McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 53

Question 520

At the Zephyrhaven data network services firm, a tenant operator cannot see an unexported managed FortiSwitch in a nonroot VDOM and assumes the switch failed. Which setting or practice should be reviewed in future?

  1. Check documented QinQ feature exclusions before new tenant policies
  2. Maintain a tested FortiOS and FortiSwitchOS version matrix
  3. Document control-plane visibility versus tenant access boundaries
  4. Audit island controller binding after HA or site migrations

Explanation

Correct Answer

C:

The team should document control-plane visibility versus tenant access boundaries. That recurring practice targets the same weakness, namely that physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant.

Incorrect Answers

A:

Check documented QinQ feature exclusions before new tenant policies is not the primary recurring safeguard for this problem. The team should document control-plane visibility versus tenant access boundaries. For the Zephyrhaven data network services firm, the direct corrective action is to verify owning root VDOM controller scope and export the permitted resources rather than recreating the switch.

B:

Maintain a tested FortiOS and FortiSwitchOS version matrix. That safeguard would help prevent recurrence of: Firmware version mismatches can break expected FortiLink and feature operation. The risk being reviewed here is instead: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. The matching ongoing control is: Document control-plane visibility versus tenant access boundaries.

D:

Audit island controller binding after HA or site migrations. That safeguard would help prevent recurrence of: Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. The risk being reviewed here is instead: Physical managed FortiSwitch inventory may reside in the controlling VDOM rather than every tenant. The matching ongoing control is: Document control-plane visibility versus tenant access boundaries.

Question 521

At the Ivystone regional network integrator, two FortiGate VDOMs use separate FortiSwitch VLANs but administrators never test whether cross-tenant access is blocked. Which corrective action best meets the requirement?

  1. Revoke the port export and safely reassign it only after wiping tenant access policy
  2. Validate FortiGate VDOM policy and routing isolation for each tenant VLAN path
  3. Set the supported managed-switch port VLAN and voice policy in the FortiGate controller
  4. Adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements

Explanation

Correct Answer

B:

The primary failure mode is that separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. The proposed action directly fixes it by requiring the team to validate FortiGate VDOM policy and routing isolation for each tenant VLAN path; afterward, verify that a cross-tenant denied test fails while each tenant reaches its permitted gateway.

Incorrect Answers

A:

The option addresses the separate situation where a stale VDOM port assignment leaves residual tenant access and operational ownership. For this case, the more appropriate response is to validate FortiGate VDOM policy and routing isolation for each tenant VLAN path. For the Ivystone regional network integrator, the direct corrective action is to validate FortiGate VDOM policy and routing isolation for each tenant VLAN path.

C:

Set the supported managed-switch port VLAN and voice policy in the FortiGate controller can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to validate FortiGate VDOM policy and routing isolation for each tenant VLAN path. For the Ivystone regional network integrator, the direct corrective action is to validate FortiGate VDOM policy and routing isolation for each tenant VLAN path.

D:

The offered alternative is: Adjust supported controller-managed PoE budgets and physical power capacity from measured endpoint requirements. It addresses this separate failure mode: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. In the current case, the observed mechanism is: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. The keyed action, Validate FortiGate VDOM policy and routing isolation for each tenant VLAN path., targets that condition more directly.

Question 522

At the Ivystone regional network integrator, two FortiGate VDOMs use separate FortiSwitch VLANs but administrators never test whether cross-tenant access is blocked. Which underlying issue most directly explains this situation?

  1. Virtual tenant separation does not create independent physical power supplies
  2. Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation
  3. Missing port identity makes correct endpoint provisioning and incident isolation harder
  4. A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery

Explanation

Correct Answer

B:

The architectural weakness is that separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. It can be addressed through the controlled change to validate FortiGate VDOM policy and routing isolation for each tenant VLAN path.

Incorrect Answers

A:

The offered principle is: Virtual tenant separation does not create independent physical power supplies. In the source material it is associated with: Virtual tenant separation does not create independent physical power supplies. This case has a different controlling cause: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. Its keyed mechanism is: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation.

C:

The offered principle is: Missing port identity makes correct endpoint provisioning and incident isolation harder. In the source material it is associated with: Missing port identity makes correct endpoint provisioning and incident isolation harder. This case has a different controlling cause: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. Its keyed mechanism is: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation.

D:

Although a normal LAN interface does not automatically provide the control plane expected by FortiLink discovery, the presented symptoms do not support that as the primary cause; they indicate that separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. For the Ivystone regional network integrator, the direct corrective action is to validate FortiGate VDOM policy and routing isolation for each tenant VLAN path.

Question 523

At the Ivystone regional network integrator, two FortiGate VDOMs use separate FortiSwitch VLANs but administrators never test whether cross-tenant access is blocked. What evidence would justify considering this concern addressed?

  1. The provider receives the expected double-tagged frame and returns traffic correctly
  2. A cross-tenant denied test fails while each tenant reaches its permitted gateway
  3. The intended downstream serial appears after the upstream connection is correctly provisioned
  4. The FortiGate discovers and manages the connected FortiSwitch using its FortiLink interface

Explanation

Correct Answer

B:

The intended correction is to validate FortiGate VDOM policy and routing isolation for each tenant VLAN path. The decisive verification is that a cross-tenant denied test fails while each tenant reaches its permitted gateway, rather than only confirming configuration was saved.

Incorrect Answers

A:

The provider receives the expected double-tagged frame and returns traffic correctly. That result would test a control for this other failure: An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. The question instead requires evidence for: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. The direct outcome to verify is: A cross-tenant denied test fails while each tenant reaches its permitted gateway.

C:

The intended downstream serial appears after the upstream connection is correctly provisioned. That result would test a control for this other failure: Downstream management discovery depends on operational and permitted upstream switching paths. The question instead requires evidence for: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. The direct outcome to verify is: A cross-tenant denied test fails while each tenant reaches its permitted gateway.

D:

The offered observation is: The FortiGate discovers and manages the connected FortiSwitch using its FortiLink interface. It would support the separate mechanism: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. In this case the decisive dependency is: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. The original keyed verification is: A cross-tenant denied test fails while each tenant reaches its permitted gateway.

Question 524

At the Ivystone regional network integrator, two FortiGate VDOMs use separate FortiSwitch VLANs but administrators never test whether cross-tenant access is blocked. How should the organization sustain the improvement?

  1. Audit pool requests and approved port allocations
  2. Run tenant isolation acceptance tests after shared-uplink changes
  3. Synchronize switch port inventory after moves
  4. Update serial inventory after every device RMA

Explanation

Correct Answer

B:

For the Ivystone regional network integrator, this maintenance action preserves the fix: run tenant isolation acceptance tests after shared-uplink changes. It should be revisited as the workload evolves.

Incorrect Answers

A:

The suggested preventive check is: Audit pool requests and approved port allocations. Its technical scope concerns: A port exported to a pool may need a tenant claim step before use. This question asks how to sustain control over: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. The more targeted safeguard is: Run tenant isolation acceptance tests after shared-uplink changes.

C:

That routine supports fortiswitch port inventory labels, but the relevant ongoing risk requires the team to run tenant isolation acceptance tests after shared-uplink changes. For the Ivystone regional network integrator, the direct corrective action is to validate FortiGate VDOM policy and routing isolation for each tenant VLAN path.

D:

Update serial inventory after every device RMA. That safeguard would help prevent recurrence of: Managed-switch configuration is associated with device identity and may not migrate automatically to a new serial. The risk being reviewed here is instead: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. The matching ongoing control is: Run tenant isolation acceptance tests after shared-uplink changes.

Question 525

At the Valeford multisite IT support team, a tenant contract ends but its formerly assigned physical FortiSwitch port remains exported to that VDOM. Which approach best resolves the described issue?

  1. Have the tenant request the approved port from the supported FortiSwitch virtual port pool
  2. Revoke the port export and safely reassign it only after wiping tenant access policy
  3. Use manual serial verification and authorization for switches where onboarding policy requires explicit approval
  4. Wire and configure an HA-compatible FortiLink topology with matching active-controller access

Explanation

Correct Answer

B:

For the Valeford multisite IT support team, the appropriate correction is to revoke the port export and safely reassign it only after wiping tenant access policy. The decisive reason is that a stale VDOM port assignment leaves residual tenant access and operational ownership; acceptance evidence is that the retired tenant cannot access the port and the replacement tenant gets a clean configuration.

Incorrect Answers

A:

Have the tenant request the approved port from the supported FortiSwitch virtual port pool can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to revoke the port export and safely reassign it only after wiping tenant access policy. For the Valeford multisite IT support team, the direct corrective action is to revoke the port export and safely reassign it only after wiping tenant access policy.

C:

This alternative would be suitable where unreviewed automatic authorization can admit a connected switch before identity and installation are checked. It does not by itself resolve the need to revoke the port export and safely reassign it only after wiping tenant access policy. For the Valeford multisite IT support team, the direct corrective action is to revoke the port export and safely reassign it only after wiping tenant access policy.

D:

Wire and configure an HA-compatible FortiLink topology with matching active-controller access addresses a different kind of problem: failing over the firewall does not help if the promoted member lacks an operational FortiLink path. Here the reported weakness is that a stale VDOM port assignment leaves residual tenant access and operational ownership. For the Valeford multisite IT support team, the direct corrective action is to revoke the port export and safely reassign it only after wiping tenant access policy.

Question 526

At the Valeford multisite IT support team, a tenant contract ends but its formerly assigned physical FortiSwitch port remains exported to that VDOM. Which explanation best accounts for the concern?

  1. Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements
  2. Unsaved changes in active configuration can disappear during restart
  3. Second-tier management depends on the operational first-tier inter-switch path
  4. A stale VDOM port assignment leaves residual tenant access and operational ownership

Explanation

Correct Answer

D:

This identifies the root issue: a stale VDOM port assignment leaves residual tenant access and operational ownership. At the Valeford multisite IT support team, the team should therefore revoke the port export and safely reassign it only after wiping tenant access policy.

Incorrect Answers

A:

The offered principle is: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. In the source material it is associated with: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. This case has a different controlling cause: A stale VDOM port assignment leaves residual tenant access and operational ownership. Its keyed mechanism is: A stale VDOM port assignment leaves residual tenant access and operational ownership.

B:

Although unsaved changes in active configuration can disappear during restart, the presented symptoms do not support that as the primary cause; they indicate that a stale VDOM port assignment leaves residual tenant access and operational ownership. For the Valeford multisite IT support team, the direct corrective action is to revoke the port export and safely reassign it only after wiping tenant access policy.

C:

The offered principle is: Second-tier management depends on the operational first-tier inter-switch path. In the source material it is associated with: Second-tier management depends on the operational first-tier inter-switch path. This case has a different controlling cause: A stale VDOM port assignment leaves residual tenant access and operational ownership. Its keyed mechanism is: A stale VDOM port assignment leaves residual tenant access and operational ownership.

Question 527

At the Valeford multisite IT support team, a tenant contract ends but its formerly assigned physical FortiSwitch port remains exported to that VDOM. Which test result best shows the requirement is met?

  1. Two different customer inner tags retain correct service mapping across the trunk
  2. The retired tenant cannot access the port and the replacement tenant gets a clean configuration
  3. The island discovers its FortiGate over a correctly routed unNATed path
  4. A test phone reaches its permitted voice subnet after policy synchronization

Explanation

Correct Answer

B:

This is the relevant acceptance result: the retired tenant cannot access the port and the replacement tenant gets a clean configuration. It demonstrates the outcome of choosing to revoke the port export and safely reassign it only after wiping tenant access policy.

Incorrect Answers

A:

Two different customer inner tags retain correct service mapping across the trunk. That result would test a control for this other failure: An outer service VLAN alone cannot classify every intended tenant inner VLAN path. The question instead requires evidence for: A stale VDOM port assignment leaves residual tenant access and operational ownership. The direct outcome to verify is: The retired tenant cannot access the port and the replacement tenant gets a clean configuration.

C:

The island discovers its FortiGate over a correctly routed unNATed path. That result would test a control for this other failure: NAT between FortiSwitch and FortiGate is not supported for FortiLink Layer 3 management. The question instead requires evidence for: A stale VDOM port assignment leaves residual tenant access and operational ownership. The direct outcome to verify is: The retired tenant cannot access the port and the replacement tenant gets a clean configuration.

D:

At the Valeford multisite IT support team, a result about fortiswitch managed port vlan would not show that the team corrected the failure where a stale VDOM port assignment leaves residual tenant access and operational ownership.

Question 528

At the Valeford multisite IT support team, a tenant contract ends but its formerly assigned physical FortiSwitch port remains exported to that VDOM. Which ongoing control best prevents this issue from recurring?

  1. Review QoS model support for pooled tenant ports
  2. Review L3 FortiLink limitations before adding islands
  3. Reconcile port export records during offboarding
  4. Review hardware-switch STP requirements during expansions

Explanation

Correct Answer

C:

After implementation, the team should reconcile port export records during offboarding as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

A:

That routine supports tenant per-port qos constraints, but the relevant ongoing risk requires the team to reconcile port export records during offboarding. For the Valeford multisite IT support team, the direct corrective action is to revoke the port export and safely reassign it only after wiping tenant access policy.

B:

Review L3 FortiLink limitations before adding islands. That safeguard would help prevent recurrence of: FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path. The risk being reviewed here is instead: A stale VDOM port assignment leaves residual tenant access and operational ownership. The matching ongoing control is: Reconcile port export records during offboarding.

D:

Review hardware-switch STP requirements during expansions. That safeguard would help prevent recurrence of: Multiple bridged management uplinks can create loops without supported topology constraints. The risk being reviewed here is instead: A stale VDOM port assignment leaves residual tenant access and operational ownership. The matching ongoing control is: Reconcile port export records during offboarding.

Question 529

At the Lakehaven campus infrastructure group, a provider assumes every FortiSwitch feature can be applied uniformly to a VDOM-shared port. Which implementation choice best addresses the situation?

  1. Have the tenant request the approved port from the supported FortiSwitch virtual port pool
  2. Apply only supported port-security policies and document unsupported controls for the selected model
  3. Use the supported MCLAG peer-group topology and coordinated inter-chassis trunk
  4. Check whether the split interface is enabled and confirm the expected one-active-link topology

Explanation

Correct Answer

B:

Apply only supported port-security policies and document unsupported controls for the selected model is the best response because multi-VDOM shared ports expose a defined subset of switch security capabilities. A focused validation would establish that a test tenant authentication policy works without enabling unsupported port features.

Incorrect Answers

A:

This alternative would be suitable where a port exported to a pool may need a tenant claim step before use. It does not by itself resolve the need to apply only supported port-security policies and document unsupported controls for the selected model. For the Lakehaven campus infrastructure group, the direct corrective action is to apply only supported port-security policies and document unsupported controls for the selected model.

C:

The option addresses the separate situation where multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. For this case, the more appropriate response is to apply only supported port-security policies and document unsupported controls for the selected model. For the Lakehaven campus infrastructure group, the direct corrective action is to apply only supported port-security policies and document unsupported controls for the selected model.

D:

The offered alternative is: Check whether the split interface is enabled and confirm the expected one-active-link topology. It addresses this separate failure mode: Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more. In the current case, the observed mechanism is: Multi-VDOM shared ports expose a defined subset of switch security capabilities. The keyed action, Apply only supported port-security policies and document unsupported controls for the selected model., targets that condition more directly.

Question 530

At the Lakehaven campus infrastructure group, a provider assumes every FortiSwitch feature can be applied uniformly to a VDOM-shared port. What risk should the team identify as the primary issue?

  1. A port exported to a pool may need a tenant claim step before use
  2. Multi-VDOM shared ports expose a defined subset of switch security capabilities
  3. A simple managed site can be operated without unnecessary high-availability interconnections
  4. FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path

Explanation

Correct Answer

B:

This identifies the root issue: multi-VDOM shared ports expose a defined subset of switch security capabilities. At the Lakehaven campus infrastructure group, the team should therefore apply only supported port-security policies and document unsupported controls for the selected model.

Incorrect Answers

A:

The offered action is: A port exported to a pool may need a tenant claim step before use. It is associated with this separate technical condition: A port exported to a pool may need a tenant claim step before use. The actual incident concerns a different dependency: Multi-VDOM shared ports expose a defined subset of switch security capabilities. The corresponding change is: Multi-VDOM shared ports expose a defined subset of switch security capabilities.

C:

The offered alternative is: A simple managed site can be operated without unnecessary high-availability interconnections. It addresses this separate failure mode: A simple managed site can be operated without unnecessary high-availability interconnections. In the current case, the observed mechanism is: Multi-VDOM shared ports expose a defined subset of switch security capabilities. The keyed action, Multi-VDOM shared ports expose a defined subset of switch security capabilities., targets that condition more directly.

D:

FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path. That is not the mechanism that accounts for the stated failure at the Lakehaven campus infrastructure group.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests