McAfee Secure

Exam Code: NSE5_FSW_AD-7.6

Exam Name: Fortinet NSE 5 - FortiSwitch 7.6 Administrator

Certification Provider: Fortinet

Corresponding Certification: NSE5

Fortinet NSE5_FSW_AD-7.6 Questions & Answers

Study with Up-To-Date REAL Exam Questions and Answers from the ACTUAL Test

64 Questions & Answers with Testing Engine

"Fortinet NSE 5 - FortiSwitch 7.6 Administrator Exam", also known as NSE5_FSW_AD-7.6 exam, is a Fortinet certification exam.

Pass your tests with the always up-to-date NSE5_FSW_AD-7.6 Exam Engine. Your NSE5_FSW_AD-7.6 training materials keep you at the head of the pack!

Satisfaction Guaranteed

Money Back Guarantee

Testking provides hassle-free money back guarantee with our products. That is because we have 100% trust in the abilities of our professional and experience product team, and our record is a proof of that.

99.6% PASS RATE
Was: $137.49
Now: $124.99

Fortinet NSE5_FSW_AD-7.6 Practice Test 48

Question 470

At the Orchardfield infrastructure service operator, two customer tenants share one managed switch but the administrator assigns all ports only in the root FortiGate VDOM. What risk should the team identify as the primary issue?

  1. Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure
  2. The documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers
  3. Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name
  4. Management-plane routing and access controls are separate from user data forwarding

Explanation

Correct Answer

C:

The evidence indicates that managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. The appropriate response is to export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership and demonstrate that each tenant administrator sees and configures only ports assigned to its VDOM.

Incorrect Answers

A:

The offered action is: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. It is associated with this separate technical condition: Overlapping customer VLAN IDs require a segregating outer service tag across shared infrastructure. The actual incident concerns a different dependency: Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. The corresponding change is: Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name.

B:

The documented Layer 3 FortiLink in-band LAG cannot span separate intermediary routers. That may occur elsewhere, but the evidence at the Orchardfield infrastructure service operator instead points to the fact that managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name.

D:

Management-plane routing and access controls are separate from user data forwarding. That is not the mechanism that accounts for the stated failure at the Orchardfield infrastructure service operator.

Question 471

At the Orchardfield infrastructure service operator, two customer tenants share one managed switch but the administrator assigns all ports only in the root FortiGate VDOM. What is the strongest acceptance test for this change?

  1. Each tenant administrator sees and configures only ports assigned to its VDOM
  2. A lab review shows enforcement without assuming unsupported snooping on that shared port
  3. All prioritized access points remain powered during a simulated full load
  4. The island remains managed while an L2 broadcast remains local to its site

Explanation

Correct Answer

A:

Because managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name, the required evidence must show that each tenant administrator sees and configures only ports assigned to its VDOM. A healthy endpoint status alone is insufficient.

Incorrect Answers

B:

At the Orchardfield infrastructure service operator, a result about shared port dhcp snooping caveat would not show that the team corrected the failure where managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name.

C:

All prioritized access points remain powered during a simulated full load. That result would test a control for this other failure: The shared switch power limit can be exceeded even when the switch has enough physical Ethernet ports. The question instead requires evidence for: Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. The direct outcome to verify is: Each tenant administrator sees and configures only ports assigned to its VDOM.

D:

The offered observation is: The island remains managed while an L2 broadcast remains local to its site. It would support the separate mechanism: FortiLink over Layer 3 does not create a continuous Layer 2 VLAN across the routed path. In this case the decisive dependency is: Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. The original keyed verification is: Each tenant administrator sees and configures only ports assigned to its VDOM.

Question 472

At the Orchardfield infrastructure service operator, two customer tenants share one managed switch but the administrator assigns all ports only in the root FortiGate VDOM. Which setting or practice should be reviewed in future?

  1. Run tenant isolation acceptance tests after shared-uplink changes
  2. Test redundant FortiLink transport at each site review
  3. Validate port-specific topology constraints before branch construction
  4. Reconcile switch-port VDOM ownership after tenant moves

Explanation

Correct Answer

D:

For the Orchardfield infrastructure service operator, this maintenance action preserves the fix: reconcile switch-port VDOM ownership after tenant moves. It should be revisited as the workload evolves.

Incorrect Answers

A:

Run tenant isolation acceptance tests after shared-uplink changes is not the primary recurring safeguard for this problem. The team should reconcile switch-port VDOM ownership after tenant moves. For the Orchardfield infrastructure service operator, the direct corrective action is to export supported FortiSwitch ports to the correct tenant VDOM with explicit ownership.

B:

Test redundant FortiLink transport at each site review. That safeguard would help prevent recurrence of: A configured backup interface does not prove switch management survives an upstream path outage. The risk being reviewed here is instead: Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. The matching ongoing control is: Reconcile switch-port VDOM ownership after tenant moves.

C:

The suggested preventive check is: Validate port-specific topology constraints before branch construction. Its technical scope concerns: The documented out-of-band mgmt-port Layer 3 mode supports a single FortiSwitch island member. This question asks how to sustain control over: Managed FortiSwitch physical port administration does not automatically follow a tenant VLAN name. The more targeted safeguard is: Reconcile switch-port VDOM ownership after tenant moves.

Question 473

At the Alderbridge enterprise network team, a provider offers unused switch ports through a virtual port pool but the tenant expects them to be assigned immediately. Which corrective action best meets the requirement?

  1. Move that inspection to a supported boundary because DHCP snooping is not supported with QinQ
  2. Have the tenant request the approved port from the supported FortiSwitch virtual port pool
  3. Validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller
  4. Move to a supported ring or redundant FortiLink topology with verified control-plane continuity

Explanation

Correct Answer

B:

The primary failure mode is that a port exported to a pool may need a tenant claim step before use. The proposed action directly fixes it by requiring the team to have the tenant request the approved port from the supported FortiSwitch virtual port pool; afterward, verify that the claimed port appears in the correct VDOM and is absent from competing tenants.

Incorrect Answers

A:

The option addresses the separate situation where fortiSwitch QinQ mode has documented restrictions on several Layer 2 inspection features. For this case, the more appropriate response is to have the tenant request the approved port from the supported FortiSwitch virtual port pool. For the Alderbridge enterprise network team, the direct corrective action is to have the tenant request the approved port from the supported FortiSwitch virtual port pool.

C:

Validate the Fortinet compatibility guidance and stage supported switch firmware upgrades from the management controller can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to have the tenant request the approved port from the supported FortiSwitch virtual port pool. For the Alderbridge enterprise network team, the direct corrective action is to have the tenant request the approved port from the supported FortiSwitch virtual port pool.

D:

The offered alternative is: Move to a supported ring or redundant FortiLink topology with verified control-plane continuity. It addresses this separate failure mode: A linear FortiLink chain has single-link failure dependencies for devices beyond the break. In the current case, the observed mechanism is: A port exported to a pool may need a tenant claim step before use. The keyed action, Have the tenant request the approved port from the supported FortiSwitch virtual port pool., targets that condition more directly.

Question 474

At the Alderbridge enterprise network team, a provider offers unused switch ports through a virtual port pool but the tenant expects them to be assigned immediately. Which underlying issue most directly explains this situation?

  1. An outer service VLAN alone cannot classify every intended tenant inner VLAN path
  2. Downstream management discovery depends on operational and permitted upstream switching paths
  3. Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more
  4. A port exported to a pool may need a tenant claim step before use

Explanation

Correct Answer

D:

The problem stems from the fact that a port exported to a pool may need a tenant claim step before use. A correct solution would have the tenant request the approved port from the supported FortiSwitch virtual port pool and check that the claimed port appears in the correct VDOM and is absent from competing tenants.

Incorrect Answers

A:

The offered principle is: An outer service VLAN alone cannot classify every intended tenant inner VLAN path. In the source material it is associated with: An outer service VLAN alone cannot classify every intended tenant inner VLAN path. This case has a different controlling cause: A port exported to a pool may need a tenant claim step before use. Its keyed mechanism is: A port exported to a pool may need a tenant claim step before use.

B:

Downstream management discovery depends on operational and permitted upstream switching paths. That is not the mechanism that accounts for the stated failure at the Alderbridge enterprise network team.

C:

The offered principle is: Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more. In the source material it is associated with: Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more. This case has a different controlling cause: A port exported to a pool may need a tenant claim step before use. Its keyed mechanism is: A port exported to a pool may need a tenant claim step before use.

Question 475

At the Alderbridge enterprise network team, a provider offers unused switch ports through a virtual port pool but the tenant expects them to be assigned immediately. What evidence would justify considering this concern addressed?

  1. The claimed port appears in the correct VDOM and is absent from competing tenants
  2. A test tenant authentication policy works without enabling unsupported port features
  3. A test unknown switch stays unauthorized while the approved unit joins successfully
  4. Two pilot switches apply the same approved baseline while retaining permitted exceptions

Explanation

Correct Answer

A:

This tests the real business behavior: the claimed port appears in the correct VDOM and is absent from competing tenants. It specifically checks whether the risk that a port exported to a pool may need a tenant claim step before use has been reduced.

Incorrect Answers

B:

The offered observation is: A test tenant authentication policy works without enabling unsupported port features. It would support the separate mechanism: Multi-VDOM shared ports expose a defined subset of switch security capabilities. In this case the decisive dependency is: A port exported to a pool may need a tenant claim step before use. The original keyed verification is: The claimed port appears in the correct VDOM and is absent from competing tenants.

C:

A test unknown switch stays unauthorized while the approved unit joins successfully. That result would test a control for this other failure: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The question instead requires evidence for: A port exported to a pool may need a tenant claim step before use. The direct outcome to verify is: The claimed port appears in the correct VDOM and is absent from competing tenants.

D:

The offered observation is: Two pilot switches apply the same approved baseline while retaining permitted exceptions. It would support the separate mechanism: Per-device changes can diverge from an approved baseline and complicate mass maintenance. In this case the decisive dependency is: A port exported to a pool may need a tenant claim step before use. The original keyed verification is: The claimed port appears in the correct VDOM and is absent from competing tenants.

Question 476

At the Alderbridge enterprise network team, a provider offers unused switch ports through a virtual port pool but the tenant expects them to be assigned immediately. How should the organization sustain the improvement?

  1. Audit pool requests and approved port allocations
  2. Review PoE consumption and tenant reservations monthly
  3. Review FortiGate administrator roles each quarter
  4. Monitor time sync status after management network changes

Explanation

Correct Answer

A:

The team should audit pool requests and approved port allocations. That recurring practice targets the same weakness, namely that a port exported to a pool may need a tenant claim step before use.

Incorrect Answers

B:

Review PoE consumption and tenant reservations monthly. That safeguard would help prevent recurrence of: Virtual tenant separation does not create independent physical power supplies. The risk being reviewed here is instead: A port exported to a pool may need a tenant claim step before use. The matching ongoing control is: Audit pool requests and approved port allocations.

C:

That routine supports controller role permissions, but the relevant ongoing risk requires the team to audit pool requests and approved port allocations. For the Alderbridge enterprise network team, the direct corrective action is to have the tenant request the approved port from the supported FortiSwitch virtual port pool.

D:

Monitor time sync status after management network changes. That safeguard would help prevent recurrence of: Unsynchronized switch clocks make event correlation and certificate validation unreliable. The risk being reviewed here is instead: A port exported to a pool may need a tenant claim step before use. The matching ongoing control is: Audit pool requests and approved port allocations.

Question 477

At the Oakport network modernization program, a tenant administrator creates a VLAN in its VDOM but cannot see it on an owned managed switch port. Which approach best resolves the described issue?

  1. Configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port
  2. Use manual serial verification and authorization for switches where onboarding policy requires explicit approval
  3. Create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope
  4. Bring up and validate the supported upstream FortiLink path before onboarding dependent devices

Explanation

Correct Answer

C:

This solution addresses the stated limitation: tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. Implementing it means the team should create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope, then verify that a tenant endpoint gets its authorized subnet from the correct exported port.

Incorrect Answers

A:

Configure supported cross-VDOM VLAN use and authorized tagging on the shared physical port can be useful for another FortiSwitch 7.6 administration workflow, but it leaves the immediate failure unresolved. Here the priority is to create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope. For the Oakport network modernization program, the direct corrective action is to create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope.

B:

The offered action is: Use manual serial verification and authorization for switches where onboarding policy requires explicit approval. It is associated with this separate technical condition: Unreviewed automatic authorization can admit a connected switch before identity and installation are checked. The actual incident concerns a different dependency: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. The corresponding change is: Create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope.

D:

Bring up and validate the supported upstream FortiLink path before onboarding dependent devices addresses a different kind of problem: downstream management discovery depends on operational and permitted upstream switching paths. Here the reported weakness is that tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. For the Oakport network modernization program, the direct corrective action is to create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope.

Question 478

At the Oakport network modernization program, a tenant administrator creates a VLAN in its VDOM but cannot see it on an owned managed switch port. Which explanation best accounts for the concern?

  1. Virtual tenant separation does not create independent physical power supplies
  2. Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements
  3. Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation
  4. The documented out-of-band mgmt-port Layer 3 mode supports a single FortiSwitch island member

Explanation

Correct Answer

B:

The problem stems from the fact that tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. A correct solution would create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope and check that a tenant endpoint gets its authorized subnet from the correct exported port.

Incorrect Answers

A:

The offered principle is: Virtual tenant separation does not create independent physical power supplies. In the source material it is associated with: Virtual tenant separation does not create independent physical power supplies. This case has a different controlling cause: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. Its keyed mechanism is: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements.

C:

The offered principle is: Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. In the source material it is associated with: Mixed FortiGate ownership within one routed FortiSwitch island violates the topology limitation. This case has a different controlling cause: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. Its keyed mechanism is: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements.

D:

The documented out-of-band mgmt-port Layer 3 mode supports a single FortiSwitch island member. That may occur elsewhere, but the evidence at the Oakport network modernization program instead points to the fact that tenant VLAN existence and FortiSwitch port export are distinct configuration requirements.

Question 479

At the Oakport network modernization program, a tenant administrator creates a VLAN in its VDOM but cannot see it on an owned managed switch port. Which test result best shows the requirement is met?

  1. The retired tenant cannot access the port and the replacement tenant gets a clean configuration
  2. A tenant endpoint gets its authorized subnet from the correct exported port
  3. Both connected units remain manageable and no duplicate traffic loop occurs
  4. A test discovers both switches over the corrected point-to-point transport

Explanation

Correct Answer

B:

This is the relevant acceptance result: a tenant endpoint gets its authorized subnet from the correct exported port. It demonstrates the outcome of choosing to create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope.

Incorrect Answers

A:

The retired tenant cannot access the port and the replacement tenant gets a clean configuration. That result would test a control for this other failure: A stale VDOM port assignment leaves residual tenant access and operational ownership. The question instead requires evidence for: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. The direct outcome to verify is: A tenant endpoint gets its authorized subnet from the correct exported port.

C:

Both connected units remain manageable and no duplicate traffic loop occurs. That result would test a control for this other failure: Multiple bridged management uplinks can create loops without supported topology constraints. The question instead requires evidence for: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. The direct outcome to verify is: A tenant endpoint gets its authorized subnet from the correct exported port.

D:

At the Oakport network modernization program, a result about point to point tpid compatibility would not show that the team corrected the failure where tenant VLAN existence and FortiSwitch port export are distinct configuration requirements.

Question 480

At the Oakport network modernization program, a tenant administrator creates a VLAN in its VDOM but cannot see it on an owned managed switch port. Which ongoing control best prevents this issue from recurring?

  1. Reconcile switch-port VDOM ownership after tenant moves
  2. Reassess topology only when availability requirements grow
  3. Document root and tenant responsibilities for VLAN changes
  4. Review split interface behavior after changing aggregation

Explanation

Correct Answer

C:

After implementation, the team should document root and tenant responsibilities for VLAN changes as the appropriate recurring safeguard against the identified issue.

Incorrect Answers

A:

That routine supports tenant port export, but the relevant ongoing risk requires the team to document root and tenant responsibilities for VLAN changes. For the Oakport network modernization program, the direct corrective action is to create the supported tenant VLAN interface referencing the owning FortiLink transport and assign it through the proper scope.

B:

Reassess topology only when availability requirements grow. That safeguard would help prevent recurrence of: A simple managed site can be operated without unnecessary high-availability interconnections. The risk being reviewed here is instead: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. The matching ongoing control is: Document root and tenant responsibilities for VLAN changes.

D:

Review split interface behavior after changing aggregation. That safeguard would help prevent recurrence of: Split-interface redundancy intentionally limits active forwarding until a supported MCLAG state permits more. The risk being reviewed here is instead: Tenant VLAN existence and FortiSwitch port export are distinct configuration requirements. The matching ongoing control is: Document root and tenant responsibilities for VLAN changes.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests