McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 51

Question 500

At the Eastbrook infrastructure service operator, a provider wants tenant-specific egress queue behavior on a VDOM-shared FortiSwitch port without checking support. How should the organization sustain the improvement?

  1. Retest the shared-port feature matrix after version changes
  2. Review FortiLink interface assignment after firewall port migrations
  3. Review QoS model support for pooled tenant ports
  4. Verify peer group configuration after firmware upgrades

Explanation

Correct Answer

C:

The continuing safeguard is to review QoS model support for pooled tenant ports. It helps avoid the original condition: not all advanced switch features are available on shared tenant ports.

Incorrect Answers

A:

The suggested preventive check is: Retest the shared-port feature matrix after version changes. Its technical scope concerns: Multi-VDOM shared ports expose a defined subset of switch security capabilities. This question asks how to sustain control over: Not all advanced switch features are available on shared tenant ports. The more targeted safeguard is: Review QoS model support for pooled tenant ports.

B:

Review FortiLink interface assignment after firewall port migrations. That safeguard would help prevent recurrence of: A normal LAN interface does not automatically provide the control plane expected by FortiLink discovery. The risk being reviewed here is instead: Not all advanced switch features are available on shared tenant ports. The matching ongoing control is: Review QoS model support for pooled tenant ports.

D:

Verify peer group configuration after firmware upgrades. That safeguard would help prevent recurrence of: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The risk being reviewed here is instead: Not all advanced switch features are available on shared tenant ports. The matching ongoing control is: Review QoS model support for pooled tenant ports.

Question 501

At the Tarnbridge campus infrastructure group, a managed service provider needs overlapping customer VLAN identifiers on one physical trunk and accidentally reuses one outer service VLAN for different customers. Which approach best resolves the described issue?

  1. Recreate or reassign supported tenant VLAN interfaces and switch-port ownership under a controlled migration
  2. Check whether the split interface is enabled and confirm the expected one-active-link topology
  3. Test and document supported FortiLink path failover and controller reachability end to end
  4. Assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace

Explanation

Correct Answer

D:

Assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace is the best response because overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. A focused validation would establish that two tenants carry the same inner VLAN ID without exchanging frames.

Incorrect Answers

A:

Recreate or reassign supported tenant VLAN interfaces and switch-port ownership under a controlled migration can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace. For the Tarnbridge campus infrastructure group, the direct corrective action is to assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace.

B:

The offered action is: Check whether the split interface is enabled and confirm the expected one-active-link topology. It is associated with this separate technical condition: Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more. The actual incident concerns a different dependency: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. The corresponding change is: Assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace.

C:

This alternative would be suitable where a configured backup interface does not prove switch management survives an upstream path outage. It does not by itself resolve the need to assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace. For the Tarnbridge campus infrastructure group, the direct corrective action is to assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace.

Question 502

At the Tarnbridge campus infrastructure group, a managed service provider needs overlapping customer VLAN identifiers on one physical trunk and accidentally reuses one outer service VLAN for different customers. Which explanation best accounts for the concern?

  1. Virtual tenant separation does not create independent physical power supplies
  2. Unreviewed automatic authorization can admit a connected switch before identity and installation are checked
  3. Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure
  4. Unsaved changes in active configuration can disappear during restart

Explanation

Correct Answer

C:

The situation shows that overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure, rather than merely a monitoring or presentation issue. Remediation is to assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace.

Incorrect Answers

A:

The offered principle is: Virtual tenant separation does not create independent physical power supplies. In the source material it is associated with: Virtual tenant separation does not create independent physical power supplies. This case has a different controlling cause: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. Its keyed mechanism is: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure.

B:

Although unreviewed automatic authorization can admit a connected switch before identity and installation are checked, the presented symptoms do not support that as the primary cause; they indicate that overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. For the Tarnbridge campus infrastructure group, the direct corrective action is to assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace.

D:

Unsaved changes in active configuration can disappear during restart. That may occur elsewhere, but the evidence at the Tarnbridge campus infrastructure group instead points to the fact that overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure.

Question 503

At the Tarnbridge campus infrastructure group, a managed service provider needs overlapping customer VLAN identifiers on one physical trunk and accidentally reuses one outer service VLAN for different customers. Which test result best shows the requirement is met?

  1. Both tenants' critical endpoints remain powered in the approved full-load test
  2. An authorized manager logs in over the approved path and guest access fails
  3. Two tenants carry the same inner VLAN ID without exchanging frames
  4. The intended downstream serial appears after the upstream connection is correctly provisioned

Explanation

Correct Answer

C:

Because overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure, the required evidence must show that two tenants carry the same inner VLAN ID without exchanging frames. A healthy endpoint status alone is insufficient.

Incorrect Answers

A:

Both tenants' critical endpoints remain powered in the approved full-load test. That result would test a control for this other failure: Virtual tenant separation does not create independent physical power supplies. The question instead requires evidence for: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. The direct outcome to verify is: Two tenants carry the same inner VLAN ID without exchanging frames.

B:

The offered observation is: An authorized manager logs in over the approved path and guest access fails. It would support the separate mechanism: Management-plane routing and access controls are separate from user data forwarding. In this case the decisive dependency is: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. The original keyed verification is: Two tenants carry the same inner VLAN ID without exchanging frames.

D:

At the Tarnbridge campus infrastructure group, a result about fortiswitch topology authorization order would not show that the team corrected the failure where overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure.

Question 504

At the Tarnbridge campus infrastructure group, a managed service provider needs overlapping customer VLAN identifiers on one physical trunk and accidentally reuses one outer service VLAN for different customers. Which ongoing control best prevents this issue from recurring?

  1. Review feature compatibility before exporting security-sensitive ports
  2. Review port policy assignments during telephony moves
  3. Verify transparent bridge and FortiLink compatibility on replacement
  4. Audit service and customer tag assignments during onboarding

Explanation

Correct Answer

D:

This control works beyond the initial remediation because it requires the team to audit service and customer tag assignments during onboarding.

Incorrect Answers

A:

That routine supports shared port dhcp snooping caveat, but the relevant ongoing risk requires the team to audit service and customer tag assignments during onboarding. For the Tarnbridge campus infrastructure group, the direct corrective action is to assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace.

B:

Review port policy assignments during telephony moves. That safeguard would help prevent recurrence of: A managed FortiSwitch port follows its controller configuration even when the connected phone appears physically healthy. The risk being reviewed here is instead: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. The matching ongoing control is: Audit service and customer tag assignments during onboarding.

C:

Verify transparent bridge and FortiLink compatibility on replacement is not the primary recurring safeguard for this problem. The team should audit service and customer tag assignments during onboarding. For the Tarnbridge campus infrastructure group, the direct corrective action is to assign distinct approved service VLAN tags while preserving each tenant's customer VLAN namespace.

Question 505

At the Glenbrook network security team, a carrier expects a nondefault outer tag EtherType but the FortiSwitch handoff uses a different TPID. Which implementation choice best addresses the situation?

  1. Export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership
  2. Use supported FortiLink point-to-point Layer 2 bridging and appropriate discovery handling
  3. Select a supported VLAN TPID profile consistently across the provider handoff
  4. Move to a supported ring or redundant FortiLink topology with verified control-plane continuity

Explanation

Correct Answer

C:

This is the direct FortiSwitch 7.6 administration remedy: select a supported VLAN TPID profile consistently across the provider handoff. The observed risk is that an outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary; a passing acceptance check would show that the provider receives the expected double-tagged frame and returns traffic correctly.

Incorrect Answers

A:

This alternative would be suitable where managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. It does not by itself resolve the need to select a supported VLAN TPID profile consistently across the provider handoff. For the Glenbrook network security team, the direct corrective action is to select a supported VLAN TPID profile consistently across the provider handoff.

B:

Use supported FortiLink point-to-point Layer 2 bridging and appropriate discovery handling addresses a different kind of problem: some intermediate Layer 2 devices do not transport standard neighbor discovery frames. Here the reported weakness is that an outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. For the Glenbrook network security team, the direct corrective action is to select a supported VLAN TPID profile consistently across the provider handoff.

D:

The offered alternative is: Move to a supported ring or redundant FortiLink topology with verified control-plane continuity. It addresses this separate failure mode: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. In the current case, the observed mechanism is: An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. The keyed action, Select a supported VLAN TPID profile consistently across the provider handoff., targets that condition more directly.

Question 506

At the Glenbrook network security team, a carrier expects a nondefault outer tag EtherType but the FortiSwitch handoff uses a different TPID. What risk should the team identify as the primary issue?

  1. Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation
  2. An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary
  3. Failing over the firewall does not help if the promoted member lacks an operational FortiLink path
  4. The documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers

Explanation

Correct Answer

B:

This identifies the root issue: an outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. At the Glenbrook network security team, the team should therefore select a supported VLAN TPID profile consistently across the provider handoff.

Incorrect Answers

A:

The offered action is: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. It is associated with this separate technical condition: Separate VLAN labels do not independently guarantee tenant Layer 3 policy isolation. The actual incident concerns a different dependency: An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. The corresponding change is: An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary.

C:

The offered alternative is: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. It addresses this separate failure mode: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. In the current case, the observed mechanism is: An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. The keyed action, An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary., targets that condition more directly.

D:

The documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers. That is not the mechanism that accounts for the stated failure at the Glenbrook network security team.

Question 507

At the Glenbrook network security team, a carrier expects a nondefault outer tag EtherType but the FortiSwitch handoff uses a different TPID. What is the strongest acceptance test for this change?

  1. The provider receives the expected double-tagged frame and returns traffic correctly
  2. Two tenants carry the same inner VLAN ID without exchanging frames
  3. The new switch receives intended VLAN and port policies while the old unit is revoked
  4. All prioritized access points remain powered during a simulated full load

Explanation

Correct Answer

A:

Because an outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary, the required evidence must show that the provider receives the expected double-tagged frame and returns traffic correctly. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Glenbrook network security team, a result about vdom qinq outer vlan would not show that the team corrected the failure where an outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary.

C:

The new switch receives intended VLAN and port policies while the old unit is revoked. That result would test a control for this other failure: Managed-switch configuration is associated with device identity and may not migrate automatically to a new serial. The question instead requires evidence for: An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. The direct outcome to verify is: The provider receives the expected double-tagged frame and returns traffic correctly.

D:

The offered observation is: All prioritized access points remain powered during a simulated full load. It would support the separate mechanism: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. In this case the decisive dependency is: An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. The original keyed verification is: The provider receives the expected double-tagged frame and returns traffic correctly.

Question 508

At the Glenbrook network security team, a carrier expects a nondefault outer tag EtherType but the FortiSwitch handoff uses a different TPID. Which setting or practice should be reviewed in future?

  1. Review PoE consumption and tenant reservations monthly
  2. Revalidate TPID configuration whenever carrier handoffs change
  3. Include managed switching in FortiGate HA acceptance tests
  4. Verify peer group configuration after firmware upgrades

Explanation

Correct Answer

B:

This control works beyond the initial remediation because it requires the team to revalidate TPID configuration whenever carrier handoffs change.

Incorrect Answers

A:

Review PoE consumption and tenant reservations monthly is not the primary recurring safeguard for this problem. The team should revalidate TPID configuration whenever carrier handoffs change. For the Glenbrook network security team, the direct corrective action is to select a supported VLAN TPID profile consistently across the provider handoff.

C:

The suggested preventive check is: Include managed switching in FortiGate HA acceptance tests. Its technical scope concerns: Failing over the firewall does not help if the promoted member lacks an operational FortiLink path. This question asks how to sustain control over: An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. The more targeted safeguard is: Revalidate TPID configuration whenever carrier handoffs change.

D:

Verify peer group configuration after firmware upgrades. That safeguard would help prevent recurrence of: Multi-chassis redundancy requires peers to exchange supported state over their inter-chassis connection. The risk being reviewed here is instead: An outer-tag EtherType mismatch can make customer VLAN frames unreadable across the service boundary. The matching ongoing control is: Revalidate TPID configuration whenever carrier handoffs change.

Question 509

At the Thornfield managed-network provider, a tenant design enables DHCP snooping directly on a FortiSwitch QinQ port and expects normal behavior. Which corrective action best meets the requirement?

  1. Apply a supported learning limit on eligible shared FortiSwitch ports and plan valid capacity
  2. Use supported FortiLink point-to-point Layer 2 bridging and appropriate discovery handling
  3. Validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller
  4. Move that inspection to a supported boundary because DHCP snooping is not supported with QinQ

Explanation

Correct Answer

D:

For the Thornfield managed-network provider, the appropriate correction is to move that inspection to a supported boundary because DHCP snooping is not supported with QinQ. The decisive reason is that fortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features; acceptance evidence is that a design test meets the tenant protection need without unsupported QinQ snooping.

Incorrect Answers

A:

The option addresses the separate situation where unbounded MAC learning can strain forwarding resources and cross-tenant expectations. For this case, the more appropriate response is to move that inspection to a supported boundary because DHCP snooping is not supported with QinQ. For the Thornfield managed-network provider, the direct corrective action is to move that inspection to a supported boundary because DHCP snooping is not supported with QinQ.

B:

The offered action is: Use supported FortiLink point-to-point Layer 2 bridging and appropriate discovery handling. It is associated with this separate technical condition: Some intermediate Layer 2 devices do not transport standard neighbor discovery frames. The actual incident concerns a different dependency: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. The corresponding change is: Move that inspection to a supported boundary because DHCP snooping is not supported with QinQ.

C:

Validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to move that inspection to a supported boundary because DHCP snooping is not supported with QinQ. For the Thornfield managed-network provider, the direct corrective action is to move that inspection to a supported boundary because DHCP snooping is not supported with QinQ.

Question 510

At the Thornfield managed-network provider, a tenant design enables DHCP snooping directly on a FortiSwitch QinQ port and expects normal behavior. Which underlying issue most directly explains this situation?

  1. Multi-VDOM shared ports expose a defined subset of switch security capabilities
  2. Management-plane routing and access controls are separate from user data forwarding
  3. FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features
  4. Downstream management discovery depends on operational and permitted upstream switching paths

Explanation

Correct Answer

C:

The strongest explanation is that fortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. This accounts for the outcome and supports the action to move that inspection to a supported boundary because DHCP snooping is not supported with QinQ.

Incorrect Answers

A:

The offered principle is: Multi-VDOM shared ports expose a defined subset of switch security capabilities. In the source material it is associated with: Multi-VDOM shared ports expose a defined subset of switch security capabilities. This case has a different controlling cause: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. Its keyed mechanism is: FortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features.

B:

Management-plane routing and access controls are separate from user data forwarding. That is not the mechanism that accounts for the stated failure at the Thornfield managed-network provider.

D:

Although downstream management discovery depends on operational and permitted upstream switching paths, the presented symptoms do not support that as the primary cause; they indicate that fortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. For the Thornfield managed-network provider, the direct corrective action is to move that inspection to a supported boundary because DHCP snooping is not supported with QinQ.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests