevent recurrence of: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. The risk being reviewed here is instead: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. The matching ongoing control is: Check documented QinQ feature exclusions before new tenant policies.

C:

That routine supports fortilink l3 multi-router lag, but the relevant ongoing risk requires the team to check documented QinQ feature exclusions before new tenant policies. For the Thornfield managed-network provider, the direct corrective action is to move that inspection to a supported boundary because DHCP snooping is not supported with QinQ.

D:

Review split interface behavior after changing aggregation. That safeguard would help prevent recurrence of: Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more. The risk being reviewed here is instead: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. The matching ongoing control is: Check documented QinQ feature exclusions before new tenant policies.

Question 513

At the Highbridge branch IT department, a provider configures only the outer service tag while omitting the required inner customer VLAN selection. Which approach best resolves the described issue?

  1. Use only supported per-port CoS egress queue policies and verify capability on the exact model
  2. Use the supported MCLAG peer-group topology and coordinated inter-chassis trunk
  3. Configure its supported management IP route and permitted administrative access services
  4. Map customer VLAN tags and service VLAN tags using supported QinQ controls

Explanation

Correct Answer

D:

Map customer VLAN tags and service VLAN tags using supported QinQ controls is the best response because an outer service VLAN alone cannot classify every intended tenant inner VLAN path. A focused validation would establish that two different customer inner tags retain correct service mapping across the trunk.

Incorrect Answers

A:

Use only supported per-port CoS egress queue policies and verify capability on the exact model can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to map customer VLAN tags and service VLAN tags using supported QinQ controls. For the Highbridge branch IT department, the direct corrective action is to map customer VLAN tags and service VLAN tags using supported QinQ controls.

B:

The offered action is: Use the supported MCLAG peer-group topology and coordinated inter-chassis trunk. It is associated with this separate technical condition: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The actual incident concerns a different dependency: An outer service VLAN alone cannot classify every intended tenant inner VLAN path. The corresponding change is: Map customer VLAN tags and service VLAN tags using supported QinQ controls.

C:

This alternative would be suitable where management-plane routing and access controls are separate from user data forwarding. It does not by itself resolve the need to map customer VLAN tags and service VLAN tags using supported QinQ controls. For the Highbridge branch IT department, the direct corrective action is to map customer VLAN tags and service VLAN tags using supported QinQ controls.

Question 514

At the Highbridge branch IT department, a provider configures only the outer service tag while omitting the required inner customer VLAN selection. Which explanation best accounts for the concern?

  1. A port exported to a pool may need a tenant claim step before use
  2. Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more
  3. An outer service VLAN alone cannot classify every intended tenant inner VLAN path
  4. The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports

Explanation

Correct Answer

C:

The situation shows that an outer service VLAN alone cannot classify every intended tenant inner VLAN path, rather than merely a monitoring or presentation issue. Remediation is to map customer VLAN tags and service VLAN tags using supported QinQ controls.

Incorrect Answers

A:

The offered principle is: A port exported to a pool may need a tenant claim step before use. In the source material it is associated with: A port exported to a pool may need a tenant claim step before use. This case has a different controlling cause: An outer service VLAN alone cannot classify every intended tenant inner VLAN path. Its keyed mechanism is: An outer service VLAN alone cannot classify every intended tenant inner VLAN path.

B:

Although split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more, the presented symptoms do not support that as the primary cause; they indicate that an outer service VLAN alone cannot classify every intended tenant inner VLAN path. For the Highbridge branch IT department, the direct corrective action is to map customer VLAN tags and service VLAN tags using supported QinQ controls.

D:

The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. That may occur elsewhere, but the evidence at the Highbridge branch IT department instead points to the fact that an outer service VLAN alone cannot classify every intended tenant inner VLAN path.

Question 515

At the Highbridge branch IT department, a provider configures only the outer service tag while omitting the required inner customer VLAN selection. Which test result best shows the requirement is met?

  1. The tenant retains permitted connectivity and no orphaned port allocation remains
  2. The setting persists after synchronization and a controlled switch restart
  3. Either peer can be disabled while the access test remains connected
  4. Two different customer inner tags retain correct service mapping across the trunk

Explanation

Correct Answer

D:

The team can confirm the fix by showing that two different customer inner tags retain correct service mapping across the trunk. This aligns with the corrective design to map customer VLAN tags and service VLAN tags using supported QinQ controls.

Incorrect Answers

A:

The tenant retains permitted connectivity and no orphaned port allocation remains. That result would test a control for this other failure: Changing VDOM ownership can leave obsolete VLAN references and inaccessible management objects. The question instead requires evidence for: An outer service VLAN alone cannot classify every intended tenant inner VLAN path. The direct outcome to verify is: Two different customer inner tags retain correct service mapping across the trunk.

B:

The offered observation is: The setting persists after synchronization and a controlled switch restart. It would support the separate mechanism: A FortiLink-managed FortiSwitch receives authoritative configuration from its FortiGate controller. In this case the decisive dependency is: An outer service VLAN alone cannot classify every intended tenant inner VLAN path. The original keyed verification is: Two different customer inner tags retain correct service mapping across the trunk.

C:

Either peer can be disabled while the access test remains connected. That result would test a control for this other failure: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The question instead requires evidence for: An outer service VLAN alone cannot classify every intended tenant inner VLAN path. The direct outcome to verify is: Two different customer inner tags retain correct service mapping across the trunk.

Question 516

At the Highbridge branch IT department, a provider configures only the outer service tag while omitting the required inner customer VLAN selection. Which ongoing control best prevents this issue from recurring?

  1. Review inner and outer tag maps during tenant expansion
  2. Audit pool requests and approved port allocations
  3. Synchronize switch port inventory after moves
  4. Include managed switching in FortiGate HA acceptance tests

Explanation

Correct Answer

A:

The continuing safeguard is to review inner and outer tag maps during tenant expansion. It helps avoid the original condition: an outer service VLAN alone cannot classify every intended tenant inner VLAN path.

Incorrect Answers

B:

Audit pool requests and approved port allocations. That safeguard would help prevent recurrence of: A port exported to a pool may need a tenant claim step before use. The risk being reviewed here is instead: An outer service VLAN alone cannot classify every intended tenant inner VLAN path. The matching ongoing control is: Review inner and outer tag maps during tenant expansion.

C:

Synchronize switch port inventory after moves is not the primary recurring safeguard for this problem. The team should review inner and outer tag maps during tenant expansion. For the Highbridge branch IT department, the direct corrective action is to map customer VLAN tags and service VLAN tags using supported QinQ controls.

D:

Include managed switching in FortiGate HA acceptance tests. That safeguard would help prevent recurrence of: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. The risk being reviewed here is instead: An outer service VLAN alone cannot classify every intended tenant inner VLAN path. The matching ongoing control is: Review inner and outer tag maps during tenant expansion.

Question 517

At the Zephyrhaven data network services firm, a tenant operator cannot see an unexported managed FortiSwitch in a nonroot VDOM and assumes the switch failed. Which implementation choice best addresses the situation?

  1. Verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch
  2. Revoke the port export and safely reassign it only after wiping tenant access policy
  3. Restrict supported administrative services to the approved management path and accounts
  4. Resize and validate the supported FortiLink management address pool or topology addressing plan

Explanation

Correct Answer

A:

This solution addresses the stated limitation: physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. Implementing it means the team should verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch, then verify that the root controller sees the physical unit and tenant sees only exported resources.

Incorrect Answers

B:

Revoke the port export and safely reassign it only after wiping tenant access policy addresses a different kind of problem: a stale VDOM port assignment leaves residual tenant access and operational ownership. Here the reported weakness is that physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. For the Zephyrhaven data network services firm, the direct corrective action is to verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch.

C:

The option addresses the separate situation where open management access from untrusted segments broadens credential attack surface. For this case, the more appropriate response is to verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch. For the Zephyrhaven data network services firm, the direct corrective action is to verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch.

D:

The offered alternative is: Resize and validate the supported FortiLink management address pool or topology addressing plan. It addresses this separate failure mode: Switch discovery and controller communication require nonconflicting usable management addresses. In the current case, the observed mechanism is: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. The keyed action, Verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch., targets that condition more directly.

Question 518

At the Zephyrhaven data network services firm, a tenant operator cannot see an unexported managed FortiSwitch in a nonroot VDOM and assumes the switch failed. What risk should the team identify as the primary issue?

  1. Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant
  2. Unbounded MAC learning can strain forwarding resources and cross-tenant expectations
  3. The documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers
  4. Two physical uplinks to independent peers are not a coordinated aggregate by default

Explanation

Correct Answer

A:

The situation shows that physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant, rather than merely a monitoring or presentation issue. Remediation is to verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch.

Incorrect Answers

B:

Unbounded MAC learning can strain forwarding resources and cross-tenant expectations. That may occur elsewhere, but the evidence at the Zephyrhaven data network services firm instead points to the fact that physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant.

C:

The offered alternative is: The documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers. It addresses this separate failure mode: The documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers. In the current case, the observed mechanism is: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. The keyed action, Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant., targets that condition more directly.

D:

Two physical uplinks to independent peers are not a coordinated aggregate by default. That is not the mechanism that accounts for the stated failure at the Zephyrhaven data network services firm.

Question 519

At the Zephyrhaven data network services firm, a tenant operator cannot see an unexported managed FortiSwitch in a nonroot VDOM and assumes the switch failed. What is the strongest acceptance test for this change?

  1. A two-tenant load test preserves the approved class treatment without leakage
  2. Each authorized switch obtains a distinct working management address and stays connected
  3. An authorized manager logs in over the approved path and guest access fails
  4. The root controller sees the physical unit and tenant sees only exported resources

Explanation

Correct Answer

D:

The intended correction is to verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch. The decisive verification is that the root controller sees the physical unit and tenant sees only exported resources, rather than only confirming configuration was saved.

Incorrect Answers

A:

A two-tenant load test preserves the approved class treatment without leakage. That result would test a control for this other failure: Not all advanced switch features are available on shared tenant ports. The question instead requires evidence for: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. The direct outcome to verify is: The root controller sees the physical unit and tenant sees only exported resources.

B:

At the Zephyrhaven data network services firm, a result about fortilink interface address pool would not show that the team corrected the failure where physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant.

C:

An authorized manager logs in over the approved path and guest access fails. That result would test a control for this other failure: Management-plane routing and access controls are separate from user data forwarding. The question instead requires evidence for: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. The direct outcome to verify is: The root controller sees the physical unit and tenant sees only exported resources.

Question 520

At the Zephyrhaven data network services firm, a tenant operator cannot see an unexported managed FortiSwitch in a nonroot VDOM and assumes the switch failed. Which setting or practice should be reviewed in future?

  1. Check documented QinQ feature exclusions before new tenant policies
  2. Maintain a tested FortiOS and FortiSwitchOS version matrix
  3. Document control-plane visibility versus tenant access boundaries
  4. Audit island controller binding after HA or site migrations

Explanation

Correct Answer

C:

The team should document control-plane visibility versus tenant access boundaries. That recurring practice targets the same weakness, namely that physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant.

Incorrect Answers

A:

Check documented QinQ feature exclusions before new tenant policies is not the primary recurring safeguard for this problem. The team should document control-plane visibility versus tenant access boundaries. For the Zephyrhaven data network services firm, the direct corrective action is to verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch.

B:

Maintain a tested FortiOS and FortiSwitchOS version matrix. That safeguard would help prevent recurrence of: Firmware version mismatches can break expected FortiLink and feature operation. The risk being reviewed here is instead: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. The matching ongoing control is: Document control-plane visibility versus tenant access boundaries.

D:

Audit island controller binding after HA or site migrations. That safeguard would help prevent recurrence of: Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. The risk being reviewed here is instead: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. The matching ongoing control is: Document control-plane visibility versus tenant access boundaries.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests